910G Wheel Loader AKR00001-UP (MACHINE) POWERED BY 3064 Engine(SEBP30...
Page 1 of 2
Shutdown SIS
Previous Screen
Product: COMPACT WHEEL LOADER
Model: 910G COMPACT WHEEL LOADER AKR
Configuration: 910G Wheel Loader AKR00001-UP (MACHINE) POWERED BY 3064 Engine
Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
Media Number -SENR5664-31 Publication Date -01/05/2015 Date Updated -23/10/2018
i05907625
Refrigerant Receiver-Dryer - Remove and Install
SMCS - 7322-010
Illustration 1 g01257459
Top View of Receiver-Dryer
(1) Inlet
(2) Quick Disconnect Fittings
(3) Moisture Indicator
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/12/2019
910G Wheel Loader AKR00001-UP (MACHINE) POWERED BY 3064 Engine(SEBP30... Page 2 of 2
(4) Outlet
NOTICE
If the receiver-dryer does not have air conditioner quick disconnects,
the system must be recovered, evacuated, and recharged after the
receiver-dryer has been replaced.
The refrigerant that is in the system must be recovered if the receiver-dryer does not have air
conditioner quick disconnects (2) . Refer to the Testing and Adjusting, "Refrigerant Recovery" section
before you remove the receiver-dryer. If the receiver-dryer has air conditioner quick disconnects (2) ,
use the procedure that follows.
Refer to Safety Requirements before service is performed on the air conditioning system.
1. Stop the engine for 5 minutes to allow the air conditioning system to equalize the pressure.
2. Disconnect the inlet hose (1) from the old receiver-dryer at the air conditioner quick
disconnects.
3. Connect the hose that was disconnected in Step 2 to the inlet on the new receiver-dryer.
4. Disconnect the electrical connections on the old receiver-dryer. Connect the electrical
connections to the new receiver-dryer.
Note: If the receiver-dryer has quick disconnects, do not add additional oil or refrigerant to the
system.
5. Start the engine. Operate the air conditioning system for 1 minute.
6. With the air conditioning system in operation, disconnect the outlet hose (4) from the old
receiver-dryer. Disconnect the old receiver-dryer at the air conditioner quick disconnects.
7. Stop the engine for 5 minutes to allow the air conditioning system to equalize pressure.
8. Connect the outlet hose (4) that was disconnected in step 6 to the new receiver-dryer.
Note: The receiver-dryer must be replaced annually. The receiver-dryer must also be replaced
whenever the system is opened. The receiver-dryer should be replaced if moisture indicator (3) is
filled with moisture. Moisture indicator (3) will display a pink color or white color if the receiver-
dryer is full of moisture.
Copyright 1993 - 2019 Caterpillar Inc. Thu Sep 12 20:54:18 UTC+0700 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/12/2019
