Scribd
Upload
108 views23 pages

Elementz - 0090361001471677156bt Pick and Place Robot - PPT

This document describes a Bluetooth controlled pick and place robot. The robot receives commands via Bluetooth from an Android application to control its movement. The robot uses an Arduino Uno microcontroller connected to a Bluetooth module to receive commands from the Android app and control a DC motor driver and DC motor. The robot demonstrates how a smartphone can wirelessly control a microcontroller and robotic device using Bluetooth communication.

Uploaded by

Vasanth kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views23 pages

Elementz - 0090361001471677156bt Pick and Place Robot - PPT

This document describes a Bluetooth controlled pick and place robot. The robot receives commands via Bluetooth from an Android application to control its movement. The robot uses an Arduino Uno microcontroller connected to a Bluetooth module to receive commands from the Android app and control a DC motor driver and DC motor. The robot demonstrates how a smartphone can wirelessly control a microcontroller and robotic device using Bluetooth communication.

Uploaded by

Vasanth kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

BLUETOOTH CONTROLLED

PICK & PLACE ROBOT


Overview

• Introduction
• Block Diagram
• Hardware Requirements
• Software used
• Advantages
• Applications
• References
Introduction
• Build a robot which can receive commands via
bluetooth and work accordingly.
• Develop an android app which allows the user to
sends commands via bluetooth.
• Commands received by bluetooth modem connected
to Arduino UNO.
• Arduino controls motor which allow the movement of
robot.
Block Diagram
Hardware requirements

• Arduino Uno
• Bluetooth Module HC-05
• DC Motor Driver L293D
• DC Motor
• Power Supply
Arduino UNO

• Microcontroller board based on the ATmega328P.


• 14 digital input/output pins (of which 6 can be
used as PWM outputs)
• 6 analog inputs.
• 16 MHz quartz crystal
• A power jack
• Connect it to a computer with a USB cable or
power it with a AC-to-DC adapter or battery to
get started.
The board...
Bluetooth Module (HC-05)

• For the communication between mobile phone


and microcontroller Bluetooth module(HC-05) is used
• Low Power 1.8V Operation ,1.8 to 3.6V I/O .
• Serial port Bluetooth module have a Bluetooth 2.0+EDR
(enhanced data rate), 3Mbps modulation with complete
2.4GHZ radio transceiver and baseband.
• Using Bluetooth profile and android platform architecture
different type of Bluetooth applications can be developed.
DC Motor Driver(L293D)

• L293D has quadruple high current half-H drivers.


• Wide Supply-Voltage Range: 4.5 V to 36 V
• High-Noise-Immunity Inputs
• Output Current 600mA Per Channel
• Peak Output Current 1.2A Per Channel.
Pin Diagram
Circuit Diagram
DC Motor

• 10 to 200RPM 12V DC motors with Gearbox


• 6mm shaft diameter with internal hole
• No-Load Current=60mA(max)
• Load Current=300mA(max)
Power Supply
Android

• Android is an open-source operating system which means


that any manufacturer can use it in their phones free of
charge.
• It was built to be truly open.
• Android is built on the open Linux Kernel. Furthermore,
it utilizes a custom JAVA virtual machine
Android Application on Mobile Phones

• An android app is meant for phones with an android


based operating systems. They can be downloaded from
the android app Market which is pre-loaded on every
android phone.
• Blue control APP and Bluetooth Spp APP are some
examples.
Android Application Operated Bluetooth

• The Android platform includes support for the Bluetooth


network stack, which allows a device to wirelessly
exchange data with other Bluetooth devices.
• The application framework provides access to the
Bluetooth functionality through the Android Bluetooth
APIs.
Android Application

BlueStick
Software Used..

• Arduino IDE
• Eclipse Android SDK(Software Development
Kit)

Programming Languages Used..

• Embedded C/C++
• Java & XML
Advantages
• It is feasible to implement bluetooth communication
between smart phone and microcontroller.
• The development of apps for Android in Android
SDK is easy and free of cost.
Applications
• It can be used in various industries where human
intervention is not desired.
• Robot is used Place the things in correct Order and this
can be used in Homes and Industry to place things
• Robot is also used in Libraries to Place the books in
correct order
• With tremendous smart phone in markets, it is bound to
have many more applications in near future.
References

• www.arduino.org

• www.beyondlogic.org

• www.wikipedia.org

• www.elementzonline.com

• www.elementztechblog.wordpress.com
Questions????
THANK YOU

You might also like