Scribd
Upload
95 views

Gravis Ultrasound - Installing Your Memory Upgrade

Gravis Ultrasound - Installing Your Memory Upgrade PC computer manual

Uploaded by

Thea_Vatar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
95 views

Gravis Ultrasound - Installing Your Memory Upgrade

Gravis Ultrasound - Installing Your Memory Upgrade PC computer manual

Uploaded by

Thea_Vatar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
ULTRASOUND The memory chip included in this package is a 40-pin, 256K x 16, SO}, surface mount DRAM (80 nsec). All you need ro do to upgrade your UltraSound from 512K to | MB is to install this chip. Installing Memory Caution! Tarn off your computer and ground yourself by touching the computer's metal chassis to avoid damaging your card, the memory chip, or computer with static charges 1, Remove the UltraSound card. The memory socket is located on the UleraSound card at the far end from the metal bracket. Notice that one comer of the memory socket is beveled (angled ~ see figure at right). This corner is labeled Pin 1 You will also notice that your memory chip has an arrow pointing co its Pin 1 Installing Your Memory Upgrade memory chip itop view! “6-b AD-pn Memory chip ide view) beveled ses ‘anchup Pin 1 Bone Pint ‘Memory socket on cara Place the chip into the open socket on the UleraSound card, ‘matching the arrows. Make sure that the label on top of the chip is facing as shown, Press firmly uncil all of che pins are secure in the socket, and the op of the chip is flush with the top of the socket Thstaled memory Caution! Before you turn on your computer, double check that you have installed the chip correctly. Ifyou installa chip backwards, it will eat up and may cause damage to your UliraSound card o other components in your computer. Testing the Installation When you install your memory upgrade, UltaSound automatically detects the amount of memory installed. To test the installation 1. Reinstall che UleraSound card. Refer to your Installation Guide. 2. From your UleraSound directory, type: SETGUS -i, This runs the UltraSound Setup program. “hoose Advanced, then Diagnos- 3. In the Diagnostics section of the Setup program, select Check DRAM co test your UltraSound’s 4. When the memory est is finished, press to leave the program, Technical Support Technical support is available co all owners of Advanced Gravis products. If you need help installing your memory upgrade, you can call Gravis Technical Support from 8:30 AM ~ 4:00 PM Pacific Coast Time. Telephone: (604) 431-1807 Fax: (604) 451-9358 You can contact Advanced Gravis by modem at the following addresses CompuServe®: GO PCVENB area #14 Advanced Gravis BBS: (604) 431-5927 (V32bis NBL) (604) 431-7553 (28.8 V.FC N81) Internet: [email protected] FidoNET: 1:153/978 FIP: archive.cpas.atoronto.ca pub/pefultrasound Internet Mail List: [email protected] subseribe AOL (America On-line): email Adv C 0 keyword Gravis When contacting Gravis via electronic mail, ic is importane that you provide all the information described in the next section. Otherwise it will take longer to get back to you with an ‘Technical Support Tips 1. Call fiom a phone where you have access to your computer. Please prepace the following information: + Your name, address, and telephor number + The make and model of your computer + Your system software and version + A detailed explanation of the problem Achwwced CRAVIS Pare No. 920-000-000

You might also like