Pinch valves VZQA

q/w Festo core product range qGenerally ready for shipping ex works in 24 hours
Covers 80% of your automation tasks Held in stock in 13 service centres worldwide
More than 2200 product
Look for the star!
Worldwide: Always in stock wGenerally ready for shipping ex works in 5 days
Superb: Festo quality at an attractive price Assembled for you in 4 service centres worldwide
Easy: Reduces procurement and storing complexity Up to 6 x 1012 variants per product series
Pinch valves VZQA
Key features

Application Design Areas of application

 The pinch valve is a 2/2-way valve  Easy-to-clean housing (clean  Filling systems Examples of operating media:
used to control liquid and powdery design)  Dosing and weighing systems  Granules
media, solids as well as a mixture  Open or closed in normal position  Powder coating systems  Powder
of substances.  Shut-off element made of elastomer  Suction and compressed air control  Dust
units  Liquids containing solids
 Pneumatic delivery systems  Fibrous products
 Sandblast systems  Highly viscous media
 Abrasive media
 Corrosive media
 Paste-like media

Function
The pinch valve is a 2/2-way valve of elastomer. The free passage minimum flow resistance and blocked or clogged.
with a tubular pinch sleeve made when the valve is opened ensures prevents the valve becoming
VZQA-C-M22C (normally closed) VZQA-C-M22U (normally open)

In the normal position, the pinch flow. When pressure is no longer In the normal position, the pinch sleeve or the pressure of the
valve is closed. The pinch valve applied, a spring closes the valve. valve is open. The pinch valve medium. The valve can be used to
sleeve opens when the valve is The valve can be used to shut off sleeve closes when the valve is shut off liquid and powdery media,
pressurised, releasing the material liquid and gaseous media. pressurised, shutting off the mater­ solids (granules) as well as a
ial flow. When pressure is no longer mixture of substances.
applied, the valve opens due to the
inherent stress of the pinch valve

-H- Note

The hermetic separation between it can escape. Any potential hazard suitable check valve, or suitable media circuit if the pinch valve
the media circuit and control circuit (e.g. due to aggressive or hot protection against return flow must sleeve fails. The media circuit must
is no longer guaranteed if wear media) must be ruled out. The com­ be integrated in the pilot line in the therefore be sized for the set
causes the pinch valve sleeve to pressed air supply to the control immediate vicinity of the media operating pressure. Any potential
leak. The flow medium can then get valve must be protected against the valve. Pilot medium can get into the hazard must be ruled out.
into the control circuit, from where ingress of the flow medium using a

2 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Product range overview

Version Type Nominal Process valve connection Flow rate Pilot air è Page/
width DN connection 12, Internet
max. permissible
screw-in depth
[m3/h]
Normally closed M22C
VZQA-C-M22C-… 6 G1/4 0.7 M3, 3 mm 6
1/4 NPT
Clamp ferrule to DIN 32676, series A
Clamp ferrule to ASME-BPE, type A

VZQA-C-M22C-… 15 G1/2 5 M5, 5 mm 6

1/2 NPT
Clamp ferrule to DIN 32676, series A
Clamp ferrule to ASME-BPE, type A

Normally open M22U

VZQA-C-M22U-… 6 G1/4 0.7 M5, 4.5 mm 9
1/4 NPT
Clamp ferrule to DIN 32676, series A
Clamp ferrule to ASME-BPE, type A

VZQA-C-M22U-… 15 G1/2 5 G1/8, 5 mm 9

1/2 NPT
Clamp ferrule to DIN 32676, series A
Clamp ferrule to ASME-BPE, type A

VZQA-C-M22U-… 25 G1 18 G1/8, 6 mm 9
1 NPT
Clamp ferrule to DIN 32676, series A
Clamp ferrule to ASME-BPE, type A
Clamp ferrule to ASME-BPE, type B

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 3

Pinch valves VZQA
Peripherals overview

9
aJ

Accessories Description è Page/Internet

Basic body 6
1 VZQA-C-M22C  Normally closed
 "Stainless steel housing material" variant
2 VZQA-C-M22C  Normally closed
 "Aluminium housing material" variant (always with T-slots)
 Integrated ring magnet only available when "End-position sensing type" is selected
3 Basic body Normally open 9
VZQA-C-M22U
4 Connection 1 Various connections are available: –
 G female thread
 NPT female thread
 Clamp ferrule DIN 32676, series A
 Clamp ferrule ASME-BPE, type A
 Clamp ferrule ASME-BPE, type B
5 Connection 2 Various connections are available: –
 G female thread
 NPT female thread
 Clamp ferrule DIN 32676, series A
 Clamp ferrule ASME-BPE, type A
 Clamp ferrule ASME-BPE, type B
Proximity sensors for T-slot 14
6 SME-8 Magnetic reed, insertable in the slot lengthwise
7 SME-8M Magnetic reed, insertable in the slot from above
8 SMT-8M Magnetoresistive, insertable in the slot from above, to EU Explosion Protection Directive
9 SMT-8G Magnetoresistive, insertable in the slot lengthwise
aJ Slot cover To protect the sensor cables and slots from contamination 15
ABP-5-S

4 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Type codes

VZQA – C – M22U – 6 – G G – V4 V4 N – 4 – E

Type
VZQA Pinch valve, pneumatically actuated

Product version
C Easy-to-clean design

Valve function
M22C 2/2-way valve, normally closed
M22U 2/2-way valve, normally open

Nominal diameter DN
6 6 mm
15 15 mm
25 25 mm

Process valve connection type 1

G G female thread
T NPT female thread
S1 Clamp ferrule to ASME-BPE, type A
S5 Clamp ferrule to DIN 32676, series A
S12 Clamp ferrule to ASME-BPE, type B

Process valve connection type 2

G G female thread
T NPT female thread
S1 Clamp ferrule to ASME-BPE, type A
S5 Clamp ferrule to DIN 32676, series A
S12 Clamp ferrule to ASME-BPE, type B

Housing material
AL Aluminium
V2 Stainless steel (chrome-nickel, austenitic)
V4 Stainless steel (chrome-nickel-molybdenum,
austenitic)

Housing cover material

Al Aluminium
V4 Stainless steel (chrome-nickel-molybdenum,
austenitic)
POM Polyoxymethylene

Shut-off element material

E EPDM
N NBR
S1 Silicone

Pressure range of media

4 0 … 4 bar
6 0 … 6 bar

Sensing type
– None
E End positions

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 5

Pinch valves VZQA
Technical data M22C

Function

General technical data

Nominal width DN 6 15
Process valve nominal pressure PN 10
Design Pinch valve, pneumatically actuated
Actuation type Pneumatic
Sealing principle Soft
Mounting position Any
Valve function 2/2-way, closed, monostable
Flow direction Reversible
Reset method Mechanical spring
Type of control Externally controlled
Type of mounting In-line installation
Auxiliary pilot air connection 12 M3 M5
Switching time on [ms] 125 150
Switching time off [ms] 125 250
Flow rate Kv [m3/h] 0.7 5
Max. viscosity [mm2/s] 4000

Operating and environmental conditions

Nominal width DN 6 15
Operating pressure [bar] 3.5 … 6
Burst pressure [bar] 16
Pressure of medium [bar] 0…4 0…6
Ambient temperature [°C] –5 … +60
Temperature of medium [°C] –15 … +50 –5 … +100
Storage temperature [°C] 6…8
Food-safe1) See supplementary material information
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:1]
Medium Compressed air to ISO 8573-1:2010 [-:-:1]
Water

1) Additional information www.festo.com/sp è Certificates.

Materials Material number

Housing
V2V4 High-alloy stainless steel 1.4301
ALV4 Wrought aluminium alloy –
Housing cover High-alloy stainless steel 1.4435
Bowl PA6
Seals FPM
Shut-off element EPDM
Note on materials RoHS-compliant
Contains PWIS (paint-wetting impairment substances)

6 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Technical data M22C

Dimensions Download CAD data è www.festo.com

Illustration – connection 1: clamp ferrule to DIN 32676, series A; connection 2: G1/2

1 Connection 1
2 Connection 2
3 Sensor slot

Process valve D1 Material D4 D6 L2 L3 L4 L5 L6 T1 ß2

connection Housing 
Nominal width DN6
G G1/4 V2 33.6 M3 47.2 10.9 10.9 4.8 4.8 12 32
T 1/4 NPT 10.9 10.9 4.8 4.8 10
S5 DIN 32676, series A 24 24 17.9 17.9 –
S1 ASME-BPE, type A 24 24 17.9 17.9 –

Nominal width DN15

G G1/2 V2 52.4 M5 69.5 12.8 12.8 6.6 6.6 14 50
AL 55 12.8 12.8 6.6 6.6
T 1/2 NPT V2 52.4 12.8 12.8 6.6 6.6
AL 55 12.8 12.8 6.6 6.6
S5 DIN 32676, series A V2 55 30.3 30.3 24 24
S1 ASME-BPE, type A V2 55 30.3 30.3 24 24

Process valve combinations L1

Nominal width DN6
GG 69
GT, TT, TG 69
S1S1, S1S5, S5S5, S5S1 95.1
S1G, S1T, GS1, TS1, S5G, S5T, GS5, TS5 82.1

Nominal width DN15

GG 95
GT, TT, TG 95
S1S1, S1S5, S5S5, S5S1 130
S1G, S1T, GS1, TS1, S5G, S5T, GS5, TS5 112.5

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 7

 -V- New

Pinch valves VZQA

Technical data M22C

qCore product range

Ordering data
Pinch valves Nominal Process valve connection Material Weight Part no. Type
width DN shut-off
element [g]
15 G1/2 EPDM 536 q3412426 VZQA-C-M22C-15-GG-V2V4E-6
Clamp ferrule to DIN 32676, 666 q3412424 VZQA-C-M22C-15-S5S5-V2V4E-6
series A

With integrated ring magnet for sensing the end positions

15 Clamp ferrule to DIN 32676, EPDM 607 q3412425 VZQA-C-M22C-15-S5S5-ALV4E-6-E
series A

Ordering data
Pinch valves Nominal Process valve connection Material Weight Part no. Type
width DN shut-off
element [g]
6 G1/4 EPDM 253 8091739 VZQA-C-M22C-6-GG-V2V4E-4 -V-

1/4 NPT 253 4748311 VZQA-C-M22C-6-TT-V2V4E-4 -V-

6 Clamp ferrule to DIN 32676, EPDM 302 8079858 VZQA-C-M22C-6-S1S1-V2V4E-4 -V-

series A
Clamp ferrule to ASME-BPE, type A 311 8079857 VZQA-C-M22C-6-S5S5-V2V4E-4 -V-

Ordering data
Seal cartridge Nominal Storage Shut-off element Note on materials Part no. Type
width DN temperature material
[°C]
15 6…8 EPDM RoHS-compliant 3418619 VAVC-Q2-M22C-15-E

Festo core product range qGenerally ready for shipping ex works in 24 hours
wGenerally ready for shipping ex works in 5 days

8 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Technical data M22U

Function

General technical data

Nominal width DN 6 15 25
Process valve nominal pressure PN 10
Design Pinch valve, pneumatically actuated
Actuation type Pneumatic
Sealing principle Soft
Mounting position Any
Valve function 2/2-way, open, monostable
Flow direction Reversible
Reset method Rebound resilience
Type of control Externally controlled
Type of mounting In-line installation
Auxiliary pilot air connection 12 M5 G1/8 G1/8
Switching time on [ms] 125 250 250
Switching time off [ms] 125 250 250
Flow rate Kv [m3/h] 0.7 5 18
Max. viscosity [mm2/s] 4000

Materials
VZQA-C-M22U-… V4V4 ALAL ALV4 ALPOM
Housing High-alloy stainless Wrought aluminium alloy
steel
Housing cover High-alloy stainless Wrought aluminium High-alloy stainless POM
steel alloy steel
Bowl PA6
Seals FPM
Note on materials
For shut-off element NBR, EPDM or VMQ RoHS-compliant
For shut-off element VMQ Contains PWIS (paint-wetting impairment substances)

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 9

Pinch valves VZQA
Technical data M22U

Operating and environmental conditions

Nominal width DN 6 15 25
Operating pressure [bar] 1 … 6.5
Overload pressure [bar] 7.8
Pressure of medium [bar] 0…4
Differential pressure
For shut-off element NBR or EPDM [bar] 2.5 2.5 2.5
For shut-off element VMQ [bar] 2.5 2.5 3
Burst pressure [bar] 16
Ambient temperature [°C] –5 … +60
Temperature of medium
For shut-off element NBR [°C] –5 … +60
For shut-off element EPDM [°C] –5 … +100
For shut-off element VMQ [°C] –5 … +150
Storage temperature
For shut-off element NBR or EPDM [°C] 6…8
For shut-off element VMQ [°C] 0 … 25
Food-safe
For shut-off element EPDM See supplementary material information1)
For shut-off element NBR or VMQ See declaration of conformity
Pilot medium
For shut-off element EPDM Compressed air to ISO 8573-1:2010 [7:4:1]
For shut-off element NBR or VMQ Compressed air to ISO 8573-1:2010 [7:4:4]
Medium
For shut-off element EPDM Compressed air to ISO 8573-1:2010 [-:-:1]
Water
For shut-off element NBR or VMQ Compressed air to ISO 8573-1:2010 [-:-:-]

1) Additional information www.festo.com/sp è Certificates.

10 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Technical data M22U

Dimensions Download CAD data è www.festo.com

Illustration – connection 1: clamp ferrule to DIN 32676, series A; connection 2: G1/2

1 Connection 1
2 Connection 2

Process valve D1 Material D2 D3 D4 L2 L3 L4 T1 ß1 ß2

connection housing cover  
Nominal width DN6
G G1/4 V4, AL M5 9 24 49 8 8 12 22 22
T 1/4 NPT V4, AL 8 8
S5 DIN 32676, series A V4 23 23
S1 ASME-BPE, type A V4 23 23

Nominal width DN15

G G1/2 V4, AL G1/8 15 38 81 7 7 14 36 36
POM 12 12
T 1/2 NPT V4, AL 7 7
POM 12 12
S5 DIN 32676, series A V4 24.5 24.5
S1 ASME-BPE, type A V4 24.5 24.5

Nominal width DN25

G G1 V4, AL G1/8 15 58 109 10.5 10.5 18 55 55
POM 15.5 15.5
T 1 NPT V4, AL 10.5 10.5
POM 15.5 15.5
S5 DIN 32676, series A V4 28 28
S1 ASME-BPE, type A V4 28 28
S12 ASME-BPE, type B V4 28 28

Process valve combinations L1

Nominal width DN6 Nominal width DN15 Nominal width DN25
GG, GT, TT, TG made of V4 or AL 65 95 130
GG, GT, TT, TG made of POM – 105 140
GG, GT, TT, TG made of V4 or AL with POM – 100 135
S1S1, S1S5, S5S5, S5S1, S1S12, S12S1, S5S12, S12S5, 80 130 165
S12S12
S1G, S1T, GS1, TS1, S5G, S5T, GS5, TS5, S12G, S12T, GS12, 95 112.5 147.5
TS12

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 11

Pinch valves VZQA
Technical data M22U

Ordering data
Pinch valves Nominal Process valve connection Material Weight Part no. Type
width shut-off element
DN [g]
6 G1/4 NBR 105.5 2931679 VZQA-C-M22U-6-GG-ALV4N-4
EPDM 157 2931678 VZQA-C-M22U-6-GG-V4V4E-4
Silicone 157 2931683 VZQA-C-M22U-6-GG-V4V4S1-4
1/4 NPT Silicone 157 2931685 VZQA-C-M22U-6-TT-V4V4S1-4
Clamp ferrule to DIN 32676, EPDM 215 2931681 VZQA-C-M22U-6-S5S5-V4V4E-4
series A Silicone 215 2931682 VZQA-C-M22U-6-S5S5-V4V4S1-4
Clamp ferrule to ASME-BPE, type A Silicone 195 2931684 VZQA-C-M22U-6-S1S1-V4V4S1-4
15 G1/2 NBR 431 3022830 VZQA-C-M22U-15-GG-V4V4N-4
NBR 265 3022831 VZQA-C-M22U-15-GG-ALV4N-4
NBR 158 3022832 VZQA-C-M22U-15-GG-ALPOMN-4
EPDM 431 3022829 VZQA-C-M22U-15-GG-V4V4E-4
Silicone 431 3022835 VZQA-C-M22U-15-GG-V4V4S1-4
1/2 NPT Silicone 431 3022838 VZQA-C-M22U-15-TT-V4V4S1-4
Clamp ferrule to DIN 32676, EPDM 559 3022833 VZQA-C-M22U-15-S5S5-V4V4E-4
series A Silicone 559 3022834 VZQA-C-M22U-15-S5S5-V4V4S1-4
Clamp ferrule to ASME-BPE, type A Silicone 495 3022837 VZQA-C-M22U-15-S1S1-V4V4S1-4
25 G1 EPDM 1178 3968922 VZQA-C-M22U-25-GG-V4V4E-4
EPDM 480 3968923 VZQA-C-M22U-25-GG-ALALE-4
Silicone 1178 3968926 VZQA-C-M22U-25-GG-V4V4S1-4
1 NPT Silicone 1178 3968928 VZQA-C-M22U-25-TT-V4V4S1-4
Clamp ferrule to DIN 32676, EPDM 1474 3968924 VZQA-C-M22U-25-S5S5-V4V4E-4
series A Silicone 1474 3968925 VZQA-C-M22U-25-S5S5-V4V4S1-4
Clamp ferrule to ASME-BPE, type B Silicone 1516 3968927 VZQA-C-M22U-25-S12S12-V4V4S1-4

Ordering data
Seal cartridge Nominal Material Storage Note on materials Food-safe Part no. Type
width shut-off element temperature
DN [°C]
6 NBR 6…8 – RoHS- – 2392881 VAVC-Q2-M22U-6-N
EPDM compliant 1) 2392882 VAVC-Q2-M22U-6-E
VMQ (silicone) 0 … 25 Contains PWIS 2) 2392883 VAVC-Q2-M22U-6-S1
(paint-wetting
impairment
substances)
15 NBR 6…8 – – 3019151 VAVC-Q2-M22U-15-N
EPDM 1) 3019148 VAVC-Q2-M22U-15-E
VMQ (silicone) 0 … 25 Contains PWIS 2) 3019144 VAVC-Q2-M22U-15-S1
(paint-wetting
impairment
substances)
25 NBR 6…8 – – q3970092 VAVC-Q2-M22U-25-N
EPDM – 3970093 VAVC-Q2-M22U-25-E
VMQ (silicone) 0 … 25 Contains PWIS 2) 3970094 VAVC-Q2-M22U-25-S1
(paint-wetting
impairment
substances)

1) See supplementary material information

Additional information www.festo.com/sp è Certificates.
2) See declaration of conformity

Festo core product range qGenerally ready for shipping ex works in 24 hours
wGenerally ready for shipping ex works in 5 days

12 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Ordering data – Modular product system

Ordering table
VZQA-C-… M22C M22U Conditions Code Enter
code
0
M Module no. 3174282 2037881
Product type Pinch valve VZQA VZQA
Version Easy-to-clean design -C -C
Valve function 2/2-way valve, normally closed – -M22C
– 2/2-way valve, normally open -M22U
Nominal diameter DN 6 -6
15 -15
– 25 -25
Process valve connection type 1 G female thread -G
Clamp ferrule to ASME-BPE, type A 14 -S1
Clamp ferrule to DIN 32676, series A 1 -S5
NPT female thread -T
Clamp ferrule to ASME-BPE, type B 1 3 4 6 -S12
Process valve connection type 2 G female thread G
Clamp ferrule to ASME-BPE, type A 14 S1
Clamp ferrule to DIN 32676, series A 1 S5
NPT female thread T
Clamp ferrule to ASME-BPE, type B 1 3 4 6 S12
Housing material Aluminium -AL
Stainless steel – -V2
(chrome-nickel, austenitic)
– Stainless steel -V4
(chrome-nickel-molybdenum,
austenitic)
Housing cover material Aluminium AL
– Polyoxymethylene 3 POM
Stainless steel (chrome-nickel-molybdenum, austenitic) V4
Shut-off element material EPDM E
– NBR N
– Silicone S1
Pressure range of media [bar] 0…4 7 -4
0…6 – 3 -6
0
O Sensing type None –
End positions – 25 -E

1 S1, S5, S12 Only in combination with housing cover material V4 (stainless steel)
2 E Only in combination with valve function M22C
3 POM, S12, 6 Not in combination with nominal diameter DN6
4 S1, S12 Not in combination with nominal diameter DN25 with valve function M22C
5 E Not in combination with housing material V2 (stainless steel)
6 S12 Not in combination with nominal diameter DN15
7 4 Not in combination with nominal diameter DN15 with valve function M22C

M Mandatory data
O Options

Transfer order code

VZQA – C – – – – – –

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 13

Pinch valves VZQA
Accessories

Ordering data – Proximity sensors for T-slot, magnetoresistive Technical data è Internet: smt-8
Switching output Electrical connection Cable length Part no. Type
Cable Cable with plug, rotatable thread
M8x1 M12x1 [m]
N/O contact
PNP – 3-pin – 0.3 q574334 SMT-8M-A-PS-24V-E-0,3-M8D
3-wire – – 2.5 q574335 SMT-8M-A-PS-24V-E-2,5-OE
3-wire – – 5 q574336 SMT-8M-A-PS-24V-E-5,0-OE
– – 3-pin 0.3 q574337 SMT-8M-A-PS-24V-E-0,3-M12
NPN 3-wire – – 2.5 q574338 SMT-8M-A-NS-24V-E-2,5-OE
– 3-pin – 0.3 q574339 SMT-8M-A-NS-24V-E-0,3-M8D
To EU Explosion Protection Directive (ATEX)
Non-contacting 2-wire – – 5 q574341 SMT-8M-A-ZS-24V-E-5,0-OE-EX2
PNP – 3-pin – 0.3 574342 SMT-8M-A-PS-24V-E-0,3-M8D-EX2

N/O contact, corrosion resistant

PNP 3-wire – – 5 574380 CRSMT-8M-PS-24V-K-5,0-OE
3-wire – – 10 574381 CRSMT-8M-PS-24V-K-10,0-OE

PNP – – 3-pin 0.3 574382 CRSMT-8M-PS-24V-K-0,3-M12

– 3-pin – 0.3 574383 CRSMT-8M-PS-24V-K-0,3-M8D

N/C contact
PNP 3-wire – – 7.5 q574340 SMT-8M-A-PO-24V-E-7,5-OE

Switchable
PNP/NPN – 3-pin – 0.3 574343 SMT-8M-A-PNS-24V-E-0,3-M8D
PNP PS/PO – 3-pin – 0.3 574344 SMT-8M-A-PSO-24V-E-0,3-M8D

Ordering data – Proximity sensors for T-slot, magnetic reed Technical data è Internet: sme-8
Switching output Electrical connection Cable length Part no. Type
Cable Cable with plug, rotatable thread
M8x1 [m]
N/O contact
Contacting, – 3-pin 0.3 q543861 SME-8M-DS-24V-K-0,3-M8D
bipolar 3-wire – 2.5 q543862 SME-8M-DS-24V-K-2,5-OE
3-wire – 5 q543863 SME-8M-DS-24V-K-5,0-OE
2-wire – 2.5 q543872 SME-8M-ZS-24V-K-2,5-OE
3-wire – 7.5 543876 SME-8M-DS-24V-K-7,5-OE

N/C contact
Contacting, 3-wire – 7.5 q546799 SME-8M-DO-24V-K-7,5-OE
bipolar

Festo core product range qGenerally ready for shipping ex works in 24 hours
wGenerally ready for shipping ex works in 5 days

14 è Internet: www.festo.com/catalogue/... Subject to change – 2019/04

Pinch valves VZQA
Accessories

Ordering data – Proximity sensors for T-slot, magnetoresistive Technical data è Internet: smt-8
Switching output Electrical connection Cable length Part no. Type
Cable Plug M8x1 [m]
N/O contact
PNP 3-wire – 2.5 547859 SMT-8G-PS-24V-E-2,5Q-OE
– 3-pin 0.3 547860 SMT-8G-PS-24V-E-0,3Q-M8D
PNP – 3-pin – 562019 SMT-8-SL-PS-LED-24-B

Ordering data – Proximity sensors for T-slot, magnetic reed Technical data è Internet: sme-8
Switching output Electrical connection Cable length Part no. Type
Cable Plug M8x1 [m]
N/O contact
Contacting, bipolar 3-wire – 2.5 150855 SME-8-K-LED-24
3-wire – 5.0 175404 SME-8-K5-LED-24
3-wire – 7.5 530491 SME-8-K-7,5-LED-24
– 3-pin 0.3 150857 SME-8-S-LED-24
2-wire – 2.5 171169 SME-8-ZS-KL-LED-24
Contacting, bipolar – 3-pin – 526622 SME-8-SL-LED-24

Contacting, bipolar, heat-resistant 2-wire – 2.5 161756 SME-8-K-24-S6

Contacting, bipolar, operating 2-wire – 2.5 152820 SME-8-K-LED-230

voltage range up to 230 V AC/DC

Contacting, bipolar 3-wire – 1 562515 SME-8-FM-DS-24V-K-1,0-OE

2-wire – 1 562516 SME-8-FM-ZS-24V-K-1,0-OE

N/C contact
Contacting, bipolar 3-wire – 7.5 160251 SME-8-O-K-LED-24

Ordering data – Slot cover for T-slot

Mounting Length Part no. Type
[m]
Insertable 2x 0.5 151680 ABP-5-S

2019/04 – Subject to change è Internet: www.festo.com/catalogue/... 15