JOINT INSPECTION REPORT - Raceways/Tr
PROJECT : LINE 7 (ANDHERI TO DAHISAR EAST
MRTS CORRIDOR)
CLIENT : MUMBAI METROPOLITAN REGION DEVELOPMENT AUTHORITY (MMRDA)
CONSULANTS : AICA GC
E&M Contractor- M/S Sterling & Wilson
Inspection by
Name of the Saff / representative Designation
2 Mr. Paresh Pawar
3 Mr. Musa Ashraf
4 Mr. Sachin Kharat
5 Mr. Rohit Poojary
Check findings
Sr. No. Parameters to check Parameter defined in
BOQ/Specification/codal
provisions
Applicable codes :IS 277: 2003, IS 2629
1 Raceway
Check whether the sample(material) is
in line with BOQ parameters defined in
the contract.
A size 200 X 50 mm
a Thickness 2 mm
b Micron/ GSM min 18 micron/minimum 260 GSM
B size 100 X 50 mm
a Thickness 2 mm
b Micron/ GSM min 18 micron/minimum 260 GSM
Check the Source of Material is Bharati,
C selectedd from the vendor list specified Unitech,Steelways,MEM,BEC,Profa
from the appendix F(Indicative vendor b,Indiana RK Engg and equivalent
list)
cadmium plates brass screw conter
D
Screw for removable cover sunk type
Check Invoice/recieving Challan of should be submitted at the time of
E
Material. material receive at site
2 Raceway junction box
Check whether the sample(material) is
in line with BOQ parameters defined in
the contract.
A size 150 X 150 mm
a Thickness
2 mm
b Micron/ GSM
min 18 micron/minimum 260 GSM
B size 250 X 250 mm
a Thickness
2 mm
b Micron/ GSM
min 18 micron/minimum 260 GSM
Check the Source of Material is selected Bharati,
C from the vendor list specified from the Unitech,Steelways,MEM,BEC,Profa
appendix F(Indicative vendor list) b,Indiana RK Engg and equivalent
Check Invoice/recieving Challan of should be submitted at the time of
D
Material. material receive at site
3 PERFORATED CABLE TRAY
Check whether the sample(material) is
in line with BOQ parameters defined in
the contract.
A size 300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Type of tray flange
doubleed bend type
B Vertical Inside Bend 45D angular type
300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Type of tray flange
doubleed bend type
d Radius of Bend should be 12 times the diameter of
largest LV cable
C Vertical outside Bend 45D angular type
300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Type of tray flange
doubleed bend type
d Radius of Bend should be 12 times the diameter of
largest LV cable
D Bend 90D angular type
300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Type of tray flange
doubleed bend type
d Radius of Bend should be 12 times the diameter of
largest LV cable
E Equal Tee
300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Type of tray flange
doubleed bend type
Bharati,
F Check the Source of Material is selected Unitech,Steelways,MEM,BEC,Profa
from the vendor list specified from the b,Indiana RK Engg and equivalent
appendix F(Indicative vendor list)
Check Invoice/recieving Challan of should be submitted at the time of
G
Material. material receive at site
4 Ladder Type cable Tray
Check whether the sample(material) is
in line with BOQ parameters defined in
the contract.
A size 300mm X 40 mm
a Thickness
2 mm
b Micron/ GSM
min 40 micron/minimum 450 GSM
c Runner
20x75x20x2.5mm
d Rungs 20x30x20x2.5mm 250mm center to
centre
Bharati,
B Check the Source of Material is selected Unitech,Steelways,MEM,BEC,Profa
from the vendor list specified from the b,Indiana RK Engg and equivalent
appendix F(Indicative vendor list)
Check Invoice/recieving Challan of should be submitted at the time of
C
Material. material receive at site
5 Physical appearance
a Shape machine bends
b Coating It should be rust proof
6 Documents of measuring instruments
Micrometer, Vernier
a Name:
Calliper,Elcometer
b Caliberation certificate: sholud be submitted with instrument
7 Accessories
A GI slotted Angle
Size- ISA 35 X 35X 5 mm ISA 40 X 40 X 5 mm
Hot dip galvanized/ powder
a Material coated/pre galvanized / stainless
steel
c Dimension as per BOQ/TS/ code ISA 40 X 40 X 5 mm
(i) Thickness 5mm
(ii) micron 100
B GI Threaded Rod
Size- 12 mm 12 mm
Hot dip galvanized/ powder
a Material coated/pre galvanized / stainless
steel
c Dimension as per BOQ/TS/ code 12 mm
(i) Thickness 5mm
(ii) micron 100
Documents submitted/available if any
8 with sample (for major items only)
should be submitted at time of
a Test certificate of source of material
material receive on site
b GTP should be submitted with TDS
c MTP
d Third Party test report should be perform for major items
e FAT should be perform for major items
f SAT should be perform for major items
Approval/performance certificate issued by
g Atleast 2 metro projects
other metro projects
h supporting PO copies Atleast 3 projects PO copies
i ISO certificate Valid and renewed
j BIS certificates Valid and renewed
k Company financial documents As per GCC
l Trademark certificates
m Quality certificate
n Company Profile
o Incorporation certificate
E&M Contractor AICA-GC
Name: Name:
N REPORT - Raceways/Trays
Doc. No. MEP/ML7/SA/003
THORITY (MMRDA) Date of inspection -15/05/2019
Organization
MMRDA
AICA-GC
AICA-GC
Sterling& Wilson Ltd.
heck findings
contractor
Accetance criteria
Actual measured submission
value/compliances
200 X 50 mm
2.04; 2.01; 2.3 mm
19.4; 17.9; 16.7 micron
100 X 50 mm
2.01; 2.00; 2.06 mm
19.5; 18.5; 18micron
Profab
S/S &GI counter sunk
type
150mmx150mmx68mm
2.17,2.21,2.25 mm
22,16.6,17.5
not meaured
not meaured
not meaured
profab
300mm X 40 mm
2.5,2.25,2.44
43,47,39
doubleed bend type
300mm X 40 mm
1.68; 1.84; 1.68
57; 52; 63
doubleed bend type
not measured
300mm X 40 mm
2.31; 2.62;
70; 60; 66
doubleed bend type
not measured
300mm X 40 mm
1.75; 2.30
78; 54; 49
doubleed bend type
not measured
300mm X 40 mm
2.3; 2.9; 2.10
54; 70; 50
doubleed bend type
profab
300mm X 40 mm
2.54,2.30,2.19
14.4,11.7,12.5
20x75x20x2.5mm
20x30x20x2.5mm
profab
bends are equivalent
no rust on material
Vernier Calliper,
Elcometer
Calibration certificate
Available submitted
ISA 35 X 35X 5 mm
Hot dip galvanised GI
ISA 35 X 35X 5 mm
5.71; 5.7; 5.94 mm
124; 131; 137
12 mm
Hot dip galvanised GI
12 mm
5.71; 5.7; 5.94 mm
124; 131; 137
MMRDA
Name:
