28/6/2017 ICND1 Assesment Lab

Free Cisco labs for CCNA, CCNP and CCIE students!

Presented by René Molenaar - CCIE #41726

HOME SHOP LABS BLOG FORUM FAQ CONTACT

Search this website …

Home » CCNA R&S » ICND1 Assesment Lab

ICND1 Assesment Lab

JUNE 16, 2010 BY RENE MOLENAAR 49 COMMENTS

Scenario:
You have been studying for the CCNA for quite some time, and you have just passed the ICND1
exam. While you continue your work towards achieving the ICND2 certi cate to become fully
CCNA certi ed you felt it was time to get a job to start your IT networking career.You apply for a
job at “BigMobs inc” and the job interview went very smoothly…there is just one thing, they want
you to show your newly acquired networking skills in a testlab! You are con dent and willing to
show your newly acquired tricks.

Goal:
Set all the correct hostnames on the routers.
Set all the correct IP addresses and subnet masks, you are not allowed to use a subnet
calculator.
Godzilla: con gure a type7 enable password “vault”

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 1/22
28/6/2017 ICND1 Assesment Lab

Kingkong: con gure a type5 enable password “vault”

Nessie: only SSH access is allowed, no telnet. Username = big , Password = mobs
Kingkong: con gure password “cisco” on the console 0.
The link between Godzilla and Nessie should be PPP encapsulation.
The link between all other routers should be HDLC encapsulation.
When you login remotely on Godzilla it should show a banner “Get away from Godzilla”
Create a static host con guration so you can telnet to “KingKong” instead of the IP address.
Disable automatic DNS lookups on Nessie.
Godzilla: Make sure items sent to the console are not interrupting the command you type.
Kingkong: the console should never timeout.
Create a loopback1 interface on Godzilla, IP Address 1.1.1.1/24
Create a static route on KingKong pointing to the loopback1 interface of Godzilla.
Create a default route on Nessie pointing to the loopback1 interface of Godzilla, it should
have an Administrative Distance of 200.
Con gure RIP on all routers, version2. You should be able to ping all networks.
Make sure the subnetmask information is included with the routing updates.
Disable CDP between KingKong and Godzilla.

It took me 1000s of hours reading books and doing labs, making mistakes over and over again until
I mastered all the protocols for CCNA.

Would you like to be a master of networking too? In a short time without having to read 900 page
books or google the answers to your questions and browsing through forums?

I collected all my knowledge and created a single ebook for you that has everything you need to
know to become a master of CCNA.

You will learn all the secrets about switching, routing, subnetting and more.

Does this sound interesting to you? Take a look here and let me show you how to Master CCNA!

IOS:
c3640-jk9s-mz.124-16.bin

Topology:

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 2/22
28/6/2017 ICND1 Assesment Lab

Video Solution:
ICND1 Assesment lab in GNS3

Con guration Files

Here are the con guration les:

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 3/22
28/6/2017 ICND1 Assesment Lab

ICND1 Assesment Lab – Startup Con guration

ICND1 Assesment Lab – Final Con guration

Do you want your CCNA or CCNP Certificate?
The How to Master series helps you to understand complex topics like
spanning­tree, VLANs, trunks, OSPF, EIGRP, BGP and more.

Written by René Molenaar ­ CCIE #41726

Master CCNA and CCNP Today!

0 Tweet
2
0
Like
Chia sẻ

FILED UNDER: CCNA R&S TAGGED WITH: CCNA-RS

Comments

Waschman says
May 10, 2011 at 13:47

I am not a newcomer but I de nitly think this is a good lab to try out for newcomers in
Cisco after they have studied CCNA (Discovery/Exploration).

Keep up the good work.

Reply

Oliver says
July 22, 2011 at 16:21

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 4/22
28/6/2017 ICND1 Assesment Lab

Do you have a phone number for BigMobs, are they still recruiting ?

Reply

Rene Molenaar says

April 2, 2012 at 10:45

You are busy with labs Oliver lol ;D

I’ll give them a call to tell them I know an EIGRP expert

Reply

Pharoah Brownstone says

February 28, 2012 at 10:55

Not only is this great lab for ICND1’ers like myself but I’m really diggin’ the router names
on the labs I’ve seen so far not that it really matters what the names are but they’re
humorous and makes for interesting discussion when talking about what’s going on
between which routers. So much better that R1, R2, Denver, Atlanta, etc….

Reply

ReneMolenaar says
April 2, 2012 at 10:48

Thanks

Reply

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 5/22
28/6/2017 ICND1 Assesment Lab

bainkaboom says
April 13, 2012 at 20:16

Does the topology open up the routers automatically etc? I have the ios image and its not
going through somehow,says "bad parameter" is there a problem with my image etc?

Reply

ReneMolenaar says
April 15, 2012 at 10:17

Normally it should open without any issues, if you do get errors however make sure
to check this article rst:

http://gns3vault.com/Faq/203-bad-number-of-parameters-1-with-minmax22.html

It solves 99% of the GNS3 problems.

Reply

mistborn_soother says
May 6, 2012 at 15:22

Even though I’m working on my CCNP now, this lab is still great as a refresher and to
brush up on any forgotten stuff. I highly recommend this lab for anyone doing ICN1. If
you can do all the tasks in this lab then you should be more than ready for the ICND1

Reply

ReneMolenaar says

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 6/22
28/6/2017 ICND1 Assesment Lab

May 7, 2012 at 07:43

Thanks for your comment

Reply

srsheely says
May 18, 2012 at 04:17

Where can I get access to IOS’s for practice?

Reply

ReneMolenaar says
June 8, 2012 at 13:40

Of cially only from the Cisco website. You’ll need CCO access to download the IOS
for the devices you own.

Reply

mbradford99 says
August 17, 2012 at 02:30

trying to nd this IOS c3640-jk9s-mz.124-16.bin on Cisco, but can’t seem to nd it.

is it still available there ?

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 7/22
28/6/2017 ICND1 Assesment Lab

Thanks,

Mike

Reply

mbradford99 says
August 17, 2012 at 02:31

[quote=mbradford99]trying to nd this IOS c3640-jk9s-mz.124-16.bin on Cisco, but

can’t seem to nd it.

is it still available there ?

Thanks,

Mike[/quote]

BTW I have CCO access and can’t nd it.

Reply

alfonsoCCNA says
February 7, 2013 at 20:01

hey budy, you will nd it here

http://kat.ph/cisco-ios-big-collection-t5089613.html

select the one you need when the download starts and only download the one you
need…

Reply

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 8/22
28/6/2017 ICND1 Assesment Lab

jgustafson says
August 19, 2012 at 02:53

Got as far as the telnet task but when I try for the banner I get ;
Destination unreachable; gateway or host down. The host is up and con gured for telnet.
I could ping Nessie when it was originally set up but not now. I have been following your
video solution but i can not telnet.

Reply

ReneMolenaar says
August 24, 2012 at 16:34

If you see that message it means that telnet has not been con gured or that you are
unable to reach the IP address you are trying to connect to.

Reply

dreday says
September 2, 2012 at 18:57

I’m new to CCNA and I’ve registered but I am unable to see the Topology le to
download. Thanks

Reply

dreday says

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 9/22
28/6/2017 ICND1 Assesment Lab

September 2, 2012 at 19:27

I’m able to see the Topology les now after posting a comment and closing and reopening
the browser. Thanks.

Reply

ReneMolenaar says
September 9, 2012 at 10:58

Good to hear you got it resolved.

Reply

HaHussle says
November 9, 2012 at 07:08

gonna try that now cause im also unable to see the topology le

Reply

tekron says
October 19, 2012 at 12:36

Hi Rene, thanks for this, i can’t express the depth of my gratitude.

All accolades done, I am unable to download the GNS3 topology, the link doesn’t even
show.
I need your help please.
thank you

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 10/22
28/6/2017 ICND1 Assesment Lab

never mind, the links were starring me right in the face,

**anxiety***

Reply

jrbo4u says
November 8, 2012 at 17:08

hi guys,
I am having problem in downloading the con g le. pls help me.

Reply

farxad says
November 18, 2012 at 07:38

This is Brilliant. Loved it. working on these labs as i type in here. Thank you GNS3Vault

Reply

alfonsoCCNA says
February 7, 2013 at 19:58

hello everyone, I have a quick question I hope you guys can help out.

when i try to con gure the ssh part on the router it wont work on me router…

can someone help me

THank you

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 11/22
28/6/2017 ICND1 Assesment Lab

Reply

click_lp23 says
February 9, 2013 at 23:16

test

Reply

dwittlief says
February 27, 2013 at 00:49

not seeing the topology le either – trying what some of you did to see if it appears.

Reply

rsanjeev23 says
March 1, 2013 at 06:54

Hi ,

I want to download CCNA lab document in pdf form,could you guys please share the
link…..

Reply

ciscofreak23 says
March 10, 2013 at 05:35

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 12/22
28/6/2017 ICND1 Assesment Lab

rsanjeev23,

i have many lab manuals….

dis one short and to the point…
http://www.4shared.com/of ce/p-1NEmGu/labmannual.html

here is the one from Cisco press in 4 parts…..

http://www.4shared.com/of ce/5Bi7ynXo/CCNA_1_-
_Network_Fundamentals.html

http://www.4shared.com/of ce/l7wSuVfV/CCNA_2_-_Routing_Protocols_and.html

http://www.4shared.com/of ce/fCZ-UYKQ/CCNA_3_-
_Switching_and_Wireles.html

http://www.4shared.com/of ce/4uyOwDkm/CCNA_4_-_WAN_Technologies.html

let me know if you need any other material,,,,,

all the best fr ur CCNA…..

Reply

irfan says
April 1, 2013 at 05:30

can’t open the con gs on gns3 on my mac?

Reply

Protozaur says
April 7, 2013 at 13:27
https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 13/22
28/6/2017 ICND1 Assesment Lab

Hi Rene,
I guess there is a clocking mistake with this example, or at least I think so>
We have:
[quote]Godzilla#sh ip int br
Interface IP-Address OK? Method Status Protocol
Serial0/1 192.168.12.1 YES manual up up
Godzilla#sh controll s0/1
M4T: show controller:
PAS unit 1, subunit 1, f/w version 1-45, rev ID 0x2800001, version 1
idb = 0x6449CE68, ds = 0x6449DF28, ssb=0x6449E2E4
Clock mux=0x0, ucmd_ctrl=0x1C, port_status=0x7B
Serial con g=0x8, line con g=0x200
maxdgram=1608, bufpool=78Kb, 120 particles
DCD=up DSR=up DTR=up RTS=up CTS=up
line state: up
[u]cable type : V.11 (X.21) DCE cable, received clockrate 2015232[/u][/quote]
[etcetc]

and

[quote]Nessie#sh controll ser0/1

M4T: show controller:
PAS unit 1, subunit 1, f/w version 1-45, rev ID 0x2800001, version 1
idb = 0x645288E8, ds = 0x645299A8, ssb=0x64529D64
Clock mux=0x0, ucmd_ctrl=0x1C, port_status=0x7B
Serial con g=0x8, line con g=0x200
maxdgram=1608, bufpool=78Kb, 120 particles
DCD=up DSR=up DTR=up RTS=up CTS=up
line state: up
[u]cable type : V.11 (X.21) DCE cable, received clockrate 2015232[/u][/quote]
[etcetc]

There is no DTE in this topology. Who’s providing the clock?

or am I missing something?
Thanks.
https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 14/22
28/6/2017 ICND1 Assesment Lab

Reply

peter.sithole says
May 26, 2013 at 15:25

thank bro u saved me

Reply

damieno613 says
June 2, 2013 at 22:19

Are the instructions suppose to be included in the .zip les?

Reply

cscecela says
June 7, 2013 at 13:23

There is no topology le when trying to download the ICND1Assesment.zip le. When I

open it all it has is a .net le. Any help would be appreciated.

Reply

e01estal says
June 15, 2013 at 01:29

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 15/22
28/6/2017 ICND1 Assesment Lab

The ICND1 nal con gs does not have the topology.net in the folder. The ICND1 doesn’t
have the cfg con g le. I can’t get it to run within the GNS setup. Please advise?

The ICND1 Assessment does work c/o it has both the topology.net and the cfg con g le
in the one download.

Reply

Nagendrafreddie says
July 22, 2013 at 07:29

Hi Rene,

I came across this website yesterday. You have done a great job. I am aspiring to grow in
networking domain. I have been studying CCNA stuff since 1.5 years still not con dent
enough to take up my exam.

I some how feel my approach is not quite right. But after going through this website I am
little more con dent than before. Is it possible to clear CCNA with self study? I have lot
of video stuffs, books etc. Like CCNA nuggets, Train signal, books by Tom Lammle.

Its quite dif cult to nd the best teachers around. I feel people like you, Jermey have
done a great job.

Reply

jwmurphy says
September 25, 2013 at 18:40

I keep getting a "Dynamips Error: 208-unable to nd object ‘R1’"

Any help would be great.

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 16/22
28/6/2017 ICND1 Assesment Lab

Reply

klausengelmann says
November 26, 2013 at 20:19

Great assessment…. Well done Rene !!

Reply

Skeem says
January 17, 2014 at 01:14

How do you get this sim to work I click the link but nothing happens. The PC wont open
the le.

Reply

shahab_ab says
January 19, 2014 at 22:17

Thank you very much

All part of this website is CISCO, pretty useful

Reply

rguzman says
February 10, 2014 at 07:42

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 17/22
28/6/2017 ICND1 Assesment Lab

Hi,

I am new here… quick question.

Where do I get the IOS les, do you provide them, is there any web where I can get them?

Reply

Anonymous says
April 6, 2014 at 00:28

How do you nd the ios les for gns3?

Reply

hkouadio says
April 16, 2014 at 08:54

I’m using GNS3 on a Mac and trying to use the lab les I downloaded. Can anyone
provide assistance on how to set the lab on Mac? thank you

Reply

Anonymous says
April 27, 2014 at 05:52

Dear Rene,
I tried to create account. And it says a mail has been sent to activate but I never receive
any mail. Would you please send me your guide lines? Regards, Nizam

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 18/22
28/6/2017 ICND1 Assesment Lab

Reply

Shawn says
June 29, 2014 at 03:27

The ICND1 startup con g download is missing the con gs folder and the nal con g is
missing topology.net and only has R1, R2 and R3.cfg les. Neither downloads are
working in GNS3 as is. Please advise?

Reply

William Canache says

September 10, 2014 at 14:39

Excelente! Video! Muy buen Lab.

Reply

Markus says
October 7, 2014 at 13:29

Very good lab! A little evil though It was interesting to gure that out. So I did
everything myself rst, everything worked. I wanted to see what you did, so I imported
the nal con g that you had. I had a shock, the passwords did not work! In the lab you
said “vault” but i had to edit the .cfg le in notepad and do a password cracker on the
password to get “VAULT” instead. Maybe that was just me

Thanks!
Hopefully we can get some new labs for the new CCNA R/S part, I am not sure which
troubleshooting labs I can go for as the ones you have tend to focus on CCNP.

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 19/22
28/6/2017 ICND1 Assesment Lab

Reply

Filip Arizankoski says

February 10, 2015 at 02:53

when u mistype a command u can use ctrl+shift+6 to disable it without w8ing

Reply

Jay says
March 16, 2015 at 21:25

Also can’t see topology le!

Reply

James-12 says
May 28, 2015 at 16:29

the con g les dont work for me. is it because I am using 3725 IOS? if so I will have to get
the IOS that it suggest.

Reply

Leave a reply:
Logged in as threemillions. Log out?

Comment

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 20/22
28/6/2017 ICND1 Assesment Lab

If you have any technical questions, please use the Forum instead of posting a comment.

POST COMMENT

LOGIN

threemillions

LOG OUT

WANT TO MASTER CCNA & CCNP?

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 21/22
28/6/2017 ICND1 Assesment Lab

POPULAR ITEMS

Cisco R&S Labs

Network Lessons

Solve GNS3 Errors

Study Material

Switches in GNS3

© Copyright 2017 GNS3Vault.com · All Rights Reserved ·

https://gns3vault.com/ccna­rs/icnd1­assesment­lab/ 22/22