Scribd
Upload
21 views

Signal Fow Graph

The document defines key terms used in signal flow graphs including input/output nodes, forward and feedback paths, self-loops, path and loop gains, and dummy nodes. It also provides examples of converting block diagrams to signal flow graphs by replacing summing points with nodes and connecting nodes with branches. Terminologies like input/output nodes, forward and feedback paths, path and loop gains are defined. An example signal flow graph is given to identify the input/output nodes, forward and feedback paths, self-loop, and determine the loop gains of feedback loops and path gains of forward paths.

Uploaded by

Lalith Abhiram
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Signal Fow Graph

The document defines key terms used in signal flow graphs including input/output nodes, forward and feedback paths, self-loops, path and loop gains, and dummy nodes. It also provides examples of converting block diagrams to signal flow graphs by replacing summing points with nodes and connecting nodes with branches. Terminologies like input/output nodes, forward and feedback paths, path and loop gains are defined. An example signal flow graph is given to identify the input/output nodes, forward and feedback paths, self-loop, and determine the loop gains of feedback loops and path gains of forward paths.

Uploaded by

Lalith Abhiram
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Signal Flow Graph

Basic Definitions in SFG


 Input/ Source Node

 Output/ Sink Node

 Forward Path

 Feedback loop/ Feedback Path

 Self-Loop

 Path Gain

 Dummy Node

 Non Touching Loops

 Loop Gain
Representation of System in SFG

Signal-flow graph consists of branches (which represent systems)


and nodes (which represent signals).
SIGNAL FLOW GRAPH
 Block diagram consists of blocks, signals, summing junctions and pickoff points.

 Signal flow graph consists of branches (which represent systems) and nodes (which
represent signals).
Converting Cascaded Block Diagram into a Signal Flow Graph

 First thing is to draw the signal nodes for the system. [figure (a)]
 Next thing is to interconnect the signal nodes with system branches. [figure
(b)]
Converting Parallel System Block Diagram into a Signal Flow Graph

 First thing is to draw the signal nodes for the system. [figure (c)]
 Next thing is to interconnect the signal nodes with system branches. [figure
(d)]
Converting Feedback System Block Diagram into a Signal Flow
Graph

 First thing is to draw the signal nodes for the system. [figure (e)]
 Next thing is to interconnect the signal nodes with system branches. [figure
(f)]
Example-1: Convert the block diagram into a signal flow graph.

 Replace all summer and pick –off point with a node.


 Replace all summer and pick –off point with a node.
 Eliminate the nodes that have single flow in and flow out.
[Node V2(s), V6(s), V7(s), V8(s)]
Terminologies:

 An input node or source contain only the outgoing branches. i.e., X1

 An output node or sink contain only the incoming branches. i.e., X4

 A path is a continuous, unidirectional succession of branches along which no node is

passed more than ones. i.e.,

X1 to X2 to X3 to X4, X2 to X3 back to X2, X1 to X2 to X4, are paths.

 A forward path is a path from the input node to the output node. i.e.,

X1 to X2 to X3 to X4, and X1 to X2 to X4, are forward paths.

 A feedback path or feedback loop is a path which originates and terminates on the same

node. i.e.; X2 to X3 and back to X2 is a feedback path.


Terminologies:

 A self-loop is a feedback loop consisting of a single branch. i.e.; A33 is a self loop.

 The gain of a branch is the transmission function of that branch when the transmission

function is a multiplicative operator. i.e., A21 or A33

 The path gain is the product of branch gains encountered in traversing a path. i.e.,

X1 to X2 to X3 to X4 is A21A32A43

 The loop gain is the product of the branch gains of the loop. i.e., the loop gain of the

feedback loop from X2 to X3 and back to X2 is A32A23.


Example-2: Consider the signal flow graph below and
identify the following:

a) Input node.
b) Output node.
c) Forward paths.
d) Feedback paths.
e) Self loop.
f) Determine the loop gains of the feedback loops.
g) Determine the path gains of the forward paths.
Example-2: Answers

You might also like