2016

SCHEDULE OF RATES
FOR
BUILDING AND IRRIGATION WORKS
AND
MATERIAL TESTING
NORTH CENTRAL PROVINCE

Prepared and Issued

by
Provincial Engineering Department
North Central Province
Maithreepala Senanayaka Mawatha,
Anuradhapura.
Tel :- 025-2220910, 025-2226157, 025-2225285
Fax :- 025-2235789
e-mail : - [email protected]

PROVINCIAL ENGINEERING DEPARTMENT 1

ES

N WORKS

G
VINCE

ment

atha,

PROVINCIAL ENGINEERING DEPARTMENT 2

 ADMINISTRATION STRUCTURE OF THE ENGINEERING DEPARTMENT

Designation Office Tele / Fax / E-mail

Deputy Chief Secretary 2nd Floor, 025-2220910 / 025-2222157

(Engineering) Provincial Building Complex, Fax : 025-2235789
Harishchandra Mawatha, [email protected]
Anuradhapura.

Director (Building) Maithreepala Senanayake Mawatha, 025-2226157 / 025-2225916

Anuradhapura. Fax : 025-2226157

Director (Designs ) Maithreepala Senanayake Mawatha, 025-2222423 / 025-2225285

Anuradhapura.

Divisional Engineer Divisional Engineer's Office, 025 - 2236386

Anuradhapura Anuradhapura. [email protected]

Divisional Engineer Divisional Engineer's Office, 025 - 2264286

Kekirawa Kekirawa. [email protected]

Divisional Engineer Divisional Engineer's Office, 025 - 2249136

Mahailluppallama Mahailluppallama. [email protected]

Divisional Engineer Divisional Engineer's Office, 025 - 2245930

Medawachchiya Medawachchiya. [email protected]

Divisional Engineer Divisional Engineer's Office, 027 - 2222406

Polonnaruwa Polonnaruwa. [email protected]

Engineer Material Testing Laboratory, 025-2263285

Material Testing Kekirawa. [email protected]

PROVINCIAL ENGINEERING DEPARTMENT 2

TMENT

PROVINCIAL ENGINEERING DEPARTMENT 2

 ENGINEERING STAFF
* Eng. (Ms.) K.C.D. Fernando : Deputy Chief Secretary(Engineering)
BSc. Eng., PGDip.(IWM), MSc.(UDM), (Acting)
CEng., MIE(SL), M-
* Eng.
5068 (Ms.) K.C.D. Fernando : Director (Buildings)
BSc. Eng., PGDip.(IWM), MSc.(UDM),

CEng., MIE(SL), M-
Eng. (Ms.) D.L.B.P. Wijesekara
* 5068 : Director (Designs, Consultancy &
BSc. Eng., MSc.(IWRM), CEng., MIE(SL), M-4492 Quality Control)

* Eng. H.M.J. Herath : Provincial Director - Irrigation

BSc.Eng., CEng., MIE(SL), M-5822
* Eng. S.J.K. Alas : Engineer - Health Department
BSc. Eng., AMIE(SL), AM-5978
* Eng. D.M.U.S.B. Dissanayake : Engineer - School works
BSc. Eng., CEng., MIE(SL), M-5187
* Eng. (Ms.) M.P.P. Dilhani : Divisional Engineer-Anuradhapura
BSc. Eng., CEng., MIE(SL), M-5698
* Eng. W. Jayasundara : Divisional Engineer-Medawachchiya
P.G. Diploma(Fdn. Eng.), Dip Public Procurement, / Project Engineer (Special Projects)
AM-7727
* Eng. B.A.N. Jayalath : Engineer - Provincial Irrigation
BSc. Eng., AMIE(SL), AM-11722 Department
* Eng. H.M.R.M. Aberathna : Divisional Engineer-Mahailuppallama
BSc. Eng., AMIE(SL), AM-10023
* Eng. A.A.D.C.R. Aluthgama : Engineer - Material Testing
BSc. Eng., AMIE(SL), AM-10760
* Eng. W.G.S.S. Bandara : Divisional Engineer - Polonnaruwa
BSc. Eng., AMIE(SL), AM-10614
* Eng. D.M.P. Dassanayake : Engineer - Other Departments
BSc. Eng., AMIE(SL), AM-11408
* Eng. W.H. Hapuarachchi : Mechanical Engineer
BSc. Eng., AMIE(SL), AM-11257
* Eng. D.S.B. Herath : Engineer - Building Services
BSc. Eng., AMIE(SL), AM-11753
* Eng. P. M.D.D.B. Pathiraja : Engineer - Structural Designs
BSc. Eng., AMIE(SL), AM-13319
* Eng. A.C. Ranathunga : Engineer - Provincial Irrigation
BSc.Eng., AMIE(SL), AM-13321 Department
* Eng. A. S. Kurukularathna : Engineer - Structural Designs

PROVINCIAL ENGINEERING DEPARTMENT 3

 Engineer - Structural Designs
BSc. Eng., AMIE(SL), AM-13318
* Eng. R. Jayathilake : Engineer - Provincial Irrigation
BSc. Eng., AMIE(SL), AM-14916 Department
* Eng.(Ms.) M.I.D. Muthukumarana : Engineer - Structural Designs
BSc. Eng., AMIE(SL), AM-14268
* Eng.(Ms.) K.N. Sewwandi : Electrical Engineer
BSc. Eng., AMIE(SL), AM-16232
* Eng. K.R. Kahanda Kumara : Divisional Engineer-Kekirawa
* W.N.P.M.S. Wijithaweera : Architect
BSc. (B.E.)
* Miss . E.I.C.M.Olukarada : Architect
BSc. (B.E.), Msc (Arch)

PROVINCIAL ENGINEERING DEPARTMENT 3

Chief Secretary(Engineering)

(Buildings)

(Designs, Consultancy &

ontrol)

l Director - Irrigation

- Health Department

- School works

al Engineer-Anuradhapura

al Engineer-Medawachchiya
Engineer (Special Projects)

- Provincial Irrigation
ent
al Engineer-Mahailuppallama

- Material Testing

al Engineer - Polonnaruwa

- Other Departments

cal Engineer

- Building Services

- Structural Designs

- Provincial Irrigation
ent
- Structural Designs

PROVINCIAL ENGINEERING DEPARTMENT 3

 - Provincial Irrigation
ent
- Structural Designs

Engineer

al Engineer-Kekirawa

PROVINCIAL ENGINEERING DEPARTMENT 3

 The Committee engaged for preparation of rates consisted of the following members.

Building Works

1 Eng. (Ms.) K.C.D.Fernando Deputy Chief Secretary (Engineering) -(Acting) / Director

(Building)
2 Eng. (Ms.) D.L.B.P. Wijesekara Director (Designs, Consultancy & QC)
3 Eng. (Ms.) M.P.P. Dilhani Divisional Engineer -Anuradhapura
4 Eng. (Ms.) K.N.Sewwandi Electrical Engineer
5 Eng. (Ms.) M.I.D.Muthukumarana Structural Design Engineer
6 Eng. D.M.P. Dassanayake Engineer - Other Departments
7 Eng. A.A.D.C.R. Aluthgama Engineer - Material Testing
8 Mr. W.N.P.M.S. Wijithaweera Architect
9 Mr. P.M.R.L. Jayarathna Drawing Office Assistant
10 Mr. B.M.U. Karunarathna Divisional Assistant - Anuradhapura
11 Mr. R.M.M.R. Amarasena Technical Officer (Civil)
12 Mr. P.B.T.G. Thilakarathna Technical Officer (Civil)
13 Mr. P.H.T. Madubasha Technical Officer (Civil)
14 Mr. B.M.A. Rathnayaka Technical Officer (Electrical)
15 Mr. E.A.J.S. Jayathissa Draughtsman
16 Mrs. Geetha Chathurani Abesinghe Development Assistant

Irrigation Works

1 Eng. H.M.J.Herath Provincial Director - Irrigation

2 Eng. B.A.N. Jayalath Irrigation Engineer
3 Eng. A.C.Ranathunga Irrigation Engineer
4 Eng. Rohan Jayathilaka Irrigation Engineer
5 Mr. J.K.J.Jayasooriya Technical Officer (Special)
6 Mr. W.L.G.S.Liyanage Technical Officer (Special)
7 Mr. A.L.Ranjith Mendis Technical Officer (Special)
8 Mr. R.M.M.S.Rathnayake Senior Draughtsman
9 Mr. D.M.C.K.Dissanayaka Technical Officer
10 Mr. J.A.Indula Mahesh Technical Officer
11 Miss. T.M.T.W.Nugawela Technical Officer
12 Mrs. H.Senani Mendis Draughtsman

Material Testing

1 Eng. A.A.D.C.R. Aluthgama Engineer - Material Testing

2 Mr. H.R.D. Hettiarachchi Technical Officer

PROVINCIAL ENGINEERING DEPARTMENT 4

 d of the following members.

Engineering) -(Acting) / Director

tancy & QC)

ation

PROVINCIAL ENGINEERING DEPARTMENT 5

 General Specifications :-

1. Specifications for Building Works - Volume I - ICTAD Publication No.

SCA/4/I - Revised Edition - July 2004
2. Specifications for Building Works - Volume II - Sanitary Installations -
ICTAD Publication No. SCA/4/II - Revised Edition - October 2001

3. Specifications for Water Supply, Sewerage & Storm Water Drainage

Works - ICTAD Publication No. SCA/3/2- Revised Edition - April
2002

4. Specifications for Electrical & Mechanical works Associated with

Building & Civil Engineering - ICTAD Publication No. SCA/8 -
Revised Edition - August 2000

* The Particular Specification shall be read in conjunction with

the General Specification where applicable. In the event the
Particular Specification is in conflict with the General
Specification, the Particular Specification shall be prevail.

* Particular Specifications for each category are mentioned

above. Full description and relevant notes mentioned above
for each category in the rate book should be given for each
item when preparing estimates.

* In the specifications, if any materials/fittings are described by

using a trade name, it is only for the purpose of indicating the
minimum level of quality and standard required. It may be
used any other material/ fitting, which are considered as
equivalent in quality and standard to those specified therein
subject to the approval of the Engineer.

* Rates can be used as guidance and adjustment could be made

to suit the specific site conditions subjected to approval.

* Rate include 10% for Overhead and 10% for profit.

PROVINCIAL ENGINEERING DEPARTMENT 5

 * Cost for loading, unloading, material wastage and transport
are included in rates.

* Rates do not include VAT.

PROVINCIAL ENGINEERING DEPARTMENT 6

 - General Data to be used for Calculations of Quantites.

(a) Multification Factors for Calculation of Painting Areas of Doors and

Windows

Description Multification Factor

Fully glazed doors/ windows/ fanlights 1.25
Glazed and paneled doors/ windows/ fanlights 1.50
Fully paneled doors/ windows/ fanlights 2.25

Ledged, braced and battened doors/ windows/ fanlights 2.25

Wooden louvered frames 3.00

Expanded metal or weld mesh with fillets or beadings
0.75
only
Expanded metal or weld mesh with frame 1.00
Collapsible gate 1.50
Corrugated asbestos or G. I. sheets 1.25

(b) Standard Norms for Basic Items.

Cement Sand Metal Rubble Bricks

Description Unit
(50kg) (m3) (m3) (m3) (Nr)
1:3:6 concrete m3 4.00 0.56 1.00 - -
1:2½:5 concrete m3 4.80 0.56 1.00 - -
1:2:4 concrete m3 5.65 0.60 1.00 - -
1:1½:3 concrete m3 8.13 0.56 1.00 - -
Random Rubble
m3 2.56 0.45 - 1.25 -
Masonry
225 mm brickwork m3 1.31 0.23 - - 512.00
112 mm brickwork m2 0.14 0.03 - - 60.00
Wall Plaster/ Soffit m2 0.09 0.02 - - -
Floor Rendering m2 0.15 0.02 - - -
Tile Bedding m2 0.13 0.02 - - -
DPC m2 0.24 0.03 - - -

PROVINCIAL ENGINEERING DEPARTMENT 6

 (c) Estimation of Reinforcement Quantites.
In Preparation of estimates, quantities of reinforcement will be assessed on the following
basis of concrete.

Description Maltification Factor

Strip footing 70 kg/m3

Strip beam 240 kg/m3
Columns 140 kg/m3
Wall 95 kg/m3
Plinth beam 70 kg/m3
Slab 95 kg/m3
Waffle slab 75 kg/m3
Beam 160 kg/m3
Staircases 140 kg/m3
Isolated foundations 100 kg/m3

Whereas Contractor shall be paid according to the quantity of reinforcement used.

- Rate Adjustment for Upper Floors in the Building

The rates given in this schedule applicable only for ground work. Therfore rates for upper
floors can be calculated by using following factors and the rates given in this schedule.

Second Third
Description First Floor
Floor Floor
Concrete Work 3% 5% 7%
Formwork 3% 5% 7%
Reinforcement 2.5% 5% 7.5%
Brickwork 5% 7% 10%
Calicut Tile Roof 3% 6% 9%
Asbestos Roof 3% 5% 7%
Zink Aluminium Roof 3% 5% 7%
Roof Plumbing 3% 5% 7%
Ceiling 3% 5% 7%
Plastering 5% 10% 15%
Wall Tiling 2% 4% 6%
Floor Tiling 2% 4% 6%
PROVINCIAL ENGINEERING DEPARTMENT 7
 Painting 3% 6% 9%

PROVINCIAL ENGINEERING DEPARTMENT 8

Reinforcement : Weights, Specified Spacings and Unit Weights

Weights of metric (millimetre) bars in kilograms per square metre

Size Weight Length

Spacing of bars in millimetres
(mm) per m per tonne
(kg) (m) 75 100 125 150 175 200 225 250 275 300
6 0.222 4505 2.960 2.220 1.776 1.480 1.269 1.110 0.987 0.888 0.807 0.740
8 0.395 2532 5.267 3.950 3.160 2.633 2.257 1.975 1.756 1.580 1.436 1.317
10 0.616 1623 8.213 6.160 4.928 4.107 3.520 3.080 2.738 2.464 2.240 2.053

12 0.888 1126 11.84 8.880 7.104 5.920 5.074 4.440 3.947 3.552 3.229 2.960
16 1.579 633 21.05 15.79 12.63 10.53 9.023 7.895 7.018 6.316 5.742 5.263
20 2.466 406 32.88 24.66 19.73 16.44 14.09 12.33 10.96 9.864 8.967 8.220

25 3.854 259 51.39 38.54 30.83 25.69 22.02 19.27 17.13 15.42 14.01 12.85
32 6.313 158 63.13 50.5 42.09 36.07 31.57 28.06 25.25 22.96 21.04
40 9.864 101 78.91 65.76 56.37 49.32 43.84 39.46 35.87 32.88

Basic weight = 0.00785 kg/mm2 per metre

Weight per metre = 0.006165 ø2 kg
Weight per mm2 at spacing s(mm) = 6.165ø2/skg
ø = diameter of bar in millimetres

PROVINCIAL ENGINEERING DEPARTMENT 8

 - Overhead and Profit Factor

All the rates given in this schedule include 10% for overhead and 10% for profit on the basic
cost. The breakdown of the overhead is given below.

Description %

1. Supervision of work (Wages of work Supervisors) 1.0

2. Supervision of labour 4.0
3. Temporary works
a) Provision of water and electricity etc. 0.2
b) Fencing and protection 0.2
c) Clearing and tiding up 0.2
d) 0.4
Collection of building materials including
cement and steel

4. Watchers for field stores and security of site 0.8

5. Tools and implements for miscellaneous work 0.9
6. Setting out and measurements 0.5
7. Transportation of supervisory staff 1.0
8. Bonds for bid, performance 0.3

9. Insurance for work and workmen's compensation 0.5

10.0

In the case of estimates above 10 million, it may be required to include items which are not
in the above list under the Preliminaries as items or provisional sum.

PROVINCIAL ENGINEERING DEPARTMENT 9

 Reference - BSR and ICTAD

PROVINCIAL ENGINEERING DEPARTMENT 10

 LEDGEND

Page

1. RATES FOR BUILDING WORKS 14 - 61

2. RATES FOR IRRIGATION WORKS 65 - 74

3. RATES FOR MATERIAL TESTING 75 - 77

PROVINCIAL ENGINEERING DEPARTMENT 10

PROVINCIAL ENGINEERING DEPARTMENT 11
 RATES
(BUILDING WORKS)

No. ITEM Page

A. DEMOLISHER 15-17

B. EXCAVATION & EARTHWORK 18

C. MASON 19

D. CONCRETOR 20-21

E. FORMWORK 22

F. REINFORCEMENT 23

G. BRICKLAYER 24

H. PLASTERER 25-26

I. PAVIOR 27-30

J. ROOFER 30-37

K. CARPENTER & JOINER 38-40

L. IRONWORK 41-43

M. PAINTER & DECORATOR 44-45

N. PLUMBER 46-50

O. DRAINLAYER 51-52

P. ELECTRICAL INSTALLATION 53-57

Q. MISCELLANEOUS 58

R. ALUMINIUM WORK 59-61

PROVINCIAL ENGINEERING DEPARTMENT 12

 RATES
(IRRIGATION WORKS)

No. ITEM Page

A. JUNGLE CLEARING 66

B. STRIPPING 66

C. EARTHWORK 66-67

D. COMMON EARTH EXCAVATION 67-69

E. DESILTING 69

F. TURFING 70

G. GRAVELLING 70

H. CONCRETE 71

I. RAINFORCEMENT 71

J. FORMWORK 71

K. RUBBLE MASONARY 71

L. RCC SPUN PIPE AND COLLARS 72

M. GATE FOR SLUICES 72

N. ROCK EXCAVATION 73

O. UNIT PRICES OF MATERIAL, LABOUR AND PLANT 74

PROVINCIAL ENGINEERING DEPARTMENT 13

 RATES

(MATERIAL TESTING)

No. ITEM Page

1 SOIL TESTING 76

2 CONCRETE TESTING 76

3 AGGREGATE TESTING 76

4 BLOCKS AND BRICKS TESTING 77

5 CEMENT TESTING 77

6 BITUMINOUS MATERIALS TESTING 77

7 ALUMINIUM TESTING 77

PROVINCIAL ENGINEERING DEPARTMENT 14

14 - 61

65 - 74

75 - 77

PROVINCIAL ENGINEERING DEPARTMENT 15

PROVINCIAL ENGINEERING DEPARTMENT 16
 RATES FOR
BUILDING WORKS

PROVINCIAL ENGINEERING DEPARTMENT 14

 Building Works Rate - 2016

A - DEMOLISHER
Rates for Demolisher shall include for:
(a) Scaffolding, shoring and shores required.
(b) Protection of site personal, plant and equipment by taking precautions against
uncontrolled collapse, electrical hazards and fire or explosion risks.
(c) 31/6538

NO. DESCRIPTION METRIC

UNIT RATE
A-1 Brickwork in lime demolished, brick stacked and debris cum 852.00
cleared within the site.
A-2 Brickwork in cement mortar demolished, brick stacked and cum 1,136.00
debris cleared within the site.
A-3 Ceiling existing removed, materials stacked and debris cleared sqm 107.00
within the site
A-4 Cement concrete demolished and debris cleared within the cum 4,961.00
site.
A-5 Reinforced concrete demolished in suspended floors, cum 10,858.00
reinforcement removed and debris cleared within the site.
A-6 Corrugated sheets (Iron, asbestos or aluminium) removed sqm 121.00
from roof or walls and stacked - single storied building
A-7 Corrugated sheets (Iron, asbestos or aluminium) removed sqm 132.00
from roofs or walls and stacked - 2 storied building.

A-8 Corrugated sheets (Iron, asbestos or aluminium) removed sqm 143.00

from roofs or walls and stacked - 3 storied buildings.
A-9 Door or window with frame size up to 40 sqft. removed from no. 1,560.00
existing walls and stacked.
A-10 Door or window with frame size over 40 sqft. removed from no. 2,340.00
existing walls and stacked.

A-11 Door or window sash only, up to 40 sqft. removed from no. 223.00
existing walls and stacked.
A-12 Door or window sash only, over 40 sqft. removed from no. 335.00
existing walls and stacked.
A-13 Down pipes, 4'' to 6'', old or decayed, removed from existing lm 52.00
building and stacked.
A-14 Drains demolished and debris cleared within the site. lm 102.00
A-15 Fence uprooted, barbed wire rolled up and all materials lm 213.00
stacked (Length of fencing to be measured)
A-16 Floors brick paved, demolished and debris cleared away sqm 126.00
within the site.

PROVINCIAL ENGINEERING DEPARTMENT 15

 Building Works Rate - 2016

A-17 Gate sash removed and stacked after demolishing cement no. 1,560.00
concrete blocks or removing posts and separating pintos
(demolishing brickwork where necessary paid for separately)

PROVINCIAL ENGINEERING DEPARTMENT 16

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
A-18 Glass panes in doors and windows and fanlights removed and sqm 688.00
stacked.
A-19 Gutter, eaves removed and stacked from roof of single storied lm 33.00
building.
A-20 Gutter, eaves removed and stacked from roof of 2 storied lm 49.00
building
A-21 Gutter, eaves removed and stacked from roof of 3 storied lm 66.00
building.
A-22 Partitions removed and stacked at site, including making good sqm 441.00
to walls and floors.

A-23 Cement, lime plastering chipped and debris cleared away. sqm 79.00

A-24 Rendering, cement chipped and debris cleared away from sqm 189.00
brick walls and floors within the site.

A-25 Rendering, cement chipped and debris cleared away from sqm 284.00
cement concrete floors and walls within the site.

A-26 Removing of existing roof (tiles, asbestos sheets or GI sheets) sqm 236.00
with timber frame, stacking usable material and clearing
debris in single storied building.

A-27 Removing of existing roof (tiles, asbestos sheets or GI sheets) sqm 316.00
with timber frame, stacking usable material and clearing
debris in 2 storied building.

A-28 Removing of existing roof (tiles, asbestos sheets or GI sheets) sqm 402.00
with timber frame stacking usable material and clearing
debris in 3 storied and above
A-29 Rubble masonry in cement demolished, rubble stacked and cum 1,774.00
debris cleared within the site.
A-30 Tiles, glazed demolished and debris cleared within the site. sqm 336.00

A-31 Tiles Calicut or half round, removed from roof of single sqm 86.00
storied buildings and stacked at site.

A-32 Tiles Calicut or half round removed from roof of 2 storied sqm 130.00
building and stacked at site.
A-33 Tiles Calicut or half round, removed from roofs of 3 storied sqm 173.00
and above buildings and stacked at site.
A-34 Waterproof Treatment of hot bitumen taken off from flat roof sqm 336.00
and debris cleared away.
A-35 Ceiling asbestos removed including timber framework sqm 399.00
stacking usable materials and debris cleared away in single
storied building.

PROVINCIAL ENGINEERING DEPARTMENT 17

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
A-36 Ceiling asbestos removed including timber frame work, sqm 486.00
stacking usable materials and debris cleared away in 2 storied
building.
A-37 Valance/Barge boarding removed, materials stacked and debris lm 33.00
cleared away in single storied building.
A-38 Valance/Barge board removed, materials stacked and debris lm 49.00
cleared away in 2 storied building.

A-39 Cement plastering in soffit chipped and debris cleared away. sqm 242.00

A-40 Roof trusses span up to 30' 0" removed from roof and no. 4,820.00
stacked.
A-41 Transport of debris to a place where 1-5 km away from the site cum 551.00
as directed by the Engineer including loading.

A-42 Transport of debris to a place where 5-10 km away from the cum 636.00
site as directed by the Engineer including loading.

A-43 Basin, sink, or urinals including all fittings removed and wall no. 1,740.00
made good

A-44 Water Closet or Squatting pan, removed, sewer connection no. 2,590.00
plugged and floor made good

PROVINCIAL ENGINEERING DEPARTMENT 18

 Building Works Rate - 2016

B - EXCAVATION & EARTHWORK

Rates for Excavation and Earthwork shall include for:

(a) Trimming sides, keeping clean, leveling, grading and consolidating bottom of bases
and trenches etc.
(b) Leveling and consolidating where required under slabs or sub-floor layers.
(c) Back filling and well ramming around foundation.
(d) Keeping all excavations free from storm or percolating water to keep excavation dry
at all stages of construction.
(e) Any necessary additional excavation for working spaces, planking and strutting etc.
(f) Providing shoring work where necessary.

NO. DESCRIPTION METRIC

UNIT RATE
B-1 Removing top soil to a depth of 150mm and depositing as sqm 143.00
directed within the site

B-2 Excavation for foundation in any material except rock cum 799.00
requiring blasting, part return fill in and ram, and surplus
dispose within the site as directed.

B-3 Excavation in any material except rock requiring blasting cum 587.00
including transporting up to 400m, depositing and leveling.

B-4 Excavation in trenches for walls and column pits in soft cum 1,158.00
disintegrated rock (not requiring blasting) up to a depth of
1.5m and depositing excavated materials to distance not
exceeding 10m.

B-5 Excavation in trenches for walls and column pits in hard rock cum 271.00
requiring blasting up to a depth of 1.5m and depositing
excavated materials to distance not exceeding 10m.

B-6 Filling under floors with gravel or other approved quality of cum 1,061.00
filling, spread, watered and compacted in 150mm layers as
per Engineer's instructions. (material available at site)

B-7 Filling under floors with gravel or other approved quality of cum 1,913.00
filling, spread, watered and compacted in 150mm layers as per
Engineer's instructions.(material not available at site)

B-8 Anti termite treatment on excavated foundation and sqm 305.00

compacted soil under floors (Should be used Approved
Chemicals In Pesticide Dept ) - Warranty period - 10 years

B-9 Drains, earth in any soil except rock requiring blasting cut to cum 689.00
gradient and shaped as directed, soil deposited within site.

PROVINCIAL ENGINEERING DEPARTMENT 19

 Building Works Rate - 2016

C - MASON

Rates for Masonry work shall include for:

(a) All joggles, clamps, dowels, ties, and templates.
(b) Rough and fair cutting forming splays.
(c) Angles, reveals and returns.
Instructions :
(a) Cement used should be SLS Certified Products for Masonry work
(b) Average crushing strength of 10 blocks shall be not less than 2.8 N/mm2

NO. DESCRIPTION METRIC

UNIT RATE
Rubble Masonry
C-1 150-225mm Random Rubble Masonry in cement mortar 1:5 cum 12,486.00
above 1 cube

C-2 150-225mm Random Rubble Masonry in cement mortar 1:5 cum 13,894.00
up to 1 cube
Block Masonry

C-3 150mm thick Hollow block work in cement and sand mortar sqm 1,995.00
1:5 with 400x150x200mm blocks (Cavities unfilled)

C-4 100mm thick Hollow block work in cement and sand mortar sqm 1,356.00
1:5 with 400x100x200mm blocks (Cavities unfilled)

C-5 150mm thick solid block work in cement and sand mortar 1:5 sqm 2,071.00
with 400x150x200mm blocks
C-6 100mm thick solid block work in cement and sand mortar 1:5 sqm 1,432.00
with 400x100x200mm blocks

PROVINCIAL ENGINEERING DEPARTMENT 20

 Building Works Rate - 2016

D - CONCRETOR

Grade of concrete used in the construction and recommended mixes as follows.

(a) Grade C20/25 Recommended Mix 1 : 1 ½ : 3 (20mm)
(b) Grade C16/20 Recommended Mix 1 : 2 : 4 (20mm)
(c) Grade C12/15 Recommended Mix 1 : 3: 6 (40mm)

Rate shall include,

(a) Mixing, hoisting, placing and compacting on the surfaces of any material or on formwork.
(b) Forming any construction joint.
(c) Vibrating, curing and protecting concrete surfaces from harmful weather conditions.
(d) Forming slope on upper surfaces where required.
(e) Grouting the earlier concreted edges.
(f) Making good after removal of formwork.
Instructions
(a) Prior approval for any concrete work should be taken from the Engineer.
(b) Approval for constituent materials and test reports for properties of concrete should
be taken from Quality Control Engineer, Quality Control lab, Kekirawa with
contractor's expense.
(c) Cement used should be SLS certified products approved for concrete.
(d) Reinforcement and formwork paid separately where not mentioned.

NO. DESCRIPTION METRIC

UNIT RATE
D-1 Cement concrete grade C12/15 above one cube. cum 15,235.00
D-2 Cement concrete grade C12/15 up to 1 cube. cum 16,518.00
D-3 75mm thick cement concrete with 1 : 2 ½ : 5 mixture in floors sqm 1,293.00
using concrete mixer and vibrator including laying of gauge
750 polythene sheet

D-4 Cement concrete grade C16/20 in column foundation, column cum 18,952.00
shaft and plinth beams using mixer and vibrator - up to first
floor level

D-5 Cement concrete grade C16/20 in slab, beams and stair case cum 20,054.00
using mixer and vibrator - up to first floor level

D-6 Cement concrete grade C20/25 in column foundation, cum 20,300.00

column shaft and plinth beams using mixer and vibrator - up
to first floor level

D-7 Cement concrete grade C20/25 in column shaft using mixer cum 21,557.00
and vibrator - up to second floor level
D-8 Cement concrete grade C20/25 in column shaft using mixer cum 23,260.00
and vibrator - up to third floor level

PROVINCIAL ENGINEERING DEPARTMENT 21

 Building Works Rate - 2016

D-9 Cement concrete grade C20/25 in slab, beams and stair case cum 21,741.00
using mixer and vibrator - up to first floor level

PROVINCIAL ENGINEERING DEPARTMENT 22

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
D-10 Cement concrete grade C20/25 in slab, beams and stair case cum 22,309.00
using mixer and vibrator - up to second floor level
D-11 Cement concrete grade C20/25 in slab, beams and stair case cum 23,161.00
using mixer and vibrator - up to third floor level
D-12 Cement concrete grade C16/20 in lintels (reinforcement and cum 17,824.00
shuttering paid separately) - up to first floor level

D-13 Cement concrete grade C16/20 in lintels (reinforcement and cum 18,959.00
shuttering paid separately) - up to second floor level
D-14 Cement concrete grade C16/20 in lintels (reinforcement and cum 20,663.00
shuttering paid separately) - up to third floor level
D-15 Lintel, cement concrete grade C16/20, 112x150mm with 2 lm 1,417.00
nos. 12 mm dia. tor steel bars and form work - up to first
floor level
D-16 Lintel, cement concrete grade C16/20, 112x150mm with 2 lm 1,476.00
nos. 12 mm dia. tor steel bars and form work - up to second
floor level

D-17 Lintel, cement concrete grade C16/20, 112x150mm with 2 lm 1,515.00

nos. 12 mm dia. tor steel bars and form work - up to third
floor level

D-18 Lintel, cement concrete grade C16/20, 225x150mm with 2 lm 1,660.00

nos. 12 mm dia. tor steel bars and form work - up to first
floor level
D-19 Lintel, cement concrete grade C16/20, 225x150mm with 2 lm 1,719.00
nos. 12 mm dia. tor steel bars and form work - up to second
floor level
D-20 Lintel, cement concrete grade C16/20, 225x150mm with 2 lm 1,758.00
nos. 12 mm dia. tor steel bars and form work - up to third
floor level
D-21 Coble stone in grade C16/20 cement concrete reinforced with no. 3,220.00
4 no. of 10mm dia. Tor steel, up to 1 cuft. in volume

D-22 75mm thick worktop in grade C16/20 cement concrete with sqm 4,339.00
10mm tor steel at 150mm c/c both ways including formwork
and soffit plastering

D-23 100mm thick copping in grade C16/20 concrete on 225mm lm 3,093.00

thick walls including 2nos. of 8mm tor steel bars and stirrups
with 6mm dia. mild steel including formwork finished smooth
with 50mm rendering and red cement floating with throat.

PROVINCIAL ENGINEERING DEPARTMENT 23

 Building Works Rate - 2016

D-24 100mm thick copping in grade C16/20 concrete on 112mm lm 2,234.00

thick walls including 2nos. of 8mm tor steel bars and stirrups
with 6mm dia. mild steel including formwork finished smooth
with 50mm rendering and red cement floating with throat.

PROVINCIAL ENGINEERING DEPARTMENT 24

 Building Works Rate - 2016

E - FORMWORK

Rates for formwork shall include for:

(a) All framing, propping, bracing, cutting angles, bolting, wedging, cleaning, wetting
and treating before pouring concrete.
(b) Erecting, Striking off and cleaning of formwork.
(c) Rubbing down, filling and making good the surface of concrete after removal of formwork.
Instructions
(a) All the formwork for slabs should be done in such a way that it is good enough to
apply a layer of skim coat or suitable pillar and painting, without soffit plastering.

NO. DESCRIPTION METRIC

UNIT RATE
E-1 12mm Plywood shuttering for slab, beams and staircase sqm 1,651.00
including dismantling - up to first floor level
E-2 12mm Plywood shuttering for slab, beams and staircase sqm 1,759.00
including dismantling - up to second floor level

E-3 12mm Plywood shuttering for slab, beams and staircase sqm 1,777.00
including dismantling - up to third floor level
E-4 12mm Plywood shuttering for column shaft including sqm 2,042.00
dismantling - up to first floor level

E-5 12mm Plywood shuttering for column shaft including sqm 2,116.00
dismantling - up to second floor level

E-6 12mm Plywood shuttering for column shaft including sqm 2,165.00
dismantling - up to third floor level

E-7 Shuttering for plinth beams and lintels including dismantling - sqm 1,228.00
up to first floor level
E-8 Shuttering for lintels including dismantling - up to second sqm 1,453.00
floor level

E-9 Shuttering for lintels including dismantling - up to third floor sqm 1,474.00
level
E-10 Class III timber shuttering for small works including sqm 790.00
dismantling

PROVINCIAL ENGINEERING DEPARTMENT 25

 Building Works Rate - 2016

F- REINFORCEMENT

Rates for Reinforcement shall include for:

(a) Rolling margin and waste.
(b) Bending, cutting, fabricating, hoisting, and placing in position.
(c) Holding and supporting including temporary fixing supports, hangers.
(d) Cleaning and wire brushing.
(e) All spacing, laps etc. in reinforced steel other than design laps.
(f) Tensile strength of Tor Steel should be not less than 460 N/mm2 and Mild Steel
should be not less than 250 N/mm2

Instructions
(a) Inevitable laps should be measured.
(b) Unless otherwise specified laps to be 50 times the diameter of the bar.
(c) Preparation, supplying & binding of cover blocks such that specified cover is
maintained at outer-most rod.
(d) Reinforcements should be CN, GTB or LANWA. Tensile strength of reinforcements
should be tested if requested, from the institution where specified by the Engineer
with contractor's expense.
(e) Some trade names are used only for the purpose of indicating the minimum level of
quality and standards.

NO. DESCRIPTION METRIC

UNIT RATE
F-1 Tor steel rods reinforcing in Column foundation and plinth M.Ton 219,774.00
beams up to DPC, bent to shape laid in position and tied with
G.I. Wire as directed

F-2 Tor steel rods reinforcing in columns, beams, slabs and M.Ton 230,574.00
lintels up to first floor level bent to shape laid in position and
tied with G.I. Wire as directed

F-3 Tor steel rods reinforcing in columns, beams, slabs and M.Ton 240,294.00
lintels up to second floor level bent to shape laid in position
and tied with G.I. Wire as directed
F-4 Tor steel rods reinforcing in columns, beams, slabs and M.Ton 246,774.00
lintels up to third floor level bent to shape laid in position
and tied with G.I. Wire as directed
F-5 Mild steel rods, shape into stirrups and laid in position and M.Ton 229,614.00
tied with GI wires as directed - up to first floor level

F-6 Mild steel rods, shape into stirrups and laid in position and M.Ton 239,334.00
tied with GI wires as directed - up to second floor level

F-7 Mild steel rod, shape into stirrups and laid in position and tied M.Ton 245,814.00
with GI wires as directed - up to third floor level

PROVINCIAL ENGINEERING DEPARTMENT 26

 Building Works Rate - 2016

G - BRICK LAYER

Rates for Brickwork shall include for:

(a) Wetting well all the surfaces of the bricks before using.
(b) Plumbing angles.
(c) Normal straight cuttings.
(d) Ranking of joints for plastering.
(e) All the necessary scaffolding.
(f) Ranking of joints for plastering.
Instructions :
(a) Cement used should be SLS Certified Products for Masonry work
(b) Average crushing strength of 10 bricks shall be not less than 7.0 N/mm2

NO. DESCRIPTION METRIC

UNIT RATE
G-1 Arch, segmental, brick in cement sand 1:3, including cum 20,563.00
plumbing angles, normal straight cutting, forming rebated
reveals and raking of joints for plastering
G-2 225mm thick brick work in cement - sand mortar 1:8 (up to cum 15,771.00
first floor level)
G-3 225mm thick brick work in cement - sand mortar 1:8 (up to cum 16,622.00
second floor level)
G-4 225mm thick brick work in cement - sand mortar mortar 1:8 cum 18,325.00
(up to third floor level)
G-5 Brick 112mm thick in cement - sand mortar 1:5 (up to first sqm 1,890.00
floor level)

G-6 Brick 112mm thick in cement - sand mortar 1:5 (up to second sqm 2,149.00
floor level)

G-7 Brick 112mm thick in cement - sand mortar 1:5 (up to third sqm 2,668.00
floor level)
G-8 Coping, brick in cement - sand mortar 1:5, weathered and lm 1,237.00
throated on 112mm walls, cement rendered with 12mm thick
1:3 mix complete

G-9 Coping, brick in cement - sand mortar 1:5, weathered and lm 1,670.00
throated on 225mm walls, cement rendered with 12mm thick
1:3 mix complete

G-10 Widening R.C.C Column by placing one brick on both side lm 886.00
of column to size 450x225mm

PROVINCIAL ENGINEERING DEPARTMENT 27

 Building Works Rate - 2016

H- PLASTERER

Rates for wall finishing shall include for:

(a) Temporary rules, screeds, ground etc.
(b) Ranking out joints of brickwork and backing concrete surface for forming key.
(c) Joints between different surfaces.
(d) Forming arises and stopping against joinery work, metal work etc.
(e) Making good around pipes, sanitary fittings and fixtures.
(f) Straight cutting and raking cutting holes, notching and other sundries Labour of a
like nature.
(g) Preparing sample panel of different finishes described below for the approval of the
Engineer. Each panel not less than 0.5 m2 in area.
(h) Cement used should be SLS Certified Products for masonry work.

NO. DESCRIPTION METRIC

UNIT RATE
H-1 D.P.C., 20mm thick, in cement-sand mortar 1:2 finished with sqm 1,094.00
two coats of hot tar applied at the rate of 0.25 liters per sqm.
for each coat.

H-2 20mm thick plinth plaster in 1:3 cement - sand mortar sqm 911.00
finished smooth with neat cement floating.
H-3 20mm thick plinth plaster in 1:3cement - sand mortar finished sqm 946.00
smooth with red cement floating.
H-4 Cement plastering with 1:5 mix, 15mm thick finished semi sqm 599.00
rough in external walls - up to first floor level

H-5 Cement plastering with 1:5 mix, 15mm thick finished semi sqm 657.00
rough in external walls - up to second floor level
H-6 Cement plastering with 1:5 mix, 15mm thick finished semi sqm 695.00
rough in external walls - up to third floor level

H-7 Cement plaster with 1:5 mix, 15mm thick finished smooth sqm 796.00
with skim coat in internal walls - up to first floor level

H-8 Cement plaster with 1:5 mix, 15mm thick finished smooth sqm 886.00
with skim coat in internal walls - up to second floor level

H-9 Cement plaster with 1:5 mix, 15mm thick finished smooth sqm 936.00
with skim coat in internal walls - up to third floor level
H-10 Cement lime plaster with 1:1:5 mix, 15mm thick finished sqm 802.00
smooth with lime putty in internal walls - up to first floor level
H-11 Cement lime plaster with 1:1:5 mix, 15mm thick finished sqm 883.00
smooth with lime putty in internal walls - up to second floor
level

PROVINCIAL ENGINEERING DEPARTMENT 28

 Building Works Rate - 2016

H-12 Cement lime plaster with 1:1:5 mix, 15mm thick finished sqm 936.00
smooth with lime putty in internal walls - up to third floor
level

PROVINCIAL ENGINEERING DEPARTMENT 29

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
H-13 Reveals or plaster band 150mm wide in walls with cement lm 335.00
lime and sand 1:1:5 mix finished to match existing

H-14 Finish smooth soffit of slab by applying skim coat - up to first sqm 331.00
floor level
H-15 Finish smooth soffit of slab by applying skim coat - up to sqm 355.00
second level
H-16 Finish smooth soffit of slab by applying skim coat - up to third sqm 371.00
floor level

H-17 15mm thick plaster to R.C.C. columns, beams and soffit of sqm 919.00
slab in cement - sand 1:3 mix including floating with lime
putty - up to first floor level

H-18 15mm thick plaster to R.C.C. columns, beams and soffit of sqm 1,027.00
slab in cement - sand 1:3 mix including floating with lime
putty - up to second floor level

H-19 15mm thick plaster to R.C.C. columns, beams and soffit of sqm 1,099.00
slab in cement - sand 1:3 mix including floating with lime
putty - up to third floor level

H-20 15mm thick semi rough finished plaster to R.C.C. columns, sqm 900.00
beams and soffit of slab in cement - sand 1:3 mix - up to first
floor level

H-21 15mm thick semi rough finished plaster to R.C.C. columns, sqm 1,007.00
beams and soffit of slab in cement - sand 1:3 mix - up to
second floor level

H-22 15mm thick semi rough finished plaster to R.C.C. columns, sqm 1,079.00
beams and soffit of slab in cement - sand 1:3 mix - up to third
floor level

H-23 15mm thick plastering to wall in cement- sand 1:3 mix sqm 621.00
including cement floating

H-24 Cracks in walls plastered in cement - sand 1:3 mix after lm 125.00
chipping to 50-100mm wide

PROVINCIAL ENGINEERING DEPARTMENT 30

 Building Works Rate - 2016

I - PAVIOR

Rates for paving and tiling shall include for:

(a) Preparing surfaces of concrete / brick to receive rendering plaster bedding etc.
(b) Joints between different surfaces.
(c) Finishing to slopes and cross falls.
(d) Straight cutting and waste of tiles and other types of floor finishes.
(e) Protecting finished surfaces.
(f) For temporary rules, screeds, ground etc.
(g) All normal cutting arises, rounded edges, bedding and pointing.
(h) Slope should be maintained to a suitable direction to flow the water towards out side.
(i) Expansion joints so that no cracks propagated.
(j) Tiles should be approved by the Architect.

NO. DESCRIPTION METRIC

UNIT RATE
I -1 Floors, cement concrete 1:2 1/2: 5 (25mm), 75mm thick, sqm. 1,996.00
cement rendered 12mm thick, 1:5 with expansion joints filled
with cement and sand (including laying gauge 750 polythene
sheet)

I -2 Rendering cement 12mm, in 1:5 cement and sand on existing sqm 630.00
concrete, finished smooth
I -3 Rendering cement 12mm, in 1:5 cement and sand on existing sqm 781.00
concrete, floating coat using red cement finished smooth
I -4 Rendering cement 12mm, in 1:5 cement and sand on existing sqm 563.00
concrete, finished rough
I -5 Tile glazed 200x200mm, Sri Lankan made of approved type sqm 3,533.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2,
with steel tile beadings on top and edges - Ground floor

I -6 Tile glazed 200x200mm, Sri Lankan made of approved type sqm 3,583.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2,
with steel tile beadings on top and edges - First floor

I -7 Tile glazed 200x200mm, Sri Lankan made of approved type sqm 3,617.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2,
with steel tile beadings on top and edges - Second floor

I -8 Tile glazed, 300x200mm, Sri Lankan made of approved type sqm 3,890.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - Ground floor

PROVINCIAL ENGINEERING DEPARTMENT 31

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
I -9 Tile glazed, 300x200mm, Sri Lankan made of approved type sqm 3,940.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - First floor

I -10 Tile glazed, 300x200mm, Sri Lankan made of approved type sqm 3,974.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - Second floor

I -11 Tile glazed, 300x600mm, Sri Lankan made of approved type sqm 4,650.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - Ground floor

I -12 Tile glazed, 300x600mm, Sri Lankan made of approved type sqm 4,700.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - First floor

I -13 Tile glazed, 300x600mm, Sri Lankan made of approved type sqm 4,734.00
and colour, with all specials, supplied and fixed to wall
including raking plaster and bedding in cement mortar 1:2
with steel tile beadings on top and edges - Second floor

I -14 Floor tile, 300x300mm, Sri Lankan made, nonskid pattern of sqm 3,340.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top -
Ground floor

I -15 Floor tile, 300x300mm, Sri Lankan made, nonskid pattern of sqm 3,390.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top - First
floor

I -16 Floor tile, 300x300mm, Sri Lankan made, nonskid pattern of sqm 3,424.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top -
Second floor

I -17 Floor tile, 200x200mm, Sri Lankan made, nonskid pattern of sqm 3,385.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top -
Ground floor

I -18 Floor tile, 200x200mm, Sri Lankan made, nonskid pattern of sqm 3,436.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top - First
floor

PROVINCIAL ENGINEERING DEPARTMENT 32

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
I -19 Floor tile, 200x200mm, Sri Lankan made, nonskid pattern of sqm 3,469.00
approved type and colour supplied and laid including plaster
bedding 1:2 with skirting and steel tile beadings on top -
Second floor

I -20 Homogeneous Floor tile, 300x300mm, Sri Lankan made, sqm 3,766.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Ground floor

I -21 Homogeneous Floor tile, 300x300mm, Sri Lankan made, sqm 3,817.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - First floor

I -22 Homogeneous Floor tile, 300x300mm, Sri Lankan made, sqm 3,850.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Second floor

I -23 Homogeneous Floor tile, 400x400mm, Sri Lankan made, sqm 4,317.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Ground floor

I -24 Homogeneous Floor tile, 400x400mm, Sri Lankan made, sqm 4,367.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - First floor

I -25 Homogeneous Floor tile, 400x400mm, Sri Lankan made, sqm 4,401.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Second floor

I -26 Homogeneous Floor tile, 600x600mm, Sri Lankan made, sqm 5,187.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Ground floor

I -27 Homogeneous Floor tile, 600x600mm, Sri Lankan made, sqm 5,238.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - First floor

I -28 Homogeneous Floor tile, 600x600mm, Sri Lankan made, sqm 5,271.00
nonskid pattern of approved type and colour supplied and laid
including plaster bedding 1:2 with skirting and steel tile
beadings on top - Second floor

PROVINCIAL ENGINEERING DEPARTMENT 33

 Building Works Rate - 2016

I -29 Floor tiles Tera cota of approved type laid on existing sqm 2,440.00
concrete floor including plaster bed in 1:2 cement and sand

PROVINCIAL ENGINEERING DEPARTMENT 34

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
I -30 Skirting 25x150mm in 1:5, projected or flush with walls and lm 403.00
including forming groove
I -31 Skirting 25x150mm in 1:5, projected or flush with walls and lm 531.00
including forming groove finished with red cement

I -32 Skirting 25x100mm in 1:5, projected or flush with walls and lm 262.00
including forming groove
I -33 Skirting 25x100 in 1:5, projected or flush with walls and lm 344.00
including forming groove finished with red cement

I -34 Floor ramp 75mm thick, 750mm width cement concrete lm 2,184.00
1:21/2:5(25mm) on gauge 750 polythene layer and cement
rendered, expansion joints filled with 1:2 bitumen sand
including filling and compacting gravel on the base and
providing 150x225mm curb at the edge finished smooth with
red cement floating

I -35 225mm width surface drain joined to the existing ramp with lm 1,804.00
75mm thick 1:2 1/2:5(25mm) concrete base, side wall of
112mm brick work in 1:5 cement sand rendering in 1:5 match
to existing floor/ramp complete with expansion joints and
necessary excavation

I -36 Laying of inter locking paving blocks of compressive strength sqm 2,871.00
of 25 N/mm2 (28 day) on 75mm thick sand bed including site
preparation, trimming, leveling and compacting with plate
compactor as per instructions

PROVINCIAL ENGINEERING DEPARTMENT 35

 Building Works Rate - 2016

J - ROOFER
Rates for Roof work shall include for:
(a) Hoisting and placing roofing materials in position.
(b) Laps, straight cutting and waste.
(c) Galvanized iron “J” bolts, nuts, limpets and bituminous felt washers, nails screw
clips, rivets straps and the like.
(d) Rafter hooks fixing rafters to the wall.
Rates for joinery work shall include for:
(a) Framing together all works in accordance with the best practices.
(b) Nails Screws, Glue, plugs etc.
(c) Priming backs before fixing.
(d) Rawl plugs, brass screws etc.
(e) Drilling and making goods.
Instructions
(a) Approval for all sizes of timber should be taken from the Engineer before using.
(b) All the timber used to be treated with wood preservative to the specifications.
(c) Ceiling sheets to be painted with one coat of acetic filler and two coats of emulsion
(d) paints.
All the beading to be painted with one coat of wood primer and two coats of enamel
paints.
(e) For exposed rafter roofs, timber should be well planed and varnished. Timber sizes
indicated in the description are the sizes before planning.

NO. DESCRIPTION METRIC

UNIT RATE
Roof including Timber frame
J-1 Corrugated asbestos sheet roof (sloping to two directions) sqm 2,762.00
including 50x100mm imported treated timber rafters at 900
c/c and 50x50mm imported treated timber bearers with
necessary coach screws and limpet washers or hook bolts,
prepare and apply one coat of wood preservative (black) to
structural timber work, including touching up cut end etc. after
fixing (Timber used other than those mentioned above
measured separately)

J-2 Calicut tile roof (sloping to four directions) on imported sqm 4,420.00
treated timber framework including 100x100mm struts,
50x175mm ridge, 50x150mm hip and valley rafters,
100x75mm wall plate, 75x125mm purling, 50x100mm rafters,
50x25mm reapers including nuts and bolts and, prepare and
apply one coat of wood preservative (black) to structural
timber work (Timber beams measured and paid separately)

J-3 Zink Alum. Sheet- Corrugated Type -colour- (Thickness sqm. 1,419.00
0.47 mm, strength 550Mpa) roof on existing framework
including necessary fasteners as per Manufacturer's
Specifications

PROVINCIAL ENGINEERING DEPARTMENT 36

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-4 Zink Alum. Sheet - Corrugated Type - Non-Colour sqm 1,287.00
(Thickness 0.47 mm, strength 550Mpa) roof on existing
framework including necessary fasteners as per
Manufacturer's Specifications

J-5 Zink Alum. sheet -Textured Type -colour- (Thickness 0.47 sqm. 1,749.00
mm, strength 550Mpa) roof on existing framework
including necessary fasteners as per Manufacturer's
Specifications

J-6 Asbestos corrugated sheet fixed on existing frame with sqm 1,563.00
necessary bolt and nuts (single storied building)
J-7 Asbestos corrugated sheet fixed on existing roof with sqm 1,603.00
necessary bolt and nuts (2 storied building)
Ceiling including Timber frame
J-8 Asbestos ceiling -to existing rafters
Asbestos ceiling fixed to existing rafters, with 50x50mm sqm 2,646.00
imported treated timber framework, interior beading
38x12mm and outer molding 38x38mm including prepare and
apply one coat of wood preservative to structural timber work
and application of one coat of Alkali resistant primer and two
coats of Emulsion paint to ceiling sheets including necessary
nails and screws.

J-9 Asbestos ceiling -with rafters

2.4 sqm 2,380.00

J-10 Plywood ceiling - with rafters

9mm plywood flat ceiling with 50x100mm imported timber sqm 3,605.00
framework at 1200mm c/c and 50x50mm imported treated
timber bearer at 600mm c/c, prepare and apply one coat of
wood preservative to structural timber work and painting
plywood sheets with two coats of varnish including necessary
nails and screws.

J-11 Lunumidella ceiling - to existing rafters

PROVINCIAL ENGINEERING DEPARTMENT 37

 Building Works Rate - 2016

J-11
Lunumidella slope ceiling under existing rafters with outer sqm 2,626.00
molding to the accepted design (All the beading and
Lunumidella planks should be painted with one coat of wood
sealer mixing with approved colour die and two coats of
varnish)

PROVINCIAL ENGINEERING DEPARTMENT 38

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-12 Lunumidella ceiling -With rafters
Lunumidella flat ceiling on 50x100mm imported timber sqm 3,836.00
framework at 600mm centers, with outer molding to the
accepted design (All the beading and Lunumidella planks
should be painted with one coat of wood sealer mixing with
approved colour die and two coats of varnish)

Exposed rafter roof with ceiling

J-13 Corrugated asbestos sheet roof with exposed rafter sqm 5,272.00
asbestos ceiling on 50x100mm imported treated timber rafters
at 600mm centers and 50x50mm imported treated timber
bearer and 50x25mm reapers for the joints of ceiling sheets
with necessary coach screws and limpet washers, and
25x6mm beading including prepare and apply one coat of
wood preservative (clear) and varnish to structural timber
work and application of one coat of Alkali resistant primer and
two coats of emulsion paint to ceiling sheets including
touching up cut end etc. after fixing (Timber used other than
those mentioned above measured separately)

J-14 Corrugated asbestos sheet roof with exposed rafter sqm 5,592.00
Lunumidella ceiling on 50x100mm imported treated timber
rafters at 300mm c/c and 50x50mm imported treated timber
bearer, with necessary coach screws and limpet washers,
including prepare and apply one coat of wood preservative and
varnish to structural timber work, including touching up cut
end etc. after fixing - Lunumidella planks should be painted
with one coat of wood sealer mixing with approved colour die
and two coats of varnish (Timber used other than those
mentioned above measured separately)

J-15 Corrugated asbestos sheet roof with exposed rafter sqm 5,334.00
plywood (9mm) ceiling on 50x100 imported treated timber
rafters at 600mm c/c and 50x50 imported treated timber
bearer at 600mm c/c with necessary coach screws and limpet
washers, and 25x6mm beading prepare and apply one coat of
wood preservative (clear) to structural timber work and
painting plywood sheets with two coats of varnish including
touching up cut end etc. after fixing (Timber used other than
those mentioned above measured separately)

PROVINCIAL ENGINEERING DEPARTMENT 39

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-16 Calicut tile roofing (sloping to four directions) on imported sqm 6,114.00
treated timber framework with exposed rafter asbestos
ceiling including 100x100mm struts, 50x175mm ridge,
50x150mm hip and valley rafters, 100x75mm wall plate,
75x125mm purlins, 50x100mm rafters, 50x25mm reapers
including nuts and bolts and 25x6mm beading including
prepare and apply one coat of wood preservative prepare and
apply one coat of wood preservative(clear) and varnish to
structural timber work and application of one coat of Alkali
resistant primer and two coats of emulsion paint to ceiling
sheets (Timber beams measured and paid separately)

J-17 Asbestos ceiling -to existing frame work

Fixing of Asbestos flat ceiling to existing rafters and existing sqm 700.00
timber framework including necessary nails and screws.

Ridging
J-18 Ridging, Calicut pattern bedded in cement and sand lime lm 735.00
mortar 1:1:4 . Colour to match tiles

J-19 Ridging with asbestos bedded in cement and sand mortar 1:4 lm 1,109.00

J-20 Supply and fix Zn-Al ridging (Colour) - 0.47 mm thick with lm 1,581.00
necessary bolts and nuts (Corrugated Type)

J-21 Supply and fix Zn-Al ridging (Non-colour) - 0.47 mm thick lm 669.00
with necessary bolts and nuts (Corrugated Type)
J-22 Supply and fix Zn-Al ridging (Colour) - 0.47 mm thick with lm 2,109.00
necessary bolts and nuts (Textured Type)
Gutters & Downpipes
J-23 Eaves gutter 150mm, rectangular, PVC fixed with PVC lm 558.00
brackets with all necessary specials
J-24 Down pipes, PVC fixed with wooden plug to wall including lm 666.00
all necessary specials
J-25 Supply and fix Zn-Al eave gutter (colour) - size 130x145mm, lm 1,519.00
0.47 mm thick with necessary bolts and nuts

J-26 Supply and fix Zn-Al eave gutter (non-colour) - size lm 1,414.00
130x145mm, 0.47 mm thick with necessary bolts and nuts

J-27 Supply and fix Zn-Al down pipes (colour) - size 100x100mm, lm 1,243.00
0.47 mm thick to wall with necessary bracket clips

J-28 Supply and fix Zn-Al down pipes (non-colour) - size lm 1,138.00
100x100mm, 0.47 mm thick to wall with necessary bracket
clips

PROVINCIAL ENGINEERING DEPARTMENT 40

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-29 Supply and fix standard Zn-Al gutter box - colour - (0.47mm no. 902.00
thick)
J-30 Supply and fix standard Zn-Al gutter box - non-colour - no. 824.00
(0.47mm thick)
Valley gutter
J-31 Supply and fix Aluminums valley gutter, 900mm girth bent lm 1,443.00
with end laps not less than 225mm width including 20mm
tongued and grooved planks laid to slope and profile on timber
members
J-32 Supply and fix Zn-Al valley gutter (Colour) with 900mm lm 1,342.00
girth, on existing steel members as per Manufacturer's
Specifications
J-33 Supply and fix Zn-Al valley gutter (non-colour) with 900mm lm
girth, on existing steel members as per Manufacturer's
Specifications
Flashing
J-34 Supplying and fixing gauge 20 GI wall flashing(600mm lm 1,899.00
Width) all complete
J-35 Supplying and fixing ZnAl wall flashing (600mm Width & lm 1,384.00
colour)
J-36 Supplying and fixing ZnAl wall flashing (600mm Width & lm 1,273.00
non-colour)

Valance & Barge Board

J-37 Barge board, Valance, facia, 20mm thick 225mm high, lm 1,256.00
GINISAPU local timber fixed complete with necessary
screws, preparing and painting with one coat of primer and
two coats of enamel paint

Insulation Foil
J-38 Furnishing and laying 3mm thick single side Aluminium foil sqm 174.00

J-39 Furnishing and laying 3mm thick Double side Aluminium foil sqm 243.00
J-40 Furnishing and laying gauge 17, 75x75mm Galvanized roof sqm 310.00
mesh
Roof Timber
J-41 Furnishing and fixing of 50x150mm Imported treated timber lm 1,243.00
and apply one coat of wood preservative
J-42 Furnishing and fixing of 75x100mm Imported treated timber lm 1,243.00
and apply one coat of wood preservative

J-43 Furnishing and fixing of 50x100mm Imported treated timber lm 666.00

and apply one coat of wood preservative
J-44 Furnishing and fixing of 75x125mm Imported treated timber lm 1,663.00
and apply one coat of wood preservative

PROVINCIAL ENGINEERING DEPARTMENT 41

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-45 Furnishing and fixing of 100x150mm Imported treated timber lm 3,336.00
and apply one coat of wood preservative
J-46 Furnishing and fixing of 175x50mm Imported treated timber lm 2,401.00
and apply one coat of wood preservative

J-47 Furnishing and fixing of 100x200mm Imported treated timber lm 4,143.00

and apply one coat of wood preservative

J-48 Furnishing and fixing of 50x50mm Imported treated timber lm 331.00

and apply one coat of wood preservative

J-49 Furnishing and fixing of 50x25mm Imported treated timber lm 207.00

and apply one coat of wood preservative
J-50 Supplying and fixing 38x12mm beadings for ceiling lm 138.00

J-51 Supplying and fixing 38x38mm molding for ceiling lm 144.00

Maintenance
J-52 Corrugated G.I. sheet 24 BWG, fixed to roof, walls or fence sqm 685.00
with necessary cup washers and hook bolts or screws (timber
framing paid for separately)
J-53 Leaks (up to 5 in numbers) in roofs of single storied building no. 240.00
made good
J-54 Leaks (above 5 in numbers) in roof of single storied building no. 60.00
made good
J-55 Leaks (up to 5 in numbers) in roofs of two or above storied no. 300.00
building made good
J-56 Leaks (above 5 in numbers) in roof of two or above storied no. 120.00
building made good

J-57 Leaks in corrugated sheet roof made good with bitumen no. 320.00
washers and G.I. bolts and nuts

J-58 Ridging, Calicut pattern removed and re-laid in cement mortar lm 604.00
1:1:4 and colour to match tile

J-59 Tiles, Calicut pattern, flat supplied and laid up to 25 tiles in no. 71.00
single storied building
J-60 Tiles, Calicut pattern, flat supplied and laid above 25 tiles and no. 53.00
up to 100 in single storied building

J-61 Tiles Calicut pattern supplied and laid on roofs - single storied sqm 626.00
building

J-62 Tiles Calicut pattern supplied and laid on roofs - two storied sqm 704.00
building

PROVINCIAL ENGINEERING DEPARTMENT 42

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
J-63 Roof covering with Calicut pattern tiles available at site on sqm 174.00
existing timber frame.

J-64 Roof covering with corrugated asbestos sheets available at site sqm 140.00
on existing timber frame with necessary roofing screws and
washers.
J-65 Furnishing and fixing of available timber purlins or rafters for lm 105.00
the roof including necessary screws and nails and, application
of one coat of wood preservative.

PROVINCIAL ENGINEERING DEPARTMENT 43

 Building Works Rate - 2016

K - CAPENTER AND JOINER

Rates for carpentry work shall include for:

(a) All Labour in framing together all work in accordance with the best practices,
complete with all necessary nails, spikes, screws etc.
(b) Hoisting and fixing in position.
(c) Drilling and making good.
(d) Applying two coats of and approved wood preservative before fixing.
(e) Testing to establish properties to conformity to specification.
Rates for joinery work shall include for:
(a) Framing together all works in accordance with the best practices.
(b) Nails Screws, Glue, plugs etc.
(c) Priming backs before fixing.
(d) Drilling and making goods.
(e) Rawtering all squares.
Rates for Glazing shall include for:
(a) Straight cutting and grinding edges where required.
(b) External miters to polishing and leveled edges.
(c) Curving edges.

NO DESCRIPTION METRIC
UNIT RATE
K-1 Supply and fix Front door, 95x70mm frame and 28mm thick sqm 13,063.00
sash with designs in Teak timber (Fit panels) complete with
brass furniture, 2 nos. 150mm barrel bolts and 3 nos. hinges
including preparation of surface and application of two coats
of Varnish

K-2 Door or Window, ledge braced and battened with grooved and sqm 12,718.00
tongued joints, 95x70mm frame and 19mm to 22mm thick
sashes in class 1 timber complete with brass furniture 2 nos.
150mm barrel bolts and 3 nos. hinges including preparation of
surface and application of two coats of Varnish

K-3 Door or window glazed and / or paneled with 95x70mm sqm 16,732.00
frame and 28mm thick sash in class 1 timber fixed complete
with brass furniture, 2 nos. 150mm barrel bolts and 6 nos.
hinges including preparation of surface and application of two
coats of Varnish - Double sash

K-4 Supply and fix Plywood door (Engineer Approved) with sqm 11,567.00
95x70mm frame and complete with brass furniture, 2 nos.
150mm barrel bolts and 3 nos. hinges including preparation
of surface and application of two coats of Varnish

PROVINCIAL ENGINEERING DEPARTMENT 44

 Building Works Rate - 2016

K-5 Supply and fix PVC door with frame complete with 3 hinges sqm 7,177.00
and lock/barrel bolt

PROVINCIAL ENGINEERING DEPARTMENT 45

 Building Works Rate - 2016

NO DESCRIPTION METRIC
UNIT RATE
K-6 Door or window glassed with 95x70mm frame comprising 2 sqm 9,996.00
no. of openable sashes with100x28mm outer frame and non-
openable 125x28mm timber strips area complete with brass
mongers including preparation of surface and application of
two coats of varnish

K-7 Door or windows glazed and / or paneled, sash only 28mm sqm 11,051.00
thick in class 1 timber with brass furniture, 2 nos. 150mm
barrel bolts and 3 nos. hinges including preparation of surface
and application of two coats of Varnish

K-8 Supplied and fixed plywood door sash 28mm thick (Engineer sqm 6,521.00
Approved) to the existing frame complete with brass furniture
2 nos. 150mm barrel bolts and 3 nos. hinges including
preparation of surface and application of two coats of Varnish

K-9 Supply and fix door sash 19 to 22mm thick, ledge braced and sqm 8,823.00
battened with grooved and tongued joints in class 1 timber
complete with brass furniture 2 nos. 6" barrel bolts and 3 nos.
hinges including preparation of surface and application of two
coats of Varnish

K-10 Door frame 95x70mm class 1 timber supplied and fixed in sqm 3,852.00
position

K-11 Door or window sash, removing, easing and re-fixing no. 636.00

K-12 Door or window sash easing only no. 236.00

K-13 Supply and fix Timber door class I with frame complete with sqm 7,938.00
3 hinges and lock/barrel bolt application of two coats of
Enamel paint
K-14 Door or window frames renewed in short length with class 1 lm 2,490.00
timber
K-15 Door or window, glazing bars renewed in class 1 timber lm 1,017.00

K-16 Door sash, swing, removed and re-fixed in new position no. 851.00

K-17 Louver blade 9mm thick in class 1 timber 100mm wide lm 518.00

K-18 Louver blade 9mm thick in class 1 timber 150mm wide lm 804.00
K-19 Wicket gate at entrance 1050x900mm double hinge fittings sqm 11,502.00
to include 2 pairs of 25x63mm butt hinges and 100mm iron
barrel bolts post and sash with 40x40x5mm angle iron and
50mm SWG 10 welded mesh complete with 2 coats of
anticorrosive paint

K-20 Glass panes 3 mm thick supplied and fixed with class 1 timber sqm 2,668.00
beading

PROVINCIAL ENGINEERING DEPARTMENT 46

 Building Works Rate - 2016

NO DESCRIPTION METRIC
UNIT RATE
K-21 Glass panes 5 mm thick supplied and fixed with class 1 timber sqm 2,959.00
beading

K-22 Beading or filleting for glass panes fixed complete with brass lm 72.00
panel pins (with class 1 timber)

K-23 Door or window frame altered, existing, rebate fillets using no. 4,397.00
class 1 timber with screws and sash re-hung on opposite side

K-24 Supplying and fix mortise lock - Union 678-24-95CH or no. 6,621.00
equivalent, with 1 years guarantee. (guarantee certificate
should be submitted with bills)

K-25 Supplying and fix switch lock - Bird or equivalent no. 2,721.00
Iron furniture
K-26 Supply and fix barrel bolt 100mm - Iron with brass screws no. 295.00

K-27 Supply and fix barrel bolt 75mm - Iron with brass screws no. 308.00

K-28 Supply and fix Hasp and staples 100mm - Iron with brass no. 209.00
screws
K-29 Supply and fix Hasp and staples 150mm - Iron with brass no. 409.00
screws
K-30 Supply and fix Casement fasteners - Iron with brass screws no. 295.00
K-31 Supply and fix Casement stays, 250mm - Iron heavy quality no. 328.00
with brass screws

K-32 Supply and fix door closer approved type with brass screws no. 3,925.00

K-33 Supply and fix Butt Hinge, 100mm - Iron with brass screws no. 643.00

K-34 Supply and fix Butt Hinge, 125mm - Iron with brass screws no. 711.00

Brass Furniture
K-35 Supply and fix Barrel bolts 150mm - brass, heavy quality with no. 715.00
brass screws

K-36 Supply and fix Casement fasteners -brass with mortise plate, no. 505.00
heavy quality with brass screws

K-37 Supply and fix Casement stays, 250mm - brass heavy quality no. 446.00
with brass screws

K-38 Supply and fix Butt Hinge, 100mm - brass heavy quality with no. 836.00
brass screws

K-39 Bolts, casement fasteners or stays removed and refixed no. 118.00
including making good to holes in frames and sashes

PROVINCIAL ENGINEERING DEPARTMENT 47

 Building Works Rate - 2016

L - IRON WORK

Rates for Metal work shall include for:

(a) To make good ground at balusters on completion.
(b) Welding where necessary.
(c) Wire brush and clean metal surfaces prior to painting.
(d) All fabricating work handling, hosting, fitting and fixing in position.
(e) Preparing surfaces and painting as specified or directed.

NO. DESCRIPTION METRIC

UNIT RATE
L-1 Supply and fix Iron grill with 20x6 mm flat iron outer frame sqm 6,660.00
and horizontal bracings at 300 mm intervals complete with
12x6 mm flat iron verticals at 75 mm c/c as per given design
including two coats of anticorrosive paint and enamel paint

L-2 Iron grill with 6 mm mild steel rods welded diagonally at 100 sqm 6,101.00
mm cts. both way and outer frame with 20x6 mm flat iron
fabricated and fixed complete including two coats of
anticorrosive paint and enamel paint.

L-3 Supply and fix Iron grill with 30x6 mm flat iron outer frame sqm 7,467.00
and horizontal bracing at 300mm intervals complete with
8mm mild steel rods vertically at 75mm c/c including two
coats of anticorrosive paint and enamel paint.

L-4 50x50mm G.I weld mesh fixed to existing frame with staple sqm 1,775.00
including painting (Beading paid separately)
L-5 50x50mm G.I weld mesh supplied and fixed to window frame sqm 4,551.00
with 50x6mm class 1 timber beadings and, painted weld mesh
with 2 coats of anticorrosive paint and beading with primer
coat and 2 coats of enamel paint including making opening for
bolts and casement stays

L-6 50x50mm G.I weld mesh fixed to 40x40x5mm angle iron sqm 5,057.00
frame fabricated and fixed to wall with rawl plugs and screws
including painting with enamel paint and anticorrosive paint

L-7 Supply and fix gate with Zink Alum gate clad sheet (colour) sqm 6,919.00
with 30mm heavy duty GI pipe frame work, 20mm heavy duty
squire tube bitterns and vertical members at the top, including
application of two coats of anticorrosive primer and finishing
coat of enamel paint complete with stap hinges, hasp and
staples as per given design

PROVINCIAL ENGINEERING DEPARTMENT 48

 Building Works Rate - 2016

L-8 Supply and place in position steel roof truss (WEB) - span 4.5- no. 53,872.00
6.0 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

PROVINCIAL ENGINEERING DEPARTMENT 49

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
L-9 Supply and place in position steel roof truss (WEB) - span 6.0- no. 64,565.00
7.5 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

L-10 Supply and place in position steel roof truss (WEB) - span 7.5- no. 84,201.00
9.0 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

L-11 Supply and place in position steel roof truss (FLAT) - span no. 59,816.00
4.5-6.0 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

L-12 Supply and place in position steel roof truss (FLAT) - span no. 82,737.00
6.0-7.5 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

L-13 Supply and place in position steel roof truss (FLAT) - span no. 91,745.00
7.5-9.0 lm - complete with double member exterior and single
member interior, 10mm gusset plate, 16mm dia. rag bolts,
10mm base plate welded and application of two coats of anti-
corrosive paint all as per detail drawing given by the
Department

L-14 Supplying and fixing Angle iron purling 40x40x5mm to lm 872.00

trusses with 10 mm dia. bolts and nuts including application
of anticorrosive paint

L-15 Supplying and fixing Angle iron purling 50x50x5mm to lm 813.00

trusses with 10mm dia. bolts and nuts including application of
anticorrosive paint
L-16 Supplying and fixing Angle iron purling 65x65x5mm to lm 1,168.00
trusses with 10mm dia. bolts and nuts including application of
anticorrosive paint

PROVINCIAL ENGINEERING DEPARTMENT 50

 Building Works Rate - 2016

L-17 Supplying and fixing End rafters, 50x50x5mm (double) angle lm 2,680.00
iron on gable ends with purling cleats including application
of anticorrosive paint

PROVINCIAL ENGINEERING DEPARTMENT 51

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
L-18 Furnishing and fixing 100x50mm (Thickness-2mm) C-Purlins lm 1,043.00
as per Manufacturer's Specifications

L-19 Furnishing and fixing 150x65mm (Thickness - 2mm) C- lm 1,496.00

Purlins as per Manufacturer's Specifications
L-20 Furnishing and fixing 75x38mm (Thickness - 2mm) C-Purlins lm 876.00
as per Manufacturer's Specifications

PROVINCIAL ENGINEERING DEPARTMENT 52

 Building Works Rate - 2016

M - PAINTER AND DECORATOR

Rates for painting shall include for:

(a) Preparation of surfaces, cleaning down.
(b) Smoothing, knotting, stopping etc.
(c) Protecting floors and fittings etc.
(d) Removing and replacing doors furniture and cleaning upon completion.
(e) Providing samples and specification of all paints to be used in the works.
(f) Providing painting to an approved colour scheme design.
(g) All the paints are to be done up to the manufacturers specification.
(h) Preparation sample panels of different finishes for the approval of the Engineer. Each
panel not less than 0.5 sqm in area.
NO. DESCRIPTION METRIC
UNIT RATE
M-1 Prepare and apply one coat of Alkali resistant primer and two sqm 360.00
coats of emulsion paint to walls - up to first floor level

M-2 Prepare and apply one coat of Alkali resistant primer and two sqm 400.00
coats of emulsion paint to walls - up to second floor level

M-3 Prepare and apply one coat of Alkali resistant primer and two sqm 440.00
coats of emulsion paint to walls - up to third floor level

M-4 Prepare and apply one coat of Alkali resistant primer and two sqm 368.00
coats of emulsion paint soffit of slabs - up to first floor level

M-5 Prepare and apply one coat of Alkali resistant primer and two sqm 408.00
coats of emulsion paint to soffit of slabs - up to second floor
level

M-6 Prepare and apply one coat of Alkali resistant primer and two sqm 442.00
coats of emulsion paint to soffit of slabs - up to third floor
level

M-7 Prepare and apply one coat of Acrylic wall filler and two coats sqm 403.00
of weather proof white and colour paint - up to first floor level

M-8 Prepare and apply one coat of Acrylic wall filler and two coats sqm 443.00
of weather proof white and colour paint - up to second floor
level

M-9 Prepare and apply one coat of Acrylic wall filler and two coats sqm 483.00
of weather proof white and colour paint - up to third floor
level
M-10 Prepare and apply one coat of Acrylic wall filler and two coats sqm 403.00
of bathroom paint, white and colour paint - up to first floor
level

PROVINCIAL ENGINEERING DEPARTMENT 53

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
M-11 Prepare and apply one coat of Acrylic wall filler and two coats sqm 443.00
of bathroom paint, white and colour paint - up to second floor
level

M-12 Prepare and apply one coat of Acrylic wall filler and two coats sqm 483.00
of bathroom paint, white and colour paint - up to third floor
level

M-13 Prepare and apply two coats of floor paint, red, gray or black sqm 412.00

M-14 Prepare and apply one coat of wood preservative to structural sqm 283.00
timber work, including touching up cut end etc. after fixing
M-15 Varnishing two coats after sand papering of the surface sqm 387.00

M-16 Preparing and painting wood work with primer and two coats sqm 423.00
of enamel paint

M-17 Painting aluminum paint 1 coat to metal surfaces sqm 179.00

M-18 Painting steel on new work with 2 coats of anti-corrosive sqm 324.00
paint
M-19 Painting walls with Emulsion paint, 2 coats, including sqm 305.00
preparation of surface

M-20 Painting Ceiling with 2 coats of Emulsion paint to the ceiling sqm 325.00
sheets and 2 coats of enamal paint to timber beadings
including preparation of surface

M-21 Painting walls with Weather shield paint, 2 coats, including sqm 352.00
preparation of surface

M-22 Wall, scraped to original plaster, sand papering and lime sqm 307.00
putting to cracks and defects, applying plaster of Paris and
preparing surface for new or similar application of emulsion,
snowcem or similar application

M-23 Preparing and painting wood work with 2 coats of enamel sqm 336.00
paint.
M-24 White or colour washing two coats to walls with SAMARA sqm 97.00

M-25 Water - Proofing of Bathrooms with approved materials as per sqm 380.00
Instructions

M-26 Preparing and painting wood work with water based primer sqm 2,863.00
and two coats of water based finishing coats

PROVINCIAL ENGINEERING DEPARTMENT 54

 Building Works Rate - 2016

N - PLUMBER

Rates for Plumbing shall include for:

(a) Excavation of trenches for services, pipes or drain pipes shall include for deepening
and widening as necessary to enable the barrels of pipes, ducts etc. to rest on firm
ground and to facilitate jointing .
(b) Testing installations on completion.
(c) Chasing in brickwork / block work / concrete floor / concrete columns and make good.
(d) Fixing pipes to brickwork / block work.
(e) Solder rivets, screws, nails, clips, brackets, straps etc.
(f) Testing installations on completion.
(g) Sterilization, of “Drinking water” pipes on completion.
FIXTURES, APPLIANCES AND EQUIPMENT
Rates for sanitary fixtures shall include for:
(a) Installation complete with plugs.
(b) Grated waste outlets.
(c) Brackets and all fixings including jointing to pipes.
Instructions
(a) Prior approval from the architect should be taken for all the sanitary fittings and
accessories.
(b) Guarantee certificates of fittings should be submitted to the Department with the
bills. No payment is done without bills.
(c) All the UPVC pipes to be SLS certified products.
(d) Some trade names are used only for the purpose of indicating the minimum level of
quality and standards.
NO. DESCRIPTION METRIC
UNIT RATE
N-1 Supply and lay PVC Pipe 20mm - type 1000 including all lm 95.00
necessary fittings

N-2 Supply and lay PVC Pipe 25mm - type 1000 including all lm 200.00
necessary fittings
N-3 Supply and lay PVC Pipe 32mm - type 1000 including all lm 335.00
necessary fittings

N-4 Supply and lay PVC Pipe 40mm - type 600 including all lm 371.00
necessary fittings

N-5 Supply and lay PVC Pipe 50mm - type 600 including all lm 417.00
necessary fittings

N-6 Supply and lay PVC Pipe 63mm - type 400 including all lm 722.00
necessary fittings

N-7 Supply and fix Ball valve PEGLER or equivalent - for no. 1,221.00
overhead tanks - 20mm - all complete

PROVINCIAL ENGINEERING DEPARTMENT 55

 Building Works Rate - 2016

N-8 Supply and fix Ball valve PEGLER or equivalent - for no. 1,821.00
overhead tanks - 25mm - all complete

PROVINCIAL ENGINEERING DEPARTMENT 56

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
N-9 Supply and lay 110mm drainage pipe PVC - special for lm 879.00
drainage - with necessary fittings complete
N-10 Wash basin, ceramic, with pedestal (Chinese made) with 15 no. 13,800.00
years guarantee complete with mono type, chromium plated
basin tap - (Momali, Huai or equivalent) - with 5 years
guarantee including all necessary fittings (Guarantee
certificates should be submitted with the bill)

N-11 Wash basin, ceramic, with pedestal (Sri Lankan made) with 25 no. 20,280.00
years guarantee complete with mono type, chromium plated
basin tap - (Momali, Huai or equivalent) - with 5 years
guarantee including all necessary fittings (Guarantee
certificates should be submitted with the bill)

N-12 Supply and fix closet, closed couple, Chinese made with 15 no. 25,136.00
years guarantee complete with hard seat cover and all
necessary fittings.(Guarantee certificate should be submitted
with the bill)

N-13 Supply and fix closet, closed couple, Sri Lankan made with no. 31,976.00
25 years guarantee complete with hard seat cover and all
necessary fittings.(Guarantee certificate should be submitted
with the bill)

N-14 Supply and fix 2 PC set, closed couple with hard seat cover, no. 32,156.00
(Chinese made) with 15 years guarantee complete with mono
type, chromium plated basin tap - (Momali, Huai or
equivalent) - with 5 years guarantee with all necessary
fittings.(Guarantee certificate should be submitted with the
bill)

N-15 Supply and fix 2 PC set, closed couple with hard seat cover, no. 50,576.00
(Sri Lankan made) with 25 years guarantee complete with
mono type, chromium plated basin tap - (Momali, Huai or
equivalent) - with 5 years guarantee with all necessary
fittings.(Guarantee certificate should be submitted with the
bill)

N-16 Supply and fix Closet Squatting type (Indian) with foot rest no. 6,536.00
ceramic, medium, with trap

N-17 Supply and fix stainless steel kitchen Sink, PRINCE or no. 8,286.00
equivalent - with single bawl, one side drain board including
chromium plated long neck type sink tap - Momali, Huai or
equivalent - with 5 years guarantee complete with all
necessary fittings - (overall size 900x450mm) - (Guarantee
certificate should be submitted with the bill)

PROVINCIAL ENGINEERING DEPARTMENT 57

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
N-18 Supply and fix stainless steel kitchen Sink, PRINCE or no. 7,740.00
equivalent with single bawl, without drain board including
chromium plated long neck type sink tap - Momali, Huai or
equivalent - with 5 years guarantee complete with all
necessary fittings (overall size 450x375mm) - (Guarantee
certificate should be submitted with the bill)

N-19 Supply and fix Ceramic Sink, 24"x15"x7" complete with no. 12,840.00
mono type, chromium plated long neck type sink tap -
(Momali, Huai or equivalent) - with 5 years guarantee
including all necessary fittings (Guarantee certificates should
be submitted with the bill)

N-20 Supply and fix corner wash basin complete with mono type, no. 8,490.00
chromium plated basin tap - (Momali, Huai or equivalent) -
with 5 years guarantee including all necessary fittings

N-21 Supply and fix chromium plated bidet spray - (Momali, Huai no. 3,597.00
or equivalent) - with 5 years guarantee with all necessities.
(Guarantee certificate should be submitted with the bill)

N-22 Supply and fix plastic bidet spray - with 1 years guarantee no. 1,155.00
with all necessities.
N-23 Supply and fix Urinal bawl type no. 5,190.00
N-24 Supply and fix Urinal bawl type with flush valve(Sri Lankan no. 14,502.00
made with guarantee)
N-25 Supply and fix bath room accessories set (chromium plated no. 7,200.00
with 5 years guarantee) - 4 pcs. (mirror, mirror shelf, towel bar
and soap holder) all complete

N-26 Supply and fix bath room accessories set (chromium plated no. 8,070.00
with 5 years guarantee) - 6 pcs. (mirror, mirror shelf, towel
bar, soap holder, tooth brush holder and toilet paper holder) all
complete

N-27 Supply and fix Mirror, bathroom type, 20" x 16" with shelves no. 4,920.00

N-28 Supply and fix Mirror, bathroom type, 20" x 16" with plastic no. 2,610.00
back and shelves
N-29 Supply and fix Plastic Shower rose, with one year guarantee no. 746.00

N-30 Supply and fix head shower, chromium plated heavy with 5 no. 3,510.00
years guarantee
N-31 Supply and fix Telephone shower with bar, chromium plated no. 8,430.00
heavy with 5 years guarantee including flexible cable

N-32 Supply and fix Soap tray, chromium plated (Chinese) no. 885.00

PROVINCIAL ENGINEERING DEPARTMENT 58

 Building Works Rate - 2016

N-33 Supply and fix towel bar, chromium plated (Chinese) no. 1,395.00

PROVINCIAL ENGINEERING DEPARTMENT 59

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
N-34 Supply and fix concealed stop cock (brass) - Mono type (Italy no. 1,395.00
or UK made) with 5 years guarantee (Guarantee certificate
should be submitted with the bill)

N-35 Supply and fix Angle valve (Momali, Huai or equivalent) with no. 1,965.00
5 years guarantee (Guarantee certificate should be submitted
with the bill)

N-36 Supply and fix Long neck type Sink tap, chromium plated - no. 2,835.00
(Momali, Huai or equivalent) - with 5 years guarantee
(Guarantee certificate should be submitted with the bill)

N-37 Supply and fix bib tap 20mm dia. - (Momali, Huai or no. 1,965.00
equivalent) - with 5 years guarantee (Guarantee certificate
should be submitted with the bill)

N-38 Supply and fix 20mm dia. plastic Bib tap - Water Tec or no. 453.00
equivalent - all complete
N-39 Supply and fix stop cock/gate valve PVC Water Tec or no. 369.00
equitant with SLS standards - 20mm dia.

N-40 Supply and fix stop cock/gate valve PVC Water Tec or no. 484.00
equitant with SLS standards - 25mm dia.

N-41 Supply and fix stop cock/gate valve PVC Water Tec or no. 505.00
equitant with SLS standards - 32mm dia.

N-42 Supply and fix stop cock/gate valve PVC Water Tec or no. 715.00
equivalent with SLS standards - 40mm dia.

N-43 Plastic shell water tank with 10 years guarantee of capacity no. 16,020.00
500 ltr. Including transporting, placing in position and fixing
to the accepted Engineering standards

N-44 Plastic shell water tank with 10 years guarantee of capacity no. 23,880.00
1000 ltr. Including transporting, placing in position and fixing
to the accepted Engineering standards

N-45 Plastic shell water tank with 10 years guarantee of capacity no. 42,480.00
2000 ltr. Including transporting, placing in position and fixing
to the accepted Engineering standards

N-46 Plastic shell water tank with 10 years guarantee of capacity no. 83,880.00
5000 ltr. Including transporting, placing in position and fixing
to the accepted Engineering standards

N-47 Supply and fix Cover and seat for WC - plastic no. 3,810.00

N-48 Supply and fix Chromium plated flexible cable (Momali, Huai no. 1,710.00
or equivalent)

PROVINCIAL ENGINEERING DEPARTMENT 60

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
N-49 Flushing cistern, plastic low level, with flush pipe and no. 4,800.00
bracket supplied and fixed complete

N-50 Closet, pedestal type, available at site fixed with cement no. 2,514.00
concrete after breaking concrete floor and making good and
making connection

N-51 Supply and fix PVC specials with SLS standards - 20mm dia. no. 116.00
(Elbow, Bend, Socket)

N-52 Supply and fix PVC specials with SLS standards - 25mm dia. no. 133.00
(Elbow, Bend, Socket)
N-53 Supply and fix PVC specials with SLS standards - 32mm dia. no. 142.00
(Elbow, Bend, Socket)

N-54 Supply and fix PVC specials with SLS standards - 40mm dia. no. 181.00
(Elbow, Bend, Socket)

N-55 Supply and fix PVC specials with SLS standards - 50mm dia. no. 224.00
(Elbow, Bend, Socket)

N-56 Supply and fix PVC specials with SLS standards - 63mm dia. no. 272.00
(Elbow, Bend, Socket)

N-57 Supply and fix PVC specials with SLS standards - 20mm dia. no. 90.00
Tees
N-58 Supply and fix PVC specials with SLS standards - 25mm dia. no. 124.00
Tees
N-59 Supply and fix PVC specials with SLS standards - 32mm dia. no. 145.00
Tees
N-60 Supply and fix PVC specials with SLS standards - 40mm dia. no. 194.00
Tees
N-61 Supply and fix PVC specials with SLS standards - 50mm no. 256.00
dia.Tees
N-62 Supply and fix PVC specials with SLS standards - 63mm dia. no. 342.00
Tees

PROVINCIAL ENGINEERING DEPARTMENT 61

 Building Works Rate - 2016

O - DRAINLAYER

Rates for underground drainage shall include for:

(a) Short lengths, joints and cutting at Manholes.
(b) Cutting and fixing pipe work to fittings.
(c) Testing.
(d) Grading to slopes and falls.
NO. DESCRIPTION METRIC
UNIT RATE
O-1 Connection to existing sewer or manhole Item 2,076.00
O-2 Drainage pipe 110mmdia. (type 400) PVC laid on cement lm 1,984.00
concrete 150mm up to 600mm depth of invert including
excavation and cement concrete hunching 1:3:6 (40mm)

O-3 Furnishing and fixing of Multi-floor trap including 150mm no. 1,716.00
plastic grating

O-4 Gulley pit with internal dimension 300x300x300mm deep, no. 5,648.00
150mm thick 1:3:6(40mm) concrete foundation, 225mm thick
brick work in 1:5 ct. sand, 12mm thick cement sand rendering
in 1:2 with forming canals and 75mm thick R.C.C. slab as per
Drawings

O-5 Manhole with internal dimension 450x450x600mm deep, no. 12,072.00

150mm thick 1:3:6(40mm) concrete foundation, 225mm thick
brick work in 1:5 ct. sand, 12mm thick cement sand rendering
in 1:2 with forming cannels and 75mm thick R.C.C. slab as
per Drawings

O-6 Manhole with internal dimension 600x600x600mm deep, no. 15,964.00

150mm thick 1:3:6(40mm) concrete foundation, 225mm thick
brick work in 1:5 ct. sand, 12mm thick cement sand rendering
in 1:2 with forming canals and 75mm thick R.C.C. slab as per
Drawings

O-7 Manhole with internal dimension 750x750x600mm deep, no. 21,718.00

150mm thick 1:3:6(40mm) concrete foundation, 225mm thick
brick work in 1:5 ct. sand, 12mm thick cement sand rendering
in 1:2 with forming canals and steel grating with 16mm dia.
MS rod welded at 50mm centers to 25 x 25 x 5 mm angle iron
frame including application of anti-corrosive paint.

PROVINCIAL ENGINEERING DEPARTMENT 62

 Building Works Rate - 2016

O-8 Septic tank with internal dimensions 2325x900x2100mm, no. 92,755.00

partition with same wall, all complete including excavation,
100mm thick base slab with 1:3:6 (40mm), 225mm brick
work, 20mm thick 1:3 cement rendering including 75mm
cover slab with 10mm bars at 225mm c/c both way and
63mm vent pipe. (Refer relevant Drawings) - for 30 persons

PROVINCIAL ENGINEERING DEPARTMENT 63

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
O-9 Septic tank with internal dimensions 3225x900x2100, no. 116,844.00
partition with same wall, all complete including excavation,
100mm thick Base slab with 1:3:6 (40mm), 225mm brick
work, 20mm 1:3 cement rendering including 75mm cover slab
with 10mm bars at 225mm c/c both way and 63mm vent pipe.
(Refer relevant Drawings) - for 60 persons

O-10 Septic tank with internal dimensions 4125x1050x2100mm, no. 147,806.00

partition with same wall, all complete including excavation,
100mm thick Base slab with 1:3:6 (40mm), 225mm brick
work, 20mm thick 1:3 cement rendering including 75mm
cover slab with 10mm bars at 225mm c/c both way and
63mm vent pipe. (Refer relevant Drawings) - for 100 persons

O-11 Soakage pit with internal dia. 1200mm and depth 1500mm, all no. 53,670.00
complete including excavation, ring beam with 4 Nos. 10 mm
bars & 6 mm dia. stirrups at 225mm spacing at bottom of
wall, 225mm brick work and 75mm thick cover slab with
12mm bars in 150mm c/c both way (as per detail drawing)

O-12 Soakage pit with internal dia. 1200mm and depth 3000mm, all no. 78,480.00
complete including excavation, ring beam with 4 Nos. 10 mm
bars & 6 mm dia. stirrups at 225mm spacing at bottom of
wall, 225mm brick work and 75mm thick cover slab with
12mm bars in 150mm c/c both way (as per detail drawing)

O-13 Supply and fix Diameter 900mm & Length 2400mm ready no. 45,707.00
made RCC septic tank (Engineers Approval)

PROVINCIAL ENGINEERING DEPARTMENT 64

 Building Works Rate - 2016

P - ELECTRICAL INSTALLATION

Rates for Electrical Installations shall include for:

(a) All necessary conduits, cables, fittings, screws, nails clips, brackets straps, and the like.
(b) Giving notices, obtaining permits, paying fees etc.
(c) Provision of drawings or circuit diagrams etc.
(d) Labeling switch and switches or other fittings.
(e) Providing samples of switches or other fittings.
(f) Earthening and testing installation as required.
Instructions
(a) Before conduit pipes are laid on concrete floor slabs, a conduit layout drawing shall
(b) be
Allprepared
electricalby the contractor
installation shallfor
be the
for approval
400 volts of consultant.
/ 230 volts 50 Hz.
(c) 5 Amp final sub-circuits shall be carried out by the looping-in method.
(d) No joints are permitted in the runs of cables.
(e) Fixing heights from finished floor level, unless directed otherwise shall be as follows,
Main switches (switch fuses) - 1.5 m
Lamp fittings - 2.4 m
Switches and fan regulators - 1.4 m
(f) Current operated RCCB’s.
(g) Earth resistance shall be less than 5 Ohms, tested on a dry day.
(h) All fan regulators to be earthen.
(i) Some trade names are used only for the purpose of indicating the minimum level of
quality and standards.

NO. DESCRIPTION METRIC

UNIT RATE
P-1 Supply and install Earth electrode copprer rod, 1800mm long no. 2,211.00
fixed on ground with connection
P-2 Supply and install 65x65x6 mm angle iron, service bracket, D no. 5,724.00
bracket and Insulator with necessary nuts and bolts for main
wire fixed to wall or roof frame - Single Phase
P-3 Supply and install 65x65x6 mm angle iron, service bracket, D no. 8,682.00
bracket and Insulator with necessary nuts and bolts for main
wire fixed to wall or roof frame - Three Phase
P-4 Supply install MCB 6 way, 40A, 2 pole Isolator, 40A RCCB no. 10,764.00
2-pole and box fixed with 7/1.35mm single core cable -
Single Phase
P-5 Supply install MCB 8 way, 40A, 2 pole Isolator, 40A RCCB no. 12,489.00
2-pole and box fixed with 7/1.35mm single core cable -
Single Phase
P-6 Supply install MCB 10 way, 40A, 2 pole Isolator, 40A RCCB no. 14,274.00
2-pole and box fixed with 7/1.35mm single core cable - Single
Phase

PROVINCIAL ENGINEERING DEPARTMENT 65

 Building Works Rate - 2016

P-7 Supply install MCB 6 way, 63A, 4 pole Isolator, 63A RCCB no. 28,389.00
4-pole and box fixed with 7/1.35mm single core cable - Three
Phase

PROVINCIAL ENGINEERING DEPARTMENT 66

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
P-8 Supply install MCB 8 way, 63A, 4 pole Isolator, 63A RCCB no. 33,564.00
4-pole and box fixed with 7/1.35mm single core cable -
Three Phase
P-9 Supply install MCB 10 way, 63A. 4 pole Isolator, 63A RCCB no. 38,739.00
4-pole and box fixed with 7/1.35mm single core cable -
Three Phase
P-10 Supply and install Electric bell and bell push complete with no. 3,658.00
necessary wiring
P-11 Supply and install Ceiling fan 56",(230V, 80W) according to no. 11,744.00
Engineers Approval & SLS certificate complete with regulator
and other fittings (Warranty period of 2 Years)
P-12 Supply and install Wall fan 16" all complete no. 7,596.00

P-13 Supply and install Exhaust fan all complete no. 10,740.00

P-14 Supply and install Florescent lamp 20W, 600mm single, with no. 4,088.00
plastic cover including switch and necessary wiring
P-15 Supply and install Florescent lamp 40W, 1200mm single, with no. 4,148.00
plastic cover including switch and necessary wiring
P-16 Supply and install Florescent lamp 40W, 1200mm, double, no. 4,328.00
with plastic cover including switch and necessary wiring
P-17 Supply and install Ceiling lamp barral type, dia.150mm - no. 3,476.00
including CFL bulb with guarantee, switch and necessary
wiring
P-18 Supply and install Pendent lamp including switch and no. 2,459.00
necessary wiring
P-19 Supply and install Pendant lamp with CFL bulb - 20w ( spiral no. 2,939.00
or globe) - with guarantee - including switch and necessary
wiring
P-20 Supply and install Batten lamp including switch and no. 2,333.00
necessary wiring
P-21 Supply and install Batten lamp with CFL bulb - 20w ( spiral no. 2,717.00
or globe) - with guarantee - including switch and necessary
wiring
P-22 Supply and install Wall lamp bracket type, single glass globe no. 3,539.00
with CFL bulb - 20w ( spiral or globe) including guarantee,
switch and necessary wiring
P-23 Supply and install LED lamp 5W including switch and no. 3,170.00
necessary wiring-with gurantee
P-24 Supply and install LED lamp 7W including switch and no. 3,410.00
necessary wiring-with gurantee
P-25 Supply and install LED lamp 9W including switch and no. 3,650.00
necessary wiring-with gurantee

PROVINCIAL ENGINEERING DEPARTMENT 67

 Building Works Rate - 2016

P-26 Supply and install 5A Switch Socket outlet including no. 2,907.00
necessary wiring

PROVINCIAL ENGINEERING DEPARTMENT 68

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
P-27 Supply and install 13A Switch Socket outlet including no. 3,666.00
necessary wiring
P-28 Supply and install 15A Switch Socket outlet including no. 3,986.00
necessary wiring
P-29 Supply and install 1/1.13mm Cu/PVC/PVC-1sqmm cable- lm 534.64
single core
P-30 Supply and install 7/0.53 mm Cu/PVC/PVC-1.5sqmm cable- lm 551.04
single core
P-31 Supply and install 7/0.53 mm Cu/PVC/PVC-1.5sqmm cable- lm 578.60
Two core
P-32 Supply and install 7/0.67mm Cu/PVC/PVC-2.5sqmm cable- lm 567.44
single core
P-33 Supply and install 7/0.67mm Cu/PVC/PVC-2.5sqmm cable- lm 603.52
Two core
P-34 Supply and install 7/0.85mm Cu/PVC/PVC-4sqmm cable- lm 590.40
Single core
P-35 Supply and install 7/0.85mm Cu/PVC/PVC-4sqmm cable- lm 652.72
Two core
P-36 Supply and install 7/1.04mm Cu/PVC/PVC-6sqmm cable- lm 623.20
Single core
P-37 Supply and install 7/1.04mm Cu/PVC/PVC-6sqmm cable- lm 708.48
Two core
P-38 Supply and install 7/1.35mm Cu/PVC/PVC-10sqmm cable- lm 688.8
Single core
P-39 Supply and install 7/1.35mm Cu/PVC/PVC-10sqmm cable- lm 856.00
Two core
P-40 Supply and install 7/1.7mm Cu/PVC/PVC-16sqmm cable- lm 774.08
Single core
P-41 Supply and install 7/1.7mm Cu/PVC/PVC-16sqmm cable- lm 1,010.00
Two core
P-42 Supply and install 19/1.35mm Cu/PVC/PVC-25sqmm cable- lm 957.76
Single core
P-43 Supply and install 19/1.53mm Cu/PVC/PVC-35sqmm cable- lm 1,085.68
Single core
P-44 Supply and install 1/1.13mm Cu/PVC- 1sqmm earth wire lm 524.80

P-45 Supply and install 7/0.53mm Cu/PVC- 1.5sqmm earth wire lm 541.20

P-46 Supply and install 7/0.67mm Cu/PVC- 2.5sqmm earth wire lm 551.04

PROVINCIAL ENGINEERING DEPARTMENT 69

 Building Works Rate - 2016

P-47 Supply and install 7/0.85mm Cu/PVC- 4sqmm earth wire lm 577.28

PROVINCIAL ENGINEERING DEPARTMENT 70

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
P-48 Supply and install 7/1.04mm Cu/PVC- 6sqmm earth wire lm 606.80

P-49 Supply and install 7/1.35mm Cu/PVC- 10sqmm earth wire lm 669.12

P-50 Supply and install 7/1.7mm Cu/PVC- 16sqmm earth wire lm 754.40

P-51 Supply and install 19/1.35mm Cu/PVC- 25sqmm earth wire lm 921.68

P-52 Replacing lamp holders no. 152.00

P-53 Replacing Florescent lamp 1200mm with shade no. 1,436.00

P-54 Replacing florescent lamp 600mm with plastic shade no. 1,420.00

P-55 Replacing CFL bulb - 20w ( spiral or globe) - with guarantee no. 484.00

P-56 Replacing 1/1.13 mm cables lm 72.00

P-57 Replacing 7/1.35 mm Cables (Double) lm 354.00

P-58 Conduit PVC - 3/4" laid in brick or con. Walls lm 325.00

P-59 Replace One Gang one way switch as per instruction no. 204.00

P-60 Replacing Two Gang one way switch as per instruction no. 294.00

P-61 Replacing Three Gang one way switch as per instruction no. 384.00

P-62 Replacing Four Gang one way switch as per instruction no. 484.00

P-63 Replacing Five Gang one way switch as per instruction no. 569.00

P-64 Replacing 5 Amp switchet socket outlet as per instruction no. 429.00

P-65 Replacing 13 Amp switchet socket outlet as per instruction no. 439.00

P-66 Replacing 15 Amp switchet socket outlet as per instruction no. 504.00

P-67 Replacing 40A 2 Pole isolater as per instruction no. 634.00

P-68 Replacing 40A 2 Pole RCCB as per instruction no. 2,478.00

P-69 Replacing Ceiling fan 56",(230V, 80W) according to no. 7,301.00

Engineers Approval & SLS certificate complete with regulator
and other fittings (Warranty period of 2 Years)

AC MACHINES
P-70 Supply and install wall mounted AC machine split type - 9000 no. 90,090.00
btu - (Engineers Approval) - with one year guarantee to all
and five year guarantee for compressor including free service
P-71 Supply and install wall mounted AC machine split type - no. 98,890.00
12000 btu - (Engineers Approval)- with one year guarantee to
all and five year guarantee for compressor including free
service

PROVINCIAL ENGINEERING DEPARTMENT 71

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
P-72 Supply and install wall mounted AC machine split type - no. 126,390.00
18000 btu -(Engineers Approval) - with one year guarantee to
all and five year guarantee for compressor including free
service
P-73 Supply and install wall mounted AC machine split type - no. 145,090.00
24000 btu - (Engineers Approval)- with one year guarantee to
all and five year guarantee for compressor including free
service

PROVINCIAL ENGINEERING DEPARTMENT 72

 Building Works Rate - 2016

Q - MISCELLANEOUS

Instructions
(a) Prior approval for the type of barbed wire should be taken from the Engineer before
using.

NO. DESCRIPTION METRIC

UNIT RATE
Q-1 Barbed wire fence on concrete posts - (height 1800mm) - lm 1,115.00
reinforced with 4 nos. 6mm bars, 2 supports on corner posts, 2
supports for mid of every 6 intervals and 7 nos. wire lines to
the accepted Engineering standard. (Posts should be fixed on a
concrete pad of 300x300x450mm) - Distance between two
posts 2400-3000mm

Q-2 Barbed wire fence on concrete posts - (height 2400mm) - lm 1,378.00

reinforced with 4 nos. 6mm bars, 2 supports on corner posts, 2
supports for mid of every 6 intervals and 9 nos. wire lines to
the accepted Engineering standard. (Posts should be fixed on a
concrete pad of 300x300x450mm) - Distance between two
posts 2400-3000mm

Q-3 Furnishing and fixing of fence post - (height 1800 mm, on a no. 1,546.00
concrete pad of 300x300x450mm, including necessary
excavation to the accepted Engineering standard

Q-4 Furnishing and fixing of fence post - (height 2400 mm), on a no. 1,858.00
concrete pad of 300x300x450mm including necessary
excavation to the accepted Engineering standard

Q-5 Fixing of barbed wire lines to the existing posts with lm 72.00
necessary hooks, bolts and nuts
Q-6 Furnishing, laying and fixing 300mm dia. RCC Hume pipes lm 3,529.00
with collars
Q-7 Furnishing, laying and fixing 450mm dia. RCC Hume pipes lm 5,697.00
with collars
Q-8 Furnishing, laying and fixing 600mm dia. RCC Hume pipes lm 7,275.00
with collars
Q-9 Supplying and pasting sand blast sticker on partition glasses m2 801.00
after cleaning surface.
Q-10 Supplying and fixing 200 x 200mm glass boxes on wall. no. 696.00

PROVINCIAL ENGINEERING DEPARTMENT 73

 Building Works Rate - 2016

R - Aluminium Work

Specifications

(a) All the Aluminium members used for work should have following properties

1. Temper - T5
2. Tensile Strength - 155 Mpa
3. Elongation - 7% (Minimum)
(b) Surface Treatment to be done to get following thicknesses

1. Anodizing - Coating Thickness - 10-15 Microns

2. Powder Coating - Coating Thickness - 60-80 Microns

(c) Glass should be float with thickness 5 mm

NO. DESCRIPTION METRIC

UNIT RATE
Anodized
R-1 Supply and fix Aluminium Sliding window with 5mm float sqm 9,512.00
glass, rubber beading stick with silicon gum Brown/Silver
Aluminium members complete to the accepted Engineering
standards

R-2 Supply and fix Aluminium Casement window with 5mm float sqm 12,325.00
glass, rubber beading stick with silicon gum Brown/Silver
Aluminium members complete to the accepted Engineering
standards
R-3 Supply and fix Aluminium window Fixed type, beading stick sqm 9,640.00
with silicon gum Brown/Silver Aluminium members
complete to the accepted Engineering standards
R-4 Supply and fix Aluminium Louvered frame, beading stick with sqm 14,135.00
silicon gum Brown/Silver Aluminium members complete to
the accepted Engineering standards
R-5 Supply and fix Aluminium Door with 5mm float glass on top sqm 13,073.00
and PVC coated 5mm plywood board at bottom, rubber
beading stick with silicon gum Brown/Silver Aluminium
members including tie rod and lock complete to the accepted
Engineering standards

R-6 Supply and fix Aluminium Door with 5mm float glass on top sqm 13,190.00
and 0.47 mm Zn-Al covered plywood board at bottom, rubber
beading stick with silicon gum Brown/Silver Aluminium
members including tie rod and lock complete to the accepted
Engineering standards

PROVINCIAL ENGINEERING DEPARTMENT 74

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
R-7 Supply and fix Aluminium Partition with 5mm float glass on sqm 5,721.00
top and PVC coated 5mm plywood board at bottom, rubber
beading stick with silicon gum Brown/Silver Aluminium
members complete to the accepted Engineering standards

R-8 Supply and fix Aluminium Partition with 5mm float glass sqm 7,946.00
rubber beading stick with silicon gum Brown/Silver
Aluminium members complete to the accepted Engineering
standards

R-9 Supply and fix Aluminium Partition with 5mm float glass on sqm 8,963.00
top and 0.47 mm Zn-Al covered plywood board at bottom,
rubber beading stick with silicon gum Brown/Silver
Aluminium members complete to the accepted Engineering
standards
Powder coated
R-10 Supply and fix Aluminium Sliding window with 5mm float sqm 10,325.00
glass, rubber beading stick with silicon gum Powder coated
Aluminium members complete to the accepted Engineering
standards

R-11 Supply and fix Aluminium Casement window with 5mm float sqm 13,565.00
glass, rubber beading stick with silicon gum Powder coated
Aluminium members complete to the accepted Engineering
standards

R-12 Supply and fix Alumimium window Fixed type, beading stick sqm 10,315.00
with silicon gum Powder coated Aluminium members
complete to the accepted Engineering standards

R-13 Supply and fix Aluminium Louvered frame, beading stick with sqm 15,916.00
silicon gum Powder coated Aluminium members complete to
the accepted Engineering standards

R-14 Supply and fix Aluminium Door with 5mm float glass on top sqm 15,320.00
and PVC coated 5mm plywood board at bottom, rubber
beading stick with silicon gum Powder coated Aluminium
members including tie rod and lock complete to the accepted
Engineering standards

R-15 Supply and fix Aluminium Door with 5mm float glass on top sqm 15,440.00
and 0.47 mm Zn-Al covered plywood board at bottom, rubber
beading stick with silicon gum Powder coated Aluminium
members including tie rod and lock complete to the accepted
Engineering standards

R-16 Supply and fix Aluminium Partition with 5mm float glass on sqm 6,050.00
top and PVC coated 5mm plywood board at bottom, rubber
beading stick with silicon gum Powder coated Aluminium
members complete to the accepted Engineering standards

PROVINCIAL ENGINEERING DEPARTMENT 75

 Building Works Rate - 2016

NO. DESCRIPTION METRIC

UNIT RATE
R-17 Supply and fix Aluminium Partition with 5mm float glass sqm 8,598.00
rubber beading stick with silicon gum Powder coated
Aluminium members complete to the accepted Engineering
standards

R-18 Supply and fix Aluminium Partition with 5mm float glass on sqm 9,616.00
top and 0.47 mm Zn-Al covered plywood board at bottom,
rubber beading stick with silicon gum Brown/Silver
Aluminium members complete to the accepted Engineering
standards
Aluminium ceiling
R-19 Aluminium ceiling with gypsum board of one side decorative sqm 2,208.00
and the other side Aluminium foil, fixed with 25x25x1mm
angles and 25mm concrete nails to the wall and, 25x25mm
main runners at 600mm c/c in one way and 25x25mm cross T
in the other way hanged on roof with binding wire as per the
instructions

PROVINCIAL ENGINEERING DEPARTMENT 76

 PRICE LIST - 2016
Labour
No. Item Unit Price (Rs.)
01 Special Skilled Labour Day 1,600.00
02 Skilled Labour Day 1,500.00
03 Semi Skilled Labour Day 1,300.00
04 Unskilled Labour Day 1,200.00

Plant
No. Item Unit Price (Rs.)
01 Concrete Mixer Day 4,000.00
02 Porker Vibrator Day 3,500.00

Construction Materials
No. Item Unit Size/Gauge Price (Rs.)
01 Cement - Incluiding 10km transport 50 kg. 900.00
02 Rubble 150-225 - excluding transport m3 990.00
03 Metal - 40mm - excluding transport m3 1,840.00
04 Metal - 32mm - excluding transport m3 1,945.00
05 Metal - 20mm - excluding transport m3 2,545.00
06 Engineering Brick - including 15 km transport 1000 Nos. 12,000.00
07 Lime - slaked, standard - excluding transport 20 kg 300.00
08 River sand - including transport m3 3,535.00
09 Earth - excluding transport m3 830.00
10 Gravel - excluding transport m3 850.00
11 Asbestos Corrugated Sheet 1 no 1.75 m 1,170.00
12 Asbestos Corrugated Sheet 1 no 2.5 m 1,650.00
13 Asbestos Corrugated Sheet 1 no 3.0 m 1,950.00
14 Asbestos Corrugated Sheet 1 no 3.5 m 2,350.00
15 Asbestos ceiling Sheet 1 no 1.2m x1.2m 530.00
16 Asbestos Ridging - 900mm 1 no 450.00
17 Cement sand hollow blocks, 400mmx100mmx200mm 1 no 40.00
18 Cement sand hollow blocks, 400mmx150mmx200mm 1 no 65.00
19 Cement sand solid blocks, 400mmx100mmx200mm 1 no 45.00
20 Cement sand solid blocks, 400mmx150mmx200mm 1 no 70.00
21 Calicut tiles - Including 10Km transport 1000 Nos. 36,700.00
22 Ridge tiles - Incluiding 10Km transport 1000 Nos. 53,000.00
23 Skim coat 20 kg 695.00
25 Glass pan - 5 mm sqm. 1,023.00
26 Paint brush - 150mm 1 no. 1,100.00

PROVINCIAL ENGINEERING DEPARTMENT 62

 27 Red cement 1kg 550.00

PROVINCIAL ENGINEERING DEPARTMENT 63

No. Item Unit Size/Gauge Price (Rs.)
28 Enamel Paint 1 ltr. 806.00
29 Emulsion Paint 1 ltr. 703.00
30 Weather shield Paint 1 ltr. 955.00
31 Anticorrosive Paint 1 ltr. 627.00
32 Wall filler 1 ltr. 260.00
33 Wood preservative - Black 1 ltr. 225.00
34 Wood preservative - Clear 1 ltr. 355.00
35 Floor paint 1 ltr. 975.00
36 Aluminum paint 1 ltr. 920.00
37 Reinforcement Steel -Tor (Including 10Km transport) 1 Ton 128,600.00
38 Reinforcement Steel -Mild (Including 10Km transport) 1 Ton 128,600.00
39 Barbed wire Lm 12.5 bwg 27.00
40 Binding wire 16 bwg 1 kg 177.00
41 25x25x5 mm Angle Iron 1m 310.00
42 40X40X5 mm Angle iron 1m 470.00
43 50X50X5 mm Angle iron 1m 509.00
45 65X65X6 mm Angle iron 1m 804.00
46 Zink alum colour sheet m2 1,023.00
47 Zink alum non-colour sheet m2 915.00
48 Zink alum ridging -colour 1m 554.00
49 Zink alum ridging - non colour 1m 478.00
50 Zink Alum gutter - colour 1m 518.00
51 Zink Alum gutter - non-colour 1m 464.00
52 Zink Alum down pipe -colour 1m 540.00
53 Zink Alum down pipe - non-colour 1m 461.00
54 Zink Alum gutter box - colour 1 no 670.00
55 Zink Alum gutter box - non-colour 1 no 595.00
56 Zink Alum wall flashing - colour 1m 580.00
57 Zink Alum wall flashing - non- colour 1m 496.00
58 Zink Alum roofing screws 1 no 13.00
59 Zink Alum valley gutter - colour 1m 554.00
60 Zink Alum valley gutter -non- colour 1m 478.00
61 AC Machine - split type - wall mounted - 9000btu 1 no 81,900.00
62 AC Machine - split type - wall mounted - 12000btu 1 no 89,900.00
63 AC Machine - split type - wall mounted - 18000btu 1 no 114,900.00
64 AC Machine - split type - wall mounted - 24000btu 1 no 131,900.00

PROVINCIAL ENGINEERING DEPARTMENT 64

No. Item Unit Size/Gauge Price (Rs.)

65 Plastishell water tanks - 10 years guarantee - 500 l 1 no 5,950.00

66 Plastishell water tanks - 10 years guarantee - 1000 l 1 no 12,500.00

67 Plastishell water tanks - 10 years guarantee - 2000 l 1 no 28,000.00

68 Plastishell water tanks - 10 years guarantee - 5000 l 1 no 62,500.00

69 Bathroom accessories set - Chromium plated (4pcs.) 1 no 4,750.00
70 Bathroom accessories set - Chromium plated (6pcs.) 1 no 4,950.00
71 Ball valve- 20mm 1 no 130.00
72 Ball valve- 25mm 1 no 225.00
73 Wash basin with pedestal - Chinese made 1 no 6,000.00
74 Water closet - Chinese made 1 no 17,750.00
75 2 PC set - Chinese made 1 no 19,500.00
76 Corner wash basin 1 no 2,950.00
77 Kitchen sink with drain board- stainless steel 1 no 3,150.00
78 Kitchen sink without drain board - stainless steel 1 no 2,675.00
79 Bidet shower - Chromium plated (Chinese made) 1 no 1,975.00
80 Bidet shower - Plastic 1 no 690.00
81 Urinal - bawl type 1 no 2,850.00
82 Chromium plated soap tray 1 no 450.00
83 Chromium plated towel bar 1 no 875.00
84 Chromium plated head shower 1 no 2,850.00
85 Chromium plated telephone shower 1 no 6,200.00
86 Squatting pan with foot rest 1 no 2,250.00
87 Bathroom mirror ( 400mmx500mm ) 1 no 3,575.00
88 Ceiling fan KDK or equivalent 1 no 6,000.00
89 Fluorescent lamp 600mm - single 1 no 1,100.00
90 Fluorescent lamp 1200mm - single 1 no 1,150.00
91 Fluorescent lamp 1200mm - double 1 no 1,300.00
92 CFL bulb 1 no 400.00
93 Lamp bracket type 1 no 1,300.00
94 5A socket outlet 1 no 345.00
95 13A socket outlet 1 no 350.00
96 15A socket outlet 1 no 420.00
97 Door closer 1 no 2,500.00
98 Plywood door - 2025x900mm 1 no 6,200.00
99 Mortise lock - Union 678-24-95CH 1 no 4,100.00
100 Switch lock - Bird 1 no 850.00
101 Concrete posts - 1.8m for fence 1 no 780.00
102 Concrete posts - 2.4m for fence 1 no 1,040.00

PROVINCIAL ENGINEERING DEPARTMENT 65

 RATES FOR
IRRIGATION WORKS

PROVINCIAL ENGINEERING DEPARTMENT 65

 Irrigation Works Rate - 2016

PROVINCIAL IRRIGATION DEPARTMENT - NCP

IRRIGATION WORK RATES
YEAR 2016
ISR DISCRIPTION METIRIC
NO
UNIT RATE
JUNGLE CLEARING BY MACHINERY

RN 1 Clearing & grubbing Heavy jungle including removing out side of the hec. 65,576.00
Reservation by machinery & burning .

RN 2 Clearing & grubbing Common jungle including removeng out side of the hec. 61,829.00
Reservation by machinery & burning .

RN 3 Clearing & grubbing Meduium jungle including removeng out side of the hec. 46,923.00
Reservation by machinery & burning .

RN 4 Clearing & grubbing Light jungle including removeng out side of the hec. 35,192.00
Reservation by machinery & burning .

RN 5 Clearing & grubbing Shrub jungle including removeng out side of the hec. 17,343.00
Reservation by machinery & burning .

JUNGLE CLEARING BY MANUAL LABOUR

RN 6 Clearing & grubbing Light jungle including removeng out side of the hec. 290,352.00
Reservation & burning by manual labour.

RN 7 Clearing & grubbing Secondary Growth jungle including removeng out side hec. 68,738.00
of the Reservation & burning by manual labour.

RN 8 Under Brshing by manual labour. hec. 36,294.00

STRIPPING BY MACHINERY
RN 9 stripping top soil to a depth of 3" to 6" to recive new earth & spoil to waste cut m2 5.00
hual 200 ft by machinery.
RN 10 stripping top soil to a depth of 3" to 6" to recive new earth & spoil to waste cut m2 24.00
hual 200 ft by machinery. Including Load & haul 0.25 mile (0.4 km)
( Transport by R.D. )
RN 11 stripping top soil to a depth of 3" to 6" to recive new earth & spoil to waste cut m2 26.00
hual 200 ft by machinery. Including Load & haul 0.5 mile (0.8 km)
( Transport by R.D. )
STRIPPING BY MANUAL LABOUR
RN 12 stripping top soil to a depth of 3" to 6" to recive new earth & spoil to waste m3 104.00
hual 100 ft by manual labour.
EARTH WORK BY MACHINARY ( TANK BUND FORMATION )
RN 13 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 269.00
damp including watering , compaction by machinery haul 100 ft (30m)

RN 14 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 387.00
damp including watering , compaction by machinery haul 0.25 mile (0.4 km)
( Transport by R.D. )

PROVINCIAL ENGINEERING DEPARTMENT 66

 Irrigation Works Rate - 2016

RN 15 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 413.00
damp including watering , compaction by machinery haul 0.5 mile(0.8 km).
( Transport by R.D. )

PROVINCIAL ENGINEERING DEPARTMENT 67

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 16 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 446.00
damp including watering , compaction by machinery haul 0.75 mile (1.2 km).
( Transport by R.D. )

RN 17 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 481.00
damp including watering , compaction by machinery haul 1.0 mile (1.6 km).
( Transport by R.D. )

RN 18 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 510.00
damp including watering , compaction by machinery haul 1.25 mile (2.0 km).
( Transport by R.D. )

EARTH WORK BY MANUAL LABOUR ( TANK BUND FORMATION )

RN 19 Earth excavation from borrow area cut & lift 5 ft placing & compaction earth in m3 1,485.00
damp including watering , compaction by manualy haul 100 ft (30m)

RN 20 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 1,524.00
dam including watering , compaction by manualy haul 0.5 mile (0.8 km) by T.T

RN 21 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 1,604.00
damp including watering , compaction by manualy haul 1.0 mile (1.6 km) by
T.T
RN 22 Earth excavation from borrow area cut & lift 3 ft placing & compaction earth in m3 1,671.00
damp including watering , compaction by manualy haul 1.5 mile ( 2.4 km) by
T.T
COMMON EARTH EXCAVATION & WASTE BY MACHINERY
RN 23 Common earth excavation & spoil to waste or fill material cut 3 ft lift up to 3 ft m3 170.00
spread 100 ft(30 m) by machinery (B - hoe)

RN 24 Common earth excavation & spoil to waste or fill material cut 3 -5 ft lift up to 5 m3 170.00
ft spread 100 ft(30 m) by machinery (B - hoe)

RN 25 Common earth excavation & spoil to waste or fill material cut 5 -10 ft lift up to m3 173.00
10 ft spread 100 ft(30 m) by machinery (B - hoe)

RN 26 Common earth excavation & spoil to waste or fill material cut 10 -15 ft lift up m3 177.00
to 15 ft spread 100 ft(30 m) by machinery (B - hoe)

RN 27 Common earth excavation & spoil to waste or fill material cut 15 -20 ft lift up m3 182.00
to 20 ft spread 100 ft(30 m) by machinery (B - hoe)

COMMON EARTH EXCAVATION & WASTE BY MANUAL LABOUR

RN 28 Common earth excavation & spoil to waste or fill material cut 3' lift up to 3 ft m3 1,297.00
spread 100 ft(30 m) by manual labour.
RN 29 Common earth excavation & spoil to waste or fill material cut 3'-5' lift up to 5 m3 1,526.00
ft spread 100 ft(30 m) by manual labour.
RN 30 Common earth excavation & spoil to waste or fill material cut 5'-10' lift up to m3 2,324.00
10 ft spread 100 ft(30 m) by manual labour.
COMMON EARTH EXCAVATION IN CANAL & WASTE BY
MACHINERY

PROVINCIAL ENGINEERING DEPARTMENT 68

 Irrigation Works Rate - 2016

RN 31 Common earth excavation & spoil to waste cut 3' lift up to 3 ft spread 100 ft(30 m3 170.00
m) by machinery (B - hoe)

PROVINCIAL ENGINEERING DEPARTMENT 69

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 32 Common earth excavation & spoil to waste cut 3'-5' lift up to 5 ft spread 100 m3 170.00
ft(30 m) by machinery (B - hoe)

RN 33 Common earth excavation & spoil to waste cut 5'-10' lift up to 10 ft spread 100 m3 173.00
ft(30 m) by machinery (B - hoe)

RN 34 Common earth excavation & spoil to waste cut 10'-15' lift up to 15 ft spread m3 177.00
100 ft(30 m) by machinery (B - hoe)

RN 35 Common earth excavation & spoil to waste cut 15'-20' lift up to 20 ft spread m3 182.00
100 ft(30 m) by machinery (B - hoe)

EARTH EXCAVATION IN CANAL & FORMING CANAL BUND BY

MACHINERY
RN 36 Earth excavation & forming canal bund cut 3FT lift up to 3 ft spread 100 ft(30 m3 247.00
m) by machinery (B - hoe).Including Watering & Compaction.

RN 37 Earth excavation & forming canal bund cut 3- 5 ft lift up to 5 ft spread 100 m3 247.00
ft(30 m) by machinery (B - hoe).Including Watering & Compaction.

RN 38 Earth excavation & forming canal bund cut 5 - 10 ft lift up to 10 ft spread 100 m3 250.00
ft(30 m) by machinery (B - hoe).Including Watering & Compaction.

RN 39 Earth excavation & forming canal bund cut 10 - 15 ft lift up to 15 ft spread 100 m3 254.00
ft(30 m) by machinery (B - hoe).Including Watering & Compaction.

RN 40 Earth excavation & forming canal bund cut 15 - 20 ft lift up to 20 ft spread 100 m3 257.00
ft(30 m) by machinery (B - hoe).Including Watering & Compaction.

EARTH EXCAVATION FROM BORROW & FORMING CANAL BUND

BY MACHINERY

RN 41 Earth excavation from borrow & placing watering & compating earth in canal m3 247.00
bund Cut 3 ft Lift up to 3 ft Spraed 100 ft by machinery.

RN 42 Earth excavation from borrow & placing watering & compating earth canal m3 365.00
bund Cut 3 ft Lift up to 3 ft haul 1/4 mile (0.4 Km ) by machinery ( Transport
by R.D. )
RN 43 Earth excavation from borrow & placing watering & compating earth canal m3 391.00
bund Cut 3 ft Lift up to 3 ft haul 1/2 mile (0.8 Km) by machinery ( Transport by
R.D. )
RN 44 Earth excavation from borrow & placing watering & compating earth canal m3 423.00
bund Cut 3 ft Lift up to 3 ft haul 3/4 mile (1.2 Km ) by machinery ( Transport
by R.D. )
RN 45 Earth excavation from borrow & placing watering & compating earth canal m3 459.00
bund Cut 3 ft Lift up to 3 ft haul 1.0 mile (1.6 Km ) by machinery ( Transport
by R.D. )

COMMON EARTH EXCAVATION IN CANAL & FORMING CANAL

BUND BY MANUAL LABOUR

PROVINCIAL ENGINEERING DEPARTMENT 70

 Irrigation Works Rate - 2016

RN 46 Common earth excavation in canal & forming canal bund cut 0 - 3 ft lift up to 5 m3 1,679.00
ft spread 100 ft(30 m) by manual labour

PROVINCIAL ENGINEERING DEPARTMENT 71

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 47 Common earth excavation in canal & forming canal bund cut 3 - 5 ft lift up to 5 m3 1,908.00
ft spread 100 ft(30 m) by manual labour
RN 48 Common earth excavation in canal & forming canal bund cut 5 - 10 ft lift up to m3 2,706.00
10 ft spread 100 ft(30 m) by manual labour
EARTH EXCAVATION FROM BORROW & FORMING CANAL BUND
BY MANUAL LABOUR
RN 49 Earth excavation from borrow & forming canal bund cut 3 ft lift up to 3 ft m3 1,246.00
spread 100 ft( 15 m) & compacting by manual labour , Haul 100 ft

RN 50 Earth excavation from borrow & forming canal bund cut 3 ft lift up to 3 ft m3 1,364.00
spread 50 ft( 15 m) & compacting by manual labour , Transport by RD.Haul 1/4
mile (0.4 Km )
RN 51 Earth excavation from borrow & forming canal bund cut 3 ft lift up to 3 ft m3 1,391.00
spread 50 ft( 15 m) & compacting by manual labour , Transport by RD.Haul 1/2
mile (0.8 Km )
RN 52 Earth excavation from borrow & forming canal bund cut 3 ft lift up to 3 ft m3 1,423.00
spread 50 ft( 15 m) & compacting by manual labour , Transport by RD.Haul 3/4
mile ( 1.2 Km )
RN 53 Earth excavation from borrow & forming canal bund cut 3 ft lift up to 3 ft m3 1,458.00
spread 50 ft( 15 m) & compacting by manual labour , Transport by RD.Haul 1.0
mile ( 1.6 Km )
CUT OPENING THE TANK BUND BY MACHINERY

RN 54 Earth excavation for cut opening the tank bund & dump at the site with back m3 357.00
filling 75 % excavated soil & 25% borrow earth including placing , watering &
compaction by machinery , Cut 5 - 10 ft lift up to 10 ft spread 100 ft.

CUT OPENING THE TANK BUND BY MANUALY

RN 55 Earth excavation for cut opening the tank bund & dump at the site with back m3 3,060.00
filling 75 % excavated soil & 25% borrow earth including placing , watering &
compaction by manual laibour , Cut 5 - 10 ft lift up to 10 ft spread 100 ft.

DESILTING IN CANAL BY MANUAL LABOUR

RN 56 Desilting in canal Bed & spoil to waste cut & lift 0 - 5 ft haul 100 ft (30m) by m3 1,038.00
manual labour.

WEEDING BY MANUAL LABOUR

RN 57 Weeding in Canals / Bunds by manual labour. hec. 9,040.00

DESILTING BY MACHINARY
RN 58 Desilting & spoil to waste cut & lift 0 - 5 ft haul 100 ft (30m) by Machinary. m3 112.00

RN 59 Desilting & spoil to waste cut & lift 0 - 10 ft haul 100 ft (30m) by Machinary. m3 113.00

PROVINCIAL ENGINEERING DEPARTMENT 72

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 60 Desilting & spoil to waste cut & lift 0 - 5 ft haul (0.4 km) ( Transport by R.D. m3 229.00
)
RN 61 Desilting & spoil to waste cut & lift 0 - 5 ft haul (0.8 km) ( Transport by R.D. m3 256.00
)
RN 62 Desilting & spoil to waste cut & lift 0 - 5 ft haul (1.2 km) ( Transport by R.D. m3 288.00
)
RN 63 Desilting & spoil to waste cut & lift 0 - 5 ft haul (1.6 km) ( Transport by R.D. m3 323.00
)
RN 64 Desilting & spoil to waste cut & lift 0 - 5 ft haul (2 km) ( Transport by R.D. ) m3 352.00

TURFING
RN 65 Furnishing placing & watering turf till take roots transport 1/2 mile by manual m2 206.00
labour.
RN 66 Furnishing placing & watering turf till take roots transport 1 mile by manual m2 213.00
labour.
GRAVELLING ON TANK BUND OR AGRI ROAD BY MACHINERY
TANSPORT BY FARM TRACTOR
RN 67 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 645.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 0.5 mile ( 0.8 Km ) by machinery ( Transport
by T.T.)

RN 68 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 724.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 1.0 mile ( 1.6 Km ) by machinery ( Transport by T.T.)

RN 69 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 791.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 1.5 mile ( 2.4 Km ) by machinery ( Transport by T.T.)

RN 70 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 899.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 2.0 mile ( 3.2 Km ) by machinery ( Transport by T.T.)

RN 71 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 951.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 2.5 mile ( 4.0 Km ) by machinery( Transport by T.T.)

RN 72 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 1,015.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 3.0 mile ( 4.8 Km ) by machinery( Transport by T.T.)

RN 73 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 1,099.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 3.5 mile ( 5.6 Km ) by machinery ( Transport by T.T.)

RN 74 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 1,161.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 4.0 mile ( 6.4 Km ) by machinery ( Transport by T.T.)

PROVINCIAL ENGINEERING DEPARTMENT 73

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 75 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 1,237.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 4.5 mile ( 7.2 Km ) by machinery ( Transport by T.T.)

RN 76 Gravel excavation & use as construction material cut 0 -5 ft lift up to 5 ft spred m3 1,329.00
100 ft including furnishing , placing , watering & compaction transport by farm
tractor haul 5.0 mile ( 8.0 Km ) by machinery ( Transport
by T.T.)

EARTH EXCAVATION FOR FOUNDATION BY MANUAL LABOUR

RN 77 Exacavation for foundation in any material except rock requiring blasing , ram , m3 1,038.00
and surplus disposed of within site as directed . Cut &fill 0 -5 ft by manual
labour.
RN 78 Exacavation for foundation in any material except rock requiring blasing, 50 % m3 1,186.00
part return fill in and ram , and surplus disposed of within site as directed . Cut
&fill 0 -5 ft by manual labour.
CONCRETE WORK
RN 79 Cement concrete Grade 15 (1:3:6 - 40mm-1 1/2" )mixing, hoisting placing in m3 16,348.00
position, packing temping including vibrating as directed , curing as specified
and stop pour construction joint etc.in irrigation structures.Excluding Form
Work. by manual labour.

RN 80 Cement concrete Grade 20 (1:2:4 - 20mm-3/4" )mixing, hoisting placing in m3 18,413.00

position, packing temping arround reinforcement including vibrating as
directed , curing as specified and stop pour construction joint etc.Making good
after removal off form work , in irrigation structures.Excluding Form Work.by
manual labour.

REINFORCEMENT
RN 81 MILD steel rods to the SLS standrds in reinfocing Supplying , Bending , Kg 257.00
Cutting , Fabrincation , Hoisting , and placing in position. And tied with G.I
wire as directed including Rolling margin , waste , all spacing , laps etc.in
reinforced steel other than design laps , Holding and supporting including
temporary fixing supports , hangers

RN 82 TOR steel rods to the SLS standrds in reinfocing Supplying , Bending , Kg 260.00
Cutting , Fabrincation , Hoisting , and placing in position. And tied with G.I
wire as directed including Rolling margin , waste , all spacing , laps etc.in
reinforced steel other than design laps

FORM WORK

RN 83 Ply Wood shuttering for irrigation structures including dismanteling m2 1,241.00

RN 84 Class III Timber shuttering for irrigation structures including dismanteling m2 1,030.00

RUBBLE MASONARY

RN 85 Randam rubble masonery in cement motar 1 : 5 m3 10,302.00

RN 86 9" thick pitching in 6" - 9 " rubble in 1 : 5 ct.mt. lift 0 - 5 ft haul. m3 7,545.00

PROVINCIAL ENGINEERING DEPARTMENT 74

 Irrigation Works Rate - 2016

RN 87 Dry rubble Packing (rubble size over 225mm)Haul 10 km m4 3,167.00

PROVINCIAL ENGINEERING DEPARTMENT 75

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RCC SPUN PIPE AND COLLARS IN STRUCTURES

RN 88 Supplying , Laying , Joining 4 " dia. Long Hume pipe. ( Including Transport & lm 1,460.00
loading , unloading )

RN 89 Supplying , Laying , Joining 6 " dia. Long Hume pipe.( Including Transport & lm 2,115.00
loading , unloading )
RN 90 Supplying , Laying , Joining 9 " dia. Long Hume pipe.( Including Transport & lm 2,621.00
loading , unloading )
RN 91 Supplying , Laying , Joining 12 " dia. Long Hume pipe.( Including Transport & lm 3,306.00
loading , unloading )
RN 92 Supplying , Laying , Joining 15 " dia. Long Hume pipe.( Including Transport & lm 3,716.00
loading , unloading )

RN 93 Supplying , Laying , Joining 18 " dia. Long Hume pipe.( Including Transport & lm 5,025.00
loading , unloading )

RN 94 Supplying , Laying , Joining 24 " dia. Long Hume pipe.( Including Transport & lm 6,285.00
loading , unloading )
RN 95 Supplying , Laying , Joining30 " dia. Long Hume pipe.( Including Transport & lm 9,729.00
loading , unloading )

RN 96 Supplying , Laying , Joining 36 " dia. Long Hume pipe.( Including Transport & lm 11,674.00
loading , unloading )

RN 97 Supplying , Laying , Joining 48 " dia. Long Hume pipe.( Including Transport & lm 18,524.00
loading , unloading )

LIGHT DUTY CAST IRON GATES FOR SLUICES

RN 98 Furniching and install in 6" dia. Cast iorn gates & hoist complete with spindle no. 24,379.00
etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )

RN 99 Furniching and install in 9" dia. Cast iorn gates & hoist complete with spindle no. 38,479.00
etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )

Furniching and install in 12" dia. Cast iorn gates & hoist complete with spindle no. 42,097.00
RN etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )
100

Furniching and install in 15" dia. Cast iorn gates & hoist complete with spindle no. 49,897.00
RN etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )
101

Furniching and install in 18" dia. Cast iorn gates & hoist complete with spindle no. 77,992.00
RN etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )
102

Furniching and install in 24" dia. Cast iorn gates & hoist complete with spindle no. 109,306.00
RN etc. P No C 501 -2 -6 D . ( Including Transport & loading , unloading )
103

PLASTERING

PROVINCIAL ENGINEERING DEPARTMENT 76

 Irrigation Works Rate - 2016

RN 1/2" thick rough cement plastering in 1:3 cement motar for rubble masonary m 568.00
2

104 faces for all lifts by manual labour.

PROVINCIAL ENGINEERING DEPARTMENT 77

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
CONSTRUCTION OF PUDDLE CORE WALL
RN 105 Earth work from borrow Puddle clay & construction of puddle clay wall m3 2,265.00
including watering & compaction by manual labour.Transport by F.T haul 1.0
mile ( 1.6 Km ).

RN 106 Earth Work from borrow Puddle clay & construction of puddle clay wall m4 2,091.00
including watering & compaction by manual labour Transport by F. T. haul 1/4
mile ( 0.40 Km. )

SOFT ROCK EXCAVATION BY MACHINERY

RN 107 Soft rock exacavation and spoil to waste , cut 0 -5 ft lift 5' spread 100' by m3 243.00
machinery

RN 108 Soft rock exacavation and spoil to waste , cut 5 -10 ft lift 10' spread 100' by m3 248.00
machinery

RN 109 Soft rock exacavation and spoil to waste,cut 10 -15 ft lift 15' spread 100' by m3 252.00
machinery

RN 110 Soft rock exacavation and spoil to waste,cut 15 -20 ft lift 20' spread 100' by m3 257.00
machinery

SOFT ROCK EXCAVATION BY MANUAL LABOUR

RN 111 Soft rock exacavation and spoil to waste , cut 0 -5 lift 5' spread 100' by manual m3 1,878.00
labour.

RN 112 Soft rock exacavation and spoil to waste , cut 5 -10 lift 10' spread 100' by m3 2,514.00
manual labour.

RN 113 Soft rock exacavation and spoil to waste,cut 10 -15 lift 15' spread 100' by m3 2,567.00
manual labour.

RN 114 Soft rock exacavation and spoil to waste,cut 15 -20 lift 20' spread 100' by m3 2,630.00
manual labour.

ROCK EXCAVATION BY MACHINERY

RN 115 Rock exacavation and spoil to waste / Quarry products cut 5 ft lift 5 ft by m3 894.00
machinery
RN 116 Rock exacavation and spoil to waste / Quarry products cut 5 - 10 ft lift 10 ft by m3 946.00
machinery
RN 117 Rock exacavation and spoil to waste / Quarry products cut 10 -15 ft lift 15 ft by m3 950.00
machinery
RN 118 Rock exacavation and spoil to waste / Quarry products cut 15 - 20 ft lift 20 ft m3 953.00
by machinery
ROCK EXCAVATION BY MANUALY

RN 119 Rock exacavation and spoil to waste / Quarry products cut 5 ft lift 5 ft by m3 1,974.00
manual labour.

PROVINCIAL ENGINEERING DEPARTMENT 78

 Irrigation Works Rate - 2016

RN 120 Rock exacavation and spoil to waste / Quarry products cut 5 -10 ft lift 10 ft by m3 2,610.00
manual labour.

PROVINCIAL ENGINEERING DEPARTMENT 79

 Irrigation Works Rate - 2016

ISR DISCRIPTION METIRIC

NO
UNIT RATE
RN 121 Rock exacavation and spoil to waste / Quarry products cut 10 -15 ft lift 15 ft by m3 2,663.00
manual labour.
RN 122 Rock exacavation and spoil to waste / Quarry products cut 15 - 20 ft lift 20 ft m3 2,725.00
by manual labour.

UNITS PRICES OF MATERIAL , LABOUR , & PLANT

MACHINE RATE

RN 123 Motor grader (120 - 140 H . P ) Clearing road plat form , reduceing high side hrs. 4,230.00
or cutting side drain of Agri - Road

RN 124 Hydrolic excavater cum back hoe 1.0 Cu. yd. hrs. 4,118.00
LAIBOUR RATES
RN 125 Un skiled laibour day 1,200.00
RN 126 Semi skiled laibour day 1,300.00

RN 127 Skiled grade 1 laibour ( Hevy equ. Oper. ) day 1,600.00

RN 128 Skiled grade 2 laibour ( Car. , Mason ) day 1,500.00
HALF ROUND CHANNELS PRICE
RN 129 12" dia, 8 ft Long Half Round Pipe no. 3,250.00

RN 130 15" dia, 8 ft Long Half Round Pipe no. 3,900.00

RN 131 18" dia, 8 ft Long Half Round Pipe no. 4,545.00
RN 132 24" dia, 8 ft Long Half Round Pipe no. 5,890.00

TIMBER -KUMBUK

RN 133 Timber 6" x 2" Planks , Class I 150 x 50 Kumbuk. Lm 1,182.00

RN 134 Timber 6" x 3" Planks , Class I 150 x 75 Kumbuk. Lm 1,843.00

PROVINCIAL ENGINEERING DEPARTMENT 80

 RATES FOR
MATERIAL TESTING

PROVINCIAL ENGINEERING DEPARTMENT 75

 Material Testing Rate - 2016

Material Testing Laboratory- Kekirawa

Rates for Material Tests for year 2016
No Name of the Test Rate per Test
1 Soil testing
1.1 Partical size distribution Rs. 1,400.00
1.2 Hydrometer analysis test Rs. 6,200.00
1.3 Consistency limits(LL,PL) Rs. 2,200.00
1.4 Specific gravity test Rs. 2,200.00
1.5 Moisture content test Rs. 475.00
1.6 Field density test Rs. 1,200.00
1.7 California Bearing Ratio test Rs. 4,000.00
1.8 Standard proctor compaction test Rs. 2,850.00
1.9 Modified proctor compaction test Rs. 3,200.00
1.10 Consolidation test Rs. 12,600.00
1.11 Mackintosh test- per point
Upto 2m depth Rs. 2,490.00
Upto 4m depth Rs. 3,700.00
Below 4m depth Rs. 6,800.00
1.12 Trial pits
1×1×1.5m Rs. 1,150.00
Additional 1m depth Rs. 2,010.00
1.13 Augering- per point
Upto 2m depth Rs. 665.00
Upto 4m depth Rs. 1,100.00
Below 4m depth Rs. 2,190.00

2 Concrete testing
2.1 Concrete cube test (for one sample)
Casted by laboratory staff Rs. 650.00
Casted by Consultant or Contractor Rs. 525.00
2.2 Rebound hammer test(NDT)(for 0.09m2 area) Rs. 750.00
2.3 PUNDIT test (per point) Rs. 880.00
2.4 Covermeter test (per 1m2) Rs. 2,125.00
2.5 Slump test Rs. 375.00
2.6 Concrete Mix Design- G20 Rs. 40,520.00
2.7 Concrete Mix Design- G25 Rs. 40,520.00
2.8 Concrete Mix Design- G30 Rs. 40,520.00

3 Aggregate testing
3.1 Particle size distribution Rs. 1,400.00
3.2 Flakiness index (Including sieve analysis test) Rs. 2,400.00
3.3 Elongation index (Including sieve analysis test) Rs. 2,400.00
3.4 Specific gravity and water absorbtion Rs. 2,010.00
3.5 Aggregate impact value Rs. 1,975.00
3.6 Aggregate crushing value Rs. 2,700.00

PROVINCIAL ENGINEERING DEPARTMENT 76

 Material Testing Rate - 2016

3.7 Ten percent fine value Rs. 2,700.00

3.8 Los Angeles Abrasion value Rs. 3,300.00

PROVINCIAL ENGINEERING DEPARTMENT 77

 Material Testing Rate - 2016

4 Blocks & Bricks testing(per sample)

4.1 Compressive strength of interlock blocks Rs. 500.00
4.2 Compressive strength of cement blocks-with capping Rs. 1,400.00
4.3 Compressive strength of cement blocks-without capping Rs. 500.00
4.4 Compressive strength of bricks Rs. 500.00
4.5 Dimension & water absorption of bricks Rs. 1,850.00

5 Cement testing
5.1 Setting times of cement Rs. 1,150.00
5.2 Cement strength test Rs. 1,150.00

6 Bituminous materials testing

6.1 Softening point test Rs. 1,500.00
6.2 Saybolt furol viscosity test Rs. 1,650.00
6.3 Distillation of cutback bitumen/emulsion test Rs. 2,650.00

7 Aluminium testing(per sample)

7.1 Powder coating thickness Rs. 285.00
7.2 Hardness Rs. 285.00
7.3 Sectional thickness Rs. 285.00

8 Measurement of pipes & steel bars (per sample) Rs. 150.00

Transport cost per 1km Rs. 35.00

PROVINCIAL ENGINEERING DEPARTMENT 78