Scribd
Upload
1K views2 pages

Technical Data D2842LE301 1999 07 13

This document provides technical specifications for a four-stroke, 12 cylinder V-form diesel engine called the D 2842 LE301. Some key details include: - It has a turbocharger and intercooler for aspiration. Cooling is via a water circulation pump and it uses a force-feed lubrication system. - The engine operates at 1500 or 1800 RPM and produces 585 or 682 kW of power respectively. It has a compression ratio of 15.5:1. - Additional specs cover displacement, cylinder dimensions, fuel consumption rates, cooling requirements, noise levels, and more exhaustive technical details. - Nominal ratings are based on ISO standard reference conditions for air temperature, pressure

Uploaded by

scrollock0428
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Technical Data D2842LE301 1999 07 13

This document provides technical specifications for a four-stroke, 12 cylinder V-form diesel engine called the D 2842 LE301. Some key details include: - It has a turbocharger and intercooler for aspiration. Cooling is via a water circulation pump and it uses a force-feed lubrication system. - The engine operates at 1500 or 1800 RPM and produces 585 or 682 kW of power respectively. It has a compression ratio of 15.5:1. - Additional specs cover displacement, cylinder dimensions, fuel consumption rates, cooling requirements, noise levels, and more exhaustive technical details. - Nominal ratings are based on ISO standard reference conditions for air temperature, pressure

Uploaded by

scrollock0428
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Part A

Diesel engine D 2842 LE301


Page 1
Technical data 13.07.99

Engine type : four-stroke, direct-injection


Cylinders : 12 cylinder V-form, wet replaceable cylinder liners
Aspiration : turbocharger, intercooler
Cooling : water circulation by centrifugal pump on engine
Lubrication : force-feed lubrication by gear pump, lubricating oil cooler
in cooling water circuit of engine
Injection : Bosch in-line pump with integrated, electromagnetic actuator

Generator : Bosch three-phase generator with rectifier and transistorized


governor, 28 V, 55 A
Starter motor : Bosch solenoid-operated starter, typ KB, 24 V, 6,6 kW

Bore : 128 mm Starter battery capacity : 180 Ah (24V)


Stroke : 142 mm Filling capacities :
-Engine lube oil for
Volume : 21,927 l standard oil sump (min.) : 24 l
standard oil sump (max.) : 32 l
Compression ratio : 15,5:1
Cooling water temperature: Inertia moments (SI-Unit ) :
- under normal conditions 90°C - engine and vibration damper : 1,365 kgm²
- short period under extreme - flywheel for :
conditions 95 generator drive 1500 rpm: 2,412 kgm²
- before start of full or generator drive 1500 rpm: 4,120 kgm²
load (min.) 40°C generator drive 1800 rpm: 2,412 kgm²

Filling capacities:
- coolant for engine with
integrated cooling system
and piping approx 96 l
Steady-state speed accuracy (speed droop)
- electronical governor 0 - 8% adjustable

LE301E1_.xls
Dieselengine D2842 LE301 Part A
Technical data Page 2
14.07.99

LE301 LE301
speed rpm 1500 1800
ISO net brake fuel stop rating kW 585 682
Mean effective pressure bar 21,3 20,8
Torque Nm 3726 3618
ISO standard rating kW 532 620
Exhaust status IMO IMO
Mean effective pressure bar 19,4 18,9
Torque Nm 3387 3289
Mean piston velocity m/s 7,1 8,52
Fuel consumption
100% load g/kWh 215 225
75% load g/kWh 206 217
50% load g/kWh 207 216
Lube oil consumpt. max. g/h 572 697
Air for combustion m³/h 2440 2850
Exhaust gas heat KW 275 360
Exhaust gas temp °C 370 400
Exhaust gas mass flow kg/h 2850 3310
Exhaust gas vol. flow m³/h 5050 6160
Exhaust gas back pressure
max. permissiple hPa
Jacket water heat incl.
water-cooled exhaust manifold kW 425 500
Minimum cooling water circulation l/h 33000 39600
Chargeair before Intercooler °C 160 180
Chargeair after Intercooler °C 45 50
Intercooler heat rate kW 100 140
Power input for
seawater pump kW 3 3
Delivery quantity of seawater
pump at a back pressure of 0,6 bars
and 0 bars inlet pressure l/h 29000 34800
Radiation heat kW 50 53

Noise at 1m distance dB(A) 102 103

Dry weight of engine ... kg 1770 1770

The nominal ratings are based on reference conditions according to 318 K ( 45° Celsius ) air temperature,
100 kPa ( 1000 mbar ) air pressure, 60 % air humidity;
Technical data are subject to alterations.

LE301_3_NOx.xls

You might also like