BO−123
BODY − FRONT SEAT
BO1M5−03
DISASSEMBLY
1. REMOVE SEATBACK BOARD
Remove the seatback board as shown in the illustration.
A HINT:
Remove the seatback board in order ”A”, ”B” as shown in the
B
illustration.
2. REMOVE HEADREST
3. REMOVE SEAT CUSHION OUTER SHIELD
H04465
(a) Using a screwdriver, remove the power seat switch
knobs.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 4 screws.
H03732
(c) Disconnect the connectors as shown in the illustration.
(d) Remove the seat cushion outer shield.
H03733
(e) Remove the 3 screws and power seat switch from the
seat cushion outer shield.
(f) Remove the 2 screws and lumber support switch from the
seat cushion outer shield.
H03734
2002 LEXUS LX470 (RM914U)
Author: Date: 2316
BO−124
BODY − FRONT SEAT
4. REMOVE FRONT SEAT INNER BELT
(a) Remove the clamp, then disconnect the connector.
(b) Remove the bolts, wave washer and inner belt.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
H03735
5. REMOVE SEAT CUSHION INNER SHIELD
Remove the 3 screws and seat cushion inner shield.
6. REMOVE SEATBACK ASSEMBLY
(a) Disconnect the seat lumber support connector and seat
heater connector.
H03736
(b) Remove the 4 bolts and seatback assembly.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
7. REMOVE ARMREST
Torque: 37 N·m (375 kgf·cm, 27 ft·lbf)
H04403
8. REMOVE SEATBACK FRAME
(a) Remove the 2 hog rings.
(b) Disengage the hook as shown in the illustration.
H04466
(c) Remove the 10 hog rings and 2 clamps.
(d) Remove the 2 headrest supports.
(e) Remove the seatback frame from the seatback cover with
pad.
H04467
2002 LEXUS LX470 (RM914U)
Author: Date: 2317
BO−125
BODY − FRONT SEAT
9. REMOVE LUMBER SUPPORT
Remove the 2 bolts and lumber support.
H04468
10. REMOVE SEATBACK COVER
Remove the 20 hog rings and seatback cover from the seat-
back pad.
11. REMOVE SEAT HEATER (See page BO−128)
H04404
12. REMOVE LOWER SEAT CUSHION
Remove the screw and lower seat cushion shield as shown in
the illustration.
H04737
13. REMOVE FRONT SEAT CUSHION SHIELD
Remove the screw and front seat cushion shield.
H04738
14. REMOVE SEAT CUSHION ASSEMBLY
(a) Remove the 4 bolts.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
(b) Remove the wire harness clamp from the seat cushion
assembly.
(c) Remove the seat cushion assembly.
H04740
2002 LEXUS LX470 (RM914U)
Author: Date: 2318
BO−126
BODY − FRONT SEAT
15. REMOVE SEAT CUSHION FRAME
(a) Remove the wire harness.
(b) Disengage the hook.
(c) Remove the 5 hog rings and seat cushion frame.
16. REMOVE SEAT CUSHION COVER (See page BO−128)
17. REMOVE SEAT HEATER (See page BO−128)
H04741
18. REMOVE RECLINING ADJUSTER INSIDE SHIELD
(a) Remove the 2 screws and LH reclining adjuster inside
shield.
(b) Remove the 2 screws and RH reclining adjuster inside
shield.
H04742
19. REMOVE SEAT POSITION CONTROL RELAY
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts and seat position control relay.
H04355
20. REMOVE LIFTER MOTOR
Remove the 2 screws and lifter motor.
H04743
2002 LEXUS LX470 (RM914U)
Author: Date: 2319
BO−127
BODY − FRONT SEAT
21. REMOVE FRONT VERTICAL MOTOR
Remove the 2 screws and front vertical motor.
H04744
22. REMOVE SLIDING MOTOR
Remove the 2 screws and sliding motor.
H04745
23. REMOVE RECLINING MOTOR
(a) Using a torx wrench, remove the reclining motor.
(b) Remove the 2 screws and reclining motor mounting
bracket from the reclining motor.
H04746
2002 LEXUS LX470 (RM914U)
Author: Date: 2320