Scribd
Upload
63 views1 page

Kinetic Energy Recovery System Using A Flywheel in Bicycle: Components

This document describes a kinetic energy recovery system that uses a flywheel on a bicycle. The system stores energy normally lost during braking in the flywheel, and then reuses that stored energy to help propel the rider when starting or accelerating. The flywheel is designed to be compatible with the bicycle frame and rider. It allows the rider to charge the flywheel while going downhill and get a boost going back uphill. The system focuses on the mass of the flywheel and redesigning it so that braking energy is stored and then used to push start the bicycle.

Uploaded by

Sreehari H
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
63 views1 page

Kinetic Energy Recovery System Using A Flywheel in Bicycle: Components

This document describes a kinetic energy recovery system that uses a flywheel on a bicycle. The system stores energy normally lost during braking in the flywheel, and then reuses that stored energy to help propel the rider when starting or accelerating. The flywheel is designed to be compatible with the bicycle frame and rider. It allows the rider to charge the flywheel while going downhill and get a boost going back uphill. The system focuses on the mass of the flywheel and redesigning it so that braking energy is stored and then used to push start the bicycle.

Uploaded by

Sreehari H
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Kinetic Energy Recovery System using a Flywheel in Bicycle

We are using a kinetic energy recovery system by designing the flywheel for
recovering the moving bicycle energy under braking and also to convert the usual
loss in kinetic energy into a gain. While riding a bicycle, a great amount of kinetic
energy is lost while braking. To use this energy, we are using a flywheel to store
the energy, which is normally lost during braking and reuses it to help propel the
rider when starting. By designing the flywheel which is more suitable to the frame
properties and rider compatibility, the efforts of the rider can be reduced. The
rider can charge the flywheel during downward motion on a hilly road and boost
the bicycle when accelerating. This project preliminary deal with one of the
methods for recovering the kinetic energy from the Flywheel, which is
implemented in a bicycle. In this regenerative braking system, we are
concentrating on the mass of the flywheel and re-designing it. A flywheel is used
which stores the energy when brakes are applied and then the saved energy is
used to give push start to the bicycle.

Components

 Cycle

 Flywheel arrangement

 Metal frame

 Sprocket

 Chain

You might also like