0% found this document useful (0 votes)
217 views5 pages

Kinetix 5700 Alarm Codes Overview

This document contains a list of alarm codes and descriptions from a telecommunications network. It includes alarms related to failures in base stations, cells, synchronization, licensing, temperature issues, and communication link problems. The most common and highest severity alarms are related to failures in cells being faulty or degraded and issues with synchronization signals and timing sources.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
217 views5 pages

Kinetix 5700 Alarm Codes Overview

This document contains a list of alarm codes and descriptions from a telecommunications network. It includes alarms related to failures in base stations, cells, synchronization, licensing, temperature issues, and communication link problems. The most common and highest severity alarms are related to failures in cells being faulty or degraded and issues with synchronization signals and timing sources.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Alarm No: Alarm Description

688 System restart ordered


689 System restarted
690 WORKING STATE CHANGE ACTIVATED BY USER
805 I/O DEVICE OPERATING STATE CHANGED
1001 UNIT RESTARTED
2018 OVERFLOW IN HANDLING ALARM EVENTS
2064 ROUTE SET UNAVAILABLE
2070 LINK SET UNAVAILABLE
2072 FAILURE IN SIGNALLING LINK ACTIVATION OR RESTORATION
2241 SCCP SUBSYSTEM PROHIBITED
2246 SCCP ROUTING FAILURE
2393 FALLBACK COPYING TERMINATED IN ERROR
2394 ERROR IN FINISHING FALLBACK COPYING
2430 ERROR IN COMMAND CALENDAR
2445 UNIT TYPE HAS NO REDUNDANCY
2500 OMS CONNECTION FAILURE
2518 NO VALID FALLBACK COPY FOR DEFAULT PACKAGE
2641 FAILURE IN SYNCHRONISATION SIGNAL
2692 INCORRECT WORKING STATE
2693 ACTIVE UNIT FAULTY
2699 CRITICAL UNIT IN INCORRECT WORKING STATE
3013 SUBRACK FAN FAILURE
3159 SCTP ASSOCIATION LOST
3173 RNW PLAN ACTIVATION OR ROLLBACK FAILED
3181 STATE CHANGE OF UNDEFINED ALARM INPUT
3240 ETHERNET CONNECTIVITY LOST
3325 INCONSISTENCY IN CONFIGURATION PARAMETERS
3379 SCTP PATH FAILURE
3388 EXCEPTIONALLY HIGH TEMPERATURE IN PLUG-IN UNIT
3389 TOO LOW TEMPERATURE IN PLUG-IN UNIT
3484 CONFLICTING SCRAMBLING CODES
3485 SCRAMBLING CODE CONFLICT
3520 GATEWAY L2 ADDRESS UNREACHABLE
7651 BASE STATION OPERATION DAGRADED
7652 BASE STATION NOTIFICATION
7653 CELL FAULTY
7654 CELL OPERATION DAGRADED
7661 BASE STATION LICENCE NOTIFICATION
7750 FAILURE IN WCDMA WBTS O&M CONNECTION
7771 WCDMA CELL OUT OF USE
7775 INCONSISTENCY IN WCEL CONFIGURATION PARAMETERS
7776 HSDPA FAILURE IN WCEL
7780 HSUPA FAILURE IN WCEL
7782 HSUPA CONFIGURATION FAILED
7786 WCDMA BASE STATION OUT OF USE
9047 Alarm from network element not arriving
9108 Failure in OMC-NE communication link
61058 Synchronisation lost.
61059 ToP Timing source lost on unit 1.
61059 Synchronous Ethernet Timing source lost on unit 1, interface 2.
61059 Synchronous Ethernet Timing source lost on unit 1, interface 1.
61400 License missing for feature Timing Over Packet.
61400 License missing for feature Synchronous Ethernet.
4000-4014 RNC POWER ALARM
NE ALNO SEV
WCEL 7653 Critical
WCEL 7653 Critical
WCEL 7653 Critical
WBTS 61058 Critical
WCEL 7654 Major
WCEL 7654 Major
WCEL 7653 Major
WCEL 7653 Major
WCEL 7654 Major
WBTS 61400 Major
WBTS 61400 Major
WBTS 7651 Major
WBTS 7651 Major
WBTS 7651 Major
WBTS 7651 Major
WBTS 61059 Minor
WBTS 61059 Minor
WBTS 61059 Minor
WBTS 7652 Minor
WBTS 7652 Minor
WBTS 7652 Minor
ALARM_DESCRIPTION
Failure in optical RP3 interface
VSWR alarm
Incompatible SW version detected
Synchronisation lost.
Rx signal level failure
FPGA SW update failed
RF module failure
Antenna line device failure
System module failure
License missing for feature Timing Over Packet.
License missing for feature Synchronous Ethernet.
BTS reference clock missing
BTS master clock tuning failure
Incompatible SW version detected
System module failure
ToP Timing source lost on unit 1.
Synchronous Ethernet Timing source lost on unit 1, interface 2.
Synchronous Ethernet Timing source lost on unit 1, interface 1.
Difference between BTS master clock and reference frequency
BTS time not corrected
File corrupted in SW download

You might also like