Scribd
Upload
16 views2 pages

Create and Solid Editing

This document provides instructions for common solid modeling tasks in CAD software: 1. Converting surfaces to a solid by selecting all surfaces and using the "Bounding Surfaces" command. 2. Identifying a solid model by checking for dark green edges on the model. 3. Creating a cylindrical hole by selecting base and vector nodes, and specifying radius and height using the "Cylinder Full Boolean" operation. 4. Performing Boolean operations using the "Boolean" command and selecting the operation type.

Uploaded by

Jayesh Chopade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
16 views2 pages

Create and Solid Editing

This document provides instructions for common solid modeling tasks in CAD software: 1. Converting surfaces to a solid by selecting all surfaces and using the "Bounding Surfaces" command. 2. Identifying a solid model by checking for dark green edges on the model. 3. Creating a cylindrical hole by selecting base and vector nodes, and specifying radius and height using the "Cylinder Full Boolean" operation. 4. Performing Boolean operations using the "Boolean" command and selecting the operation type.

Uploaded by

Jayesh Chopade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Sr Task Command Steps

NO
Create and Solid Editing
1 How to convert the Bounding Surfaces Solid-Bounding Surfaces>Select all surfs
surface in to solid?

2 How to recognize By checking the Dark green By checking the Dark green Edges on the
the solid model? Edges on the model model
3 How to create the Solid Edit> Cylinder Full Select the base base node and vector node
cylindrical hole in Boolean operation. and specify the base radius and height of
model? the cylinder.
4 How to do Boolean Solid Edit>Boolean>type of Solid Edit>Boolean>type of
operation? operation>operation operation>operation
5 How to split the Solid Edit>trim with Solid Edit>trim with line>Bounding line,
solid model? line>Bounding line, Cutting Cutting line
line
6 How to merge the Solid Edit>merge>select the Solid Edit>merge>select the solids to be
split the solid solids to be merge merge
model?
Tetra Meshing(Volume tetra mesh and standard tetra mesh)
1 Import the
housing.hm
2 Check the surface or By picking one surface Check for the free edges and suppress
solid model whether it and hide the same. edges.
is enclosed or not
3 Volume tetra mesh 3D>tetra mesh>volume Enclosed volume>surfs
tetra> 2D type tria and 3D type’s tetras. >Mesh.

For curvature fillets select 2D type R trias.


Use Curvature and use proximity (Range of
min and max element for curvature and
whole model.)

You might also like