Scribd
Upload
355 views2 pages

R1, R2 B1, B2: Trisector Quad-Band 2X 790-960 MHZ, 2X 1710-2170 MHZ

This document summarizes the specifications of the TNA690A12 trisector quad-band antenna, which operates in the frequency ranges of 790-960 MHz and 1710-2170 MHz. Key specifications include a diameter of 635mm, maximum gain of 17dBi, electrical tilt range of 2-10 degrees, horizontal and vertical beamwidths of 65.2 and 7.2 degrees respectively, front-to-back ratio over 25dB, sidelobe suppression of at least 17dB, maximum power handling of 300W per input, and environmental testing including temperature, humidity, vibration and shock.

Uploaded by

Francisco Domínguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
355 views2 pages

R1, R2 B1, B2: Trisector Quad-Band 2X 790-960 MHZ, 2X 1710-2170 MHZ

This document summarizes the specifications of the TNA690A12 trisector quad-band antenna, which operates in the frequency ranges of 790-960 MHz and 1710-2170 MHz. Key specifications include a diameter of 635mm, maximum gain of 17dBi, electrical tilt range of 2-10 degrees, horizontal and vertical beamwidths of 65.2 and 7.2 degrees respectively, front-to-back ratio over 25dB, sidelobe suppression of at least 17dB, maximum power handling of 300W per input, and environmental testing including temperature, humidity, vibration and shock.

Uploaded by

Francisco Domínguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TNA690A12

TRISECTOR QUAD-BAND 2x 790-960 MHz, 2x 1710-2170 MHz


 Compact Antenna
 Diameter 635 mm
 External RET available

Electrical specifications* R1, R2  B1, B2     


Frequency Range (MHz) 790—960 1710-2170

Polarization ±45º

Gain (dBi) 17 17,5

Electrical Tilt (continuously adjustable) 2—10

Horizontal Beamwidth (º), -3dB 65,2 56,9    


Vertical Beamwidth (º), -3dB 7,2 6,5    
Front to Back Ratio (dB)
>25 >25    
180º±30º total power
Cross Polar Discrimination (dB)
>19 >23
Boresight
Sidelobe suppresssion (dB)
17
First sidelobe above horizon
First null fill (dB) Typ 20

Impedance (W) 50

VSWR < 1.5:1


B1  B2 
Intraband isolation (dB) > 30

Interband isolation (dB) > 30

Intermodulation IM3 (dBc) < -150


R1  R2 
Max power per input (W) 300

External RET AISG 2.0 / 3GPP Protocol

*All specifications are subject to change without notice. Refer to TELNET for the most current information.

Mechanical specifications
Input 24 x 7/16 female connectors
Position Bottom, 3 x 8 (7/16)
Dimensions (mm), H x Ø 2700 + 300 x 635
Weight (Kg) 120

Max wind speed (Km/h) 200

Azimuth (Full antenna / Per Sector) ± 50º / ± 0º

1 of 2 www.tenet‐ri.es  V150505 
TNA690A12

Materials
Radome Fiber glass + polyester
End Caps Stainless Steel
Screws and nuts Stainless Steel

  Environmental and mechanical tests 


IEC 60068-2-1: Cold IEC 60068-2-32: Free Fall Test
IEC 60068-2-2: Dry heat IEC 60068-2-56: Damp Heat Steady State
IEC 60068-2-6: Sine Vibration IEC 60068-2-64: Random Vibration
IEC 60068-2-14: Change of Temperature IEC 60529: IP Code Test
IEC 60068-2-18: Water (Handheld shower) IEC 60695-2-1/2: Resistance to fire
IEC 60068-2-27: Shock Test UNE-EN 60598-2-3: Resistance to wind
IEC 60068-2-29: Bump Test Particular Specification: Resistance to ice
IEC 60068-2-30: Damp Heat Cyclic

Environmental RET test

Temperature –33º C a 70º C


Humidity 50º C, 98HR
Saline Fog IEC68-2-52, severity 2
IP specification IP66, IEC 60529 (Feb 2001)

2 of 2 www.tenet‐ri.es  V150505 

You might also like