Maintenance
CG132, WP 11-2
Maintenance schedule Overview of intervals
For information on the assignment and validity of the maintenance schedule:
see Technical Bulletin (TR) 2167
Maintenance level
Operating hours
E1 E10 E20 E30 E40 E50 E60 E70
as specified x
50 x
1500 x
3000 x
4500 x
6000 x
7500 x
9000 x
10500 x
12000 x
12050 x
13500 x
15000 x
16500 x
18000 x
19500 x
21000 x
22500 x
24000 x
24050 x
25500 x
27000 x
28500 x
30000 x
31500 x
33000 x
34500 x
36000 x
36050 x
37500 x
39000 x
40500 x
42000 x
43500 x
45000 x
46500 x
48000 x
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule Overview of intervals
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E1
Maintenance work Remark As specified CC JC
Clean engine if required 1 B 0-3-6
Lube oil system, complete lube oil according to Technical 1 B 8-1-1
analysis and replace lube oil Bulletin (TR) 2105
Coolant system, complete coolant according to Technical 1 B 9-1-1
analysis and replace coolant Bulletin (TR) 2091
Check engine preservation according to Technical 1
(preservation, application of new Bulletin (TR) 2116
corrosion protection, depreservation)
Maintain crankcase breather (model Complete a control Complete limit value 1 B 3-1-9
UPF) measurement after measurement every 2000
replacing filter inserts OH, at the latest replace
after 16000 OH
Replace intake air filter If the low pressure limit at the latest after 4000 OH 1 B 6-3-6
value is reached, if the filter
surface is damaged
Carry out test run If the engine was not run in Monthly 1 B 0-1-4
operational readiness
within a month
Service the battery If the engine was not run in Monthly 1
operational readiness
within a month
Combustion gas system, sample taking In accordance with every 4 months 1 B 7-18-1
and gas analysis Technical Bulletin (TR)
3017
Check coolant according to Technical every 6 months 1 B 9-1-1
Bulletin (TR) 2091
Replace coolant according to Technical every 24 months 1 B 9-0-4
Bulletin (TR) 2091
Run in the engine After replacing pistons or if required 3 W 0-1-3
cylinder liner
Replace or exchange starter if required 3 W 13-3-2
Exchange exhaust turbocharger, Model TPS 44 - with water every 16000 OH 3 W 6-6-4
standard overhaul cooling system
Exchange exhaust turbocharger, major Model TPS 44 - with water every 64000 OH 3 W 6-6-4
overhaul cooling system
Exchange exhaust turbocharger, Model TPS 48 - without every 12000 OH 3 W 6-6-4
standard overhaul water cooling system
Exchange exhaust turbocharger, major Model TPS 48 - without every 48000 OH 3 W 6-6-4
overhaul water cooling system
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E1
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E10
Maintenance work Remark CC JC
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Inlet and outlet valves, check valve depth Cylinder head mounted 1 B 1-7-10
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E10
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E20
Maintenance work Remark CC JC
Visually inspect system 1 B 0-1-5
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E20
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E30
Maintenance work Remark CC JC
TEM system, complete auxiliary device test 1 B 0-1-6
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Check throttle valve 1 B 7-23-3
Lube oil system, replace lube oil filter 1 B 8-10-4
Check spark plug 1 B 13-5-6
Check ignition timing 3 W 13-5-3
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E30
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E40
Maintenance work Remark CC JC
TEM system, complete auxiliary device test 1 B 0-1-6
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Inlet and outlet valves, check valve depth Cylinder head mounted 1 B 1-7-10
Check throttle valve 1 B 7-23-3
Lube oil system, replace lube oil filter 1 B 8-10-4
Replace spark plug 1 B 13-5-4
Exhaust gas system, check pollutant emissions 3 W 0-1-9
Check ignition timing 3 W 13-5-3
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E40
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E50
Maintenance work Remark CC JC
TEM system, complete auxiliary device test 1 B 0-1-6
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Inlet and outlet valves, check valve depth Cylinder head mounted 1 B 1-7-10
Check throttle valve 1 B 7-23-3
Lube oil system, replace lube oil filter 1 B 8-10-4
Replace spark plug 1 B 13-5-4
Exchange cylinder heads 2 W 1-4-4
Exhaust gas system, check pollutant emissions 3 W 0-1-9
Visually inspect the cylinder liner Cylinder liner installed 3 W 1-4-4
Check engine mount 3 W 3-7-1
Visually inspect exhaust pipe Exhaust pipe dismantled 3 W 6-1-9
Visually inspect mixture cooler Using an endoscope 3 W 6-4-11
Clean gas/air mixer 3 W 7-22-3
Check ignition timing 3 W 13-5-3
Check starter pinion and gear ring on the flywheel 3 W 12-6-4
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E50
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E60
Maintenance work Remark CC JC
TEM system, complete auxiliary device test 1 B 0-1-6
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Inlet and outlet valves, check valve depth Cylinder head mounted 1 B 1-7-10
Check throttle valve 1 B 7-23-3
Lube oil system, replace lube oil filter 1 B 8-10-4
Check rubber expansion joint 1 B 12-3-2
Replace spark plug 1 B 13-5-4
Exchange cylinder heads 2 W 1-4-4
Exhaust gas system, check pollutant emissions 3 W 0-1-9
Check vibration dampers, hose lines and flexible lines 3 W 0-3-4
Crankshaft, check axial clearance 3 W 2-1-4
Check con-rod bushing 3 W 2-3-7
Replace con-rod bearing 3 W 2-5-3
Replace piston (complete) 3 W 2-9-8
Replace viscosity torsional damper 3 W 12-1-4
Replace cylinder liner 3 W 3-3-2
Check engine mount 3 W 3-7-1
Visually inspect valve tappet Valve tappet installed 3 W 4-2-4
Visually inspect camshaft Camshaft installed 3 W 4-5-8
Visually inspect exhaust pipe Exhaust pipe dismantled 3 W 6-1-9
Clean mixture cooler 3 W 6-4-7
Clean gas/air mixer 3 W 7-22-3
Pre-lubrication system, replace flexible lube oil line 3 W 8-4-13
Check electric cabling, cable set plug and sensor system 3 n.v.
Check ignition timing 3 W 13-5-3
Check starter pinion and gear ring on the flywheel 3 W 12-6-4
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E60
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E70
Maintenance work Remark CC JC
TEM system, complete auxiliary device test 1 B 0-1-6
Complete test and functioning run 1 B 0-1-7
Inlet and outlet valves, check valve clearance and set 1 B 1-1-1
Inlet and outlet valves, check valve depth Cylinder head mounted 1 B 1-7-10
Check throttle valve 1 B 7-23-3
Lube oil system, replace lube oil filter 1 B 8-10-4
Replace spark plug 1 B 13-5-4
Exchange cylinder heads 2 W 1-4-4
Exhaust gas system, check pollutant emissions 3 W 0-1-9
Check vibration dampers, hose lines and flexible lines 3 W 0-3-4
Check crankshaft 3 W 2-1-7
Replace crankshaft sealing ring (drive side) 3 W 2-2-2
Replace crankshaft sealing ring (free side) 3 W 2-2-4
Replace con-rod bearing 3 W 2-5-3
Replace con-rods 3 W 2-3-6
Replace main bearing and thrust bearing 3 W 2-7-2
Replace piston (complete) 3 W 2-9-8
Replace viscosity torsional damper 3 W 12-1-4
Replace cylinder liner 3 W 3-3-2
Check engine mount 3 W 3-7-1
Replace valve tappet 3 W 4-2-3
Check and clean valve train (complete) 3 W 4-2-5
Replace camshaft 3 W 4-5-5
Check and clean gear drive 3 W 4-4-15
Speed control, exchange actuator 3 W 5-4-5
Visually inspect exhaust pipe Exhaust pipe dismantled 3 W 6-1-9
Replace exhaust compensators 3 W 6-1-11
Clean mixture cooler 3 W 6-4-7
Overhaul gas/air mixer 3 W 7-22-3
Pre-lubrication system, replace flexible lube oil line 3 W 8-4-13
Lube oil system, replace pressure control valve 3 W 8-11-16
Replace lube oil pump 3 W 8-4-5
Check electric cabling, cable set plug and sensor system 3 n.v.
Replace rubber expansion joint 3 W 12-3-1
Check ignition timing 3 W 13-5-3
Check starter pinion and gear ring on the flywheel 3 W 12-6-4
Replace balance shaft bearing Only V8 engine Q
Camshaft, replace bearing Q W 4-1-1
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
Maintenance
CG132, WP 11-2
Maintenance schedule E70
CG132, WP 11-2_2016-03_en.xlsm 02.03.2016
