Scribd
Upload
1K views1 page

JSA Confined Sapce Entry

This job safety analysis sheet outlines the potential hazards and required precautions for confined space entry. It identifies hazards such as lack of communication, non-compliance with safety procedures, pressurized fluids, flammable or toxic atmospheres, and lack of oxygen. The precautions include planning the work, isolating and draining equipment, testing for atmospheres, using permits, gas monitoring, ventilation, and emergency retrieval equipment. The JSA was completed by Mr. Prasong Singthom and aims to ensure the safety of personnel entering confined spaces.

Uploaded by

prasong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

JSA Confined Sapce Entry

This job safety analysis sheet outlines the potential hazards and required precautions for confined space entry. It identifies hazards such as lack of communication, non-compliance with safety procedures, pressurized fluids, flammable or toxic atmospheres, and lack of oxygen. The precautions include planning the work, isolating and draining equipment, testing for atmospheres, using permits, gas monitoring, ventilation, and emergency retrieval equipment. The JSA was completed by Mr. Prasong Singthom and aims to ensure the safety of personnel entering confined spaces.

Uploaded by

prasong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

P & S Technical Consultant and Serviced Co.,Ltd.

Job Safety Analysis Sheet


JOB DESCRIPTION: Confined Space Entry JSA Ref. No. JSA / P&S / 04
Facility: Work Area / Equipment: Permit No.
Date:
PERSONAL PROTECTIVE EQUIPMENT: Hard Hat, Safety Shoes, Hand Gloves, Safety Harness, BA Set / Airline Unit,
Chemical Suit, Gum Boot, Safety Goggles, Multi – gas Detector, Lifeline and Full Body Harness.
SEQUENCE
Yes /
OF BASIC JOB POTENTIAL HAZARDS PRECAUTIONS
No
STEPS
• Plan the work involving personnel responsible for
Lack of Communication preparation (isolation, depressurization, draining, venting,
flushing, purging, gas testing etc) of confined space.

Non-compliance of Safety
• Refer AMATA BEGRIMM ‘Entry into Confined Space’
Procedures
• Ensure the Confined Space is positively isolated from all
Energized Equipment sources of energy (hydraulic, pneumatic, electrical etc.)
• Use multilock & tag for isolation carried out.
Pre – Entry • Ensure the confined is depressurized & content is drained
Pressurized Fluid
safely.
Pyrophoric Deposition • Ensure the pyrophoric deposition (sludge) is water wetted.
Flammable & / or Toxic • Ensure the confined space is flushed, purged and
Atmosphere thoroughly ventilated as required.
• Ensure the confined space is free from any flammable /
Lack of Oxygen toxic atmosphere and has sufficient oxygen for normal
breathing.
• Obtain the entry permit & other associated permits for
Unauthorized Entry
types of work to be carried out.
• Place a Standby Person at manhole to maintain contact
No Contact with the Entrant
with the entrant and record entry / exit.

Dark / Insufficient Illumination • Ensure safe illumination suitable to hazardous area


classification.
• Ensure the work to be carried out inside the Confined
Fire & Explosion Space fulfill the Permit to Work requirement for the type of
Entry work.
• Ensure sufficient ventilation and air circulation inside
Heat & Humid confined space.
• Provide periodic break / rest to the entrant.
Welding Fumes / Toxic • Ensure continued gas monitoring.
Hazard • Ensure cross ventilation to dispose toxic vapor.
Entrapment or Collapse of • Ensure availability of full body harness & lifeline etc for
Entrant emergency retrieval of personnel from Confined Space.
Left Unattended for Re-Entry • Barricade the Confined Space and post warning notice.
Re-entry /
Completion • Ensure there is no tool, equipment, rags or other material
Foreign Materials Left inside
left inside

Additional
Hazards
(Other than
indicated above)

Name: Mr. Prasong Singthom Designation:


P&S / ID. No. 001 Company:
JSA Done By
Controlling Team: Contract No.(If Applicable):
Signature: Date:

You might also like