Scribd
Upload
2K views1 page

Ipac 689e Pds 7sr171

IPAC 689E is a multifunctional additive package designed for use in single and multi-grade heavy-duty and gasoline engine oils. It contains ash-less dispersants, zinc dithiophosphate, and metallic detergents to provide additional deposit, oil oxidation, and wear and rust control. IPAC 689E has been field tested and treat rate recommendations vary depending on engine oil service level requirements.

Uploaded by

Jorge Zegarra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Ipac 689e Pds 7sr171

IPAC 689E is a multifunctional additive package designed for use in single and multi-grade heavy-duty and gasoline engine oils. It contains ash-less dispersants, zinc dithiophosphate, and metallic detergents to provide additional deposit, oil oxidation, and wear and rust control. IPAC 689E has been field tested and treat rate recommendations vary depending on engine oil service level requirements.

Uploaded by

Jorge Zegarra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

International Petroleum Products & Additives Company, Inc.

Technical Data
PCMO & HDEO Performance Additive
IPAC 689E
Application &
Performance: IPAC 689E is a balanced dispersant-inhibitor crankcase
multifunctional additive package designed to formulate single and
multi-grade heavy-duty and gasoline engine oils. Formulated for
flexibility to use in both higher and lower performance levels, IPAC
689E contains ash-less dispersants, zinc dithiophosphate, and
metallic detergents. It provides additional deposit, oil oxidation,
and wear and rust control in gasoline and diesel engine oils when
industry certification is not required. This product has been field
tested. Contact an IPAC representative for information on all
applicable industry claims and additive package treat rate
recommendations.

VI Improver: IPAC 689E may be used with non-dispersant OCP viscosity


modifiers having high to moderate shear stability depending on
engine oil requirements.

Dosage: Treat rate recommendations vary with engine oil service level.

Typical
Properties: Physical Properties*
Specific Gravity @ 15.6°C (60oF) 1.02
Lb/US gal @ 15.6oC (60oF) 8.50
Viscosity @ 100oC, cSt 42.0
TBN, mg KOH/g 110
Color < 7.5
Flash (P-MCC), oC (oF) 175 (347)

Chemical Properties*
Zinc, wt% 1.90
Calcium, wt% 3.70
Nitrogen, wt% 0.45
Phosphorus, wt% 1.70
Sulfur, wt% 3.90

*The above characteristics are not specifications and are provided to indicate the
typical values measured on the product.

Storage & Handling: Long-term storage, max, °C (°F) 38 (100)


Blending, °C (°F) 43 (110)

IPAC MAKES NO EXPRESSED OR IMPLIED WARRANTIES ON MERCHANTABILITY, FITNESS OR OTHERWISE with respect to this product. In addition, while the
information contained herein is believed to be reliable, no warranty is expressed or implied regarding the accuracy of the data or the results to be obtained from the use
thereof. All recommendations or suggestions for use are made without guarantee inasmuch as conditions of use are beyond our control. The properties given are typical
values and are not intended for use in preparing specifications. Users should make their own test to determine the suitability of this product for their own purposes.

7600 Dublin Blvd. Suite 240 Dublin, California 94568  (925) 556-5530  (925) 556-5531 (fax)

You might also like