Scribd
Upload
1K views1 page

International Standard 724: ISO General-Purpose Metric Screw Threads - Basic Dimensions

The document is an international standard that specifies the basic dimensions in millimeters of ISO metric screw threads. It provides the nominal diameters, pitch diameters, minor diameters, and pitch values for screw threads ranging from 0.35mm to 9mm in nominal diameter. Dimensions are given in a table and were calculated using formulas specified in the standard and rounded to the third decimal place. The standard was prepared by the ISO technical committee on screw threads to provide common basic dimensions for metric screw threads.

Uploaded by

yuvaraja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views1 page

International Standard 724: ISO General-Purpose Metric Screw Threads - Basic Dimensions

The document is an international standard that specifies the basic dimensions in millimeters of ISO metric screw threads. It provides the nominal diameters, pitch diameters, minor diameters, and pitch values for screw threads ranging from 0.35mm to 9mm in nominal diameter. Dimensions are given in a table and were calculated using formulas specified in the standard and rounded to the third decimal place. The standard was prepared by the ISO technical committee on screw threads to provide common basic dimensions for metric screw threads.

Uploaded by

yuvaraja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INTERNATIONAL STANDARD ISO 724 Second edition 1993-1 O-l 5 ISO

general-purpose metric screw threads - Basic dimensions Filetages metnques ISO


pour usages gknkaux - Dimensions de base Reference number ISO 724:1993(E) This is a free 4 page sample. Access the full version
online. ISO 724:1993(E) Foreword ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Esch member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International organizations.
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard
ISO 724 was prepared by Technical Committee ISO/TC 1, Screw threads, Sub-Committee SC 1, Basic data. This second
edition cancels and replaces the first edition (ISO 724:1978), the table of which has been technically revised. ca ISO 1993 All
rights reserved. NO part of this pubiication may be reproduced or utilized in any form or by any means, electronie or mechanical, including
photocopying and mlcrofilm, without per-mission in writing from the publisher. International Organization for Standardization Case Postale 56 l
Cl-l-l 211 Geneve 20 l Switzerland Printed in Switzerland ii This is a free 4 page sample. Access the full version online. INTERNATIONAL

STANDARD ISO 724:1993(E) ISO general-purpose metric screw threads - Basic


dimensions 1 Scope This International Standard specifies the basic dimen-sions, in millimetres, of ISO metric
screw threads in accordance with ISO 261. The values refer to the basic Profile in accordance with ISO 68. 2 Normative
references The following Standards contain provisions which, through reference in this text, constitute provisions of
this International Standard. At the time of publi-cation, the editions indicated were valid. All Standards are subject to
revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of
applying the most re-cent editions of the Standards indicated below. Members of IEC and ISO maintain registers of cur-
rently valid International Standards. I so 68:-“, ISO general-purpose screw threads - Basic Profile. ISO 261 :-2), ISO
general-purpose metric screw threads - General plan. ISO 5408: 1983, Cylindrical screw threads - Vocabu-lary . 3 Definitions
For the purposes of this International Standard, the definitions given in ISO 5408 apply. 4 Symbols D basic major
diameter of internal thread diameter) (nomina d D2 4 4 4 H P 5 basic major diameter of external thread (nominal
diameter) basic pitch diameter of internal thread basic pitch diameter of external thread basic minor diameter of internal
thread basic minor diameter of external thread height of fundamental triangle pitch Basic dimensions Dimensions
shall be as shown in figure 1 and given in table 1. Figure ‘I - Basic dimensions 1) To be published. (Revision of ISO 68:1973) 2)
To be published. (Revision of ISO 261:1973) 1 This is a free 4 page sample. Access the full version online. ISO 724:1993(E) The values of
D,, 4, D, and d, have been calculated from the following formulae and rounded, in table 1, dz = d-2 x+H=d-0,649 5P to the
third decimal place: Dz=D-2x$ H = D - 0,649 5P Dl =D-2x $H=D-1,082 5P 4 =d-2x -$-H=d-1,0825P Table 1 - Basic dimensions
Nominal diameter = Major diameter D, d Pitch P Pitch diameter D2J d2 Minor diameter 41 4 13 0,35 1,573 1,421 02 1,670 1,583 2 0,4
1,740 1,567 0,25 1,838 1,729 22 0,45 1,908 1,713 0,25 2,038 1,929 I I I I 3 0,5 2,675 2,459 0,35 2,773 2,621 3,5 08 3,110 2,850 0,35
3,273 3,121 Nominal diameter = Major diameter Dt d Pitch P Pitch diameter D2f d2 1 Minor diameter 4 0,70,7 3,545 0,50,5 3,675 3,242
3,459 4,5 0,75 4,013 3,688 4,175 3,959 5 W3 4,480 4,134 0,5 4,675 4,459 515 0,5 5,175 4,959 1,25 7,188 6,647 8 1 7,350 6,917 0,75
7,513 7,188 1,25 8,188 7,647 9 1 8,350 7,917 0,75 8,513 8,188 2 This is a free 4 page sample. Access the full version online. This is a
free preview. Purchase the entire publication at the link below

You might also like