Scribd
Upload
209 views1 page

Fit - Up and Visual Examination Report: Attachment Drawing Joint Detail

The document is a fit-up and visual examination report for welding work. It summarizes the inspection of one weld between parts TC-2. The weld was 6mm thick and used the SMAW welding process. It was inspected and found to have proper alignment, root opening, angle and size of groove preparation. The weld reinforcement, fillet sizes and surface also met requirements. The weld was approved as acceptable after examination.

Uploaded by

Muhammad Fitransyah Syamsuar Putra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
209 views1 page

Fit - Up and Visual Examination Report: Attachment Drawing Joint Detail

The document is a fit-up and visual examination report for welding work. It summarizes the inspection of one weld between parts TC-2. The weld was 6mm thick and used the SMAW welding process. It was inspected and found to have proper alignment, root opening, angle and size of groove preparation. The weld reinforcement, fillet sizes and surface also met requirements. The weld was approved as acceptable after examination.

Uploaded by

Muhammad Fitransyah Syamsuar Putra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Report No : 02/X/QC-FVER/18

Revision : 0
FIT - UP AND VISUAL EXAMINATION REPORT
Date : October 11, 2018
PT. UNIXINDO EKATAMA SENTANA Page : 1 of 1
Job No : - Drawing No : -
Project : - Procedure No : QP-23
Costumer : - Applicable Code : ASME SECTION IX
Check of Completed Weld
Part / Weld Welding Welder Fit-Up Check
Reinforcement
WPS No Thickness Remarks
Fillet Weld Surface
Identification Process Stamp No. Alignment Root Opening Angle Grove Grove
L1 L2 Tr
TC-2 003/WPS/SMAW SMAW Z 15 6 to 6 0 2 60⁰ 2 - - - ACC -

Attachment Drawing Joint Detail

Examined by: Approved Authorized Inspector Note

Name/Signature/Date Name/Signature/Date Name/Signature/Date Name/Signature/Date


Form No: 017 - Rev. 0

You might also like