Scribd
Upload
229 views6 pages

Design of Superpassage (Ch. 75.377)

This document summarizes the design of a superpassage bridge. Key details include: 1) The bridge span is 17m with a concrete density of 2500 kg/m3. Reinforcement includes M35 and Fe 550 steel. 2) Calculations show the total weight is 2272.88 kg/m requiring 48.98 cm2 of reinforcement steel. Shear capacity is sufficient without additional reinforcement. 3) Slab design includes a effective depth of 0.245m. Total load is 1725 kg/m requiring 0.63 cm2 reinforcement spaced at 150mm. End moments require 1.25 cm2 reinforcement at 150mm spacing.

Uploaded by

Sumit Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
229 views6 pages

Design of Superpassage (Ch. 75.377)

This document summarizes the design of a superpassage bridge. Key details include: 1) The bridge span is 17m with a concrete density of 2500 kg/m3. Reinforcement includes M35 and Fe 550 steel. 2) Calculations show the total weight is 2272.88 kg/m requiring 48.98 cm2 of reinforcement steel. Shear capacity is sufficient without additional reinforcement. 3) Slab design includes a effective depth of 0.245m. Total load is 1725 kg/m requiring 0.63 cm2 reinforcement spaced at 150mm. End moments require 1.25 cm2 reinforcement at 150mm spacing.

Uploaded by

Sumit Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Design of Superpassage (Ch. 75.

377)

Span 17 m
c-c Span 16.25 m
Density of Concrete 2500 kg/m3
Density of Flood Water 1100 kg/m3
Using M35 and Fe 550
j 0.921
Q 12.56 Kg/cm2 1.256 N/mm2
d 1.400 m
Strength 1300 Kg/cm2
0.300
1.250
0.600

1.500

0.600

0.15
0.3

0.600 0.950 0.600

2.150

Weight of Slab (1.075x.3x2500) 806.25 Kg /m


Weight of 1 wall (1.2x.3x2500) 900 Kg /m
Weight of 2 haunches (0.15x0.15x1/2x2x2500) 56.25 Kg /m

Weight of Water((0.6x1.250)*1100 412.5 Kg /m

Total Weight 2175.00 Kg /m


Weight with Seismic (1.045) 2272.88 Kg /m

B.M due to L.L and D.L. 82107.609 Kg-m

Reinforcement Steel 48.98 cm2

Depth of the beam 147.62 cm

Check For Shear

V = (W/2) 1136.44 kg
11364.38 N
Depth 1400 mm
Width 300 mm

Tv = V/(bxd) 0.0271 N/mm2

% of 100As 1.17
steel= Bd

Now, Tc from table is


0.25 0.370
1.17 0.846
0.5 0.500

From above , Tc = 0.846 N/mm2

Since ,Tc >Tv . Therefore, there is no need for Shear Reinforcement


Hence, provide nominal shear.

Minimum Spacing Required,


Sv= 2.175x Asv x fy
b
Here,
Asv (2 legged Stirrups) 1.57 cm2 157
b 30 cm 300
fy 550 N/mm2 550
Sv= 62.6 cm 626.0

Hence, provided 2 legged stirrups 10mm dia@300mm.

Design of Slab ,

Effective depth of Slab 0.245 m


Effective span 1.550 m

Weight of Slab 1612.5 Kg /m


Weight of Haunches 112.5 Kg /m
Total D.L 1725 Kg /m
Dead per m 2 1112.90 Kg /m2

L.L of water 660 Kg /m2

Centre Moment (Wl2/24)

B.M. due to D.L. 111.41 kgm


B.M. increase due to Seismic 116.42 kgm

B.M. due to L.L. 66.07 kgm


B.M. increase due to Seismic 67.56 kgm

Total L.L and D.L moment 183.97 kgm

Reinforcement Steel 0.63 cm2

Hence , provide 10mm dia bar @150mm c-c .

End Support Moment (Wl2/12)


B.M. due to D.L. 222.81 kgm
B.M. increase due to Seismic 232.84 kgm

B.M. due to L.L. 132.14 kgm


B.M. increase due to Seismic 135.11 kgm

Total L.L and D.L moment 367.95 kgm

Reinforcement Steel (M/tjd) 1.25 cm2

Hence , provide 10mm dia bar @150mm c-c .

Moment at Ends (Top Reinforcement ) (Ch. 75.377)


B.M. B.M. Reinforce
Cofficient (kg-m) Cofficient Live Load (kg-m) Total B.M ment Provided
Dead Load Span Span 12 mm No. of Bars Spacing
D.L with L.L with (L.L+D.L.) (cm2) Dia Bar
Seismic Seismic

1 0.083 1112.90 1.550 232.839 0.083 660 1.550 135.11 367.950 1.25 1.13 1.11 901.18
2 0.083 1112.90 1.550 232.839 0.083 660 1.550 135.11 367.950 1.25 1.13 1.11 901.18

Moment at Centre (Bottom Reinforcement ) (Ch. 75.377)


B.M. B.M. Reinforce
Cofficient (kg-m) Cofficient Live Load (kg-m) Total B.M ment Provided
Dead Load Span Span 12 mm No. of Bars Spacing
D.L with L.L with (L.L+D.L.) (cm2) Dia Bar
Seismic Seismic

1 0.042 1112.90 1.550 116.420 0.042 660 1.550 67.555 183.975 0.63 1.13 0.55 1802.37
Adopted Distribution
(mm) Steel

200 10mm @ 200


200 10mm @ 200

Adopted Distribution
(mm) Steel

200 10mm @ 200

You might also like