Brisbane QLD-Australia

Unit 31, 13 Norman Street, Wooloowin 4030

Ph 0404963872

California Bearing Ratio Report ( one point)

Client: John Sandercock Report Number: CBR - 1

Address: 66 Ernest St, South Brisbane QLD 4101 Report Date: 1/10/19
Project Number: 2 Order Numer: -
Project Name: Soils laboratory testing Test Method: AS1289.6.1.1
Location: TAFE Queensland Page 1 of 1

Sample Numer: 1 SAMPLE LOCATION

Date Sampled: 5/9/19
Date Tested: 12/9/19 Tested by JP Geotechnical
Sampled By: Group 6
Sampling Method: Q060
Material Source: Mt Gravatt soil stockpiles
Material Type: Crushed rock road-base

Test Results Chart

Description Result
Moisture Method: AS1289.2.1.1 California Bearing Ratio graph
CBR Report Value (%): 25 14
CBR Penetration (mm): 5
12
Moisture Ratio (%): 97.5
Density Ratio (%): 95.5 10
Moisture Content w1 (%): 8.1
Load (KN)

8
Moisture Content w30 (%): 8.3
6
Soaking Time: 0
% of material > 19 mm 2.25 4
Mass of Surcharges (g) : 0 2
Compaction Hammer: AS1289.5.1.1
0
Period of Soaking: 0 0 5 10 15
Identification of Sample: BCC class 2 Penetration (mm)
Description of Sample: Subtype 2.4 CBR Line
Variation: None
Method Plasticity Level: Sands and granular
material.
Curing Time (hour) : 1.5
This document is issued in accordance with NATAs APPROVED SIGNATORY
accreditation requirements. Accredited for compliance

with ISO/IEC 17025

Penetration Load (KN)
0.0 0
0.5 0.65
1.0 1.2
1.5 1.77
2.0 2.29
2.5 2.82
3.0 3.3
4.0 4.28
5.0 5.19
7.5 7.47
10.0 9.7
12.5 12.1
 Brisbane QLD-Australia
Unit 31, 13 Norman Street, Wooloowin 4030
Ph 0404963872

Moisture Density Relationship Report

Client: John Sandercock Report Number: MDR - 1

Address: 66 Ernest St, South Brisbane QLD 4101 Report Date: 1/10/19
Project Number: 2 Order Numer: -
Project Name: Soils laboratory testing Test Method: AS1289.5.1.1
Location: TAFE Queensland Page 1 of 1

Sample Numer: 1 SAMPLE LOCATION

Date Sampled: 29/8/19
Date Tested: 15/9/19 Tested by JP Geotechnical
Sampled By: Group 6
Sampling Method: Q060
Material Source: Mt Gravatt soil stockpiles
Material Type: Crushed rock road-base
Test Results Chart
Description Result
Moisture Method: AS1289.2.1.1 Moisture Density
Maximum Dry Density (t/m^3): 2.17 2.35

Optimum Moisture Content (%): 8.5

Material Retained on 19mm sieve (%): 0.8
2.3
Material Retained on 37.5mm sieve: 0
Curing Time (min): 30
Dry Density (t/m^3)

Method used for Liquid Limit: Q104A 2.25

2.2

2.15

2.1
5 7 9 11 13
Moisture Content (%)
MDR Line SG

This document is issued in accordance with NATAs APPROVED SIGNATORY

accreditation requirements. Accredited for compliance

with ISO/IEC 17025

Moisture content
Dry density
6.4 2.148
8.3 2.163
9.3 2.147
9.7 2.126

8 2.304
10 2.203
12 2.11
 Brisbane QLD-Australia
Unit 31, 13 Norman Street, Wooloowin 4030
Ph 0404963872

Quality of Materials Report

Client: John Sandercock Report Number: MDR - 1
Address: 66 Ernest St, South Brisbane QLD 4101 Report Date: 1/10/19
Project Number: 2 Order Numer: -
Project Name: Soils laboratory testing Test Method: Q103A-Q104A-Q105-Q106
Location: TAFE Queensland Page 1 of 1
Sample Numer: 1 SAMPLE LOCATION
Date Sampled: 29/8/19
Date Tested: 5/9/19 Tested by JP Geotechnical
Sampled By: Group 6
Sampling Method: Q060
Material Source: Mt Gravatt soil stockpiles
Material Type: Crushed rock road-base
Test Results Chart
AS Sieve Percent Specification
Size(mm) Passing (%) Limit
53 100 100-100 Quality of Materials
37.5 100
26.5 100 QM Line

19.0 99.2 80-100 120

13.2 91.2
100
Percent Passing (%)

9.50 81.2
80
6.70 71.9 70-90
60
4.75 63.2
40
2.36 46.2
20
1.18 36.4 30-75
0
0.60 28.4 0 10 20 30 40 50 60
0.425 24.4 AS Sieve Size(mm)
0.30 21.0 20-40
0.15 15.2
0.075 11.2 5-20
Liquid Limit (%): 19.6 Test Method Results
Plastic Limit (%): 14.2 Q104A
Plasticity Index (%): 5.4 Q105
Linear Shrinkage (%): 3.6 Q105 Coefficent of
Q106 Curvature
This document is issued in accordance with NATAs APPROVED SIGNATORY
accreditation requirements. Accredited for compliance

with ISO/IEC 17025