Volkswagen Technical Site - http://volkswagen.msk.

ru

Volkswagen Jetta, Golf, GTI 1999, 2000

Electrical Equipment On Board Diagnostic (OBD)
01 On Board Diagnostic (OBD) (Page GR-01)

Instrument panel, On Board Diagnostic (OBD) (through MY 1999)

Clock, correcting
Code Control Module
Consumption indicator, matching
Display group overview
Distance impulse number (K number), reading
Distance travelled (odometer) display, adapting
Fuel gauge (adaptation), checking
Language alternatives for drivers instructions, adapting
Locations of instrument panel senders and sensors
On Board Diagnostic, initiating
Output Diagnostic Test Mode
Read Measuring Value Block
Service interval display, resetting
Service interval, adapting data when changing the instrument panel
Instrument panel On Board Diagnostic (OBD) (from MY 2000)
Code Control Module
Consumption indicator, matching
Display group overview
Distance impulse number (K number), reading
Distance travelled (odometer) display, adapting
Fuel gauge (adaptation), checking
Instrument panel senders and sensors, locations
Language alternatives, adapting for drivers instructions
On Board Diagnostic, initiating
Output Diagnostic Test Mode
Read Measuring Value Block
Service interval data, adapting when changing the instrument panel
Service interval display, resetting
Diagnostic interface for databus
Code Control Module
Display group overview
Read Measuring Value Block
Anti-theft immobilizer On Board Diagnostic (OBD)
Diagnostic Trouble Code (DTC) table
Emergency start function, activating without VAG 1551
Ignition keys, matching
Immobilizer On Board Diagnostic (OBD), initiating
Immobilizer, troubleshooting
Lost key procedure
Procedure after changing engine control module (Matching)
Procedure after changing instrument cluster (Matching)
Read Measuring Value Block
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-1)

Notes:
The instrument panel is installed in conjunction with vehicle equipment level, there are different
versions:
Lowline version with rev counter and digital clock or
Midline version with rev counter and multi-function indicator or
Highline version with rev counter, multi-function indicator and navigation display unit.
Notes when exchanging instrument panels
Instrument panels which do not have the function "Convenience anti-theft system" have a control
unit part number where the last number is a 0 (production to approx. 07.98).
Instrument panels which do have the function "Convenience anti-theft system" have a control unit
part number where the last number is a 1 (production from approx. 08.98).
If a instrument panel with the function "Convenience anti-theft system" is replaced, then for
vehicles with
Radio system Premium IV 05.98
the radio electronic anti-theft system must be reactivated.
Repair Manual, Radio, Telephone, Navigation , Repair Group 91
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-2)

The convenience anti-theft system is operative after first activation of electronic anti-theft system.
Notes on function of of convenience anti-theft system
Repair Manual, Radio, Telephone, Navigation , Repair Group 91
The instrument panel must not be dismantled.
If required the instrument panel is to be exchanged using normal exchange part
procedures.
Complete damage report form and return together with instrument panel.
Use original packaging only when returning items.
The odometer reading and the service interval display can be matched to the
exchange instrument panel using scan tool VAG 1551 Page 01-48.
The instrument panel is controlled via a microprocessor which is equipped with an extensive self-
diagnosis.
If faults occur in the sensors and components being monitored, they will be stored in the fault
memory together with an indication of the type of fault.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-3)

A maximum of 4 faults can be stored simultaneously.

Sporadic faults are automatically cancelled if they are not repeated in next 50 engine starts.
The On Board Diagnostic must be initiated at the commencement of fault finding and the stored
information interrogated with the
Vehicle Diagnosis, Testing and Information system VAS 5051 or
Scan tool VAG 1551 or
Vehicle system tester VAG 1552.
Notes:
The following description deals only with the scan tool VAG 1551.
Measures for repairing commonly occurring faults on particular models
Technical Service Handbook
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-4)

Locations of instrument panel senders and sensors

WARNING!
Disconnect battery earth strap before working on electrical system.

1 - Fuel gauge sender -G

Location Fig. 1
Monitored via self-diagnosis
An additional fuel gauge sender -G169- is installed in four-wheel drive vehicles
Location of -G169- Fig. 2
2 - Ambient temperature sender -G17
Location Fig. 3
Monitored via self-diagnosis
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-5)

3 - Speedometer sender -G22

Location Fig. 4
Monitored via self-diagnosis
4 - Coolant temperature sender -G2
Location depends on type of engine
Repair Manual, Fuel Injection & Ignition, Repair Group 24
Monitored via self-diagnosis
5 - Instrument panel -K
Monitored via self-diagnosis
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-6)

Fig. 1 Fuel gauge sender -G

The fuel gauge sender -G- is located in the fuel tank on the fuel delivery unit -arrow-.
Removing and installing fuel delivery unit
Repair Manual, Engine Mechanical, Repair Group 20

Fig. 2 Additional fuel gauge sender -G169- in four-wheel drive vehicles

In addition to the above mentioned sender -G- there is another sender -G169- in the vehicle
which is located on the left-hand side under the rear seat.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-7)

Fig. 3 Ambient temperature sender -G17

The ambient temperature sender -G17- is located on left of front bumper behind the outer air
grille.
Unclip air grille to remove sender.
Repair Manual, Body-Exterior, Repair Group 63

Fig. 4 Speedometer sender -G22

The speedometer sender -arrow- is located in the area of the left-hand drive shaft flange on
manual and automatic gearbox vehicles.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-8)

On Board Diagnostic, initiating

Special tools, testers, measuring units and auxiliary items required

Scan tool VAG 1551 or vehicle system tester VAG 1552.

VAG 1551/3 or 1551/3A adapter cable

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-9)

Connecting scan tool VAG 1551 and selecting functions (Interrogating unit version)
Check prerequisites:
All fuses according to current flow diagram OK.
Supply voltage OK. (at least 9.0 V).
Connect scan tool using cable VAG 1551/3 as follows:

- Connect cable VAG 1551/3 to diagnosis connector located below dash to left of
steering column

Indicated on display:
* Appears alternately
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-10)

Notes:
If the display remains blank, check VAG 1551 voltage supply according to current
flow diagram.
Electrical Wiring Diagrams Troubleshooting & Component Locations binder
Additional operating instructions can be called up with the scan tool HELP key.
The key serves to advance the programme sequence.
In the operating mode 1 "Rapid data transfer" the function 00 "Automatic test
sequence" can be carried out. Then all vehicle control units will be interrogated
automatically.
- Switch on ignition.
- Switch on printer with the Print key (indicator lamp in key lights up).
- Press key 1 for "Rapid data transfer" mode.

Indicated on display:
- Press keys 1 and 7. "17" enters the address word "Instrument panel".

Indicated on display:
- Confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-11)

Indicated on display:
Interrogate control unit version

Indicated on display for instrument panel with manufacturer's code VDO:

Indicated on display for instrument panel with manufacturer's code MMO:

1- Dependent on engine, gearbox and additional equipment

2- Will be automatically stored in the control unit when entering the system, but not
when Code Control Modules which have been used.
3- Instrument panels which do not have the function "Convenience anti-theft system"
have a control unit part number where the last number is a 0 (production to approx.
07.98).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-12)

Instrument panels which do have the function "Convenience anti-theft system" have a control unit
part number where the last number is a 1 (production from approx. 08.98).
If a instrument panel with the function "Convenience anti-theft system" is replaced, then for
vehicles with
Radio system Premium IV 05.98
the radio electronic anti-theft system must be reactivated.
Repair Manual, Radio, Telephone, Navigation Repair Group 91
The convenience anti-theft system is operative after first activation of electronic anti-theft system.
Notes on function of of convenience anti-theft system
Repair Manual, Radio, Telephone, Navigation Repair Group 91
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-13)

Indicated on display:
Motometer instrument panels are identified by IMMO-IDENTNO: VWZ6 . . ..
VDO instrument panels are identified by IMMO-IDENTNO: VWZ7 . . ..

Will be indicated on display:

- By pressing the "HELP" key a list of possible fault causes is printed out.
- After repairing faults again enter address word 17 for instrument panel and confirm
with Q.

Indicated on display:
- Press key.

Indicated on display:
- Press key.

Indicated on display:
- After the HELP key is pressed, a list of the possible functions is printed out.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-14)

List of selectable functions

Notes:
Do not select further functions, which can be printed out after pressing the HELP
key.
After the function is completed the VAG 1551 returns to the following start position:

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-15)

Interrogating fault memory

Notes:
The displayed fault information is not constantly up-dated, but only when initiating the self-
diagnosis or with the function 05 "Erase fault memory".
- Switch on printer with the Print key (indicator lamp in key lights up).

Indicated on display:
- Press keys 0 and 2. (The function "Interrogate fault memory" is selected with 02.)

Indicated on display:
- Confirm entry with key Q.

The number of stored faults appears in the display.

The stored faults are displayed and printed out one after another.
- Enter fault table at fault printed out and repair fault Page 01-178.

If "No fault recognized" is displayed the programme will return to the start point after pressing
key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-16)

Indicated on display:
If something else is displayed:
Scan tool operating instructions
- End output (function 06) Page 01-18.
- Switch off ignition and separate diagnostic connections.
Erasing fault memory
Notes:
After erasing the fault memory its contents will automatically be indicated. If the fault memory
cannot be erased, again interrogate fault memory and repair faults.
Prerequisites
Fault memory interrogated Page 01-15.
All faults repaired.
After fault memory has been successfully interrogated:

Indicated on display:
- Press keys 0 and 5. (05 selects the "Erase fault memory" function.)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-17)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The fault memory is now erased.
- Press key.

Indicated on display:

Notes:
If this appears in the display, the test sequence is faulty.

If this appears in the display, the test sequence is faulty.

Adhere exactly to test sequence: First interrogate fault memory, if necessary repair faults, then
erase.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-18)

Ending output
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Disconnect scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-19)

Fault table
Notes:
The following table lists all the faults, with the corresponding 5 digit code numbers,
that can be recognized by the instrument panel control unit -J285- and printed out by
the VAG 1551.
Fault codes appear only on print-out.
Before replacing components, check the wiring and connections to these
components as well as the earth connections, according to current flow diagram.
When repair has been carried out, the fault memory must always be interrogated
again with the scan tool VAG 1551 and erased.

*Not for vehicles with Climatronic: A fault entry is made when the fault has been registered
continuously for at least 60 seconds.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-20)

* A fault entry is made when the fault has been registered continuously for at least 20 seconds.
** For vehicles with a multi-function indicator but not with Climatronic
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-21)

* A fault entry "Open circuit/short to positive" is made after the engine has been running for 30
minutes and the fault is recognized.
** Vehicles with Radio/Navigation system and Highline instrument panel only.
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-22)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-23)

Output Diagnostic Test Mode

The Output Diagnostic Test Mode is part of the electrical check. The following components can be
checked via the Output Diagnostic Test Mode:
Speedometer
Rev counter
Coolant temperature gauge
Fuel gauge
Brake system warning lamp
Seat belt warning lamp (when activated using code)
Buzzer/Gong
Displays (odometer, multi-function indicator or digital clock, selector lever position
display for automatic gearboxes)
On Lowline and Midline instrument panels the following can additionally be checked
Coolant temperature/coolant shortage indicator warning lamp
Brake pad wear indicator warning lamp (when activated using code)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-24)

Fuel reserve warning lamp

Oil pressure warning lamp
with Output Diagnostic Test Mode.
On the Highline instrument panel the central display unit for warning lamps and navigation is
checked instead of the individual warning lamps.
- If the self-diagnosis detects a fault, exchange instrument panel.
- If the self-diagnosis does not detect a fault, check wiring and connections to
instrument panel.
Initiating Output Diagnostic Test Mode
Notes:
If the engine is running or the vehicle moving the instrument panel Output Diagnostic
Test Mode cannot be initiated/will be interrupted.
The test sequence can be terminated at any time by pressing the "C" key.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-25)

After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 0 and 3 (03 selects the "Output Diagnostic Test Mode" function).

Indicated on display
- Confirm entry with key Q.
No indication on all displays and all warning lights to be checked are unlit.

Indicated on display
After pressing the Q key the following checks are carried out:
Movement of coolant temperature needle over complete display range
Movement of rev counter needle over complete display range
Movement of speedometer needle over complete display range
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-26)

Movement of fuel gauge needle over complete display range

Notes:
On VDO instrument panels the instruments are activated simultaneously and on Motometer
instrument panels the instruments are activated one after another.
After checking movement over display ranges the following constants are displayed:

- Press key.

Indicated on display:
The warning lamps for
Brake system (insufficient brake fluid, ABS not working)
and additionally for Lowline and Midline instrument panels
Coolant temperature/coolant shortage indicator
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-27)

Brake pad wear (when activated using code)

Fuel reserve
Oil pressure
are activated and light up continuously.
On the Highline instrument panel the central display unit for warning lamps and navigation is
checked instead of the individual warning lamps.
- Press key.

Indicated on display:
The seat belt warning lamp -K19- lights up (when activated by code).
- Press key.

Indicated on display:
The buzzer/gong is activated: a warning tone is emitted at intervals.
- Press key.

Indicated on display:
Midline and Lowline instrument panel:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-28)

All LCD segments in speedometer display and in rev counter are activated and become visible.
In addition for Highline instrument panel:
All segments of display unit for Navigation and warning lamps are visible.
- Press key.

Indicated on display:
Instrument panel VDO:
Safety cut-off -air conditioner compressor cut-off- is activated approx. 5 seconds later (only
vehicles with air conditioning system)
No display in instrument panel!
Instrument panel MMO:
The coolant temperature warning lamp lights up and a warning sound is given.
Safety cut-off -air conditioner compressor cut-off- is activated approx. 5 seconds later (only
vehicles with air conditioning system)
- Press key.

Indicated on display:
- Press key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-29)

Indicated on display for instrument panels with manufacturer code MMO:

Indicated on display for instrument panels with manufacturer code VDO:

End Output Diagnostic Test Mode for VDO instrument panels by pressing key.
All actual values are displayed again.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is again in basic function.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-30)

Code Control Module

Using this function the instrument panel can be coded as follows:
Optional equipment
Country variants
Number of cylinders
Code number for travel impulse number
Notes:
The coding table shows only the various combination possibilities that apply to the
VW Golf 1998 and the Jetta 1999 .
Performing coding
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-31)

After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 0 and 7. (The function "Code control unit" is selected with 07.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Enter code number taken from code table Page 01-33. Example:

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-32)

- Press key.

Indicated on display:
Ending function:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is again in basic function.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-33)

Code table:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-34)

* If more than one optional equipment is to be entered, then the code numbers must be added
together.
Example:
Brake pad wear indicator and washer fluid warning:
01 + 04 = 05
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-35)

The code number for the distance impulse number is dependent on vehicle engine/gearbox
combination:

Notes:
The distance impulse number is a constant used to calculate the speed and distance
travelled.
The distance impulse number (K number) can be read using function "Adaptation"
Page 01-63.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-36)

Read Measuring Value Block

The Measuring Value Block is divided into 4 display group numbers. The assignment of the
individual display fields can be taken from the display group overview Page 01-38.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys -0- and -8- (08 initiates the "Read Measuring Value Block" function).

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
The display group number 001 is an example, to illustrate the sequence.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-37)

- Press keys 0, 0 and 1 for "Display group number 1" and confirm entry with Q key.

Indicated on display: (1...4 = Display zones)

Notes:
To change to another display group proceed as follows:

- Displayed after pressing C key.

Indicated on display:
- Now enter the display group number required.
Notes:
The actual sender and sensor values are always shown on the display. The values
on the instrument panel are filtered and therefore they can vary!
Other display groups are possible but these are not required for fault finding!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-38)

Display group overview

Break down of display content for display group number 001
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-39)

Evaluating display group number 001

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-40)

Break down of display content for display group number 002

1) For instrument panels with multi-function display or Climatronic

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-41)

Evaluating display group number 002

1)On vehicles with a VDO instrument panel "0 L" is displayed in field 2 when fuel level sender has
an open/short circuit and display field 3 remains blank.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-42)

Break down of display content for display group number 003

1) Empty means in this case: Display zone is blank

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-43)

Evaluating display group number 003

1)If the actual coolant temperature value lies between approx. 75 C and 107 C, the instrument
panel will always display 90 C!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-44)

Break down of display content for display group number 050

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-45)

Evaluating display group number 050

1) Empty means in this case: Display zone is blank

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-46)

Adaptation
Using the function adaptation the following changes can be made and stored:
Matching the service interval display (SID)
Matching distance recorders when exchanging instrument panel
Resetting service interval display (SID)
Matching fuel gauge
Correcting consumption indicator
Coding display unit language variants for Navigation (only Highline instrument panel)
The individual functions are called up using the relevant adaptation channel number (see
adaptation table).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-47)

Adaptation table:

Notes:
After changing an adaptation value or ending an adaptation channel the function "10 - Adaptation"
must be performed to select another adaptation channel!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-48)

Service interval, adapting data when changing the instrument panel

When changing the instrument panel the actual service interval data readings for
Oil service (OEL (OIL)), distance travelled in km
Inspection service (INSP), distance travelled in km
and
Inspection service (INSP), time in days
must be transferred to the vehicles new instrument panel.
- The data must be read off before exchanging the defective instrument panel.
Notes:
If the data cannot be read off (defective instrument panel) the data from the vehicle
service schedule must be entered.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-49)

After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Select matching channels individually according to table:
Adaptation table:

Notes:
An incorrect entry can be corrected by pressing the C key.
- Confirm entry with key Q.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-50)

Indicated on new instrument panel display after entering channel number 10:
The selected channel and actual counter reading for the next service are displayed in the top line.
Notes:
Entering the relevant specifications is only possible in steps of 1000 km, therefore
this is shown on display in 1000 km.
The adjustment figure entered must contain 5 figures (e.g. 00009 for adjustment
figure 9 this equates to a distance of 9000 km to next service).
The service type specification establishes the value from which the distance
recorder and the time counter count back for service interval display. Specifications:
Repair Manual, Maintenance
The adaptation sequence must also be carried out using kilometers for instrument
panel with odometer calibrated in miles display. The mileage values must be
converted to kilometer values (1 mile equates to approx. 1.609 kilometers).
Example:
From the defective instrument panel (or the servicing schedule) it has been determined that the
vehicle has driven a total distance of 6000 km. The customer has driven this distance in 170
days.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-51)

All service types must be transferred to the new instrument panel and this equates to the
following matching figures:
Channel 10: 15000 km-6500 km = 9000 km (Adjustment figure 9)
Channel 11: 30000 km-6000 km = 24000 km (Adjustment figure 24)
Channel 12: 360 days-170 days = 190 days (Adjustment figure 19)
Notes:
Because the time counter accuracy equates to 10 days, a year when rounded up equates to 360
days.
- Press key.

Indicated on display:
- Enter new adjustment figure.

Indicated on display after entering adaptation value 9:

- Confirm entry with key Q.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-52)

- Press key.

Indicated on display:
- After matching channel 10 press keys 1 and 0 again. (10 selects the "Adaptation"
function).

Indicated on display:
- Confirm entry with key Q and then enter adaptation values for channels 11 and 12 in
same manner.
End output after entering channels 10 to 12:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Separate connection to scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-53)

Distance travelled (odometer) display, adapting

Notes:
The total distance travelled by the vehicle can be read off the defective instrument
panel or determined using the service schedule.
The total distance travelled on display of new instrument panel must not be more
than 100 km before the matching.
The total distance travelled to be transferred to the new instrument panel must
exceed 100 km.
Matching the total distance travelled is only possible once and only in a positive
direction.
The adaptation can be interrupted with the "C" key of the VAG 1551
Correcting a false entry which has been confirmed is not possible. The instrument
panel must be exchanged for a new one.
The adaptation must take place in kilometers for countries with odometers calibrated
in miles. Therefore convert adaptation value from miles to kilometers. Kilometers =
miles x 1.609.
Example:
The defective instrument panel has an odometer display of 89627 km. The odometer display can
be transferred to the new instrument panel as follows:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-54)

- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
- Confirm entry with Q key.
After displaying the control unit identification and the immobilizer identification number:

Indicated on display:
- Press key 1 and 1.
- Confirm entry with key Q.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Enter code number 13861 now.

Indicated on display:
"FAIL" appears in odometer if a false code or secret number is entered 3 times.
In this case terminal 30 (battery) must be disconnected and reconnected again and the Login
procedure repeated using the correct code number.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-55)

- Confirm entry with the Q key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 9.
- Confirm entry with key Q.

- Indicated on display:
- Move programme on with key.

Indicated on display:
- Enter adaptation value using keyboard.
The last position of the kilometer reading must be rounded off to the nearest 10 kms. A kilometer
reading of 89627 produces an adaptation value of:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-56)

- Enter adaptation value using keyboard.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The kilometer reading entered now appears in the display of the instrument panel. If the displayed
kilometer reading is not OK, e.g. false entry:
- Press C key and enter correct adaptation value again.
If the displayed kilometer reading in instrument panel is OK:
- Confirm entry with key Q.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-57)

- End matching the distance travelled with key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-58)

Service interval display, resetting

Notes:
The service interval display must be reset (adaptation) for
delivery inspection
each oil change service
each inspection service
The service interval display can be reset using two differing procedures:
Via adjustment buttons for trip recorder and clock on instrument panel
Repair Manual, Electrical Equipment , Repair Group 90
or as described in the following,
With scan tool VAG 1551
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".

Indicated on display:
- Confirm entry with Q key.

Indicated on display:
- Press key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-59)

Indicated on display:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Select adaptation channel of service to be reset:
- Channel 10 for display "OIL" service
- Channels 10, 11 and 12 for display "INSP" service
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-60)

Adaptation table:

Notes:
Entering the relevant adaptation values for the distance recorder is only possible in
steps of 1000 km, therefore this is shown on display in 1000 km.
The adaptation values entered must contain 5 figures (e.g. 00015 for adaptation
values 15 this equates to a distance of 15000 km to next service).
The entered values count down to 0 km.
The time counter for INSP service can be adapted to max. 360 days.
It is only possible to make direct entries using the keyboard of the scan tool unit!
When entering an incorrect value the function "Adaptation" is ended and must be
restarted again!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-61)

Example:
Service interval display for service OIL requires resetting:
- Press keys 1 and 0
- Confirm entry with key Q.

Indicated on display: Actual reading of distance recorder is displayed for OIL service (e.g. 1
equates to another 1000 km)
- Press key.

Indicated on display:
The distance recorder must be reset to 15 (equates to 15000 km) to reset the service interval
display for OIL service:
- Enter adaptation value 00015

Indicated on display:
- Confirm entry with key Q.

Indicated on display after entering adaptation value 00015:

- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-62)

- Confirm entry with key Q.

Indicated on display:
- Press key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Observe odometer display in instrument panel.
- Switch off ignition.
When the ignition is switched off the service type shown in display goes out.
- Switch on ignition.
After switching on the ignition the service type is no longer displayed in the odometer display.
The service interval display is now reset.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-63)

Distance impulse number (K number), reading

Notes:
The distance impulse number is a constant used to calculate the speed and distance
travelled.
The distance impulse number (K number) cannot be changed using the "Adaptation"
function.! To change the distance travelled number a code number corresponding to
the vehicle engine/gearbox combination must be entered using the function "Code
Control Module" Page 01-30.
For instrument panels with a display in miles, the distance impulse number will still
be displayed for kilometers. The distance impulse number for miles can be
determined by calculation: Distance impulse number for kilometers x 1.609 =
distance impulse number for miles.
The adaptation function for "Reading distance impulse number" can be interrupted
with the "C" key of the VAG 1551
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-64)

- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 1 and 6.
- Confirm entry with key Q.

Indicated on display:
- Compare distance impulse number for vehicle engine/gearbox combination with
table Page 01-33.
- Interrupt "Reading distance impulse number" with "C" key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-65)

Indicated on display:
- Press "C" key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Separate connection to scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-66)

Fuel gauge (adaptation), checking

If the fuel gauge displays the contents of the fuel tank as being to high or too low the fuel gauge
needle position in the instrument panel can be corrected (adapted).
- Perform Output Diagnostic Test Mode for instrument panel Page 01-23
Check function of fuel gauge sender if Output Diagnostic Test Mode does not display a fault, as
follows:
- Check resistance value of fuel gauge sender in Measuring Value Block. Read
Measuring Value Block Page 01-36
If in read Measuring Value Block no short circuit or open circuit in the wiring or the fuel gauge
sender is displayed, continue checks as follows:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-67)

Adapting fuel gauge

Special tools, testers, measuring units and auxiliary items required

Fuel extraction unit VAG 1433 A

- Switch off ignition.
- Drain fuel tank completely (VAG 1433A), then fill with fuel as per following:
Vehicles with 2 wheel drive: 7 liters
Vehicles with 4 wheel drive: 8 liters
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".

Indicated on display:
- Confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-68)

Indicated on display:
- Press key.

Indicated on display:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 3 and 0.
- Confirm entry with key Q.
Notes:
After filling with fuel, wait at least 60 seconds before reading the fuel gauge.
The fuel level displayed may be incorrect if the prescribed time is not kept, this is
because the movement of the fuel as it is filled will no give a constant fuel level.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-69)

- Using key 1 the adaptation value can be decreased down to 120 and using key 3
increased up to 136, e.g. 130.

- Indicated on display:

The fuel gauge is correctly adapted when the needle is positioned on the center red graduation
(reserve), as illustrated!
When needle position is OK:
- Confirm entry with the Q key.

- Indicated on display:
- Confirm entry with the Q key.

- Indicated on display:
- End matching the fuel gauge with -key.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-70)

Notes:
Renew fuel gauge sender only if fuel gauge cannot be matched correctly.
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is now in basic function again.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-71)

Consumption indicator, matching

Notes:
It is only possible to match the consumption indicator from 85% to 115%.
Entries must be made in steps of 5%.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification.
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 3.
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-72)

Indicated on display:
- Move on with -key.
Notes:
Correcting the consumption indicator is only possible via direct entry!

Indicated on display:
- Enter relevant correction value using keys of scan tool, when doing this fill first
positions with "0".
Example:
Value required: 90 % Keyboard entry: 00090

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-73)

Indicated on display:
- End matching the consumption indicator with -key.

Indicated on display:
Notes:
A false entry switches the tester to functions mode.

If the following display appears:

- Press key.
- Select function "10 - Adaptation" and adaptation channel 03 again.
- Carry out corrections to consumption indicator and confirm with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-74)

Language alternatives for drivers instructions, adapting

Alternative languages variants for driver information can only be adapted on Highline instrument
panels.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification.
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 4.
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-75)

Indicated on display:
Notes:
Only the last character of the five position language variant code is shown on the
display, e.g. 1 for German!
A false entry terminates "Adaptation" and it must be restarted with function "10-
Adaptation"!
Using the keys of the scan tool it is not possible to enter the code direct or in stages!
Code table:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-76)

Staged entry:
- The coding can be decreased with key 1 and increased with key 3, e.g. to 2 for
language variant English.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- End matching language variant with key.

Indicated on display:
Direct entry:
- Press key.

- Indicated on display:
- Enter relevant 5 position code using keyboard Page 01-75
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-77)

Example:
Coding: 2 (English) Input value: 00002
- Confirm entry with the Q key.

- Indicated on display:
- Confirm entry with the Q key.

Indicated on display.
- Confirm entry with the Q key.

Indicated on display:
- End matching language variant with key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is now in basic function again.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-78)

Clock, correcting
The digital clock in the instrument panel may deviate from the correct time by 5 seconds within 24
hours
If the deviation is greater than 5 seconds:
- Check control module version.

In vehicles with a instrument panel from VDO the instrument panel must be replaced.

In vehicles with a instrument panel from Motometer, one must check to see if the digital clock
accuracy can be adjusted:
Notes:
Correction of the clock is only possible with instrument panels manufactured by
Motometer and a limited manufacturing period!
Scan tool VAG 1551 with a programme card version /8.0 is required to correct the
clock!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-79)

Checking VAG 1551 programme card version:

- Press key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Disconnect scan tool VAG 1551.
After approx. 5 seconds:
- Connect cable VAG 1551/3 to diagnosis connector again.

The VAG 1551 display will display the version number, language variant and edition date for
approx. 3 seconds:
If the display of the VAG 1551 does not display programme card version /8.0:
- Obtain programme card version / 8.0 and insert into VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-80)

If the display of the VAG 1551 displays programme card version /8.0:
Adapt clock accuracy
Notes:
The digital clock accuracy can only be adapted with a VAG 1551in conjunction with
the specially prepared programme card.
The scan tool VAG 1551 recognizes the instrument panel control unit version and
checks if a clock correction is possible!
- Switch on ignition.

Indicated on display:
* Appears alternately
- Press key 1 for "Rapid data transfer" mode.

Indicated on display:
- Press keys 1 and 7. "17" enters the address word "Instrument panel".

Indicated on display:
- Confirm entry with Q key.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-81)

Indicated on display of a manufacturer's code MMO instrument panel (example):

After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 1 and 2. (12 selects the "Clock correction" function.)
If the scan tool has recognized a instrument panel where the digital clock cannot be adapted then
function 12 "Clock correction" cannot be selected and the instrument panel must be replaced.

Display remains as:

If the scan tool unit has recognized a instrument panel where the digital clock can be adapted
then function 12 "Clock correction" can be selected.

Indicated on display:
- Confirm entry with key Q.
An automatically controlled sequence is instigated after pressing the Q key on the VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-82)

Indicated on display during the automatically controlled sequence.

Indicated on display after completion of automatically controlled sequence:

- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Disconnect scan tool VAG 1551.
Notes:
After completion of the automatic sequence the instrument panel must be briefly disconnected
from voltage supply terminal 30 to allow the clock correction to take effect.
- Pull fuse 15 (5 A) out of fuse holder and wait at least 10 seconds before fitting again.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel, On Board Diagnostic (OBD) (through MY 1999) (Page 01-83)

The clock correction takes effect after reconnecting the instrument panel to voltage supply
terminal 30.
The digital clock accuracy is now adapted.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-84)

Notes:
The instrument panel is installed in conjunction with vehicle equipment level, there are different
versions:
Lowline version with rev counter and digital clock or
Midline version with rev counter and multi-function indicator or
Highline version with rev counter, multi-function indicator and navigation display unit
(not for USA).
Notes when exchanging instrument panels
The instrument panel must not be dismantled.
If required the instrument panel is to be exchanged using normal exchange part
procedures.
Complete damage report form and return together with instrument panel.
Use original packaging only when returning items.
If instrument panel is replaced, coding of the instrument panel must be performed page 01-116
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-85)

As of model year 2000, there are instrument clusters for vehicles with flexible service intervals
(not for USA) and instrument clusters for vehicles with fixed (pre-set) service intervals, note part
numbers!
Additional information on the vehicle specific maintenance intervals
Vehicle data plate
Service plan
The odometer reading and the service interval display can be matched to the
exchange instrument panel using scan tool VAG 1551 Page 01-141.
If a instrument panel with the function "Convenience anti-theft system" is replaced, then for
vehicles with
Radio system Premium IV 05.98
the radio electronic anti-theft system must be reactivated.
Repair Manual, Radio, Telephone, Navigation Repair Group 91
The convenience anti-theft system is operative after first activation of electronic anti-theft system.
Notes on function of of convenience anti-theft system
Repair Manual, Radio, Telephone, Navigation Repair Group 91
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-86)

In vehicles from 05.99 the instrument cluster is connected to the power-train data-bus.
The databus is also referred to as CAN-databus.
Data can be exchanged between power-train databus and diagnostic wire (K-wire) via the
diagnostic interface for databus -J533- in instrument cluster.
The diagnostic interface for databus -J533- must be coded depending on the vehicle equipment
when replacing the instrument cluster page 01-172
The diagnostic interface for databus -J533- in instrument cluster has a diagnostic address of its
own, page 01-172
The instrument panel is controlled via a microprocessor which is equipped with an extensive self-
diagnosis.
If faults occur in the sensors and components being monitored, they will be stored in the fault
memory together with an indication of the type of fault.
A maximum of 4 faults can be stored simultaneously.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-87)

Sporadic faults are automatically cancelled if they are not repeated in next 50 engine starts.
Notes:
The instrument cluster counts a driving cycle when the ignition is switched on for longer than 5
minutes and the driving speed of at least 30 km/h is exceeded.
The On Board Diagnostic must be initiated at the commencement of fault finding and the stored
information interrogated with the
Vehicle Diagnosis, Testing and Information system VAS 5051 or
Scan tool VAG 1551 or
Vehicle system tester VAG 1552.
Notes:
The following description deals only with the scan tool VAG 1551.
Measures for repairing commonly occurring faults on particular models
Technical Service Handbook
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-88)

Instrument panel senders and sensors, locations

WARNING!
Disconnect battery earth strap before working on electrical system.

1 - Fuel gauge sender -G

Location Fig. 1
Monitored via self-diagnosis
An additional fuel gauge sender -G169- is installed in four-wheel drive vehicles
Location of -G169- Fig. 2
2 - Ambient temperature sender -G17
Location Fig. 3
Monitored via self-diagnosis
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-89)

3 - Speedometer sender -G22

Location Fig. 4
4 - Coolant temperature sender -G2
Location depends on type of engine
Repair Manual, Fuel Injection & Ignition, Repair Group 23
Repair Manual, Fuel Injection & Ignition, Repair Group 24
Monitored via self-diagnosis
5 - Oil Level Thermal Sensor -G266- (not for USA)
6 - Instrument panel -K
Monitored via self-diagnosis
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-90)

Fig. 1 Fuel gauge sender -G

The fuel gauge sender -G- is located in the fuel tank on the fuel delivery unit -arrow-.
Removing and installing fuel delivery unit
Repair Manual, Engine Mechanical, Repair Group 20

Fig. 2 Additional fuel gauge sender -G169- in four-wheel drive vehicles

In addition to the above mentioned sender -G- there is another sender -G169- in the vehicle
which is located on the left-hand side under the rear seat.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-91)

Fig. 3 Ambient temperature sender -G17

The ambient temperature sender -G17- is located on left of front bumper behind the outer air
grille.
Unclip air grille to remove sender.
Repair Manual, Body-Exterior, Repair Group 63

Fig. 4 Speedometer sender -G22

The speedometer sender -arrow- is located in the area of the left-hand drive shaft flange on
manual and automatic gearbox vehicles.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-92)

On Board Diagnostic, initiating

Special tools, testers, measuring units and auxiliary items required

Scan tool VAG 1551 or vehicle system tester VAG 1552.

VAG 1551/3 or 1551/3A adapter cable

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-93)

Connecting scan tool VAG 1551 and selecting functions (Interrogating unit version)
Check prerequisites:
All fuses according to current flow diagram OK.
Supply voltage OK. (at least 9.0 V).
Connect scan tool using cable VAG 1551/3 as follows:

- Open diagnosis connection cover above ashtray.

- Connect cable VAG 1551/3 to diagnosis connector.

Indicated on display:
* Appears alternately
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-94)

Notes:
If the display remains blank, check VAG 1551 voltage supply according to current
flow diagram.
Electrical Wiring Diagrams Troubleshooting & Component Locations binder
Additional operating instructions can be called up with the scan tool HELP key.
The key serves to advance the programme sequence.
In the operating mode 1 "Rapid data transfer" the function 00 "Automatic test
sequence" can be carried out. Then all vehicle control units will be interrogated
automatically.
- Switch on ignition.
- Switch on printer with the Print key (indicator lamp in key lights up).
- Press key 1 for "Rapid data transfer" mode.

Indicated on display:
- Press keys 1 and 7. "17" enters the address word "Instrument panel".

Indicated on display:
- Confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-95)

Indicated on display:
Interrogate control unit version

Indicated on display for instrument panel with manufacturer's code VDO:

Indicated on display for instrument panel with manufacturer's code MMO:

1- Dependent on engine, gearbox and additional equipment

2- Will be automatically stored in the control unit when entering the system, but not
when Code Control Modules which have been used.
3- On new instrument clusters the manufacturer code BOO also appears instead of
MMO.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-96)

If a instrument panel with the function "Convenience anti-theft system" is replaced, then for
vehicles with
Radio system Premium IV 05.98
the radio electronic anti-theft system must be reactivated.
Repair Manual, Radio, Telephone, Navigation Repair Group 91
The convenience anti-theft system is operative after first activation of electronic anti-theft system.
Notes on function of of convenience anti-theft system
Repair Manual, Radio, Telephone, Navigation Repair Group 91
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-97)

- Press key.

Indicated on display:
Motometer instrument panels are identified by IMMO-IDENTNO: VWZ6 . . ..
VDO instrument panels are identified by IMMO-IDENTNO: VWZ7 . . ..

Will be indicated on display:

- By pressing the "HELP" key a list of possible fault causes is printed out.
- After repairing faults again enter address word 17 for instrument panel and confirm
with Q.

Indicated on display:
- Press key.

Indicated on display:
- Press key.

Indicated on display:
- After the HELP key is pressed, a list of the possible functions is printed out.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-98)

List of selectable functions

Notes:
Do not select further functions, which can be printed out after pressing the HELP
key.
After the function is completed the VAG 1551 returns to the following start position:

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-99)

Interrogating fault memory

Notes:
The displayed fault information is not constantly up-dated, but only when initiating the self-
diagnosis or with the function 05 "Erase fault memory".
- Switch on printer with the Print key (indicator lamp in key lights up).

Indicated on display:
- Press keys 0 and 2. (The function "Interrogate fault memory" is selected with 02.)

Indicated on display:
- Confirm entry with key Q.

The number of stored faults appears in the display.

The stored faults are displayed and printed out one after another.
- Enter fault table at fault printed out and repair fault Page 01-178.

If "No fault recognized" is displayed the programme will return to the start point after pressing
key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-100)

Indicated on display:
If something else is displayed:
Scan tool operating instructions
- End output (function 06) Page 01-102.
- Switch off ignition and separate diagnostic connections.
Erasing fault memory
Notes:
After erasing the fault memory its contents will automatically be indicated. If the fault memory
cannot be erased, again interrogate fault memory and repair faults.
Prerequisites
Fault memory interrogated Page 01-99.
All faults repaired.
After fault memory has been successfully interrogated:

Indicated on display:
- Press keys 0 and 5. (05 selects the "Erase fault memory" function.)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-101)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The fault memory is now erased.
- Press key.

Indicated on display:

Notes:
If this appears in the display, the test sequence is faulty.

If this appears in the display, the test sequence is faulty.

Adhere exactly to test sequence: First interrogate fault memory, if necessary repair faults, then
erase.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-102)

Ending output
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Disconnect scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-103)

Fault table
Notes:
The following table lists all the faults, with the corresponding 5 digit code numbers,
that can be recognized by the instrument panel control unit -J285- and printed out by
the VAG 1551.
Fault codes appear only on print-out.
Before replacing components, check the wiring and connections to these
components as well as the earth connections, according to current flow diagram.
When repair has been carried out, the fault memory must always be interrogated
again with the scan tool VAG 1551 and erased.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-104)

*Only for vehicles with Climatronic: A fault entry is made when the fault has been registered
continuously for at least 60 seconds.
*** A malfunction recognition is only performed if the malfunction was detected continuously for at
least 20 seconds. During the first 20 seconds the following is displayed: Sensor cannot be tested
at this time.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-105)

* A fault entry "Open circuit/short to positive" is made after the engine has been running for 30
minutes and the fault is recognized.
**For vehicles with a multi-function indicator but not with Climatronic
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-106)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-107)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-108)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-109)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-110)

Output Diagnostic Test Mode

The Output Diagnostic Test Mode is part of the electrical check. The following components can be
checked via the Output Diagnostic Test Mode:
Speedometer
Rev counter
Coolant temperature gauge
Fuel gauge
Malfunction lamps
Seat belt warning lamp (when activated using code)
Buzzer/Gong
Displays (odometer, multi-function indicator or digital clock, selector lever position
display for automatic gearboxes)
- If the self-diagnosis detects a fault, exchange instrument panel.
- If the self-diagnosis does not detect a fault, check wiring and connections to
instrument panel.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-111)

Initiating Output Diagnostic Test Mode

Notes:
If the engine is running or the vehicle moving the instrument panel Output Diagnostic
Test Mode cannot be initiated/will be interrupted.
The test sequence can be terminated at any time by pressing the "C" key.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 0 and 3 (03 selects the "Output Diagnostic Test Mode" function).

Indicated on display
- Confirm entry with key Q.
No indication on all displays and all warning lights to be checked are unlit.

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-112)

After pressing the Q key the following checks are carried out:
Movement of rev counter needle over complete display range
Movement of speedometer needle over complete display range
Movement of coolant temperature needle over complete display range
Movement of fuel gauge needle over complete display range
Notes:
On VDO instrument panels the instruments are activated simultaneously and on Motometer
instrument panels the instruments are activated one after another.
After checking movement over display ranges the following constants are displayed:

- Press key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-113)

Indicated on display:
The warning lamps are coded according to vehicle equipment.
The warning lamps for the coded equipment function are being triggered and light continuously.
Notes:
In Highline- and Midline- instrument clusters, nothing is displayed in center display during
malfunction lamp test.
- Press key.

Indicated on display:
The seat belt warning lamp -K19- lights up (when activated by code).
- Press key.

Indicated on display:
The buzzer/gong is activated: a warning tone is emitted at intervals.
- Press key.

Indicated on display:
Midline and Lowline instrument panel:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-114)

All LCD segments in speedometer display and in rev counter are activated and become visible.
Also equipment dependant for Midline instrument cluster:
All segments of display unit in center display field of instrument cluster become visible.
In addition for Highline instrument panel:
All segments of display unit for Navigation and warning lamps are visible.
- Press key.

Indicated on display:
Instrument panel VDO:
No display in instrument panel!
Safety cut-off -air conditioner compressor cut-off- is activated approx. 5 seconds later (only
vehicles with air conditioning system)
Instrument panel MMO:
The coolant temperature warning lamp lights up and a warning sound is given.
Safety cut-off -air conditioner compressor cut-off- is activated approx. 5 seconds later (only
vehicles with air conditioning system)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-115)

- Press key.

Indicated on display for instrument panels with manufacturer code MMO:

Indicated on display for instrument panels with manufacturer code VDO:

End Output Diagnostic Test Mode for VDO instrument panels by pressing key.
All actual values are displayed again.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is again in basic function.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-116)

Code Control Module

Using this function the instrument panel can be coded as follows:
Optional equipment
Country variants
Number of cylinders
Code number for travel impulse number
Displayed codes in the coding table are only valid for
Golf 05.99
Jetta 05.99
Golf Variant 05.99
Jetta Variant 05.99
Performing coding
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-117)

- Press key.

Indicated on display:
- Press keys 0 and 7. (The function "Code control unit" is selected with 07.)

Indicated on display:
- Confirm entry with key Q.
Perform coding

Indicated on display:
- Enter code number compiled from code table
Breakdown of code number:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-118)

Code table:

1)If more than one optional equipment is to be entered, then the code numbers must be added
together.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-119)

Example:
Brake pad wear indicator and washer fluid warning:
01 + 04 = 05
The code number for the distance impulse number is dependent on vehicle engine/gearbox
combination:

Notes:
The distance impulse number is a constant used to calculate the speed and distance
travelled.
The distance impulse number (K number) can be read using function "Adaptation"
Page 01-63.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-120)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press key.

Indicated on display:
- Press key.

Indicated on display:
Ending function:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-121)

Read Measuring Value Block

The Measuring Value Block is divided into 4 display group numbers. The assignment of the
individual display fields can be taken from the display group overview Page 01-123.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys -0- and -8- (08 initiates the "Read Measuring Value Block" function).

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
The display group number 001 is an example, to illustrate the sequence.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-122)

- Press keys 0, 0 and 1 for "Display group number 1" and confirm entry with Q key.

Indicated on display: (1...4 = Display zones)

Notes:
To change to another display group proceed as follows:

- Displayed after pressing C key.

Indicated on display:
- Now enter the display group number required.
Notes:
The actual sender and sensor values are always shown on the display. The values
on the instrument panel are filtered and therefore they can vary!
Other display groups are possible but these are not required for fault finding!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-123)

Display group overview

Break down of display content for display group number 001
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-124)

Evaluating display group number 001

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-125)

Break down of display content for display group number 002

1) For instrument panels with multi-function display or Climatronic

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-126)

Evaluating display group number 002

1)For an open circuit of the fuel level seder, "0L" is displayed in field 2, the value 510 is
displayed in field 3; for a short circuit of the fuel level seder, "0L" is displayed in field 2, the value
0 is displayed in field 3.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-127)

Break down of display content for display group number 003

1) Empty means in this case: Display zone is blank

2)
After switching ignition on, the warning lamp for oil level blinks for 5 seconds if there is a
malfunction in the system (not for USA)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-128)

Evaluating display group number 003

1)If the actual coolant temperature value lies between approx. 75 C and 107 C, the instrument
panel will always display 90 C!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-129)

1)If the actual coolant temperature value lies between approx. 75 C and 107 C, the instrument
panel will always display 90 C!
2)
After switching ignition on, the warning lamp for oil level blinks for 5 seconds if there is a
malfunction in the system.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-130)

Break down of display content for display group number 050

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-131)

Evaluating display group number 050

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-132)

The condition of the databus function for control modules which are connected to the power-train
databus is displayed in display groups 125 to 127.
The display fields for control modules which are not installed remain empty.
In the following measuring value blocks, condition displays for all control modules which may be
connected to the power-train databus are mentioned.
The occupations of the display fields are different depending on the manufacturer of the
instrument cluster (VDO or MMO).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-133)

Break down of display content for display group number 125

1) only for VDO, for Motometer in display group 126, display field 2
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-134)

Evaluating display group number 125

Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-135)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-136)

Break down of display content for display group number 126

1) Empty means in this case: Display zone is blank

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-137)

Evaluating display group number 126

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-138)

Adaptation
Using the function adaptation the following changes can be made and stored:
Matching the service interval display (SID)
Matching distance recorders when exchanging instrument panel
Resetting service interval display (SID)
Matching fuel gauge
Correcting consumption indicator
Coding display unit language variants for Navigation (only Highline instrument panel)
The individual functions are called up using the relevant adaptation channel number (see
adaptation table).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-139)

Adaptation table:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-140)

Notes:
After changing an adaptation value or ending an adaptation channel the function "10 - Adaptation"
must be performed to select another adaptation channel!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-141)

Service interval data, adapting when changing the instrument panel

When changing the instrument panel the actual service interval data readings for
driven distance since last inspection
time elapsed since last inspection
upper limit for driving distance until inspection
upper limit for time until inspection
quality value of the new engine oil
must be transferred to the vehicles new instrument panel.
- The data must be read off before exchanging the defective instrument panel.
Notes:
If the data cannot be read off (defective instrument panel) the data from the vehicle
service schedule must be entered.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-142)

- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Select adaptation channels individually according to table and press Q button to
confirm selection:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-143)

Adaptation table:

Notes:
Input of the adaptation values for oil quality of new oil is only possible for instrument
clusters with flexible service intervals; valid input values:
Repair Manual, Maintenance
For the adaptation of the service interval display channels 43, 44 and 45 must be
adapted first, since the values of channels 40 and 41 cannot be larger than the
limited values of channels 43 and 44.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-144)

Notes:
The currently valid upper limit values for the driven distance and time until inspection
can be taken from the service plan.
Repair Manual, Maintenance
Specification of engine oil quality: gasoline engines 50300 Diesel engines 50600
Repair Manual, Maintenance
The adjustment figure entered must contain 5 figures (e.g. 00009 for adjustment
figure 9 this equates to a distance of 9000 km to next service).
The adaptation sequence must also be carried out using kilometers for instrument
panel with mileage display. The mileage values must be converted to kilometer
values (1 mile equates to approx. 1.609 kilometers).
The day count for 1 year is 365 days (Leap years are not taken into account).
The adaptation can be interrupted with the "C" key of the VAG 1551
Example:
From the defective instrument panel (or the servicing schedule) it has been determined that the
vehicle has driven a total distance of 6000 km. The customer has driven this distance in 170
days.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-145)

The engine of the vehicle was filled with engine oil according to specification 50600 at the last
inspection.
In the new instrument cluster the adaptation channels 43, 44, 45, 40 and 41 must be adapted so
that the following adaptation values result.
Channel 43: Upper limit for distance driven until next inspection Adaptation value 30 (30 x
1000 km = 30000 km)
Channel 44: Upper limit for time until next inspection Adaptation value 730 (730 x 1 day = 730
days)
Channel 45: Oil quality of new engine oil Adaptation value 4 (= very good)
Channel 40: Last inspection 6000 km ago Adaptation value 60 (60 x 100 km = 6000 km)
Channel 41: Last inspection 170 days ago Adaptation value 170 (170 x 1 day = 170 days)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-146)

Indicated on new instrument panel display after entering channel number 10:

Instrument panel MMO:

Instrument panel VDO:

The selected channel and actual current value of adaptation of maximum value for odometer
reading until the next service are displayed.
- Press key.

Indicated on display:
- Enter new adjustment figure.
Indicated on display after entering adaptation value 30:

Instrument panel MMO:

Instrument panel VDO:

- Confirm entry with key Q.

Indicated on display:
- Confirm entry with key Q.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-147)

Indicated on display:
- Press key.

Indicated on display:
- After matching channel 43 press keys 1 and 0 again. (10 selects the "Adaptation"
function.)

Indicated on display:
- Confirm entry with key Q and then enter adaptation values for channels 44, 45, 40
and 41 in same manner.
End output after adaptation of corresponding channels:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Separate connection to scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-148)

Distance travelled (odometer) display, adapting

Notes:
The total distance travelled by the vehicle can be read off the defective instrument
panel or determined using the service schedule.
The total distance travelled on display of new instrument panel must not be more
than 100 km before the matching.
The total distance travelled to be transferred to the new instrument panel must
exceed 100 km.
Matching the total distance travelled is only possible once and only in a positive
direction.
The adaptation can be interrupted with the "C" key of the VAG 1551
Correcting a false entry which has been confirmed is not possible. The instrument
panel must be exchanged for a new one.
The adaptation must take place in kilometers for countries with odometers calibrated
in miles. Therefore convert adaptation value from miles to kilometers. Kilometers =
miles x 1.609.
Example:
The defective instrument panel has an odometer display of 89627 km. The odometer display can
be transferred to the new instrument panel as follows:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-149)

- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
- Confirm entry with Q key.
After displaying the control unit identification and the immobilizer identification number:
Notes:
The login procedure is only essential for VDO instrument clusters, for Motometer instrument
clusters the adaptation function can be selected right away.

Indicated on display:
- Press key 1 and 1.
- Confirm entry with key Q.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Enter code number 13861 now.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-150)

"FAIL" appears in odometer if an incorrect is entered 3 times.

In this case terminal 30 (battery) must be disconnected and reconnected again and the Login
procedure repeated using the correct code number.
- Confirm entry with the Q key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 9.
- Confirm entry with key Q.

- Indicated on display:
- Move programme on with key.

Indicated on display:
- Enter adaptation value using keyboard.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-151)

The last position of the kilometer reading must be rounded off to the nearest 10 kms. A kilometer
reading of 89627 produces an adaptation value of:

- Enter adaptation value using keyboard.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The kilometer reading entered now appears in the display of the instrument panel. If the displayed
kilometer reading is not OK, e.g. false entry:
- Press C key and enter correct adaptation value again.
If the displayed kilometer reading in instrument panel is OK:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-152)

- Confirm entry with key Q.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- End matching the distance travelled with key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-153)

Service interval display, resetting

The service interval display must be reset (adaptation) for
delivery inspection
each inspection service

The service interval display can be reset using two differing procedures:
Via adjustment buttons for trip recorder and clock on instrument panel
Repair Manual, Electrical Equipment , Repair -Group 90
or as described in the following,
Scan tool VAG 1551 Page 01-92
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification.
- Press key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-154)

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 2.
Adaptation channel 02 will reset the service interval display.
- Confirm entry with key Q.

Indicated on display:
- Press key.
Notes:
The adaptation value on the top line is the current service type interval display status:
0-No service event active
1-Service event active
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-155)

Indicated on display:
The service due displayed in the instrument panel will be reset by entering the appropriate
adaptation value.
Notes:
Counters of the service interval display are re-set by entering'00000.'
The counters are also re-set if the adaptation value is '0' and no service pre-warning
or service request is displayed yet.
- Enter adaptation value 00000.

Indicated on display:
- Confirm entry with key Q.

Indicated on display after entering adaptation value 00010:

- Confirm entry with key Q.

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-156)

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
The service interval display is now reset.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-157)

Distance impulse number (K number), reading

Notes:
The distance impulse number is a constant used to calculate the speed and distance
travelled.
The distance impulse number (K number) cannot be changed using the "Adaptation"
function.! To change the distance travelled number a code number corresponding to
the vehicle engine/gearbox combination must be entered using the function "Code
Control Module" Page 01-116.
For instrument panels with a display in miles, the distance impulse number will still
be displayed for kilometers. The distance impulse number for miles can be
determined by calculation: Distance impulse number for kilometers x 1.609 =
distance impulse number for miles.
The adaptation function for "Reading distance impulse number" can be interrupted
with the "C" key of the VAG 1551
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-158)

- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification and the immobilizer identification number:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 1 and 6.
- Confirm entry with key Q.

Indicated on display:
- Compare distance impulse number for vehicle engine/gearbox combination with
table Page 01-118.
- Interrupt "Reading distance impulse number" with "C" key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-159)

Indicated on display:
- Press "C" key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Separate connection to scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-160)

Fuel gauge (adaptation), checking

If the fuel gauge displays the contents of the fuel tank as being to high or too low the fuel gauge
needle position in the instrument panel can be corrected (adapted).
- Perform Output Diagnostic Test Mode for instrument panel Page 01-110
Check function of fuel gauge sender if Output Diagnostic Test Mode does not display a fault, as
follows:
- Check resistance value of fuel gauge sender in Measuring Value Block. Read
Measuring Value Block Page 01-121
If in read Measuring Value Block no short circuit or open circuit in the wiring or the fuel gauge
sender is displayed, continue checks as follows:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-161)

Adapting fuel gauge

Special tools, testers, measuring units and auxiliary items required

Fuel extraction unit VAG 1433 A

- Switch off ignition.
- Drain fuel tank completely (VAG 1433A), then fill with fuel as per following:
Vehicles with 2 wheel drive: 7 liters
Vehicles with 4 wheel drive: 8 liters
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".

Indicated on display:
- Confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-162)

Indicated on display:
- Press key.

Indicated on display:
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 3 and 0.
- Confirm entry with key Q.
Notes:
After filling with fuel, wait at least 60 seconds before reading the fuel gauge.
The fuel level displayed may be incorrect if the prescribed time is not kept, this is
because the movement of the fuel as it is filled will no give a constant fuel level.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-163)

Using key 1 the adaptation value can be decreased down to 120 and using key 3 increased up to
136, e.g. 130.

- Indicated on display:

The fuel gauge is correctly adapted when the needle is positioned on the center red graduation
(reserve), as illustrated!
When needle position is OK:
- Confirm entry with the Q key.

- Indicated on display:
- Confirm entry with the Q key.

- Indicated on display:
- End matching the fuel gauge with -key.

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-164)

Notes:
Renew fuel gauge sender only if fuel gauge cannot be matched correctly.
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is now in basic function again.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-165)

Consumption indicator, matching

Notes:
It is only possible to match the consumption indicator from 85% to 115%.
Entries must be made in steps of 5%.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification.
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 3.
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-166)

Indicated on display:
- Move on with -key.
Notes:
Correcting the consumption indicator is only possible via direct entry!

Indicated on display:
- Enter relevant correction value using keys of scan tool, when doing this fill first
positions with "0".
Example:
Value required: 90 % Keyboard entry: 00090

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-167)

Indicated on display:
- End matching the consumption indicator with -key.

Indicated on display:

If the following display appears:

- Press key.
- Select function "10 - Adaptation" and adaptation channel 03 again.
- Carry out corrections to consumption indicator and confirm with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-168)

Language alternatives, adapting for drivers instructions

Alternative languages variants for driver information can only be adapted on Highline instrument
panels.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
After displaying the control unit identification.
- Press key.

Indicated on display:
- Press keys 1 and 0. (10 selects the "Adaptation" function.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Press keys 0 and 4.
- Confirm entry with the Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-169)

Indicated on display:
Notes:
Only the last character of the five position language variant code is shown on the
display, e.g. 1 for German!
A false entry terminates "Adaptation" and it must be restarted with function "10-
Adaptation"!
Using the keys of the scan tool it is not possible to enter the code direct or in stages!
Code table:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-170)

Staged entry:
- The coding can be decreased with key 1 and increased with key 3, e.g. to 2 for
language variant English.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
- End matching language variant with key.

Indicated on display:
Direct entry:
- Press key.

- Indicated on display:
- Enter relevant 5 position code using keyboard Page 01-169
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Instrument panel On Board Diagnostic (OBD) (from MY 2000) (Page 01-171)

Example:
Coding: 2 (English) Input value: 00002
- Confirm entry with the Q key.

- Indicated on display:
- Confirm entry with the Q key.

Indicated on display.
- Confirm entry with the Q key.

Indicated on display:
- End matching language variant with key.

Indicated on display:
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The tester is now in basic function again.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-172)

In vehicles from 05.99 the instrument cluster is connected to the power-train data-bus.
The databus is also referred to as CAN-databus.
Data can be exchanged between power-train databus and diagnostic wire (K-wire) via the
diagnostic interface for databus -J533- in instrument cluster.
The diagnostic interface for databus -J533- must be coded depending on the vehicle equipment
when replacing the instrument cluster page 01-172
The diagnostic interface for databus -J533- in instrument cluster has a diagnostic address of its
own, page 01-172
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 19 "Gateway".

Indicated on display:
- Press keys 1 and 9. "19" enters the address word "Gateway".

Indicated on display:
- Confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-173)

Indicated on display:

Indicated on display:

1- Dependant upon the control modules which are connected to the power-train
databus.
2- The diagnostic interface for databus -J533- in instrument cluster is referred to in the
On Board Diagnostic (OBD) as 'Gateway.'
- Press key.

Indicated on display:
- After the HELP key is pressed, a list of the possible functions is printed out.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-174)

List of selectable functions

Notes:
Do not select further functions, which can be printed out after pressing the HELP
key.
After the function is completed the VAG 1551 returns to the following start position:

Indicated on display:
Interrogating fault memory
Notes:
The displayed fault information is not constantly up-dated, but only when initiating the self-
diagnosis or with the function 05 "Erase fault memory".
- Switch on printer with the Print key (indicator lamp in key lights up).

Indicated on display:
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-175)

- Press keys 0 and 2. (The function "Interrogate fault memory" is selected with 02.)

Indicated on display:
- Confirm entry with key Q.

The number of stored faults appears in the display.

The stored faults are displayed and printed out one after another.
- Enter fault table at fault printed out and repair fault Page 01-178.

If "No fault recognized" is displayed the programme will return to the start point after pressing
key.

Indicated on display:
If something else is displayed:
Scan tool operating instructions
- End output (function 06) Page 01-102.
- Switch off ignition and separate diagnostic connections.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-176)

Erasing fault memory

Notes:
After erasing the fault memory its contents will automatically be indicated. If the fault memory
cannot be erased, again interrogate fault memory and repair faults.
Prerequisites
Fault memory interrogated Page 01-99.
All faults repaired.
After fault memory has been successfully interrogated:

Indicated on display:
- Press keys 0 and 5 (05 selects "Erase fault memory" function)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
The fault memory is now erased.
- Press key.

Indicated on display:

Notes:
If this appears in the display, the test sequence is faulty.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-177)

Notes:
If this appears in the display, the test sequence is faulty.
Adhere exactly to test sequence: First interrogate fault memory, if necessary repair faults, then
erase.
Ending output
- Press keys 0 and 6. (The function "End output" is selected with 06.)

Indicated on display:
- Confirm entry with key Q.

Indicated on display:
- Switch off ignition.
- Disconnect scan tool VAG 1551.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-178)

Fault table
Notes:
The following table lists all the faults, with the corresponding 5 digit code numbers,
that can be recognized by the instrument panel control unit -J285- and printed out by
the VAG 1551.
Fault code appears only on print-out.
When repair has been carried out, the fault memory must always be interrogated
again with the scan tool VAG 1551 and erased.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-179)

Code Control Module

Performing coding for diagnostic interface -J 533-
- Press keys 0 and 7. (The function "Code control unit" is selected with 07.)

Indicated on display:
- Confirm entry with key Q.
Performing coding

Indicated on display:
- Enter code number compiled from code table

Codes for control modules which are installed in vehicles and which are connected to the power-
train databus must be added.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-180)

Example:
Airbag + ABS + autom. transmission:
00004 + 00002 + 00001 = 00007

Indicated on display (example):

- Confirm entry with key Q.

Indicated on display:
Ending function:
- Press keys 0 and 6. (The function "End output" is selected with 06.)
The tester is again in basic function.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-181)

Read Measuring Value Block

The Measuring Value Block is divided into 4 display group numbers. The assignment of the
individual display fields can be taken from the display group overview Page 01-184.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch
on ignition and enter address word 17 "Instrument panel".
- Press key.

Indicated on display:
- Press keys -0- and -8- (08 initiates the "Read Measuring Value Block" function).

Indicated on display:
- Confirm entry with the Q key.

Indicated on display:
The display group number 001 is an example, to illustrate the sequence.
- Press keys 0, 0 and 1 for "Display group number 1" and confirm entry with Q key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-182)

Indicated on display: (1...4 = Display zones)

Notes:
To change to another display group proceed as follows:

- Displayed after pressing C key.

Indicated on display:
- Now enter the display group number required.
Notes:
The actual sender and sensor values are always shown on the display. The values
on the instrument panel are filtered and therefore they can vary!
Other display groups are possible but these are not required for fault finding!
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-183)

The condition of the databus function for control modules which are connected to the power-train
databus is displayed in display groups 125 to 127.
The display fields for control modules which are not installed remain empty.
In the following measuring value blocks, condition displays for all control modules which may be
connected to the power-train databus are mentioned.
Assignment of the display fields is different depending on the instrument cluster manufacturer
(VDO or MMO).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-184)

Display group overview

Break down of display content for display group number 125
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-185)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-186)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-187)

Break down of display content for display group number 126

1) Empty means in this case: Display zone is blank

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-188)

Evaluating display group number 126

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-189)

Break down of display content for display group number 127

1) Empty means in this case: Display zone is blank

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Diagnostic interface for databus (Page 01-190)

Evaluating display group number 127

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-191)

The immobilizer electronics consist of:

control electronics in instrument cluster
a warning light for anti-theft immobilizer sensor -K117- in instrument cluster
(speedometer display)
a matched engine control module
an induction coil on the ignition lock
matched ignition keys with electronic components (transponder and response reader
memory)
Malfunction recognition and Diagnostic Trouble Code (DTC) display via warning light for
anti-theft immobilizer sensor
An intact immobilizer system is indicated by the warning light for anti-theft immobilizer sensor -
K117- lighting up and going out after approx. 3 seconds when the ignition is switched on.
Warning light flashes or stays lit when the ignition is switched on (indicates a malfunction in
system) if:
the ignition key has been carried out incorrectly.
no transponder (response reader memory) is present in ignition key.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-192)

An unauthorized ignition key is used.

an unauthorized engine control module is detected.
a malfunction is present in the induction coil of anti-theft immobilizer -D2-.
a malfunction is present in the data wiring.
Warning light does not light up when the ignition is switched on if:
the immobilizer control module has detected an authorized key.
the immobilizer control module has not detected an incorrect engine control module.
the immobilizer control module is currently "matching keys" and after matching the
keys no malfunction has occurred.
To troubleshoot, perform the On Board Diagnostic (OBD) program and retrieve the stored
information with either the VAG 1551/1552 Scan Tool or VAS 5051 Vehicle Diagnostic, Testing
and Information System.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-193)

Immobilizer On Board Diagnostic (OBD), initiating

Steps for repairing type specific malfunctions
Technical service handbook
If malfunctions occur in the sensors and components being monitored, they will be stored in the
Diagnostic Trouble Code (DTC) memory together with an indication of the type of malfunction.
A maximum of 4 DTCs can be stored simultaneously.
Sporadic malfunctions are automatically cancelled if they are not repeated in next 50 engine
starts.
OBD must be initiated at the commencement of troubleshooting and the stored information
checked with the VAG 1551/1552 Scan Tool or VAS 5051 Vehicle Diagnostic, Testing and
Information System.
Notes:
The following description deals only with the VAG 1551Scan Tool.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-194)

The information displayed is used in conjunction with a DTC table which has information on the
possible causes for pin-pointed repair steps.
Connecting VAG 1551 Scan Tool and selecting functions (Checking control module
version)
Checking requirements:
All fuses OK according to wiring diagram
Supply voltage OK (at least 9.0 V).
Connect VAG 1551 using cable VAG 1551/3 as follows:

- Connect cable VAG 1551/3 to diagnosis connector located below dash to left of
steering column

Indicated on display
* Appears alternately
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-195)

Notes:
If the display remains blank, check the VAG 1551 voltage supply according to the
wiring diagram.
Electrical Wiring Diagrams, Troubleshooting and Component Locations binder
Additional operating instructions can be called up with the scan tool -HELP- button.
The button advances the program sequence.
In the operating mode 1 "Rapid data transfer" the function 00 "Automatic test
sequence" can be carried out. All vehicle control modules will be checked
automatically.
- Switch ignition on.
- Switch printer on with Print button (indicator lamp in button lights up).
- Press button -1- for "Rapid data transfer" mode.

Indicated on display
- Press buttons -1- and -7- to select "Instrument Cluster" address word 17.
- Confirm entry with -Q- button.

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-196)

- Press button.

Indicated on display
Immobilizer identification number (14 characters, VW...)
- Press button.

Indicated on display

Indicated on display
By pressing the -HELP- button a list of possible malfunction causes is printed out.
- After correcting malfunctions, enter address word 17 again for instrument cluster and
confirm with -Q- button.

Indicated on display
- Press button.

Indicated on display
If the -HELP- button is pressed, a list of selectable functions is printed out.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-197)

List of selectable functions

Notes:
Do not select further functions other than those listed above (which can be printed
out after pressing the -HELP- button).
After the function is completed the VAG 1551 returns to the following start position:

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-198)

Checking DTC memory

Notes:
The displayed DTC information is not constantly up-dated, but is only restarted when initiating the
On Board Diagnostic (OBD) or with function 05 "Erase DTC memory".
- Switch printer on with -Print- button (indicator lamp in button lights up).

Indicated on display
- Press buttons -0- and -2- to select "Check DTC memory" function 02.

Indicated on display
- Confirm entry with -Q- button.

The number of stored DTCs appears in the display.

The stored DTCs are displayed and printed out one after another.
- Locate DTC printed out in DTC table and correct Page 01-202.

If "No DTC recognized" is displayed the program will return to the starting point after pressing the
button.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-199)

Indicated on display
If display reads otherwise:
Scan tool operating instructions
- Press buttons -0- and -6- to select "End output" function 06 Page 01-201
- Switch ignition off and separate DLC.
Erasing DTC memory
Notes:
After erasing the DTC memory its contents will automatically be indicated. If the DTC memory
cannot be erased, again check the DTC memory and repair malfunctions.
Requirements
DTC memory has been checked Page 01-198
All malfunctions repaired.
After the DTC memory has been successfully checked:

Indicated on display
- Press buttons -0- and -5- to select "Erase DTC memory" function 05.

Indicated on display
- Confirm entry with -Q- button.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-200)

Indicated on display
The Diagnostic Trouble Code (DTC) memory is now erased.
- Press button.

Indicated on display
Notes:

If this appears in the display, the test sequence is faulty.

If this appears in the display, the test sequence is faulty.

Adhere exactly to the test sequence: First check the Diagnostic Trouble Code (DTC) memory
and, if necessary, repair any malfunctions.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-201)

Ending output
- Press buttons -0- and -6- to select "End output" function 06.

Indicated on display
- Confirm entry with -Q- button.

Indicated on display
- Switch ignition off.
- Disconnect harness connector to VAG 1551 Scan tool.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-202)

Diagnostic Trouble Code (DTC) table

CAUTION!
After repairs the DTC memory of the engine control module must always be checked and
the DTC memory content "Engine control module blocked" erased. Check and eliminate
any further malfunctions stored.
Notes:
All static and sporadic malfunctions are stored in the DTC memory: A malfunction is
recognized as a static malfunction when it is present for a minimum of 2 seconds. If
the malfunction is no longer present after this time, it is stored as a sporadic fault
and "/SP" appears on the display.
After switching on the ignition, malfunctions stored are first recognized as sporadic
and are changed to static if they are present after the check has been completed.
If a sporadic malfunction is no longer present during the next 50 driving cycles
(ignition on for a minimum of 2 seconds) it is erased.
The following table lists all the malfunctions, with the corresponding 5-digit code
numbers, that can be recognized by the immobilizer control module and printed out
by the VAG 1551.
DTCs appear only on a print-out.
Before replacing a component shown as faulty, check wiring and connections to the
component as well as Ground connections according to the wiring diagram.
When the repair has been completed, the DTC memory must always be checked
again with the VAG 1551 and then erased.
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-203)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-204)
Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-205)
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-206)

Read Measuring Value Block

Indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" function 08.

Indicated on display
- Confirm entry with -Q- button.

Indicated on display
- Press buttons -0-, -2 and -2-.
- Confirm entry with -Q- button.
Notes:
When the printer is switched on the actual display is printed out.

- Indicated on display, for example

Evaluating Measuring Value Block
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-207)

Evaluating malfunctions:
Start authorized: "0":
A non-coded or incorrectly coded key has been used or the engine control module has an
incorrect code or a malfunction check engine control module DTC memory.
Engine control module answers: "0":
There is a malfunction in the engine control module or in wiring Check engine control module
DTC memory.
Key condition OK: "0":
A faulty key or a key without transponder has been used
An ignition key with an incorrect type of transponder was used (fixed code
transponder)
Induction coil malfunction
- Check DTC memory (function 02).
Number of matched keys: 2
If the value displayed in the first 3 display fields is 1:
- Press button -3-.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-208)

- Indicated on display, for example

If something different appears on the display, the "Matching of keys" function must be performed,
Page 01-209.
If a "0" is displayed in display field 3:
An ignition key with an incorrect type of transponder was used.
- Obtain a key with correct type of transponder.
Notes:
There are various types of ignition keys with various types of transponders. Observe when
ordering parts!
- Press button.

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-209)

Ignition keys, matching

Notes:
If new or additional ignition keys are required they must be matched to the
immobilizer control module.
Note the procedure when changing the locking set and the immobilizer control
module.
The matching procedure must always be carried out for all the ignition keys,
including the existing ones.
The number of keys already matched will be displayed when the adaptation
(matching) function is selected.
If only one key is matched, the vehicle can be started immediately with this key. If
more than one key has been matched, the vehicle can only be started immediately
with the last key matched.
The matching procedure can be interrupted by pressing the -C- button on the VAG
1551.
CAUTION!
The VAG 1551 dealership number (workshop code) will be stored in the immobilizer
control module when matching ignition keys.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-210)

Requirements
All ignition keys available. If no old ignition key is available see "Lost key procedure",
Page 01-215
Key fob with covered secret number is available, if not see "Establishing secret
number", Page 01-215
- Insert correct profile ignition key in ignition lock.
- Connect VAG 1551, select operating mode 1, "Rapid data transfer", switch ignition
on and enter address word 17 "Instrument cluster".
After displaying the immobilizer identification:
- Press button.

Indicated on display
- Press button -1- twice to select "Login procedure" function 11.

Indicated on display
- Confirm entry with -Q- button.

Indicated on display
- Enter secret number, when doing this place a 0 before 4 digit number (example:
01915).
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-211)

Key chain with secret code is no longer available for m.y. 2000.
If the 4-digit secret number is not known or the key fob with the secret number is not available, the
secret number must be requested from the dealership or importer using the 14-character
immobilizer control module identification number.
The secret number is located on the key fob and is visible by carefully scratching off the
protective coating (e.g. using coin).
- Confirm entry with -Q- button.

Indicated on display

If this appears on display for a brief moment:

The secret number is not accepted.
- Enter secret number again.
Notes:
3 attempts to enter the secret number are possible immediately. The next 3 attempts
are only possible after a minimum of 10 minutes (if the ignition remains switched on
during this time and the OBD is exited via the function 06 "End output").
The waiting period between each 3 attempts doubles each time up to a maximum of
255 minutes.
- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-212)

- Confirm entry with -Q- button.

Indicated on display
- Press buttons -2- and -1- to select "Channel 21".
- Confirm entry with -Q- button.

If the following display appears

- Repeat adaptation by entering secret number.

Indicated on display
The top line of the display shows that 2 ignition keys are matched to the system.
- Press button.

Indicated on display
- Press button -0- four times and then enter number of all ignition keys to be matched,
including existing key (e.g. 00003); max. possible Qty.: 8.
- Confirm entry with -Q- button.

Indicated on display for 3 ignition keys to be matched

- Confirm entry with -Q- button.

Indicated on display
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-213)

- Confirm entry with -Q- button.

Indicated on display
VDO instrument clusters:
The warning light -K117- goes out.
The key in the ignition/starter lock is now matched.
- Press button.
- Switch ignition off and remove key.
- Insert next key in ignition/starter lock and switch ignition on again.
The warning light -K117- lights up for approx. 2 seconds and then goes out.
- As soon as warning light for anti-theft immobilizer sensor -K117- in instrument
cluster goes out, switch ignition off again.
- Repeat this procedure until all keys are matched.
The warning light -K117- flashes briefly after the last ignition key is matched signifying the
matching sequence is completed.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-214)

Notes:
If the warning light continues flashing the key matching is faulty and must be
performed again.
The warning light flashes quickly if the 30 seconds are exceeded when matching all
ignition keys. When the ignition is switched off the time is not registered.
The matching of ignition keys is automatically terminated when:
Number of keys to be matched is reached.
An already matched key is used to switch the ignition on again and the ignition
remains switched on for longer than 1 second (DTC is stored)
Permissible matching period of 30 seconds is exceeded (DTC is stored) after
switching ignition on using the 2nd key.
- Select "Check DTC memory" function 02. If there is no malfunction stored, matching
of keys has been successfully completed.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-215)

Lost key procedure

- Order replacement ignition key using the lock number.
- Match ignition key Page 01-209
Determining secret number
If the 4-digit secret number is not known or the key fob with the secret number is not available, the
secret number must be requested from the dealership or importer using the 14-character
immobilizer control module identification number.
- Initiate OBD of instrument cluster.
- Read 14-character immobilizer identification number:

Indicated on display (example)

 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-216)

Procedure after changing instrument cluster (Matching)

Installing a new instrument cluster
The immobilizer identification number and secret number are already stored in the replacement
instrument cluster.
- Match all vehicle keys Page 01-209
- Enter identification number in vehicle documents.
- Give secret number to customer.
Installing an instrument cluster that has already been used in another vehicle
The engine control module must be matched to the replacement instrument cluster immobilizer.
- Perform adaptation function after changing engine control module Page 01-217.
- Match all vehicle keys Page 01-209.
- Enter identification number in vehicle documents.
- Give secret number to customer.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-217)

Procedure after changing engine control module (Matching)

Notes:
The engine control module is matched to the immobilizer control module in the
instrument cluster. When changing a component it must be re-matched.
If an authorized ignition key is not available but the secret number is, new ignition
keys must be manufactured and matched.
The matching can be interrupted with the "C" button of the VAG 1551
Requirements
Authorized ignition key available.
- Insert old (authorized) key in ignition lock.
- Connect VAG 1551, select operating mode 1, "Rapid data transfer". Switch ignition
on and enter address word 17, "Instrument cluster".
After the control module identification has been displayed:

Indicated on display (example)

- Press button.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-218)

Indicated on display
- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display
- Confirm entry with -Q- button.

Indicated on display
- Press button -0- twice to select "Channel 0".
- Confirm entry with -Q-.

Indicated on display
- Confirm entry with -Q- button.

Indicated on display
- Press button.

Indicated on display
Notes:
When the ignition is next switched "on" the identification of the engine control module is read by
the immobilizer control module and stored.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-219)

Immobilizer, troubleshooting
Requirements
Voltage supply OK.
Diagnostic wire between instrument cluster and VAG1551 OK.
Valid wiring diagram and Repair Manual available.
Malfunction
Engine does not start (when starting, engine runs and stalls after approx. 1 second)
- Connect VAG 1551 and initiate On Board Diagnostic (OBD).
- Select engine control module with address word 01.
- Check DTC memory (function 02).
Possible cause
DTC 17978 -"Engine control module blocked" is stored in DTC memory
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-220)

The immobilizer control module electronics have not released the engine control module!
- Erase DTC memory (function 05) and end output (function 06).
- Select instrument cluster OBD with address word 17.
- Check DTC memory (function 02), evaluate and correct malfunctions using DTC
table Page 01-202.
Notes:
After completing the repairs and matching the immobilizer components it is absolutely necessary
that the engine control module DTC memory is checked and erased.
DTC 17978 "Engine control module blocked" is not stored in DTC memory, this
means:
There is no malfunction of the electronic immobilizer!
- Perform troubleshooting according to instructions in engine repair manual.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-221)

Malfunction
Key matching faulty
DTC 01179 "Key programming faulty" is stored in DTC memory of immobilizer
control module
- Select instrument cluster OBD with address word 17.
- Press button.

Indicated on display (example)

- Compare14-digit identification number shown in display with identification number on
key fob.
- If identification numbers are different, determine appropriate secret number
according to the displayed identification number in display via the responsible
distributor or importer.
- Match all keys with correct secret number.
Malfunction
"Fail" appears in odometer display in instrument cluster and engine does not start
An incorrect secret number has been entered 3 times
Corrective measure
- Perform "Login procedure" function 11 Page 01-210
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-222)

Emergency start function, activating without VAG 1551

Using the emergency start function, a vehicle with a faulty anti-theft immobilizer can be started
and driven under its own power to a VW dealership.
Requirements
Customer must provide proof of authorized vehicle operation/ownership with vehicle
documents and identification
Key tag with covered secret number is available (If not, "Determining secret
number", page 01-215
Mechanically correct key available
- Switch ignition on.
- Twist setting knob for clock (on instrument cluster) clockwise while simultaneously
pressing reset button for trip odometer counter.
In the display for the trip odometer counter "0000" appears and the first digit blinks.
Using the reset button for the trip odometer counter, the first digit can now be moved from "0"
through "9":
- Press reset button for trip odometer counter until valid first digit of secret number is
displayed, e.g. "5"
In the trip odometer counter display "5000" appears.
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-223)

- Twist setting knob for clock.

In the trip odometer counter display "5000" appears and the second digit blinks.
- Press reset button for trip odometer counter until valid second digit of secret number
is displayed, e.g. "3".
- Twist setting knob for clock.
In the trip odometer counter display "5300" appears and the third digit blinks.
- Press reset button for trip odometer counter until valid third digit of secret number is
displayed, e.g. "4".
- Twist setting knob for clock.
In the trip odometer counter display "5340" appears and the fourth digit blinks.
- Press reset button for trip odometer counter until valid fourth digit of secret number
is displayed, e.g. "9".
In the trip odometer counter display "5349" appears (example).
- On instrument cluster, simultaneously twist clock setting knob and press reset button
for trip odometer counter.
If the valid secret number has been input correctly:
trip odometer display is shown again in trip odometer counter
 Volkswagen Jetta, Golf, GTI 1999, 2000
Electrical Equipment On Board Diagnostic (OBD)
Anti - theft immobilizer On Board Diagnostic (OBD) (Page 01-224)

warning light for anti-theft immobilizer stays on

Notes:
Three attempts to input the secret number correctly are possible immediately. The
next three attempts will not be possible for at least 10 minutes if the ignition remains
switched on continuously during this time.
After the secret number has been input incorrectly three times, and the ignition
switched off, the control module is locked. "FAIL" appears in the trip odometer
display counter in the instrument cluster.
The waiting time between each set of attempts doubles each time to a maximum
time of 255 minutes.
If during the input procedure no key/button operation occurs for longer than 30
seconds, the emergency start attempt is interrupted.
- Switch ignition off and then start engine.
The emergency start function is not operable again and must be reactivated if:
5 minutes have elapsed since the ignition was switched off and the ignition key
removed from the ignition lock.
45 minutes have elapsed since the ignition was switched off, but an ignition key
remained inserted in the ignition lock.
Upon beginning an adaptation function with VAG 1551.