PRODUCT DATA SHEET

MOTOTRBO™ SLR 8000 REPEATER

MOTOTRBO SLR 8000

™

BASE STATION / REPEATER

For better safety and efficiency throughout your organization, you need reliable voice
and data communications that connect everyone and everything. The MOTOTRBO
SLR 8000 repeater delivers high performance, high reliability two-way radio service,
optimised for your workplace.

The SLR 8000 is engineered for high performance, Whether you need the simplicity of a single site
reliability and flexibility and represents the next generation conventional system, the coverage of IP Site Connect,
in repeaters. or the powerful trunking capabilities of Capacity Plus,
Capacity Max or Connect Plus, the SLR 8000 delivers
Versatile and powerful, MOTOTRBO combines the best the power of digital two-way radio to your workforce. It
of two-way radio functionality with the latest digital can also operate as an analogue repeater (conventional
technology. It integrates voice and data seamlessly, or MPT 1327), or as a mixed mode analogue/digital
offers advanced features that are easy to use and repeater while you transition away from a legacy
delivers increased capacity to meet your communication analogue system.
needs from the field to the factory floor.
PRODUCT DATA SHEET
MOTOTRBO™ SLR 8000 REPEATER

GENERAL SPECIFICATIONS
VHF UHF
Frequency Range 136-174 MHz 400-470 MHz
Channel Spacing 12.5 / 20 / 25 kHz
Channel Step Size 5 Hz
Frequency Stability 0.5 ppm
Channel Capacity 64
RF Output Power 1-100 W
Dimensions (H x W x D) 89 x 483 x 438 mm (3.5 x 19 x 17.25 in)
Weight 14.1 kg (31 lbs)
Input Voltage (AC) 100-240 Vac, 47-63 Hz
Current (standby), 110 / 240 V 0.25 / 0.3 A
Current (transmitting at 100 W), 110 / 240 V 2.1 / 1.1 A (typical) 2.0 / 1.1 A (typical)
Input Voltage (DC) 12 V (11.0-15.5 V) / 24 V (21.6-32.0 V)
Current (standby), 24 V 0.5 A
Current (transmitting at 100 W), 24 V 8.6 A (typical) 8.2 A (typical)
Input Power Modes AC only, DC only, AC with Battery Revert
Operating Temperature Range -30 to +60 °C (-22 to +140 °F)
Humidity RH of 95%, Non-condensing at 50 °C (122 °F)
Max Duty Cycle 100%
Digital Vocoder Type AMBE+2™
Battery Charger Capacity (12 / 24 V) 5A
Connectivity, front panel USB B Receptacle, Microphone (RJ45), Speaker (integrated)
Connectivity, rear panel Tx (N female), Rx (BNC female), USB A Receptacle, 2x Ethernet, DB25 Accessory Connector,
External Reference (BNC Female)
External Reference 5 / 10 MHz (Auto-detect)
Supported System Types Digital Conventional, IP Site Connect, Capacity Plus, Capacity Max, Connect Plus
Analogue Conventional, Analogue Conventional Voting, MPT 1327
Audio Types Input: Balanced (600 ohms and Country-specific Impedances),
Unbalanced (1000 ohms), Microphone Accessory Port.
Output: Balanced (600 ohms and Country-specific Impedances),
Unbalanced (600 ohms), Integrated Speaker.
Audio Levels Input: Balanced: +10 to -30 dBm, Unbalanced: Adjustable, 80 mV rms nominal for 60% RSD.
Output: Balanced: +7 to -30 dBm, Unbalanced: Adjustable, 330 mV rms nominal @ 60% RSD.

FCC Emission Designators 11K0F3E, 16K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60F7W
FCC Type Acceptance ABZ99FT3095 ABZ99FT4098
IC Description 109AB-99FT3095 109AB-99FT4098

PAGE 2
PRODUCT DATA SHEET
MOTOTRBO™ SLR 8000 REPEATER

RECEIVER
VHF UHF
Frequency Range 136-174 MHz 400-470 MHz PRODUCT MEETS
Sensitivity, 12dB SINAD 0.3 uV (0.22 uV typical) • ETSI 300-086
Sensitivity, 5% BER 0.25 uV (0.18 uV typical) • ETSI 300-113
Selectivity (TIA603D), 25 / 12.5 kHz 83 / 52 dB 78 / 52 dB • TIA/EID603D
• CE Marked
Selectivity (TIA603), 25 / 12.5 kHz 83 / 75 dB 80 / 75 dB • RoHS2-Compliant
Intermodulation Rejection (TIA603D/ETSI) 85 / 73 dB (87 / 78 dB typical) • UL Listed
Spurious Rejection (TIA603D/ETSI) 85 / 75 dB (95 / 90 dB typical) • Digital Protocol
ETSI TS 102 361-1, -2,
Audio Distortion < 3% (<1.5% typical)
-3, -4 (DMR Tier II and III)
Hum and Noise, 25 / 12.5 kHz -50 / -45 dB (-56 / -52 dB typical)
Blocking > 110 dB (113 dB typical)

TRANSMITTER
VHF UHF
Frequency Range 136-174 MHz 400-470 MHz
DC (24 V) or AC 1-100 W
RF Output Power
DC (12 V) 1-50 W
Max Duty Cycle 100%
Intermodulation Attenuation 55 dB
Adjacent Channel Power (TIA603D), 25 / 12.5 kHz 75 / 60 dB
Adjacent Channel Power (ETSI), 25 / 12.5 kHz 75 / 60 dB (78 / 62 dB typical)
Conducted Spurious Emissions 40 dBm < 1 GHz, -30 dBm > 1 GHz
Audio Response TIA603D
Audio Distortion < 3% (<1% typical)
Hum and Noise, 25 / 12.5 kHz -50 / -45 dB (-55 / -52 dB typical)
Rated System Deviation, 25 /12.5 kHz ±5.0 / ±2.5 kHz

**Images show product equipped with optional modules

NOTES
Availability is subject to individual country law and regulations.
All specifications shown are typical unless otherwise stated and are subject to change without notice.
Specifications are for unit excluding options, unless otherwise stated.

PAGE 3
 PRODUCT DATA SHEET
MOTOTRBO™ SLR 8000 REPEATER

NEXT GENERATION The unit has internal monitoring circuitry, allowing you to
MOTOTRBO REPEATER measure parameters such as input voltage and current,
The SLR 8000 represents a huge leap forward in design output power, module temperatures and VSWR. This
and technology. Based on a wealth of field experience, can be accessed through the front panel maintenance
customer feedback and technological innovation, the interface, or through a remote management application
product delivers outstanding performance and reliability such as RDAC.
for your business two-way radio system. From an The standard warranty is 2 years, and can be enhanced
efficient modular design to flexible installation options, with Service from the Start: a full service support
the SLR 8000 is truly the next generation in repeaters. program that protects your hardware investment with
prioritised expert repair, proactive technical support,
HIGH PERFORMANCE software updates and more.
With its 100 W transmitter output and high sensitivity
receiver, the SLR 8000 delivers radio coverage to TOTAL FLEXIBILITY
an enormous area. With its excellent performance The SLR 8000 can be customised to suit your operation.
characteristics, it is also ideally suited for congested There are options for an internal preselector and
sites, where tighter specifications are required. antenna relay module, offering you a true one-box
The SLR 8000 supports the full MOTOTRBO feature installation. You can also opt for an internal wireline
set, and is compatible with all the MOTOTRBO system card if you need tone control capabilities, 4wire audio
architectures: single site conventional, IP Site Connect, and additional external inputs.
Capacity Plus, Capacity Max and Connect Plus. The IP Power can be supplied as 110-240 Vac, 12-24 Vdc, or AC
interface allows you to build applications and consoles with battery fallback: there is even a built-in 5 A battery
directly into your system. charger. The 2U unit can be mounted efficiently in a
To help you build your system for top performance, rack, with no requirement for ventilation space above
MOTOTRBO RF Planning and IP Integration Services are or below. And serviceability is improved by the local
available for purchase. voice capability: there is an internal speaker and volume
control, with provision for an external microphone.
HIGH RELIABILITY
The SLR 8000 offers round-the-clock reliable operation, MOTOTRBO SLR 8000
even at its continuous full transmit power of 100W. With excellent performance, high reliability and a flexible
The high-quality design has been validated through design in a slim and efficient unit, the SLR 8000 repeater
Motorola’s Accelerated Life Testing (ALT) program, is at the heart of a top-quality MOTOTRBO professional
and meets stringent quality criteria. The product has a two-way radio system.
next-generation receiver design, with high sensitivity and
improved noise blocking, so you can be confident of clear
voice quality, even in the worst conditions.

For more information on how to make your business more efficient

and better connected, visit www.motorolasolutions.com/mototrbo
Distributed by:

Motorola Solutions Ltd. Jays Close, Viables Industrial Estate, Basingstoke, Hampshire, RG22 4PD, UK.

Availability is subject to individual country law and regulations. All specifications shown are typical unless otherwise stated and are subject to change without notice.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used
under license. All other trademarks are the property of their respective owners. © 2016, 2017 Motorola Solutions, Inc. All rights reserved.
EAv2 (10/17)

PAGE 4