Scribd
Upload
111 views1 page

Table 3.1 Stress and Deformation Characteristics For Concrete

This document provides a table summarizing the analytical relationships used to determine various stress and deformation characteristics for concrete of different compressive strengths. The table lists the characteristic compressive cylinder strength (fck,cube), mean compressive strength (fcm), mean tensile strength (fctm), 5% fractile tensile strength (fctk,0.05), 95% fractile tensile strength (fctk,0.95), elastic modulus (Ecm), and strains (εc1, εcu1, εc2, εcu2, εc3, εcu3, n) for concrete classes ranging from 12 to 90 MPa compressive strength. Formulas are provided

Uploaded by

Dong-Yong Kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views1 page

Table 3.1 Stress and Deformation Characteristics For Concrete

This document provides a table summarizing the analytical relationships used to determine various stress and deformation characteristics for concrete of different compressive strengths. The table lists the characteristic compressive cylinder strength (fck,cube), mean compressive strength (fcm), mean tensile strength (fctm), 5% fractile tensile strength (fctk,0.05), 95% fractile tensile strength (fctk,0.95), elastic modulus (Ecm), and strains (εc1, εcu1, εc2, εcu2, εc3, εcu3, n) for concrete classes ranging from 12 to 90 MPa compressive strength. Formulas are provided

Uploaded by

Dong-Yong Kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Strength classes for concrete Analytical relation

/ Explanation

fck (MPa) 12 16 20 25 30 35 40 45 50 55 60 70 80 90

fck,cube 15 20 25 30 37 45 50 55 60 67 75 85 95 105
(MPa)
fcm 20 24 28 33 38 43 48 53 58 63 68 78 88 98 fcm = fck+8(MPa)
(MPa)
fctm 1,6 1,9 2,2 2,6 2,9 3,2 3,5 3,8 4,1 4,2 4,4 4,6 4,8 5,0 fctm=0,30×fck(2/3) ≤C50/60
(MPa) fctm=2,12·In(1+(fcm/10))
> C50/60

fctk, 0,05 1,1 1,3 1,5 1,8 2,0 2,2 2,5 2,7 2,9 3,0 3,1 3,2 3,4 3,5 fctk;0,05 = 0,7×fctm
(MPa) 5% fractile

fctk,0,95 2,0 2,5 2,9 3,3 3,8 4,2 4,6 4,9 5,3 5,5 5,7 6,0 6,3 6,6 fctk;0,95 = 1,3×fctm
(MPa) 95% fractile

Ecm 27 29 30 31 32 34 35 36 37 38 39 41 42 44 Ecm = 22[(fcm)/10]0,3


(fcm in MPa)
(GPa )
1,8 1,9 2,0 -2,1 2,2 2,25 2,3 2,4 2,45 2,5 2,6 2,7 2,8 2,8 see Figure 3.2
εc1 (‰) εc1 (0/00) = 0,7 fcm0,31 < 2.8

3,5 3,2 3,0 2,8 2,8 2,8 see Figure 3.2


εcu1 (‰) for fck ≥ 50 Mpa
εcu1(0/00)=2,8+27[(98-fcm)/100]4
4

2,0 2,2 2,3 2,4 2, 5 2,6 see Figure 3.3


εc2 (‰) for fck ≥ 50 Mpa
εc2(0/00)=2,0+0,085(fck-50)0,53

3,5 3,1 2,9 2,7 2,6 2,6 see Figure 3.3


εcu2 (‰) for fck ≥ 50 Mpa
εcu2(0/00)=2,6+35[(90-fck)/100]4
Table 3.1 Stress and deformation characteristics for concrete

n 2,0 1,75 1,6 1,45 1,4 1,4 for fck≥ 50 Mpa


n=1,4+23,4[(90- fck)/100]4

εc3 (‰) 1,75 1,8 1,9 2,0 2,2 2,3 see Figure 3.4
for fck≥ 50 Mpa
εc3(0/00)=1,75+0,55[(fck-50)/40]

εcu3 (‰) 3,5 3,1 2,9 2,7 2,6 2,6 see Figure 3.4
for fck ≥ 50 Mpa
εcu3(0/00)=2,6+35[(90-fck)/100]4
prEN 1992-1-1 (Draft for Stage 49)
Page 29

Ref. No. prEN 1992-1-1 (July 2002)

You might also like