Scribd
Upload
2K views1 page

Ge KV2C Forms

The document discusses different types of ANSI standard meter forms including their wires, circuits, elements, and classes. It also describes Fitzall operation which allows metering different service types with basic meter types by using conversion software and appropriate sockets.

Uploaded by

bong destura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Ge KV2C Forms

The document discusses different types of ANSI standard meter forms including their wires, circuits, elements, and classes. It also describes Fitzall operation which allows metering different service types with basic meter types by using conversion software and appropriate sockets.

Uploaded by

bong destura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GEH-7285, kV2c Encompass Electronic Meter

1.1.2 Meter Forms


The ANSI Standard S Base (socketed) and A Base (bottom connected) Meter Forms are
shown in Table 1-1.
Table 1-1. ANSI Standard Meter Forms

Form Wires Circuit Elements SC/TR Class


1S 2 1Ø 1 SC 200, or 320
2S 3 1Ø 1 SC 200, or 320
3S 2 1Ø 1 TR 20
4S 3 1Ø 1 TR 20
9S, 10A, 4 3Ø Y or ∆ 3 TR 20
48A
12S 3 Network or 3Ø∆ 2 SC 200, or 320
13A 3 Network or 3Ø∆ 2 SC 150
16S 4 3Ø Y or ∆ 3 SC 200, or 320
16A 4 3Ø Y or ∆ 3 SC 150
1,3
36S 4 3Ø Y 2½ TR 20
1,3,4
36A
2,3
45S 3,4,5 1Ø, 2Ø, Network, 2 TR 20
5
56S 3Ø Y or ∆
2, 3
45A
9S 4 3Ø 200, or 320

Form Wires Circuit Elements SC/TR Class

10A (No 4 3Ø TR 20
KYZ)
45A (No 3 3Ø TR 20
KYZ)
2S 1Ø SC 200
16S 3Ø SC 200
16SB 4 3Ø SC 20
12SB 3 3Ø 20
3CS 2 1Ø 1 TR 20

Notes:
3
. These forms are the traditional 2 ½-and 2-element solution for metering 4-wire
circuits in the United States. However, 2 ½- and 2-element meters in 4-wire circuits do
not produce a Blondel solution. Without a Blondel solution, systematic errors may
occur when a voltage imbalance exists.

1.1.2.1 Fitzall™ Operation


The GE Fitzall™ feature, combined with wide voltage range operation, allows users to meter
a wide variety of service types with only 2 basic meter types. A basic form 9S (or 10A, 48A)
meter is used for transformer rated applications and form 16S (or 16A) is used for self
contained applications. By using the MeterMate™ software to convert the meter for a
different service type and providing an appropriately wired socket, any service can be
metered. See Fitzall™ instruction book GEI-52590 for details.

1-4 • Product Description

You might also like