Introduction to solid modeling using Onshape

• Onshape is a CAD/solid modeling application.

• It provides powerful parametric and direct modeling capabilities.
• It is cloud based therefore you do not need to install any software.
• Documents are shareable.
• Multiple users can work in the same document at the same time (simultaneous
editing).
• It runs in any device with a working web browser.
• It is freely available for Educational use.
• To start using Onshape register at: https://cad.onshape.com/

1
 Introduction to solid modeling using Onshape
• Even if you have not used a CAD software before, you will find the GUI easy to use.
• You will notice that there is no save button because everything you do is
automatically saved.
Help
Versioning, branching, and history menu Toolbar

Undo/Redo View cube

Eyeball - Hide/unhide
features
Feature list

Parts list
Enter to sketch mode

3D area
Document tabs 2
 Introduction to solid modeling using Onshape
• Mouse interaction in the 3D area (it can be configure in the preference area).

Mouse interaction in the

3D viewer

Selection

Rotate

Pan

Zoom

• To deselect click in an empty region in the 3D area or press space-bar.

3
 Introduction to solid modeling using Onshape
• When dealing with parts, assemblies and drawing in Onshape, you will find the
following toolbars:

Feature toolbar:

Sketch toolbar:

Assemblies toolbar:

Drawings toolbar:

• Each icon in the toolbar corresponds to a different feature.

• If you mouse over the toolbar icons you will get a pop-up window with the instructions
of how to use the feature.
• If you need more information about each feature, use the help. 4
 Introduction to solid modeling using Onshape
• Parametric modeling and feature based modeling are crucial components in the
design experience.
• Onshape is parametric and feature based, with a relative fast learning curve.
• Sketches are the core of good 3D designs and parametrization.
• And dimensions and constrains are the glue that keep sketches together.

5
 Introduction to solid modeling using Onshape
• A simple sketch, can be used to do many things using the parametric modeling and
feature based modeling options available in Onshape.

Starting sketch Final solid model

6
 Introduction to solid modeling using Onshape
• A simple sketch, can be used to do many things using the parametric modeling and
feature based modeling options available in Onshape.

Extrude Extrude

Chamfer

Fillet

7
 Introduction to solid modeling using Onshape
• A simple sketch, can be used to do many things using the parametric modeling and
feature based modeling options available in Onshape.
Extrude

New sketch in a face

New plane
Sweep

New sketch in a plane 8

 Introduction to solid modeling using Onshape
• And finally, some keyboard shortcuts that may turn out useful for your work:

9
 Introduction to solid modeling using Onshape

• This is all we need to know about part modeling in

Onshape.
• Let us work with a few simple geometries to
understand how Onshape works.
• We also will show you a few clicks and picks you
should be aware of.
• Remember, study and practice is the best way to build
modeling skills.

10
 Introduction to solid modeling using Onshape
• Let us create this solid model using the dimensions illustrated.

Note: all the dimensions are in meters

11
 Introduction to solid modeling using Onshape
• Remember, there is no wrong or right way to make a model, but there are
sometimes better ways.
• The fact that there are many ways to accomplish a task when creating a
model, gives you the freedom to work in a way that is comfortable to you.
Hereafter we are going to show you our way.
• If you have an idea how your design may need to change in the design
process, then you should make it in a way to make those changes more
efficient.
• Think about a strategy to use to create your design or design intent.
• Choose one feature over other.
• Dimensioning strategy.
• Order of the operations.
• Parametrization.
• Single or multiple parts.
• Top-bottom or bottom-up modeling technique.
12
 Introduction to solid modeling using Onshape
• Enter the document page and create a new design

Create new document

13
 Introduction to solid modeling using Onshape
• In the part studio page, select the top plane and start a new sketch.
• If you mouse over the toolbar icons you will get a pop-up window with the instructions
of how to use the feature.

Start a new sketch

Select this plane

Part studio page

14
 Introduction to solid modeling using Onshape
• In the part studio page, select the top plane and start a new sketch.

We are working in this sketch

Right click on the 3D area and select

view normal to sketch plane

15
 Introduction to solid modeling using Onshape
• Using the sketching features, draw the following line.
When you are done sketching
press the checkmark To add dimensions

In sketch mode: Use the dimensions illustrated to

• Blue geometry is free to move. draw this line
• Black geometry is fully defined.
• Red geometry is over-constrained.
16
 Introduction to solid modeling using Onshape
• Select the right plane and start a new sketch.
• Draw a circle with the center in the origin (the white point).
When you are done sketching
press the checkmark

Select this plane

We are working in this sketch

Origin

Use the dimensions illustrated to

draw the circle

17
 Introduction to solid modeling using Onshape
• Use the sweep feature to create a new solid.

Select the circle as the Select new solid Select the lines as the
face to sweep sweep patch

Sweep feature

18
 Introduction to solid modeling using Onshape
• At this point, you should have this solid.

Solid name.
Right click to rename
or view the properties

19
 Introduction to solid modeling using Onshape
• Let us add the new inlet to the pipe.
• Create a new sketch in the top plane or edit the initial sketch (hereafter we will edit
the initial sketch).

Right click and choose

the option edit

Sketch these lines using the

dimensions illustrated. Pay attention
to the angle and the offset distance.
20
 Introduction to solid modeling using Onshape
• Create a plane normal to a line and passing through a point

Create new plane

Select point normal,

and select the line and
point as illustrated

To get better visibility, you

can hide the solid or adjust Use this line to create
the transparency the new plane

Use this point to create

the new plane

21
 Introduction to solid modeling using Onshape
• Sketch a circle in the newly created plane.

New plane

To get better visibility, you

can hide the solid or adjust
the transparency

Sketch this circle in the newly created plane

22
 Introduction to solid modeling using Onshape
• Use the feature extrude to create a new solid using the previous sketch.
• Extrude the circle until it intercepts the solid.
Add the new solid to the previous part
Feature extrusion

Use this sketch as the

base for the extrusion
Extrusion.
You can manually move
the extrusion using the
triad manipulator, or
input a value

Instead of the extrusion feature, you could use

the sweep feature. You will need to create a
longer sweep path.
23
 Introduction to solid modeling using Onshape
• At this point you should have the following solid.

24
 Introduction to solid modeling using Onshape
• If you want to know the mass properties of the solid, select it, and then click on the
mass properties icon.
• To get the inertia, you will need to assign a material.
Mass properties window

Select the part.

Right click and select
assign material.

Mass properties icon

25
 Introduction to solid modeling using Onshape
• To export the design, right click on the part name and select the option export.
• Choose the desired format. In this case choose STL.

Right click and select the

option export.

26
 Introduction to solid modeling using Onshape
• Let us create another solid model using the dimensions illustrated.

Note: all the dimensions are in meters

27
 Introduction to solid modeling using Onshape
• We have mentioned that there are many ways to accomplish a task when
creating a model.
• Hereafter we are going to generate the same solid model using three
different approaches.
• And depending of our final goal, one approach may be better than the other
one.
• This is design intent in action.
• We are going to try the following approaches:
• One single sketch to generate the solid of revolution.
• The layer approach to generate the main body.
• The machinist approach. Here we start from a uniform solid and
then we remove material.
• As we are already familiar with the interface and the design process, we are
not going to explain all the steps.

28
 Introduction to solid modeling using Onshape
• Let us draw one single sketch to generate the solid of revolution.
• Using the dimensions illustrated, create this sketch in the front plane.
• Pay attention to the constrains.

Select this plane to

draw the sketch

Origin

29
 Introduction to solid modeling using Onshape
• Now using the previous sketch, generate a solid of revolution using the feature
revolve.
Revolve feature

Sketch 1
Use this edge as
revolve axis

Select Sketch 1 as region to

revolve
30
 Introduction to solid modeling using Onshape
• At this point, you should have this solid.
• Notice that we changed the transparency.

Right click on Part 1 and

select Edit appearance
to change transparency and
other properties

31
 Introduction to solid modeling using Onshape
• Let us create the two extrusions, one at a time.
• Select the front plane and draw the following sketch using the dimensions illustrated.

Select the front plane

to draw the sketch

Use sketch 1 as reference

to set the dimensions

32
 Introduction to solid modeling using Onshape
• Extrude the newly created sketch to obtain the following solid

Select Add to fuse the new solid with the previous one

Select this sketch as

region to extrude

Merge with this part

Extrude a distance of
3 meters
33
 Introduction to solid modeling using Onshape
• Do the same for the other extrusion. Remember to reverse the extrusion direction.
• At this point you should have the following solid model.

In this sample, we created the

two extrusions using two
different sketches, maybe it
would have been better to mirror
one sketch instead.

34
 Introduction to solid modeling using Onshape
• Let us create the same solid but using layers instead.
• Create a new plane using the option point normal or offset.
Create new plane

New plane

If you use the offset option to

generate the new plane, you
will need to select the top
plane and then offset it a
distance of 4 meters
Origin

Construction axis sketched in the front plane (4 meters)

35
 Introduction to solid modeling using Onshape
• Using the dimensions illustrated, create a circle in the new plane.

New plane

Sketch this circle

36
 Introduction to solid modeling using Onshape
• Now extrude the circle to create the first layer.

Generate the extrusion up to a reference

vertex or a distance of 2 meters
37
 Introduction to solid modeling using Onshape
• Now generate a new plane located one meter from the origin, as in the figure.
• Using the dimensions illustrated, draw a circle in the new plane.

New plane, you can create

it using the option Point
normal or offset.

Origin

Sketch a circle with a diameter of 1 meter

38
 Introduction to solid modeling using Onshape
• Let us create the second layer using a loft.
• The loft feature will create a solid between two (or more) profiles.
Loft Select Add to fuse the new solid with the previous one

Select this face

to create the loft

Select this sketch to

create the loft

Selected faces
The faces need to be selected in order

39
 Introduction to solid modeling using Onshape
• Let us create the final layer by extruding a face.

Select Add to fuse the new solid with the previous one

Select this face to create

the extrusion

Origin
Create the extrusion up to the
origin or a distance of 1 meter

40
 Introduction to solid modeling using Onshape
• Now that we have the main body, let us create the final two extrusions.
• Sketch the two circles as illustrated, notice that we are mirroring the right circle.
Use this feature to extract the reference line Mirror feature

Construction line
Convert to a used to set the
construction line dimensions

When extruding the two Circle

circles, remember to use
the option add material to
fuse the bodies. Extrude
the circles a distance of 3 Construction axis to be used
meters. as a mirror axis
Mirrored circle

41
 Introduction to solid modeling using Onshape
• At this point, you should have the following solid model.
• As you can see, is exactly the same result but we used more operations.

42
 Introduction to solid modeling using Onshape
• Let use the machinist approach. This approach is useful is you are thinking on how
you will manufacture this part.
• By starting from a uniform solid we start to remove material.

Reference vertex
Extrude the circle a
distance of 4 meters, or up
to a reference vertex. You Initial solid
can also sweep the circle
along the construction line

Sketch this construction line in

Sketch a circle with a diameter the front plane (sketch 1 in the
of 4 meters in the bottom plane Features list)
(sketch 2 in the features list)
43
 Introduction to solid modeling using Onshape
• Let us draw the following sketches in the front plane.
• To set the dimensions, you will need to create reference lines/points.
Circle

We will use this face to remove

material from the main cylinder body
Mirrored circle
44
 Introduction to solid modeling using Onshape
• Let us remove some material from the main cylinder part.
• We will use the revolve feature with the remove option.
Use the option remove in order to remove the material Revolve axis

Face to revolve.
Notice that this face belongs to sketch 3
45
 Introduction to solid modeling using Onshape
• Finally, let us create the two extrusions.
• Remember to use the option add material two fuse the bodies.

Select this face and extrude

a distance of 3 meters
Select this face and extrude
a distance of 3 meters
46
 Introduction to solid modeling using Onshape
• At this point, you should have the following solid model.
• Again, we obtained the same result.

• If you are working with CNC lathes or additive manufacturing, this approach can be
used to select the best way to remove (or add) material. 47
 Introduction to solid modeling using Onshape
• We have just seen design intend in action.
• Design intent is just a strategy where your design is defined in such a way that
changes produce desired, predictable results.
• As you can see, we can arrive to the same results in many ways. But it is better to
work in such a way to get the results more efficient.

Approach 1

Approach 2

Approach 3

48
 Introduction to solid modeling using Onshape
• Parametric modeling and feature-based modeling are two of the most powerful tools
available in any CAD/solid modeling application.
• They are crucial components in the design experience, especially when dealing with
design intent.
• Experimenting with dimension schemes is one of the best ways to improve your
understanding of design intent.
• Design intent is incredibly powerful in a parametric CAD environment. But in case you
are worried about fully understanding how design intent impacts your current models,
we assure you that it comes naturally as you create designs.
• Just be sure to give some thoughts about an approach and strategy for creating your
models, as well as the dimension schemes and relationships that will be applied.
• Once you have done that, your modeling skills will take off and you will find new
confidence in how well you can model.
• Finally, feel free to visit our youtube channel where you will find a few solid modeling
videos:
https://www.youtube.com/channel/UCNNBm3KxVS1rGeCVUU1p61g

49