Series 10 and 20

Overshots
Manual A110
 Co n t e n t s

Series 10 Sucker Rod Overshots

Overview................................................................................ 2
Construction .......................................................................... 2
Operation............................................................................... 2
Engaging a Fish..................................................................... 2
Releasing a Fish.................................................................... 2
Precautions............................................................................ 2
Maintenance .......................................................................... 2
Disassembly ...................................................................... 2
Ordering Information.............................................................. 2
Illustration .............................................................................. 3
Complete Assemblies and Parts Lists ............................. 4 – 6
Calculated Strengths ............................................................. 7

Series 20 Short Catch Sucker Rod Overshots

Overview................................................................................ 8
Construction .......................................................................... 8
Operation............................................................................... 8
Engaging a Fish..................................................................... 8
Releasing a Fish.................................................................... 8
Precautions............................................................................ 8
Maintenance .......................................................................... 8
Disassembly ...................................................................... 8
Ordering Information.............................................................. 8
Illustration .............................................................................. 9
Complete Assemblies and Parts Lists ................................. 10
Calculated Strengths ........................................................... 11
Dimensions and Calculated Strengths ................................ 12

L EGA L N OT I CE
All references to Bowen® part numbers in this literature are
used to identify interchangeable tools and parts. Reference to
such tools and parts does not imply that Logan Oil Tools is a
licensee or is in any way affiliated with National Oilwell Varco.
Logan Oil Tools does not sell, or offer to sell, National Oilwell
Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

3rd Printing, August 2012. Rev. 2

L o g a n Se r i e s 1 0 & 2 0 Su c k e r Ro d Ove r s h o t s • 1

Manual A110 • Logan Series 20 Sucker Rod Overshots • Page 1

OV ERV I EW Before making up the overshot on the PRECAU T I ON S
fishing string and running it into the
The Logan Series 10 Sucker Rod Over- Never rotate the fishing string to the
well, be sure the overshot is properly
shot is a small, effective tool designed right while the overshot is engaged
assembled and dressed with the proper
for engaging and retrieving sucker rods, with the fish unless an upward strain
size grapple. Check to make sure all
couplings, and other items from inside is maintained.
of the parts are in working order. Refer
tubing strings.
to the drawings on page 3. Before starting releasing operations,
always bump down the full weight of
CON ST RU CT I ON
EN GAGI N G A FI SH the fishing string.
The Series 10 Sucker Rod Overshot
Dress the overshot with the proper type
consists of a top sub, bowl, grapple, M A I N T EN A N CE
and size of grapple. Attach the overshot
and a guide. Depending on the diam-
to the bottom end of the fishing string After each use, the tool should be
eter of the fish, either a spiral or basket
and run it into the hole. As the overshot disassembled, inspected, repaired as
grapple will be used. Fish diameters
nears the top of the fish, slowly rotate required and reassembled. Mainte-
near the maximum catch limits require
the overshot to the right as it is lowered nance is simple, but important.
the use of a spiral grapple and a control
over the fish. This combination of rotat-
guide. Fish diameters that are substan- Disassembly
ing and lowering is important.
tially below the maximum catch limits of 1. Using a vise, clamp the bowl
the overshot require a basket grapple, After the fish is engaged, allow right- between the threaded ends.
a basket grapple control, and a plain hand torque to release from the fishing Remove the top sub and guide
guide. string. Raise the fish by pulling upward by breaking loose the threaded
on the fishing string. connections between the top sub
OPERAT I ON and guide.
Sinker bars should be used for weight
After the Overshot has reached the top to force the overshot down onto the fish CAU T I ON : Excessive force can
of the fish, combined rotation and lower- if wireline is used for the fishing string. distort or crack the bowl. Use only
ing results in the following: There will be no releasing effect with enough gripping action in the vise to
wireline because the overshot cannot break the connections. Avoid making
1. The guide directs the fish into the
be rotated. heavy tool marks on the bowl.
overshot.
2. Using right-hand rotation, unscrew
2. The grapple expands and the fish REL EA SI N G A FI SH
and remove the grapple from the
passes into it until it reaches the pin
Bump down or drop the weight of the bowl. If the grapple is a basket type,
section of the top sub.
fishing string against the overshot to the control must first be lifted out
3. The fish is now properly positioned break the hold of the grapple within through the bottom of the assembly.
in the overshot. The tapers of the the bowl. Elevate the fishing string while
Before reassembly, inspect all parts,
bowl will contract the grapple and slowly rotating it to the right until the
especially the grapple. Grease
securely hold the fish when upward overshot has cleared the fish. The com-
the parts as they are reassembled.
pull is exerted on the string. bination of rotation and elevation
Check the wickers for damage
is important.
A sharp downward bump positions and wear to ensure safe operation.
the largest portion of the bowl tapers To release from a recovered fish, hold Grease or paint the exterior to pre-
opposite the grapple thereby break- the fish below the overshot and follow vent corrosion.
ing the hold. Right-hand rotation the same procedure.
expands the grapple and the over- ORDERI N G I N FORM AT I ON
shot can then be withdrawn from the
When ordering, please specify:
fish.
(1) Complete assembly or part number
(2) Top sub connection
(3) Size and type of fish to be caught
(4) O.D., if other than standard

2 • L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s

Page 2 • Logan Series 10 Sucker Rod Overshots • Manual A110

 SERI ES 1 0 SU CK ER ROD OV ERSH OT S

Top Sub Top Sub

Bowl Bowl

Basket Grapple Spiral Grapple

Basket Grapple Control

Plain Guide Control Guide

Basket Grapple Assembly Spiral Grapple Assembly

Logan Oil Tools reserves the right to change or discontinue designs without notice.

L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s • 3

Manual A110 • Logan Series 10 Sucker Rod Overshots • Page 3

SERI ES 1 0 SU CK ER ROD OV ERSH OT S

MAXIMUM CATCH SIZE (Spiral) 1-1/16 1-1/4 1-3/8 1-1/2 1-1/2 1-5/8 1-5/8
MAXIMUM CATCH SIZE (Basket) 7/8 1-1/16 1-3/16 1-5/16 1-5/16 1-7/16 1-7/16
OVERSHOT O.D. 1-9/16 1.43 1-21/32 1-25/32 1-29/32 1-29/32 2-5/16
TYPE FS SH SH SH SH SH FS
STANDARD TOP CONNECTION 3/4 Rod 3/4 Rod 3/4 Rod 3/4 Rod 3/4 Rod 3/4 Rod 7/8 Rod
COM PL ET E A SSEM B LY Logan Part No. 110-156-A 110-143-D 110-166-D 110-178-D 110-190-D 110-191-D 110-231-A
Bowen No. 9790 17985 16490 13940 9990 9340 9880

SPI RA L COM PON EN T PA RT S

TOP SUB Logan Part No. B1000 B1001 B10015 B1002 B1004 B1004 B1004
Bowen No. 9791 17986 16491 13941 9341 9341 9341
BOWL Logan Part No. B2000 B2001 B20015 B2002 B2003 B2004 B2005
Bowen No. 9792 17987 16492 13942 9991 9342 9881
SPIRAL GRAPPLE Logan Part No. B3000 B3001 B30015 B3002 B3003 B3004 B3004
Bowen No. 9793 17988 16493 13943 9992 9343 9343
SPIRAL GRAPPLE CONTROL Logan Part No. … … … … … … …
Bowen No. … … … … … … …
CONTROL GUIDE Logan Part No. B4000 B4001 B40015 B4002 B4003 B4004 B4005
Bowen No. 9796 17989 16496 13945 9993 9349 9883
GUIDE (CUT LIPPED) Logan Part No. … … B80015 … B4003 … …
Bowen No. … … 16496 … 9993 … …

BA SK ET COM PON EN T PA RT S
BASKET GRAPPLE Logan Part No. B5000 B5001 B50015 B5002 B5003 B5004 B5004
Bowen No. 9793 17988 16493 13943 9992 9343 9343
BASKET GRAPPLE CONTROL Logan Part No. B6000 B6001 B60015 B6002 B6003 B6004 B6005
Bowen No. 9794 18003 16494 13947 9993 9344 153338
PLAIN GUIDE Logan Part No. B7000 B7001 B70015 B7002 B7003 B7004 B7005
Bowen No. 9795 18004 16498 13944 9994 9345 9882

Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: Grapples are available in 1/16" intervals.

When ordering, please specify: Logan Coding

(1) Complete assembly or part number A = FS Full Strength – For all pulling torsional and jarring strain
(2) Top Sub connection B = XFS Extra Full Strength – For extreme abuse
(3) Size and type of fish to be caught C = SFS Semi Full Strength – Maximum strength for special hole conditions
(4) O.D., if other than standard D = SH Slim Hole – For heavy pulling strains only
E = XSH Extra Slim Hole – For pick up jobs only
Recommended Spare Parts:
(1) Spiral: 2 Grapples, 1 Control LEGAL NOTICE
(2) Basket: 2 Grapples, 1 Control All references to Bowen® part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

4 • L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s
Page 4 • Logan Series 10 Sucker Rod Overshots • Manual A110
SERI ES 1 0 SU CK ER ROD OV ERSH OT S

MAXIMUM CATCH SIZE (Spiral) 1-9/16 1-3/4 1-3/4 1-13/16 1-13/16 1-15/16 2
MAXIMUM CATCH SIZE (Basket) 1-3/8 1-9/16 1-7/16 1-5/8 1-5/8 1-3/4 1-13/16
OVERSHOT O.D. 1-27/32 2-1/16 2-1/16 2-1/8 2-5/16 2-1/4 2-5/16
TYPE SH SH SH SH SFS SH SH
STANDARD TOP CONNECTION 5/8 Rod 5/8 Rod 7/8 Rod 7/8 Rod 7/8 Rod 7/8 Rod 7/8 Rod
COM PL ET E A SSEM B LY Logan Part No. 110-184-D 110-206-D 110-207-D 110-213-D 110-231-C 110-225-D 110-231-D
Bowen No. 36423 54178 * 156309 27765 11480 16070 9400

SPI RA L COM PON EN T PA RT S

TOP SUB Logan Part No. B10051 B10053 B10054 B10052 B1006 B1007 B1008
Bowen No. 36424 54179 * 156310 27766 11481 16071 9401
BOWL Logan Part No. B20051 B20053 B20054 B20052 B2006 B2007 B2008
Bowen No. 36425 54180 * 156311 27767 11482 16072 9402
SPIRAL GRAPPLE Logan Part No. B30051 B30053 B30054 B30052 B3006 B3007 B3008
Bowen No. 36436 54181 156312 27768 11483 16073 9403
CONTROL GUIDE Logan Part No. B40051 B40053 B40054 B40052 B4006 B4007 B4008
Bowen No. 36427 54184 156313 27764 11484 16076 9406
SPIRAL GRAPPLE CONTROL Logan Part No. … … … … … … …
Bowen No. … … … … … … …
GUIDE (CUT LIPPED) Logan Part No. … … … … … … …
Bowen No. … … … … … … …

BA SK ET COM PON EN T PA RT S
BASKET GRAPPLE Logan Part No. B50051 B50053 B50054 B50052 B5006 B5007 B5008
Bowen No. 36436 54181 156312 27768 11483 16073 9403
BASKET GRAPPLE CONTROL Logan Part No. B60051 B60053 B60053 B60052 B6006 B6007 B6008
Bowen No. 36437 54182 54182 27763 11485 16074 9405
PLAIN GUIDE Logan Part No. B70051 B70053 B70054 B70052 B7006 B7007 B7008
Bowen No. 36426 54183 156333 27769 11486 16075 9404

Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: Grapples are available in 1/16" intervals.

When ordering, please specify: Logan Coding

(1) Complete assembly or part number A = FS Full Strength – For all pulling torsional and jarring strain
(2) Top Sub connection B = XFS Extra Full Strength – For extreme abuse
(3) Size and type of fish to be caught C = SFS Semi Full Strength – Maximum strength for special hole conditions
(4) O.D., if other than standard D = SH Slim Hole – For heavy pulling strains only
E = XSH Extra Slim Hole – For pick up jobs only
Recommended Spare Parts:
(1) Spiral: 2 Grapples, 1 Control LEGAL NOTICE
(2) Basket: 2 Grapples, 1 Control All references to Bowen® part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s • 5

Manual A110 • Logan Series 10 Sucker Rod Overshots • Page 5

SERI ES 1 0 SU CK ER ROD OV ERSH OT S

MAXIMUM CATCH SIZE (Spiral) 2 2-3/8

MAXIMUM CATCH SIZE (Basket) 1-13/16 2-3/16
OVERSHOT O.D. 2-7/8 2-27/32
TYPE FS SH
STANDARD TOP CONNECTION 7/8 Rod 7/8 Rod
COM PL ET E A SSEM B LY Logan Part No. 110-287-A 110-284-D
Bowen No. 9530 15860

SPI RA L COM PON EN T PA RT S

TOP SUB Logan Part No. B1009 B1010
Bowen No. 9531 15863
BOWL Logan Part No. B2009 B2010
Bowen No. 9532 15861
SPIRAL GRAPPLE Logan Part No. B3008 B3010
Bowen No. 9403 9872
CONTROL GUIDE Logan Part No. B4009 …
Bowen No. 9535 …
SPIRAL GRAPPLE CONTROL Logan Part No. … B8000
Bowen No. … 9873
GUIDE (CUT LIPPED) Logan Part No. … B8001
Bowen No. … 15862

BA SK ET COM PON EN T PA RT S
BASKET GRAPPLE Logan Part No. B5008 B5010
Bowen No. 9403 9872
BASKET GRAPPLE CONTROL Logan Part No. B6008 B6010
Bowen No. 9405 9873
PLAIN GUIDE Logan Part No. B7009 B7010
Bowen No. 9533 15862

Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: Grapples are available in 1/16" intervals.

When ordering, please specify: Logan Coding

(1) Complete assembly or part number A = FS Full Strength – For all pulling torsional and jarring strain
(2) Top Sub connection B = XFS Extra Full Strength – For extreme abuse
(3) Size and type of fish to be caught C = SFS Semi Full Strength – Maximum strength for special hole conditions
(4) O.D., if other than standard D = SH Slim Hole – For heavy pulling strains only
E = XSH Extra Slim Hole – For pick up jobs only
Recommended Spare Parts:
(1) Spiral: 2 Grapples, 1 Control LEGAL NOTICE
(2) Basket: 2 Grapples, 1 Control All references to Bowen® part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

6 • L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s

Page 6 • Logan Series 10 Sucker Rod Overshots • Manual A110

 L o g a n Se r i e s 1 0 Ove r s h o t Ca l c u l at e d St r e n g t h s
MAXIMUM LOAD CAPACITY @ YIELD POINT (LBS) MAX. MAKE-UP TORQUE
BOWL NO. CATCH SIZE CATCH SIZE 50% OF YIELD (FT/LBS)
LOGAN BOWEN SPIRAL BASKET O.D. (IN) SPIRAL GRAPPLE BASKET GRAPPLE (IN) WITHOUT STOP TOP SUB TO BOWL BOWL TO GUIDE
B2001 17987 1-1/4 1-1/16 1-7/16 16,500 1-1/16 down 11,500 100 95
1-3/16 down to, but not including 1" 28,500
B20015 16492 1-3/8 1-3/16 1-21/32 39,100 235 145
1" down 18,000
1-5/16 down to, but not including 1" 28,500
B2002 13942 1-1/2 1-5/16 1-25/32 39,500 315 170
1" down 18,000
B2003 9991 1-1/2 1-5/16 1-29/32 83,800 1-5/16 down 38,200 350 235
1-7/16 down to, but not including 1" 28,500
B2004 9342 1-5/8 1-7/16 1-29/32 39,500 375 225
1" down 18,000
1-7/16 down to, but not including 1" 93,900
B2005 9881 1-5/8 1-7/16 2-5/16 138,100 1,750 535
1" down 59,400
1-3/8 down to, but not including 1" 28,500 … …
B20051 36425 1-9/16 1-3/8 2-27/32 39,500
1" down 18,000
1-5/8 down to, but not including 1" 40,100
B20052 27767 1-13/16 1-5/8 2-9/64 55,700 575 175
1" down 25,400
1.660 down to, but not including 1-1/8 85,100
B2006 11482 1-13/16 1-5/8 2-5/16 118,100 1,050 445
1-1/8 down 53,800
1-3/4 down to, but not including 1-1/8 40,100
B2007 16072 1-15/16 1-3/4 2-1/4 55,700 650 335
1-1/8 down 25,400
1-13/16 down to, but not including 1-1/8 40,100
B2008 9402 2 1-13/16 2-5/16 55,700 740 240
1-1/8 down 25,400
1-13/16 down to, but not including 1-1/8 144,400
B2009 9532 2 1-13/16 2-7/8 200,400 3,200 1,050
1-1/8 down 91,300
2-3/16 down to, but not including 1-1/8 51,100
B2010 15861 2-3/8 2-3/16 2-27/32 70,000 1,850 500
1-1/8 down 37,700

All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume straight, steady pull and full grapple engagement of a round fish.
Anything less than full engagement or straight pulling, will reduce the listed strength.

Tong marks or other damage to the bowl surface will also reduce the listed strength.

All torque calculations are theoretical maximum tightening torques for the threaded connection and do not include clamping force. Clamping force is not considered
due to the variety of devices used to tighten these connections.

CAUTION: Due to the amount of torque applied to a connection and the type of device used to apply the torque, damage to the bowl, top sub, or guide may occur.
LEGAL NOTICE
All references to Bowen® part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan
Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

L o g a n Se r i e s 1 0 Su c k e r Ro d Ove r s h o t s • 7

Manual A110 • Logan Series 10 Sucker Rod Overshots • Page 7

OV ERV I EW A sharp downward bump positions M A I N T EN A N CE
the largest portion of the bowl tapers
Logan Series 20 Short Catch Sucker After each use, the tool should be
opposite the grapple thereby break-
Rod Overshots are designed for condi- disassembled, inspected, repaired
ing the hold. Right-hand rotation
tions when sucker rods, couplings, and as required and reassembled. Main-
expands the grapple and the over-
other portions of a fish are too short for tenance is simple, but important.
shot can then be withdrawn from the
retrieval with a standard overshot.
fish. Disassembly
1. Using a vise, clamp the bowl
CON ST RU CT I ON Before making up the overshot on the
between the threaded ends.
fishing string and running it into the
The Logan Series 20 Short Catch Remove the top sub and guide
well, be sure the overshot is properly
Sucker Rod Overshot consists of a top by breaking loose the threaded
assembled and dressed with the proper
sub, bowl, basket grapple control, and connections between the top sub
size grapple. Check to make sure all
a basket grapple. The grapple control and guide.
of the parts are in working order. Refer
is located at the top end of the tool
to the drawing on page 9. CAU T I ON : Excessive force can
between the top sub and the basket
distort or crack the bowl. Use only
grapple. The position of the grapple
EN GAGI N G A FI SH enough gripping action in the vise
control above the basket grapple rather
to break the connections. Avoid mak-
than below it allows the basket grapple Dress the overshot with the proper type
ing heavy tool marks on the bowl.
to occupy the lowest position in the and size of grapple. Attach the overshot
bowl. This permits the exposed part to the bottom end of the fishing string 2. Using right-hand rotation, unscrew
of the fish to enter the basket grapple and run it into the hole. Gradually lower and remove the grapple from the
where it can be firmly and securely the overshot over the fish. As the over- bowl. If the grapple is a basket type,
grasped. shot nears the top of the fish, slowly the control must first be lifted out
rotate it to the right to engage the fish. through the top.
OPERAT I ON After the fish is engaged, allow right-
Before reassembly, inspect all parts,
hand torque to release from the fishing
Operation of the Logan Series 20 Short especially the grapple. Grease
string. Then raise the fish by pulling
Catch Sucker Rod Overshot is the the parts as they are reassembled.
upward on the fishing string.
same as the Logan Series 10 Sucker Check the wickers for damage
Rod Overshot. and wear to ensure safe operation.
REL EA SI N G A FI SH
Grease or paint the exterior to pre-
After the Overshot has reached the top
Bump down or drop the weight of the vent corrosion.
of the fish, combined rotation and lower-
fishing string against the overshot to
ing results in the following:
break the hold of the grapple within the ORDERI N G I N FORM AT I ON
1. The guide directs the fish into the bowl. Elevate the fishing string while
When ordering, please specify:
overshot. slowly rotating it to the right until the
(1) Complete assembly or part number
overshot has cleared the fish.
2. The grapple expands and the fish (2) Top sub connection
passes into it until it reaches the pin (3) Size and type of fish to be caught
PRECAU T I ON S
section of the top sub. (4) O.D., if other than standard
Never rotate the fishing string to the
3. The fish is now properly positioned
right while the overshot is engaged
in the overshot. The tapers of the
with the fish unless an upward strain
bowl will contract the grapple and
is maintained.
securely hold the fish when upward
pull is exerted on the string. Before starting releasing operations,
always bump down the full weight of
the fishing string.

8 • L o g a n Se r i e s 2 0 Sh o r t Cat c h Su c k e r Ro d Ove r s h o t s

Page 8 • Logan Series 20 Sucker Rod Overshots • Manual A110

 SERI ES 2 0 SH ORT CATCH SU CK ER ROD OV ERSH OT S

Top Sub

Basket Grapple Control

Bowl

Basket Grapple

Logan Oil Tools reserves the right to change or discontinue designs without notice.

L o g a n Se r i e s 2 0 Sh o r t Cat c h Su c k e r Ro d Ove r s h o t s • 9

Manual A110 • Logan Series 20 Sucker Rod Overshots • Page 9

SERI ES 2 0 SH ORT CATCH SU CK ER ROD OV ERSH OT S

MAXIMUM CATCH SIZE (Basket) 7/8 1 1-1/4 1-3/8 1-1/2 1-3/4 1-13/16
OVERSHOT O.D. 1-1/4 1-3/8 1-5/8 1-3/4 1-29/32 2-1/4 2-5/16
TYPE * SH SH SH SH SH SH SH
STANDARD TOP CONNECTION 5/8 Rod 5/8 Rod 5/8 Rod 3/4 Rod 3/4 Rod 7/8 Rod 7/8 Rod
COM PL ET E A SSEM B LY Logan Part No. 120-125-D 120-138-D 120-163-D 120-175-D 120-191-D 120-225-D 120-231-D
Bowen No. 17315 25780 28760 18355 11555 47464 17438

BA SK ET COM PON EN T PA RT S
TOP SUB Logan Part No. B1011 B1012 B1013 B1014 B1004 B1007 B1008
Bowen No. 17316 25781 28761 18356 9341 16071 9401
BOWL Logan Part No. B2011 B2012 B2013 B2014 B2015 B20155 B2016
Bowen No. 17317 25782 28762 18357 11556 47465 17439
BASKET GRAPPLE Logan Part No. B3011 B3012 B3013 B3014 B3015 B30155 B3016
Bowen No. 17318 25783 28763 18358 11557 47466 17440
BASKET GRAPPLE CONTROL Logan Part No. B4011 B4012 B4013 B4014 B4015 B40155 B4016
Bowen No. 17319 25784 28764 18359 11558 47467 17441
OVERSIZED GUIDES Logan Part No. … … … … … … B5016
Bowen No. … … … … … … 22276
GUIDE PINS Logan Part No. … … … … … … B6016
Bowen No. … … … … … … 14876
Note: Grapples are available in 1/16" intervals.

MAXIMUM CATCH SIZE (Basket) 2-1/8 2-1/8 2-3/8 2-1/2

OVERSHOT O.D. 2-25/32 2-7/8 3-1/8 3-1/4
TYPE SH FS SH FS
STANDARD TOP CONNECTION 7/8 Rod 2-3/8 Tub 2-3/8 Tub 2-3/8 Tub
COM PL ET E A SSEM B LY Logan Part No. 120-278-D 120-287-A 120-313-D 120-325-A
Bowen No. 18305 20170 20645 22270

BA SK ET COM PON EN T PA RT S
TOP SUB Logan Part No. B1017 B1018 B1019 B1020
Bowen No. 18306 20172 20646 22271
BOWL Logan Part No. B2017 B2018 B2019 B2020
Bowen No. 18307 20171 20647 22272
BASKET GRAPPLE Logan Part No. B3017 B3017 B3019 B3020
Bowen No. 18308 18308 20648 22273
BASKET GRAPPLE CONTROL Logan Part No. B4017 B4017 B4019 B4020
Bowen No. 18309 18309 20649 22274
OVERSIZED GUIDES Logan Part No. … B5018 … B5020
Bowen No. … 20173 … 22275
GUIDE PINS Logan Part No. … B6018 … B6020
Bowen No. … 20174 … 20651

Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: Grapples are available in 1/16" intervals.

When ordering, please specify: Logan Coding

(1) Complete assembly or part number A = FS Full Strength – For all pulling torsional and jarring strain
(2) Top Sub connection B = XFS Extra Full Strength – For extreme abuse
(3) Size and type of fish to be caught C = SFS Semi Full Strength – Maximum strength for special hole conditions
(4) O.D., if other than standard D = SH Slim Hole – For heavy pulling strains only
E = XSH Extra Slim Hole – For pick up jobs only
Recommended Spare Parts:
LEGAL NOTICE
(1) Spiral: 2 Grapples, 1 Control All references to Bowen® part numbers in this literature are used to identify interchangeable tools and parts.
(2) Basket: 2 Grapples, 1 Control Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliat-
ed with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen)
products. “Bowen” is a registered trademark of National Oilwell Varco.
10 • L o g a n Se r i e s 2 0 Sh o r t Cat c h Su c k e r Ro d Ove r s h o t s

Page 10 • Logan Series 20 Sucker Rod Overshots • Manual A110

CA LCU L AT ED ST REN GT H S
MAXIMUM CATCH SIZE (Basket) 7/8 1 1-1/4 1-3/8 1-1/2 1-3/4 1-13/16
NOMINAL OVERSHOT O.D. * 1-9/32 1-13/32 1-5/8 1-3/4 1-29/32 2-1/4 2-5/16
LOAD CAPACITY @ YIELD POINT (lbs) 31,500 31,500 42,200 35,100 41,000 50,298 50,400
BOWL Logan Part No. B2011 B2012 B2013 B2014 B2015 B20155 B2016
Bowen No. 17317 25782 28762 18357 11556 47465 17439
COM PL ET E A SSEM B LY Logan Part No. 120-125-D 120-138-D 120-163-D 120-175-D 120-191-D 120-225-D 120-231-D
Bowen No. 17315 25780 28760 18355 11555 47464 17438

MAXIMUM CATCH SIZE (Basket) 2-1/8 2-1/8 2-3/8 2-1/2

NOMINAL OVERSHOT O.D. * 2-25/32 2-7/8 3-1/8 3-1/4
LOAD CAPACITY @ YIELD POINT (lbs) 102,300 101,800 127,000 127,000
BOWL Logan Part No. B2017 B2018 B2019 B2020
Bowen No. 18307 20171 20647 22272
COM PL ET E A SSEM B LY Logan Part No. 120-278-D 120-287-A 120-313-D 120-325-A
Bowen No. 18305 20170 20645 22270

NOTE: Strengths are theoretical yield points that are accurate within 20%.
Strengths assume full grapple engagement of a round fish and a straight, steady pull.
Anything less than full engagement or steady, straight pulling will reduce the listed strength.

* Check the actual tool OD if the tool is to be run through a tight clearance.

LEGAL NOTICE
All references to Bowen® part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.

“Bowen” is a registered trademark of National Oilwell Varco.

L o g a n Se r i e s 2 0 Sh o r t Cat c h Su c k e r Ro d Ove r s h o t s • 11

Manual A110 • Logan Series 20 Hydraulic Release Overshots • Page 11

 W A

C P F N ROD O.D.

L DIAMETER OF BEAD
DOES NOT EXCEED “ F”

DI M EN SI ON S A N D CA LCU L AT ED ST REN GT H S

ROD SIZE — INCHES 1/2 5/8 3/4 7/8 1 1-1/8

A — PIN LENGTH 1 1-1/8 1-3/8 1-3/8 1-3/4 2
C — FULL SIZED COUPLING O.D. 1 1-1/2 1-5/8 1-13/16 2-3/16 or 2 * 2-3/8
F — SHOULDER O.D. 1 1-3/8 1-1/2 1-5/8 2 2-1/4
L — MINIMUM LENGTH 2-3/4 4 4 4 4 4-1/2
N — WRENCH FLAT 5/8 7/8 1 1 1-5/16 1-1/2
P — PIN O.D. 3/4 15/16 1-1/16 1-3/16 1-3/8 1-9/16
W — COUPLING WRENCH FLAT WIDTH 3/4 1-3/8 1-1/2 1-5/8 1-7/8 2-1/8
THREAD 3/4 10 thd 15/16 10 thd 1-1/16 10 thd 1-3/16 10 thd 1-3/8 10 thd 1-9/16 10 thd

* Used when running 1-inch rods in 2-7/8" tubing; 2-3/16" is standard.

ST REN GT H TA B L E

ROD SIZE — INCHES 1/2 5/8 3/4 7/8 1

ROD AREA 0.196 0.306 0.442 0.601 0.785
BASED ON:
J&L Type 7 with ultimate tensile strength Yield 16,000 21,400 30,900 42,100 55,000
of 86,000 and yield of 70,000 psi Ultimate 20,000 26,300 38,000 51,700 67,500
Torque * 70 140 171 381 570
J&L Type 2 with ultimate tensile strength Yield … 19,900 28,700 39,100 51,000
of 100,000 and yield of 65,000 psi Ultimate … 30,600 44,200 60,100 78,500
Torque * 65 130 159 353 530
J&L Type 1 with ultimate tensile strength Yield … 20,900 30,300 41,200 53,800
of 100,000 and yield of 65,000 psi Ultimate … 30,600 44,200 60,100 78,500
Torque * 68-1/2 136 168 372 560
J&L Type 12 with ultimate tensile strength Yield … 29,400 42,300 57,700 75,300
of 120,000 and yield of 96,000 psi Ultimate … 37,700 53,000 72,000 94,200
Torque * 96 192 235 476 783

* Torque based on rod O.D. @ yield.

12 • L o g a n Se r i e s 2 0 Sh o r t Cat c h Su c k e r Ro d Ove r s h o t s

Page 12 • Logan Series 20 Hydraulic Release Overshots • Manual A110

 U.S. SALES OFFICES
 California
3155 Pegasus Drive
Bakersfield, CA 93308-6800
661.387.1449 I Fax 661.387.1624
INTERNATIONAL
 Louisiana STOCKING DISTRIBUTORS
103 Bluffwood Drive
Broussard , LA 70518-3310  Canada
337.839.2331 I Fax 337.839.2334 Logan Oil Tools
9755 45th Avenue NW
118 Common Court
Edmonton , Alberta T6E 5V8
Houma, LA 70360-7982
780.433.9957 I Fax 780.468.1979
985.868.7333 I Fax 985.868.7007
 Colombia
 North Dakota
Logan Oil Tools Sucursal Colombia
4925 Highway 85 South
Calle 113 No. 7-21
Williston , ND 58801
Edificio Teleport Business Park
701.572.0565 I Fax 701.572.0644
Torre A, Oficina 915
CORPORATE Oklahoma
Bogota, Colombia
HEADQUARTERS (57.1 ).629.1995 I Fax (57.1 ).612.8357
424 South Eagle Lane
Oklahoma City, OK 73128-4225
A Singapore
Logan International Inc. 405.782.0625 I Fax 405.782.0760
Logan Oil Tools Pte Ltd
7850 North Sam Houston Parkway West, 54 Loyang Way
Suite 100  Pennsylvania
Singapore 508747
Houston, Texas 77064 244 Grey Fox Drive, Suite 1
65.65428422 I Fax 65.65420477
+1 832 386 2500 Montoursville , PA 17754-9572
570.546.1066 I Fax 570.546.0388
 United Arab Emirates
635 8th Avenue Southwest Logan Oil Tools
Suite 850  Texas
Jebel Ali Free Zone (South)
Calgary, Canada T2P 3M3 1519 South Flournoy
P.O. Box 23724
403 930 6810 | Fax 403 930 6811 Alice TX,78332
Dubai, UAE
361.396.0139 I Fax 361.396.0112
971.4.813.8000 I Fax 971.4.813.8001
11610 Cutten Road
Houston, TX 77066-3008  Woodhouse International
832.602.2134 I Fax 832.286.4117 P.O. Box 23724
Dubai, UAE
11006 Lucerne Street 971.4.347.2300 I Fax 971.4.347.4642
Houston, Texas 77016-1920
281.219.6613 I Fax 281.219.6638  United Kingdom
Logan Oil Tools, U.K. Ltd.
1305 Energy Drive
Unit C1 Kintore Business Park
Kilgore, TX 75662-5539
Kintore, lnverurie
903.984.6700 I Fax 903.984.6755
Aberdeenshire AB51 OYQ
601 McDonald Scotland
Odessa, TX 79761-6106 +44.1467.631190
432.580.7414 I Fax 432.580.7656

 Utah
1369 South 1100 East
Vernal, UT 84078-8600
435.781.2856 I Fax 435.781.2858

©2014 Logan Oil Tools

12/2014