Scribd
Upload
71 views1 page

Keywords: Water-Air Flow, Slug Flow, Fluctuations in Static Pressure and Pressure Drop

Multiphase flow occurs when two or more substances flow through a pipe simultaneously. Slug flow is a type of two-phase flow that receives attention due to its unique behaviors and phenomena. In slug flow through a horizontal pipe, friction occurs between the liquid slug and pipe walls and between phases, causing high pressure fluctuations that can damage pipes and structures. An experiment analyzed slug flow characteristics in a 26 mm diameter pipe by varying water and air superficial velocities and measuring static pressure and pressure differences at points along the pipe. Analysis showed that the presence of slug flow can be detected from high static pressure fluctuations and pressure drops. Increasing superficial velocities led to higher pressure fluctuations, frequencies, and uneven pressure distributions.

Uploaded by

titosinaga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
71 views1 page

Keywords: Water-Air Flow, Slug Flow, Fluctuations in Static Pressure and Pressure Drop

Multiphase flow occurs when two or more substances flow through a pipe simultaneously. Slug flow is a type of two-phase flow that receives attention due to its unique behaviors and phenomena. In slug flow through a horizontal pipe, friction occurs between the liquid slug and pipe walls and between phases, causing high pressure fluctuations that can damage pipes and structures. An experiment analyzed slug flow characteristics in a 26 mm diameter pipe by varying water and air superficial velocities and measuring static pressure and pressure differences at points along the pipe. Analysis showed that the presence of slug flow can be detected from high static pressure fluctuations and pressure drops. Increasing superficial velocities led to higher pressure fluctuations, frequencies, and uneven pressure distributions.

Uploaded by

titosinaga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

ABSTRACT

Multiphase flow is a flow through a pipe or channel where the flow in two or more phases of the
substances that flow. Two phases flow is mostly found in a variety of industrial applications, among others
in the transportation of petroleum which consists of fluid in the pipeline, power generation, heat exchanger,
the process in the chemical industry, oil, nuclear reactors, the system refrigeration, and so forth. Slug flow
is one type of two-phase flow that gets more attention because it has some unique behaviors and phenomena
which resulted in many losses. In the slug flow pattern in a horizontal pipe, the friction between the liquid
slug includes friction with the pipe top, liquid slug with the bottom of the pipe and slip between phases.
This friction causes the fluctuation of local pressure differences are so high that resonance occurs. The
presence of cavitation also result in corrosion rate will be higher. In addition, this slug flow can also cause
damage to pipes and structures as a result of the momentum generated speed.
The existence of slug flow needs to be avoided and controlled to prevent damage to the pipe. To
determine the characteristics of slug flow used important parameters such as the superficial velocity, static
pressure, pressure difference fluctuation, pressure gradient, and frequency slug. Observations were made
on the pipe diameter of 26 mm with a variation of the superficial velocity of the water and the air superficial
velocity variations. Then analyzed the data to determine the flow characteristics slug with the measurement
of static pressure and fluctuations in the pressure difference using a pressure transducer which is placed at
the point 180D and 210D and using Easysense 2250 - Validyne software with data retrieval 500 of data per
second for 120 seconds and then analyzed with a Probability Distribution Function (PDF) and Power
Spectral Density (PSD).
From the data analysis, the presence of slug flow can be detected with static pressure fluctuations
and pressure drops are very high. An increase in the superficial velocity of air and water causes the
superficial velocity fluctuations in the value of the pressure, the pressure fluctuation frequency and
distribution will be high. Pressure gradient slug flow in this experiment can also be predicted by either using
empirical correlations.

Keywords: water-air flow, slug flow, fluctuations in static pressure and pressure drop

You might also like