Scribd
Upload
66 views1 page

5-Jul-19 Beam - : Material Load Factors

This document provides a design summary for a beam with the following details: - The beam spans 8 meters from grid A to grid B with 3 intermediate supports - The maximum bending moment is 320.87 kNm and maximum shear is 160.44 kN - The deflection is calculated to be 11.78 mm, which is less than the allowable deflection of 33.333 mm - The beam material, loading details, and capacity calculations are provided - All checks show the beam design is satisfactory for shear, moment, and deflection

Uploaded by

Phuc Daominh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

5-Jul-19 Beam - : Material Load Factors

This document provides a design summary for a beam with the following details: - The beam spans 8 meters from grid A to grid B with 3 intermediate supports - The maximum bending moment is 320.87 kNm and maximum shear is 160.44 kN - The deflection is calculated to be 11.78 mm, which is less than the allowable deflection of 33.333 mm - The beam material, loading details, and capacity calculations are provided - All checks show the beam design is satisfactory for shear, moment, and deflection

Uploaded by

Phuc Daominh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project:

Client: Made by Date Page


Location: 5-Jul-19
Subject: Beam Checked Revision Job No
EC3 -

Location Supports from grid A to grid B STATUS : VALID DESIGN


Diagram Type: 4
200
Span (m) 8.00 No. Intermediate restraint: 3.0
Material Load Factors 0
2
fy = 345 N/mm Dead Load 1.35
-200
2
E= 205 kN/mm Imposed Load 1.50
G= 81 kN/mm2 -400

From A A B
LOADING Unit Dead Impose
(m) Bending Moment Diagram (kNm)
SW kN/m 0.54 200
UDL kN/m 12.50 15.00 100
Point Load kN
0
Point Load kN
kN -100
Point Load
Point Load kN -200
Total UDL kN/m 13.0 15.0 A B
Total P kN 0.0 0.0 Shearing Diagram (kN)
Combine Load with factor: UDL = 40.1 kNm 5
P= 0.0 kN 0
MEd, max = 320.87 kNm -5
VEd= 160.44 kN -10
Deflection δmax = 11.78 mm < 1/240 = 33.333 mm -15
Section Type: C-Section3 Z-Section UB-Section A B
UB-Section Deflection Diagram (mm)
Lcr b h tw Tf A Av Wy Wz Iy Iz IT Iw
2 2 3 3 4 4 4
mm mm mm mm mm cm cm cm cm cm cm cm dm6
2000 185.0 600.0 6.0 8.0 69.24 40.1 1104.5 68.721 33136 635.67 12.699 0.5585

Mcr = C1π2EIz/Lz2 [Iw/Iz +Lcr2GIT/(π2EIz)]0.5 = 1319.56 kNm C1 = 1.36

= = 0.48 Buckling curve b α= 0.34

100% 94.5%
= 0.5[1 + ̅ − 0.2 + )= 0.67

= = 0.89 50% 35.3%


20.1%

Capacity Mb,Rd =χWyfy/γM1 = 339.68 kNm 0%


Moment Shear Deflection
VRd=Avfy/(√3γM0 )= 799.13 kN

Check SHEAR MOMENT DEFLECTION GLOBAL


Pu < Pc Mu < M c fmax < fallow STATUS
SATISFIED SATISFIED SATISFIED VALID DESIGN

You might also like