Scribd
Upload
242 views1 page

60W DC PoE Injector for iPASOLINK

The document provides installation instructions for a DC PoE Injector Box used to power an iPASOLINK EX outdoor radio over Ethernet cable. The instructions specify to connect the grounding, mount the included 4-pin power connector on the power cable, connect the power connector to the injector box, connect an Ethernet cable to the injector box, and connect the outdoor Ethernet cable to the radio. It also provides pin layout details for the power connectors and minimum Ethernet cable specifications. Finally, it lists allowable Ethernet cable lengths depending on the input voltage to the injector box.

Uploaded by

Dragan Stanic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
242 views1 page

60W DC PoE Injector for iPASOLINK

The document provides installation instructions for a DC PoE Injector Box used to power an iPASOLINK EX outdoor radio over Ethernet cable. The instructions specify to connect the grounding, mount the included 4-pin power connector on the power cable, connect the power connector to the injector box, connect an Ethernet cable to the injector box, and connect the outdoor Ethernet cable to the radio. It also provides pin layout details for the power connectors and minimum Ethernet cable specifications. Finally, it lists allowable Ethernet cable lengths depending on the input voltage to the injector box.

Uploaded by

Dragan Stanic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Installation instructions

DC PoE Injector Box – 60W - Connect grounding to the Earth Screw (FG) (min. 6mm2 yellow/green cable)
For iPASOLINK EX (R1.X, R2.X) - Mount AMP 4 pin power connector (included) on power cable (not included)
DC PoE Injector Box – 60W - connect AMP 4P connector to PoE Injector Box
NEC Eastern Europe Ltd. provides a power injector box to power up iPASOLINK EX - Connect Ethernet cable to GbE RJ45 connector
(R1.X, R2.X) on Ethernet cable. The high power DC PoE Injector Box supply both
- Connect outdoor Ethernet cable to PoE RJ45 connector
data & power to iPASOLINK All Outdoor Radio (EX R1.X, R2.X) on a single outdoor
Ethernet cable.
Pin layout of the AMP 4P power connectors
Pin 1, 2 -48V (-45V- -57V) DC*
Pin 3, 4 GND

Ethernet cable specification (minimum requirement)


- Outdoor: Cat.5E F/UTP, 4x2x24AWG, solid wire Ethernet cable
- Indoor: Cat.5E UTP, 4x2x24AWG, solid wire Ethernet cable
Product code: NEC-POE-BOX-60W
Application Allowable cable length depending on input voltage
Please consider voltage drop on Ethernet cable connecting PoE Injector Box and
iPASOLINK EX. The minimum voltage at EX is -42,5V. The lower the PS voltage at
PoE Injector Box, the shorter the Ethernet cable can be used. When installing a long
outdoor Ethernet cable, please apply -54 ‒ -57V DC to PoE Injector Box.
Some allowable outdoor Ethernet cable length depending on PS voltage:
All Outdoor Radio PS voltage Max. Ethernet cable length
iPASOLINK EX (R1.X, R2.X) -45V 30m
iPASOLINK EX (R1.X, R2.X) -48V 70m
iPASOLINK EX (R1.X, R2.X) -50,4V 100m
iPASOLINK EX (R1.X, R2.X) -57V 100m (GbE limit)

*PLEASE CONSIDER VOLTAGE DROP ON ETHERNET CABLE! PLEASE APPLY


-54 ‒ -57V DC TO POE INJECTOR BOX WHEN INSTALLING A LONG ETHERNET
DC PoE Injector Box application CABLE!
NEC Eastern Europe Ltd. NEC Eastern Europe Ltd.
Ungvár u 64.-66. Ungvár u 64.-66.
1142 Budapest, Hungary 1142 Budapest, Hungary
[email protected] [email protected]

You might also like