Scribd
Upload
68 views

Plinth Beam

1. This document provides information about the loads, dimensions, and design of a reinforced concrete beam including its bending moment, shear force, reinforcement, and deflection check. 2. The maximum bending moment is 314 kN-m at the interior support and 272 kN-m at the center of the span. The maximum shear force is 223.2 kN at the support section. 3. The section is under-reinforced as the limiting moment of resistance is greater than the actual bending moment. Stirrups spaced at 229 mm near the support are designed to resist the shear force.

Uploaded by

Selva kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
68 views

Plinth Beam

1. This document provides information about the loads, dimensions, and design of a reinforced concrete beam including its bending moment, shear force, reinforcement, and deflection check. 2. The maximum bending moment is 314 kN-m at the interior support and 272 kN-m at the center of the span. The maximum shear force is 223.2 kN at the support section. 3. The section is under-reinforced as the limiting moment of resistance is greater than the actual bending moment. Stirrups spaced at 229 mm near the support are designed to resist the shear force.

Uploaded by

Selva kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

1.

Data
L 8
g 10
q 15
fck 20
fy 415

2.Cross sectrional dimesions

Depth Span/2 667

Adopt d 650
D 700
b 300

3.Loads
Self weight of the beam = 5.25

Dead load = 10

Finishes = 0.75

Total dead load g= 16

Live load q= 15

4.Bending moment and shear force

Negative BM at interior support M u(-ve) = 1.5*(gL2/10)+(qL2/9)

= 314

Positive BM at Center of span M u(+ve) = 1.5*(gL2/12)+(qL2/10)

= 272

Maximum sheatr force at the support section is

Vu = 1.5*0.6L(g+q)

= 223.2

5. Limiting moment of resistence


Mu lim = 0.138 fck bd2
350
Since Mu Mu lim the section is under reinforced

6 . Main reinforcements
Mub = 0.87 fy Ast d (1-(Ast*fy/b*d*fck))

a -234682.5
b 915261750000
c 1223040000000000

#VALUE!
7.Shear reinforcement

Ꚍmb vu/bd 1.1446154

Pt 100 Ast/bd #VALUE!

Ꚍc 0.62

Balance shear 102.3

Using 8mm diameter two legged stirrups the spacing is

Sv 0.87*fy*Asv*d/Vus 229.4061583578

Adopt 8mm diameter two legged stirrups at 229 center near support gradually increasin

8. Check for deflection

At center of span
Pt 100 Ast/bd

Modification factor Kt 1.2


Kc 1
Kf 1
(L/D)max (L/D)basic*Kt*Kf
31.2

(L/D)actual 12.3076923
1.5*(gL2/10)+(qL2/9)

1.5*(gL2/12)+(qL2/10)

1.5*0.6L(g+q)
b2 8.377041E+23
4ac -1.1481E+21
2a -469365
b2-4ac 8.388522E+23
b2-4ac /2a -1.78721E+18

ear support gradually increasing to toward the center of span

You might also like