TRUCK CRANE

GT-750ER GT-600ER
75 METRIC TON CAPACITY 60 METRIC TON CAPACITY

GT-300ER
30 METRIC TON CAPACITY

GT-750ER

GT-600ER

GT-300ER

Photo: Optional model

/ 300ER
:
/ 600ER
T-750ER
Photo: Optional model
TADANO LTD. (International Sales Division)

T he G
d Of
re Prou
4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, Japan

W e A
uality
Phone: +81-3-3621-7750 Fax: +81-3-3621-7785

High Q
http://www.tadano.com/ E-mail: [email protected]

GT-750ER/600ER/300ER-3-E-18-3-01-86-552-A
Printed in Japan
 The GT-750ER/600ER/300ER redefines
what truck cranes should be by
offering enhanced safety and
performance in all crane operations.
The newly designed carrier also boasts
refined performance, enabling it to
withstand even the harshest running
test conditions.
Tadano has utilized years of development
experience to craft this cutting-edge,
Japanese-manufactured truck crane.

State-of-the-Art Truck Cranes Crafted in Japan

CONTENTS
Carrier
Two-person, full-width cabin 03
High performance engine
Automatic mechanical transmission
Cruise control
New suspensions for the carrier
Test drive for new truck crane

Crane
Rounded construction boom 05
GT-750ER GT-600ER GT-300ER Two telescoping modes [Ⅰ] & [Ⅱ]
Two winches with cable follower
Crane capacity: 75,000 kg Crane capacity: 60,000 kg Crane capacity: 30,000 kg Operator Comfort
Under slung jib
5-section long boom: 47.0 m 5-section long boom: 43.0 m 4-section long boom: 34.0 m Automatic moment limiter [AML-C] 07
Control of asymmetric extension width of outriggers
2-staged jib: 9.0 m/ 14.3 m 2-staged jib: 9.0 m/ 14.3 m 2-staged jib: 8.5 m/14.0 m Smart Chart system
Maximum lifting height: 47.3 m (Boom) Maximum lifting height: 43.4 m (Boom) Maximum lifting height: 34.0 m (Boom) HELLO-NET
Reduce fuel consumption
61.2 m (Jib) 57.3 m (Jib) 48.0 m (Jib)
WORKING RANGE & DIMENSIONS 09
Maximum load radius: 40.0 m (Boom) Maximum load radius: 34.0 m (Boom) Maximum load radius: 32.0 m (Boom) COUNTERWEIGHT (GT-750EL)
48.0 m (Jib) 44.0 m (Jib) 40.0 m (Jib) OPTIONAL ITEMS

01 Photo: Optional model 02

 Carrier

GT-750ER GT-600ER GT-300ER

Overall length: approx. 14,180 mm Overall length: approx. 13,140 mm Overall length: approx. 12,620 mm
Overall width: approx. 2,800 mm Overall width: approx. 2,800 mm Overall width: approx. 2,550 mm
Overall height: approx. 3,740 mm Overall height: approx. 3,780 mm Overall height: approx. 3,800 mm
Max. traveling speed: 85 km/h Max. traveling speed: 85 km/h Max. traveling speed: 85 km/h
Photo: Optional model

The carrier has been newly designed, right down to the suspension, to pass long and New suspensions for the carrier
rigorous road tests in a variety of environments and substantially improve crane mobility. Front: The ride quality has been optimized to ensure the driver's comfort
Reyco leaf-type suspensions *GT-750ER, GT-600ER and protect the carrier.
The cabin has also been remodeled with features that contribute to comfortable
Sachs shock absorbors
and safe driving, such as automatic mechanical transmission.
Improved ride comfort and operability.

Automatic/Manual Push forward

Push to the left Shifts up a gear.
Switches between Switches to manual
automatic and manual when driving
(switchable at all times). in automatic.

Pull backward Shift lever

Shifts down a gear.
Switches
to manual when Push once to the right
driving in automatic. Changes the shift
position according
to your speed
when driving in manual. Rear:
Rubber suspension mounts
Featuring rubber suspension co-developed
Two-person, full-width cabin Gearshift switch
with Hendrickson
The full-sized cabin accommodates two passengers, Extreme durability proven in the harshest environments.
allows comfortable traveling for the operator. Automatic mechanical transmission Improved ride comfort and maintainability.
Cruise control
A system that automatically controls
the speed of the carrier High-speed driving and durability performance tests
High performance engine [EUROⅢ] for the new truck crane
∙ Maximum speed test
∙ Road-holding ability test
Daimler OM457LA *GT-750ER, GT-600ER Daimler OM926LA *GT-300ER
∙ ABS test
4-cycle, turbo charged and 4-cycle, turbo charged and
∙ Brake performance test
after cooled after cooled
∙ Road driving durability test:
Max. output: 260 kW {353 PS} Max. output: 240 kW {326 PS}
15,000km
Max. torque: 1,850 Nm {188 kgf-m} Max. torque: 1,300 Nm {132 kgf-m}

03 04
 Crane
The rounded boom is made of high tensile steel which decreases
its weight while increasing its strength to realize smooth
and powerful crane operation, while the high-performance Two telescoping modes [Ⅰ] & [Ⅱ] *GT-750ER, GT-600ER
AML-C assists with safe and comfortable operation. The operator can select either of the two boom telescoping
In addition, the newly developed Smart Chart expands workability modes based on the designated job plan. This provides
into whole new areas to improve operation efficiency. enhanced crane capabilities in accordance with work needs.

5°
25° Rounded construction
boom
5° The rounded boom

45° 25° constructed of high tensile steel

contributes to decreased
boom weight and increased Mode [Ⅰ] Mode [Ⅱ]
boom strength. Mode [Ⅰ] is extension of 2nd section Mode [Ⅱ] is synchronized extension
45° only. Then synchronized extension of 3rd, 4th and 5th sections. Then
of 3rd, 4th and 5th sections. 2nd section independently.

5° Two winches
with cable follower
25° Both the main winch and the auxiliary
winch have powerful line pull
45° (GT-750ER: 5.6-ton, GT-600ER/300ER: 4.5-ton)
and operate at high speeds for increased
work efficiency.

Operator Comfort
The crane cabin provides improved
livability and offers the operator
a comfortable working environment.

The crane operating

levers are of finger
control type and
surely and steadily
respond to the operator.

GT-750ER GT-600ER GT-300ER

Crane capacity: 75,000 kg Crane capacity: 60,000 kg Crane capacity: 30,000 kg
5-section long boom: 47.0 m 5-section long boom: 43.0 m 4-section long boom: 34.0 m
2-staged jib: 9.0 m/ 14.3 m 2-staged jib: 9.0 m/ 14.3 m 2-staged jib: 8.5 m/14.0 m
Maximum lifting height: 47.3 m (Boom) Maximum lifting height: 43.4 m (Boom) Maximum lifting height: 34.0 m (Boom) Under slung jib
(Side up type: GT-750ER, GT-600ER)
61.2 m (Jib) 57.3 m (Jib) 48.0 m (Jib)
A two-stage, side up jib
Maximum load radius: 40.0 m (Boom) Maximum load radius: 34.0 m (Boom) Maximum load radius: 32.0 m (Boom)
makes installation in narrow
48.0 m (Jib) 44.0 m (Jib) 40.0 m (Jib)
spaces possible.

Jib installation

Minimum extension (2.51 m) Minimum extension (2.51 m) Minimum extension (2.18 m)

Middle 1 extension (4.7 m) Middle 1 extension (4.7 m) Middle 1 extension (4.1 m)
Middle 2 extension (6.5 m) Middle 2 extension (6.5 m) Middle 2 extension (5.8 m)
Maximum extension (7.0 m) Maximum extension (7.0 m) Maximum extension (6.2 m)
Photo: Optional model

05 06
 Automatic moment limiter [AML-C]
Tadano’s new AML-C is easy to use. It allows the operator to
simultaneously monitor: boom angle, boom length, operating pressure
Smart Chart system *GT-750ER, GT-600ER

of the elevating cylinder, the extension width of outriggers, The newly developed Smart Chart expands the working area, allowing you to get
slewing position, rated lifting capacity and present hook load. the best crane performance in any outrigger extension setup.
All of this enables the AML-C to move easily through lifting capacity
changes without changing configurations and codes to make a lift. 30 m 20 m 10 m 0m 10 m 20 m 30 m Performance comparison graph (GT-600ER)
[Slewing range: 125 to 145 degrees]
The AML-C provides both audio and visual warnings when a condition 30 m
9.00
exists that will overload the crane and automatically employs our slow
stop function to avoid shock loads. 6.75
20 m

Load lifting ( t )
The AML-C with “OPERATOR” pre-set working range
4.50
limits and automatic slow stop functions will assist
the operator to deliver safe smooth operations. 10 m 2.25

0.00
0 10 20 30 40
AML lamp
0m Load radius (m) Smart Chart
Conventional control

An example of effects with the Smart Chart

Control of asymmetric extension width of outriggers A
10 m (Comparison with conventional control)
When operating the crane with the asymmetric outriggers extended, the AML-C 6t Load radius 31.4 m → 34 m
E
detects the extension width of all of the crane's outriggers (front, rear, left and right)
to measure maximum work capacity in each area. F 3t 20 m
Approx. 8 .3 ％ expansion
When slewing the boom from the longer outrigger area to the shorter outrigger area, Load lifting capacity 0.7 t → 1.01 t
G
the AML-C detects the motion and displays the maximum capacity according to
the extension width of each of the outriggers, and brings the motion to a slow stop
H
1t
30 m Approx. 44 .3 ％ expansion
before it reaches the maximum capacity. C D

Regardless of operator awareness, the AML-C's slow stop function will help to minimize
any safety risk.
Outrigger Maximum extension
Smart Chart creates
B
O/R MIN a new working area for you
O/R MID
Tadano's new Smart Chart taps into a crane's full potential
O/R MID
O/R MAX by expanding the rear part of the conventional circular work area
A: Over-front B: Over-rear
into a square for increased load radius when the outriggers are
C: Over-side D: Over-side extended to improve safety and efficiency.
E: Rated Load [ O/R MAX ]
F: Rated Load [ O/R MID ]
G: Rated Load [ O/R MID ]
Outrigger Middle extension H: Rated Load [ O/R MIN ]
SLOW STOP !

HELLO-NET Reduce fuel consumption

The HELLO-NET System is used to
monitor crane activity straight from your
Positive Control System
computer or mobile device.
Satellite
communications
The system effectively controls the quantity of hydraulic
Down
You have the ability to view work history,
pump discharge at the time of crane operation
Fuel consumption
Down max.

35 %
GPS
in response to the amount of movement applied by max.

15 %
machine position data and maintenance Owner Service TADANO CO2 emissions
the operating lever.
information. [Compared with GT-600EX]

HELLO-NET provides advanced customer

support between the owners' site
Ground Eco Mode System
Work site station The system controls the maximum engine GT-750ER GT-600ER
and TADANO Group. speed during crane operation. * The above figures differ according to the type of a crane used and its operating conditions.
Eco mode switch

Note: HELLO-NET availability varies by situation. For detail, please contact your distributor or our sales staff in charge.

07 08
 GT-750ER
COUNTERWEIGHT GT-750ER: Mass... 7.7 t
WORKING RANGE
45
25° ° Fixed counterweight: Mass... 4.0 t
5°
47.0 m
+ 14.3 m 66 Self-Removable counterweight: Mass... 1.0 t
64
47.0 m 62 Self-Removable counterweight: Mass... 2.7 t

2.2
+ 9.0 m

2.1
60

2.0
1.9
58
Self-Removable counterweight

1.8
1.7
3.5
56 56

1 .6
3.2
3.0

1.6
54 54

2.8
Counterweight is hydraulically mounting/dismounting; in addition,

1.5
2.6
81°
81°

47.0 m 52 47.0 m 52

2.4

1.4
2 .3
dismounted counterweights can be lifted and moved for transport without a helper crane,

2
50 50

1.
70°

70°

2.2
Counterweight

9
0.
48 48

1.8
42.6 m
8.0

mounting/dismounting switch
as well as being re-mounted at a work site for operation.

7
7.7

0.
46 46

1.
6.9

°
5
0.
60

60
5.7

2
1.
44 44
4.7
9.5

38.3 m

9
8.7

0.
3.9

42 42
8.0

3.1

6
7.1

0.
°

°
50

50
40 40
5
13.8

6.3

4
0.
12.2

2.
5.2
10.8

38 38
2.
4.2
8.7

Lifting Height (m)

Lifting Height (m)
6
7.0

36 36
1.
5
3.

° °
5.8

2
29.5 m 1. 40 40
9

34 34
2.
5.2

9
0.
4

32 32
7

2.
4.
18.2

9
18.2

1.
9

0.6 30 30
14.6

3.

3
.3

3. 6 28 28
1.
11

° °
30 30
9.0

2.8 26 26
9

20.8 m 1.2
7.

24 24
7

2.3
6.
26.6
26.6

5 22 22
5. 1.0
.9

16.4 m
20

4.6 2.0 20 20
.5

20° 20°
17
40.8

18 18
.0
.4

0.7
13

12.0 m
35

.0 3.8 16 16
.0

10 1.7
23
70.0

.2 14 14
15
.5

7.9
52

3.2 12 12
.2

.8 10°
10 10°
36

.8 0.6 10 10
23
6.4 1.4 8 8
19.2
8.0 6 6
4 4
0° 2 0° 2
0 0

OPTIONAL ITEMS
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
Axis of rotation Axis of rotation Load Radius (m)
Load Radius (m)

Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.

DIMENSIONS (mm)

60
R3,9
2,800

2,510
MIN.

Search light *GT-600ER, GT-750ER Wind speed indicator Beacon lamp

MID1.
4,700

2,079
NID2.
6,500

7,000
MAX.
290

450
5,580

MIN.: 12,000–MAX.: 47,000

2,200 Winch drum camera and monitor External lamp (AML) LED
3,740

17.5°

12.7°
270

200

89
Rear view camera（monitor: standard)
2,360 3,320 2,680 2,900
2,400 1,498 3,991 1,422 1,889 615
Side marker lamp
2,365 11,200
14,180
• ABS • Spark arrester(Euro3) • 400 L fuel tank • Rear fog lamp • Spare tire and bracket • Stepladder(capacity 100 kg)

*Some specifications are subject to change

09 10
 GT-600ER GT-300ER
WORKING RANGE WORKING RANGE

45
25° °
5°
43.0 m +
14.3 m 62 45
25° °
60
58 5°
43.0 m +

2.4
2.3
9.0 m

2.1
56 56 56 56

2.0
1.9
54 54 54 34.0 m 54

1.8
+ 14.0 m

4.0

1.7
52 52

3.6
52 52

3.4

1.6

81°
81°

3.1
50 50 50 50

81°

1.3
2.9
2.7

1.6
1.0
48 34.0 m

70°
70°

43.0 m 48 43.0 m 48 48

1.5
+ 8.5 m

2.2

1.4
8
0.
70°
46

1.7
46

1.4
46 46

1.3
1.3

0.

°
°
39.0 m 44 39.0 m 44 44 44

1.2
60
60
9.0

3.0
4
0
8.1

0.

2.8
1.
°

1.1
6.4

42

60
42 42 42

2.7
7
5.1

1.0
0.

2.5
10.0

4 .2

40
10.0

35.0 m 40 35.0 m 40 40

2.4
81°

0
5

°
°

1.
3.4

0.
34.0 m 34.0 m

50
50
8.8

2.2
38 38

9
2.7

38
7.0

38

0.
70°
50

1.8
Lifting Height (m)
5 .7
14.0

36 36

8
36 36
2.

1.4
11.1

0.
4.7

Lifting Height (m)

Lifting Height (m)

7.2
30.0 m 30.0 m

°
9.2

6
3.8

7.2
° 0.

60
°

2
34
1.

34 34 34
40 40

1.
5.8
7.7

Lifting Height (m)

0°
0

9
4.6
3.

1.
6.3

32 32 4

0.
27.0 m 27.0 m 4 32 0. 32

9.5
9
0.
4

3.7
5.1

26.1 m

°
26.1 m 7

9.4
2.

0.

50
30

7.7
30 30 30

2.9
9
1. 0.3
1

6
22.0

0.

6.0
4.

0.5

3
28 28 28
16.3

12.4
28

4.7

2.
4

5 ° ° °
1.

10.9
8

3.

0 22.1 m 30 22.1 m 40
12.

9
3.7
8 26 ° 26 26 26
.1

2. 30

1.
8.0
0.3
10

1.2

2.9
5

13.0

6.2
24 1.
8.0

19.0 m 3 24 19.0 m 24 24
2. 18.2 m 18.2 m

4.7
11.3

3
2

22 22

2.
22 22
1.2
6.

0.9 °
30
32.0

7
8.3
9 9

3.
. . 9 1.

18.0
5

4 1 20 20 20 20
26.

15.0 m 20°
15.0 m
20°

5
9

2
14.2 m 2. 14.2 m

6.
15.
.6

4.0 18 20° 18 0.9 18

19

18

.2
1.5

7
0.6
.1

11

4.
.5
40.8

2.3
14

1 16 16 16 16

5
.1

18.0
3.6
.2

11.0 m 11.0 m

8.
10 3.2 10.3 m 10.3 m
28

.4
1
14 14 6. 0.7 14 14

15
.7

1.2
60.0

.5 1.8
18

.1
7

23 .0
12 12 12 12
.2

.3

11
2.8

30
12

.4
4.6
42

. 5 1 .2 1 0 ° 10° 10°
28 2.6 10 10 8.3 10 10
.1
5.8 8 8 15 8 8
8.3
19.5
6 6 3.5 2.3 1.5 1.0 0.6 6 6
10.9 5.9
15.6 4 4 4 4
0° 2 0° 2 0° 2 2
0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
Axis of Rotation Axis of rotation Axis of rotation Axis of rotation
Load Radius (m) Load Radius (m) Load Radius (m) Load Radius (m)

Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice. Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.

DIMENSIONS (mm) DIMENSIONS (mm)

0
,64
R3
5
,29
R3
2,800

2,550
2,510
MIN.

2,180
MIN.
MID1.
4,700

MID1.
4,100
2,079 1,859

MID2.
5,800
MID2.
6,500

6,200
MAX.
7,000
MAX.

300
400
5,400
290

450
5,580

MIN.: 11,000–MAX.: 43,000

MIN.: 10,300–MAX.: 34,0
1,800 00

1,350

(3,810@Tire: 315/80R22.5)
3,780

3,800

16.4°
(16.9°)
18°

(11.7°)
11.4°
13.5°

(307)

(207)
285

295

195
205

89 2,092
2,308 3,320 2,680 2,900 300
(2,072@Tire: 315/80R22.5)
2,900 3,100 2,300
1,730 2,400 1,498 3,991 1,422 1,889 210
1,565 2,400 4,389 1,422 2,389 455
11,200
10,600
13,140 12,620

*Some specifications are subject to change *Some specifications are subject to change

11 12