4" Submersible Electric Pumps: Technical Data
4" Submersible Electric Pumps: Technical Data
TECHNICAL DATA
D
SANTANT
I S Operating range: from 0,3 to 24 m3/h.
RES
Maximum head: up to 320 metres.
Pumped liquid: clean, free of solids and abrasives, chemically neutral,
with properties similar to water.
Liquid temperature range: from 0 °C to +40 °C.
ErP
eady
Maximum permitted amount of sand: 120 g/m3.
300 gr/m3 (only for S4F)
Installation: in 4” wells or larger, tanks and cisterns, vertical position.
Starts/hour: max 20.
Cooling flow: 8 cm/s.
Special executions on requests: alternative voltages and/or frequen-
cies.
On request, the single phase version can be supplied with CONTROL
BOX BOOSTER for the increase of the starting torque.
Electric pumps complying with the 2009/125/EC Directive
(EcoDesign - ErP)
M.E.I. ≥ 0.4
APPLICATIONS
Submersible electric pumps for 4” wells or larger, capable of generating a wide range of flows and heads. These units have a very extensive range of
applications for lifting, distribution, and pressurisation in civil and industrial water systems, filling of pressure vessels and tanks, fire-fighting systems and
washing of irrigation systems.
Flanging: NEMA - 4”
Protection class: IP68
Insulation class: F
Supply voltage: single-phase 230 V / 50 Hz.
three-phase 400 V / 50 Hz.
three-phase 230 V / 50 Hz.
SUPPLY
Control box (for the single-phase version) and motor to be ordered separately.
38
S4
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
MATERIALS
N. PART* MATERIALS
117
3 BASE SUPPORT AISI 304 MICROCAST STAINLESS STEEL 49
55 SPACER TECHNOPOLYMER A
55
57 SUPPORT TECHNOPOLYMER A
– Denomination index:
(example)
S 4 C 13
Submersible pump (stainless steel
delivery and suction supports).
A-B-C-D-E-F =
Geometry of the impeller
Number of stages
39
S4 A
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 A 8 0,37 0,5 51 44,4 26,8 13,7 - - - - - - - - - - -
S4 A 18 0,55 0,75
H
114,8 99,8 60,3 30,8 - - - - - - - - - - -
(m)
S4 A 25 0,75 1 159,4 138,7 83,7 42,7 - - - - - - - - - - -
4GG M 0,37 0,5 1x230 V ~ 3,3 97 658 110 110 770 0,009 12,5
S4 A 12
4OL M 0,37 0,5 1x230 V ~ 3,5 97 707 110 110 770 0,009 12,1
4GG M 0,55 0,75 1x230 V ~ 4,6 97 808 110 110 910 0,011 14,5
S4 A 18
4OL M 0,55 0,75 1x230 V ~ 4,5 97 847 110 110 910 0,011 13,8
4GG T 0,55 0,75 3x400 V ~ 1,9 97 778 110 110 910 0,011 13,2
S4 A 18
4OL T 0,55 0,75 3x400 V ~ 2,2 97 827 110 110 910 0,011 12,8
4GG M 0,75 1 1x230 V ~ 6,2 97 968 110 110 1080 0,013 19,8
S4 A 25
4OL M 0,75 1 1x230 V ~ 6,3 97 1017 110 110 1080 0,013 19,4
4GG M 1,1 1,5 1x230 V ~ 8,6 97 1265,5 120 120 1590 0,023 25
S4 A 36
4OL M 1,1 1,5 1x230 V ~ 8,5 97 1289,5 120 120 1590 0,023 18,5
4GG T 1,1 1,5 3x400 V ~ 3,4 97 1220,5 120 120 1590 0,023 22,6
S4 A 36
4OL T 1,1 1,5 3x400 V ~ 3,6 97 1269,5 120 120 1590 0,023 21,3
4GG T 1,5 2 3x400 V ~ 4,4 97 1562,5 120 120 1920 0,028 26,8
S4 A 50
4OL T 1,5 2 3x400 V ~ 4,6 97 1569,5 120 120 1920 0,028 25,5
4GG motor: 4” encapsulated in water bath.
4OL motor: 4” rewindable in oil bath.
40
S4 A
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 1” 1/4 GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
41
S4 B
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 B 5 0,37 0,5 31 30 26 22,6 19 10 - - - - - - - - -
S4 B 16 0,75 1
H
99,2 95,7 83 72,5 61 32 - - - - - - - - -
(m)
S4 B 24 1,1 1,5 148,8 143,5 124,6 108,7 91,7 48 - - - - - - - - -
4GG M 0,37 0,5 1x230 V ~ 3,3 97 598 110 110 770 0,009 12,1
S4 B 8
4OL M 0,37 0,5 1x230 V ~ 3,5 97 647 110 110 770 0,009 11,7
4GG M 0,55 0,75 1x230 V ~ 4,6 97 718 110 110 770 0,009 14
S4 B 12
4OL M 0,55 0,75 1x230 V ~ 4,5 97 757 110 110 770 0,009 13,3
4GG T 0,55 0,75 3x400 V ~ 1,9 97 688 110 110 770 0,009 12,5
S4 B 12
4OL T 0,55 0,75 3x400 V ~ 2,2 97 737 110 110 770 0,009 12,1
4GG M 0,75 1 1x230 V ~ 6,2 97 828 110 110 1080 0,013 15,9
S4 B 16
4OL M 0,75 1 1x230 V ~ 6,3 97 877 110 110 1080 0,013 15,5
4GG T 0,75 1 3x400 V ~ 2,4 97 808 110 110 910 0,011 14,2
S4 B 16
4OL T 0,75 1 3x400 V ~ 2,6 97 847 110 110 910 0,011 13,5
4GG M 1,1 1,5 1x230 V ~ 8,6 97 1053 120 120 1240 0,018 22,6
S4 B 24
4OL M 1,1 1,5 1x230 V ~ 8,5 97 1077 120 120 1240 0,018 21,3
4GG T 1,1 1,5 3x400 V ~ 3,4 97 1008 120 120 1240 0,018 16,7
S4 B 24
4OL T 1,1 1,5 3x400 V ~ 3,6 97 1057 120 120 1240 0,018 15,4
4GG T 1,5 2 3x400 V ~ 4,4 97 1250 120 120 1330 0,019 23,5
S4 B 32
4OL T 1,5 2 3x400 V ~ 4,6 97 1257 120 120 1330 0,019 22,2
4GG T 2,2 3 3x400 V ~ 5,9 97 1507,5 120 120 1590 0,023 25,3
S4 B 40
4OL T 2,2 3 3x400 V ~ 6 97 1514,5 120 120 1590 0,023 25,5
4GG T 2,2 3 3x400 V ~ 5,9 97 1686,5 120 120 1920 0,028 27,5
S4 B 48
4OL T 2,2 3 3x400 V ~ 6 97 1693,5 120 120 1920 0,028 27,7
42
S4 B
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 1” 1/4 GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
43
S4 C
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 C 6 0,37 0,5 33 - 31,8 30,7 29,4 26,4 22,7 13,2 - - - - - - -
4GG M 0,55 0,75 1x230 V ~ 4,6 97 740,5 110 110 910 0,011 14,2
S4 C 9
4OL M 0,37 0,5 1x230 V ~ 3,5 97 779,5 110 110 910 0,011 13,5
4GG T 0,55 0,75 3x400 V ~ 1,9 97 710,5 110 110 910 0,011 12,5
S4 C 9
4OL T 0,55 0,75 3x400 V ~ 2,2 97 759,5 110 110 910 0,011 12,1
4GG M 0,75 1 1x230 V ~ 6,2 97 890,5 110 110 1080 0,013 16,2
S4 C 13
4OL M 0,75 1 1x230 V ~ 6,3 97 939,5 110 110 1080 0,013 15,8
4GG T 0,75 1 3x400 V ~ 2,4 97 870,5 110 110 1080 0,013 14,5
S4 C 13
4OL T 0,75 1 3x400 V ~ 2,6 97 909,5 110 110 1080 0,013 13,8
4GG M 1,1 1,5 1x230 V ~ 8,6 97 1130,5 120 120 1240 0,018 18,6
S4 C 19
4OL M 1,1 1,5 1x230 V ~ 8,5 97 1154,5 120 120 1240 0,018 17,3
4GG T 1,1 1,5 3x400 V ~ 3,4 97 1085,5 120 120 1240 0,018 17,1
S4 C 19
4OL T 1,1 1,5 3x400 V ~ 3,6 97 1134,5 120 120 1240 0,018 15,8
4GG T 1,5 2 3x400 V ~ 4,4 97 1342,5 120 120 1590 0,023 23,2
S4 C 25
4OL T 1,5 2 3x400 V ~ 4,6 97 1349,5 120 120 1590 0,023 21,9
4GG T 2,2 3 3x400 V ~ 5,9 97 1647,5 120 120 1920 0,028 29,5
S4 C 32
4OL T 2,2 3 3x400 V ~ 6 97 1654,5 120 120 1920 0,028 29,7
4GG T 2,2 3 3x400 V ~ 5,9 97 1875 120 120 2200 0,032 33,5
S4 C 39
4OL T 2,2 3 3x400 V ~ 6 97 1882 120 120 2200 0,032 33,7
44
S4 C
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 1” 1/4 GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
45
S4 D
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 D 4 0,37 0,5 24 - - - 23 22 21,8 18 16,2 11,2 - - - - -
S4 D 6 0,55 0,75 36 - - - 34,5 33 31,5 27 24,3 16,8 - - - - -
S4 D 8 0,75 1 48 - - - 46 44 42 36 32,5 22,4 - - - - -
S4 D 13 1,1 1,5 78 - - - 74,7 71,5 68,3 59 52,6 36,4 - - - - -
S4 D 17 1,5 2 102 - - - 98 93,5 89,5 77,5 68,8 47,6 - - - - -
H
S4 D 21 2,2 3
(m)
126 - - - 121 115,5 110 96 85 58,8 - - - - -
S4 D 25 2,2 3 150 - - - 144 137,5 132 114,5 101,2 70 - - - - -
S4 D 29 3 4 174 - - - 166 159,5 152 132 117,4 81,2 - - - - -
S4 D 34 3 4 204 - - - 196 187 179,5 155 137,7 95,2 - - - - -
S4 D 38 4 5,5 228 - - - 219 209 200 173 153,9 106,4 - - - - -
S4 D 45 4 5,5 270 - - - 259 247,5 237 205 182,2 127 - - - - -
46
S4 D
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 1” 1/4 GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
47
S4 E
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 E 6 0,75 1 40,5 - - - - - - 31,5 30 27 17,6 7,7 - - -
4GG T 0,75 1 3x400 V ~ 2,4 97 768,5 110 110 910 0,011 13,9
S4 E 6
4OL T 0,75 1 3x400 V ~ 2,6 97 807,5 110 110 910 0,011 13,2
4GG M 1,1 1,5 1x230 V ~ 8,6 97 938,5 110 110 1080 0,013 17,1
S4 E 8
4OL M 1,1 1,5 1x230 V ~ 8,5 97 962,5 110 110 1080 0,013 15,8
4GG T 1,1 1,5 3x400 V ~ 3,4 97 893,5 110 110 1080 0,013 15,5
S4 E 8
4OL T 1,1 1,5 3x400 V ~ 3,6 97 942,5 110 110 1080 0,013 14,2
4GG T 1,5 2 3x400 V ~ 4,4 97 1165,5 120 120 1330 0,019 18,5
S4 E 12
4OL T 1,5 2 3x400 V ~ 4,6 97 1172,5 120 120 1330 0,019 17,2
4GG T 2,2 3 3x400 V ~ 5,9 97 1505,5 120 120 1590 0,023 20,9
S4 E 17
4OL T 2,2 3 3x400 V ~ 6 97 1512,5 120 120 1590 0,023 21,1
48
S4 E
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 2” GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
49
S4 F
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
PERFORMANCE AT 50 Hz
ELECTRICAL DATA HYDRAULIC DATA
MODEL P2 NOMINAL Q=m3/h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4,8 6 9 11,4 18 24 27
kW HP Q=l/min 0 10 20 25 30 40 50 70 80 100 150 190 300 400 450
S4 F 7 2,2 3 40,5 - - - - - - - - - 36 33 24 15 11
S4 F 10 3 4 H 58 - - - - - - - - - 50,8 47 34 22 16
50
S4 F
4” SUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE PUMPS
DNM: 2” GAS
H
Performance at 50 Hz 2 poles. The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
51