GDP-3224 Geophysical Receiver

Multi-Function Receiver
The GDP-3224TM is an integrated, 24-bit
multi-channel receiver for acquisition of
controlled and natural source
geoelectric and EM data.

ENHANCEMENTS
• 24-bit analog system
• Expanded keyboard
• ½-VGA graphics display
• 100BaseT Ethernet port
• GPS timing, plus high-accuracy quartz clock
• Multiple, selectable data storage modes
in a single data cache
• Remote control operation
• Broadband time-series recording
• High-speed data transfer

FEATURES
 1 to 16 channels, user expandable
 Alphanumeric keypad
 133 MHz 586 CPU  One 24-bit A/D per channel for maximum speed
 Real-time data and statistics display and phase accuracy.
 Easy to use menu-driven software  512 MB Compact Flash Card (up to 4 GB) for
 Resistivity, Time/Frequency Domain IP, CR, CSAMT, program and data storage, sufficient to hold many
Harmonic analysis CSAMT (HACSAMT), AMT, MT, days worth of data.
TEM & NanoTEM®  128 MB dRAM (up to 256 MB) for program
 Screen graphics: plots of time-domain decay, resistivity execution.
and phase, complex plane plots, etc., on a 480 x 320  Optional data storage device (up to 40 GB) for
½-VGA, sunlight readable LCD time series data recording.
 Internal humidity and temperature sensors  Anti-alias, powerline notch, and telluric filtering
 Time schedule program for remote operation with the  Automatic SP buckout, gain setting, and
XMT-32S transmitter controller calibration
 Optional GPS time synchronization with transmitter  Rugged, portable, and environmentally sealed
 Use as a data logger for analog data, borehole data, etc.  Modular design for upgrades and board
 Full compatibility with GDP-32 series receivers. replacement
 0.015625 Hz to 8 KHz frequency range standard,  Complete support: field peripherals, service
0.0001 Hz minimum for MT and 10240 Hz maximum network, software, and training
for AMT

Terraplus Inc. Tel: 905-764-5505

Fax: 905-764-8093
Email: [email protected]
Website: www.terraplus.ca
52 West Beaver Cr. Rd. #12, Richmond Hill, ON. Canada L4B 1L9
 SPECIFICATIONS FOR THE GDP-32/24 MULTI-FUNCTION RECEIVER
General
Broadband, multichannel, multifunction digital receiver NanoTEM® Analog
Frequency range: 1/64Hz - 8KHz (0.0001Hz - 8KHz for MT and Input impedance: 20 KΩ at DC
1 Hz to 10240Hz for AMT) Dynamic range: 120 db
Number of channels: Large case, 1 to 16 (user expandable) Minimum detectable signal: 4 μV
Small case, 1 to 6 (user expandable) Automatic gain ranging in binary steps from 10 to 160
Standard Survey capabilities: Analog to Digital Converter: 14 bits ± ½ LSB, 16 bits optional
Resistivity, Frequency- and Time Domain IP, Complex Conversion time: 1.2 μsec
Resistivity, CSAMT (scalar, vector, tensor), Harmonic Analysis One A/D per channel for maximum data acquisition speed
(CSAMT, Frequency-Domain EM,Transient Electromagnetics,
NanoTEM®, MMR, Magnetic IP, Magnetotellurics, Digital Section
Downhole Logging. Microprocessor: 133 MHz 586
Software language: C++ and assembly. Memory: 128 MB dRAM (up to 256 MB)
Size: Large case 43x41x23cm (17x16x9”) Mass Storage (program & data storage):
Small case 43x31x23cm (17x12x9”) 512 MB Compact Flash Card (up to 4 GB)
Weight: (including batteries and meter/connection panel): Data storage device with capacities to 40 GB optional
Small case 13.7 kg (29 lb) Serial ports: 2 RS-232C ports (16650) standard
Large case: Network Adapter: Ethernet adapter standard (100BaseT)
8 channel, 10 amp-hr batteries, 16.6 kg (36.5 lb) Mouse, CRT (VGA), and standard keyboard ports
8 channel, 20 amp-hr batteries, 20.5 kg (45 lb) Optimized Operating System
16 channel, disk, 10 amp-hr batteries, 19.1 kg (42 lb)
Enclosure: Heavy-duty, environmentally sealed aluminum
Additional Options
Power: 12V rechargeable batteries (removable pack)
Number of channels: (maximum of 3 NanoTEM® channels)
Over 10 hours nominal operation at 20oC
Large case: 1-16
(8 channels and 20 amphr batteries)
Small case: 1-6
External battery input for extended operation in cold climates,
External battery and LCD heater for –40oC operation
or for more than 8 channels
Temperature range: -40o to +45oC (-40o to +115oF)
Humidity range: 5% to 100% Other Acquisition Software
Internal temperature and humidity sensors External RPIP/TDIP/CR Control: Remote control through
Time base: Oven-controlled crystal oscillator; aging rate <5x10-10 serial port on GDP-3224 for electrical resistance tomography (ERT)
per 24 hours (GPS disciplining optional)
Streaming RPIP/TDIP:
Continuous acquisition of TDIP or RPIP data (time domain or
Displays & Controls resistivity/phase IP) using a towed electrode array
High-contrast sunlight readable ½-VGA (480x320) DFT-
technology LCD graphics display, with continuous view-angle
Borehole TEM:
adjustment (optional heater for use down to –40oC).
Remote control through GDP-3224 serial port for efficient logging of
Sealed 80-key keyboard
borehole TEM and MMR data
Analog signal meters and analog outputs
Compatible with Crone and Geonics 3-component probes
Power On-Off
Extended Broadband Time Series Data Recording:
Standard Analog Continuous recording of up to 5 standard analog channels sampling at
Input impedance: >10 MΩ at DC 32 K samples/sec (bandwidth 8 KHz with 2x oversampling) with no
Board Dynamic range: 212 db loss of data
Minimum detectable signal: 0.03 nV Developed for recording broadband magnetotelluric measurements
Maximum input voltage: ±32V
SP offset adjustment: ±2.25V in 69μV steps (automatic) Equal-Interval Mode TEM (TEME):
Automatic gain ranging in binary steps from 1/8 to 1024 Uniform sampling and storage of TEM transients as time series
Common-mode rejection at 1000 Hz: >80 db Used for LOTEM data acquisition and any application that requires
Phase accuracy: ±0.1 milliradians (0.006 degree) uniformly sampled TEM transients.
Adjacent channel isolation at 100 Hz: >90 db
Filter Section: Quadruple-notch digital telluric filter
(50/150/250/450 Hz, 50/150/60/180 Hz, 60/180/300/540 Hz,
specified by user)
Analog to Digital Converter (Standard Channel)
Resolution: 24 bits
Conversion time: 30 μ sec
One A/D per channel for maximum speed and phase accuracy

Terraplus Inc. Tel: 905-764-5505

Fax: 905-764-8093
Email: [email protected]
Website: www.terraplus.ca
52 West Beaver Cr. Rd. #12, Richmond Hill, ON. Canada L4B 1L9