Black Cat
Ripper & Scarifier
Teeth, Shanks & Protectors
www.BlackCatBlades.com
[email protected] Toll Free: 1.800.661.6666 Ph: 780.465.6666 Fax: 780.465.9595
Black Cat Direct Replacement Ripper & Scarifier parts are manufactured using our HighSpec Alloy steel and heat treated
to precise specifications. Computer design and analysis is employed in the development stages to ensure proper fitment
and optimum strength for every part. Efficient processes and “state of the art” foundry practices allow for competitive
pricing of quality parts. In house metallurgical staff and testing facilities ensure quality and consistency in all of our finished
products. The results are quality wear parts that offer value to the customer every time.
250.0215 TEETH & ADAPTERS
Caterpillar® and other identities and/or trademarks referred to in this publication are the registered marks of the entities noted herein. The use of any trademarks of others than Black Cat
Blades Ltd. are solely and exclusively for identification, informational, comparative, and descriptive purposes. Black Cat Blades Ltd. is not affiliated with any owner of such registered marks and
does not make, use, or sell any products manufactured by any such entity identified in this publication.
A
B C
9W4552 198-78-21340 395R18B
Black Cat Ripper Teeth for Caterpillar® Applications
Part Number Description Weight Model or Family A B C
6Y0309 R300 Penetration 12.3 lbs D5M, N, 160H, 163, 14, 140, 143H, 12 4.19” 3.31” 11.50”
6Y0359 R350 Penetration 28.0 lbs D7R, D6K, M, N, D5M, N, 24H, 16, 160H, 5.81” 4.75” 14.13”
6Y0352 R350 Centerline 26.0 lbs 163, 14, 140, 143H, 130, 12 5.82” 4.73” 14.00”
4T5451 R450 Penetration - Short 36.0 lbs 6.83” 5.58” 12.86”
4T5452 R450 Penetration - Intermediate 41.0 lbs 6.81” 5.63” 15.63”
9W2451 R450 Centerline - Short 40.6 lbs D9H, N, R, T, D8N, K, L, R, T 6.77” 5.63” 12.88”
9W2452 R450 Centerline - Intermediate 49.0 lbs 6.75” 5.63” 15.00”
1140453 R450 Centerline - Long 55.0 lbs 6.77” 5.63” 16.65”
4T5501 R500 Penetration - Short 54.9 lbs 8.60” 6.16” 15.00”
4T5502 R500 Penetration - Intermediate 67.0 lbs 9.25” 6.50” 16.75”
4T5503 R500 Penetration - Long 67.0 lbs 9.25” 6.44” 18.50”
D11N, R, D10N, R, T, D9L, R, T,
4T4501 R500 Centerline - Short 54.9 lbs 8.62” 6.17” 14.76”
4T4502 R500 Centerline - Intermediate 59.4 lbs 8.60” 6.16” 16.50”
8E8503 R500 Centerline - Long 75.0 lbs 9.24” 6.49” 19.00”
6Y3552 R550 Penetration - Intermediate 103.0 lbs 10.93” 6.84” 21.25”
9W4551 R550 Centerline - Short 93.0 lbs D11N, R 11.15” 7.36” 17.63”
9W4552 R550 Centerline - Intermediate 108.0 lbs 11.15” 7.36” 21.25”
Ripper Teeth for Komatsu® Applications
Part Number Description Weight Model or Family A B C
141-78-11253 Non-Centerline 25.8 lbs D60, D61, D65, D75 6.41” 4.81” 11.00”
175-78-31230 Centerline 31.5 lbs D85, D135, D150, D155 6.71” 4.75” 13.19”
195-78-21331 Centerline 35.7 lbs D275, D355 7.71” 4.88” 14.50”
195-78-71320 Non-Centerline 54.7 lbs 8.47” 5.12” 16.50”
D375
195-78-71350 Centerline 56.4 lbs 8.14” 5.00” 18.50”
198-78-21340 Non-Centerline 83.6 lbs 9.86” 6.08” 20.08”
D475
198-78-21370 Centerline 79.5 lbs 9.45” 6.13” 17.50”
19M-78-11341 Centerline 87.2 lbs D575 9.61” 7.74” 19.53”
Ripper Teeth for Esco® Applications
Part Number Description Weight Model or Family A B C
22R10 Non-Centerline Rib 8.5 lbs Esco 22R Rippers
®
3.64” 3.35” 10.66”
25R12 Non-Centerline Rib 13.7 lbs Esco® 25R Rippers 4.48” 3.83” 12.05”
35-R15 Non-Centerline 32.1 lbs Esco 35-5R Rippers
®
6.51” 4.92” 15.50”
39-5R18B Non-Centerline Rib 48.8 lbs Esco 39-5R Rippers
®
7.53” 6.12” 18.12”
Scarifier Tips
Part Number Description Weight Model or Family A B C
6Y5230 Grader Scarifier 3.4 lbs 1.44” 1.91” 7.13”
Replaces 2D5572
6Y5230LP Long Scarifier 3.8 lbs 1.90” 1.87” 8.50”
9937 Ripper Tooth 7.3 lbs All Champion and Volvo Graders
® ®
0.06” 3.66” 8.98”
Ripper / Scarifier Shank
9F5124
T211749 C A
Scarifier Shanks
Part Number Description Weight Model or Family A B C
101 Scarifier Shank 12.6 lbs Universal 1.00” 3.00” 17.25”
104 Scarifier Shank 14.5 lbs Universal 1.00” 3.00” 20.00”
5B6251 Scarifier Shank 9.5 lbs Rear Notch 1.00” 2.50” 15.13”
9F5124 Scarifier Shank 12.6 lbs Front Notch 1.00” 3.00” 17.25”
9F5124BS Scarifier Shank 12.6 lbs Rear Notch 1.00” 3.00” 17.25”
8110 Scarifier Shank 13.9 lbs Front Notch 0.94” 3.00” 16.94”
H920-23 Scarifier Shank 6.6 lbs Front Notch 0.72” 2.50” 13.56”
5K1459 Scarifier Pin 0.6 lbs Universal 0.69” 1.00” 4.50”
Ripper Shanks
Part Number Weight Model or Family A B C Hole Size
9J6586 63.7 lbs D4, D5, 12, 120, 130, 14, 140, 16, 160 2.25” 5.38” 21.34” 1.87”
1380797 (9J3139) 122.6 lbs D5, D6, D7, 24H 2.92” 6.87” 28.40” 2.16”
T211749 77.8 lbs 450J, 550J, 650J, 670, 672, 770, 772, 870, 872 2.25” 5.38” 24.39” 1.87”
9934 64.8 lbs Champion /Volvo graders
® ®
1.77” 8.55” 23.51” 1.61”
Repair Parts
A C D
B
25RWN 8E7350 103 8114
Ripper Repair Parts
Part Number Description Weight Model or Family A B C D Holes
8E7300 R300 Replacement Nose 6.0 lbs D4, D5, 12, 120, 130, 14, 140, 16, 160 3.44” 5.31” 2.00” 2.19” 1
8E7350 R350 Replacement Nose 12.0 lbs D5, D6, D7, 24H 4.44” 6.63” 2.63” 2.94” 1
8E8418 R450 Quarter Shank 156.0 lbs 12.75” 17.42” 2.98” 3.24” 3
D8,D9
9U9694 R450 Replacement Nose 43.0 lbs 8.00” 12.25” 2.94” 2.88” 2
103 8115 R500 Quarter Shank 167.0 lbs 12.61” 20.47” 3.06” 3.94” 2
103 8114 R500 Replacement Nose 97.0 lbs D9, D10, D11 10.56” 17.44” 3.06” 3.94” 2
107 3361 R500 Replacement Nose 96.0 lbs 11.06” 15.13” 3.06” 3.94” 2
104 9279 R550 Quarter Shank 276.0 lbs D11 16.26” 24.03” 3.31” 4.38” 2
22RN Replacement Nose 13.1 lbs Esco 22R Rippers
®
5.79” 6.72” 1.51” 3.06” 1
25RWN Replacement Nose 18.1 lbs Esco 25R Rippers
®
6.00” 7.44” 1.76” 3.58” 1
35-5RWN Replacement Nose 44.1 lbs Esco® 35-5R Rippers 8.63” 10.35” 2.26” 4.78” 1
39-5RWN Replacement Nose 58.8 lbs Esco 39-5R Rippers
®
9.69” 3.14” 2.38” 5.02” 1
B
A
9N4621 132 4716 138 0796 195-78-71110
Black Cat Ripper Shank Protectors for Caterpillar® Applications
Part Number Description Weight Model or Family A B C D
138 0796 R350 1 Pin Standard Protector 21.0 lbs D5, D6, D7, 24H - 12.75” 4.30” 3.05”
8E1848 R450 2 Pin Sharp Protector 56.0 lbs 12.25” 19.13” 5.00” 3.25”
132 4716 R450 2 Pin Standard Protector - Extended 54.0 lbs 12.31” 27.11” 4.88” 3.19”
D8/D9
6J8814EXT R450 2 Pin Standard Protector - Extended 51.0 lbs 12.25” 23.00” 4.75” 3.13’
6J8814 R450 2 Pin Standard Protector 27.0 lbs 12.25” 17.00” 4.25” 3.13”
9W8365EXT R500 2 Pin Sharp Protector - Extended 101.0 lbs 16.00” 34.38” 5.75” 3.63”
D9/D10
1U3644 R500 1 Pin Standard Protector 90.0 lbs - 29.00” 5.25” 4.13”
132 1015 R500 2 Pin Sharp Protector - Extended 185.0 lbs 15.62” 34.25” 6.50” 4.38”
D10/D11
6Y8960 R500 2 Pin Sharp Protector 40.0 lbs 15.62” 22.06” 5.50” 4.38”
132 1016 R550 2 Pin Sharp Protector - Extended 241.0 lbs 23.16” 36.60” 7.19” 4.75”
D11
9N4621 R550 2 Pin Sharp Protector 157.0 lbs 23.24” 28.77” 6.31” 4.75”
Ripper Shank Protectors for Komatsu® Applications
Part Number Description Weight Model or Family A B C D
195-78-21320 2 Pin Standard Protector 31.0 lbs 13.56” 16.56” 4.50” 3.13”
D155, D275, D355
195-78-21580 2 Pin Standard Protector - Extended 50.0 lbs 13.56” 27.25” 4.50” 3.13”
195-78-71110 2 Pin Standard Protector 69.0 lbs 18.38” 21.48” 5.20” 3.25”
D375
195-78-72410 2 Pin Standard Protector - Extended 101.0 lbs 18.38” 33.72” 5.50” 3.25”
198-78-21330 2 Pin Standard Protector 100.0 lbs 16.75” 21.53” 5.75” 4.20”
D475
198-78-21390 2 Pin Standard Protector - Extended 140.0 lbs 16.75” 35.36” 5.75” 4.20”
Distributed By:
www.BlackCatBlades.com
Caterpillar® and other identities and/or trademarks referred to in this publication are
the registered marks of the entities noted herein. The use of any trademarks of others
than Black Cat Blades Ltd. are solely and exclusively for identification, informational,
comparative, and descriptive purposes. Black Cat Blades Ltd. is not affiliated with
any owner of such registered marks and does not make, use, or sell any products
manufactured by any such entity identified in this publication.
