Scribd
Upload
453 views2 pages

Onwo Foodsafe Vhvi Hydraulic Oils-2709 PDF

ONWO FOODSAFE VHVI HYDRAULIC OILS are food grade, non-toxic hydraulic oils designed for use in food processing equipment where incidental contact with food is possible. They are NSF H1 registered and meet USDA guidelines for safety. The oils provide excellent lubrication and temperature stability while reducing residue buildup compared to other oils. They are available in ISO viscosity grades 32, 46, and 68 and are recommended for use as hydraulic, compressor, bearing, and circulating oils anywhere within a food processing plant.

Uploaded by

novianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
453 views2 pages

Onwo Foodsafe Vhvi Hydraulic Oils-2709 PDF

ONWO FOODSAFE VHVI HYDRAULIC OILS are food grade, non-toxic hydraulic oils designed for use in food processing equipment where incidental contact with food is possible. They are NSF H1 registered and meet USDA guidelines for safety. The oils provide excellent lubrication and temperature stability while reducing residue buildup compared to other oils. They are available in ISO viscosity grades 32, 46, and 68 and are recommended for use as hydraulic, compressor, bearing, and circulating oils anywhere within a food processing plant.

Uploaded by

novianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FOODSAFE VHVI HYDRAULIC OILS

ONWO FOODSAFE VHVI HYDRAULIC OILS are food grade nontoxic oils designed for hydraulic
systems used in the food, drinks and pharmaceutical processing and packaging equipment.
These can also be used for other hydraulic systems where a clean, non-staining hydraulic fluid is
required. ONWO FOODSAFE HVI HYDRAULIC OILS are registered with NSF under category H1
and certified to be safe for incidental contact with food products.

Product Benefits:
ONWO FOODSAFE VHVI HYDRAULIC OILS offer low coefficient of friction, thereby resulting in
excellent lubrication and reduced wear. Synthetic oil provides excellent wide temperature
stability and ensures extended re-lubrication intervals. Low foaming of ONWO FOODSAFE VHVI
HYDRAULIC OILS reduces residue and scum build-up and enhances life.

ONWO FOODSAFE VHVI HYDRAULIC OILS are recommended for all food applications where ISO
VG 32 to 68 oil is recommended and where incidental contact with food stuff is possible. These
oils can be used as hydraulic, compressor, bearing and circulating oils in all areas within
the food processing plant and can be included as part of a HACCP plan. For change of oil,
it is recommended to follow the manufacturer’s instructions. It is important to purge the system
of the previous oil prior to recharging with ONWO FOODSAFE VHVI HYDRAULIC OILS.
Operating Temperature Range: -15 to +150 deg C

ONWO FOODSAFE VHVI HYDRAULIC OILS are available in packing of 5, 20, 27 litres plastic pails &
210 litres MS drums.
Please see overleaf for technical data.

All ingredients are FDA listed. ONWO FOODSAFE VHVI HYDRAULIC OILS are NSF H1 Registered and meet the USDA
1998 H1 guidelines. NSF Registration Nos. 138534, 138535 and 138536 for ONWO FOODSAFE VHVI HYDRAULIC OIL
32, 46 and 68 respectively.

This product contains no genetically modified ingredients and does not contain any nut oil or derivatives.
FOODSAFE VHVI HYDRAULIC OILS
(Continued)

ISO VG GRADE ISO VG GRADE ISO VG GRADE


Properties Test Method
32 46 68
Appearance Visual Bright & Clear Bright & Clear Bright & Clear
Synthetic oil- Synthetic oil- Synthetic oil-
Base Fluid ---
NSF Compliant NSF Compliant NSF Compliant
Density @ 29.5 °C, g/ml ASTM D4052 0.8352 0.8376 0.8450
Kinematic Viscosity @ 40°C, cSt ASTM D445 31.97 42.61 68.15
Kinematic Viscosity @ 100°C,cSt ASTM D445 5.9 7.2 9.35
Viscosity Index ( typical) ASTM D2270 120 120 115
Flash Point (COC), °C ASTM D92 210 240 242
Pour Point,°C ASTM D97 -21 -18 -15
Total Acid Number, mg KOH/gm ASTM D974 0.52 0.52 0.52
Copper Corrosion @ 100°C for 3 hrs ASTM D130 1b 1b 1b
Emulsion Characteristics @ 54°C ASTM D1401 40-39-1(5’) 40-39-1(10’) 40-39-1(15’)
Foaming Stability after 10 minutes
settling time, foam, ml
a) at 24°C 0/0 0/0 0/0
ASTM D892
b) at 93.5°C 0/0 0/0 0/0
c) at 24°C after cooling down from 0/0 0/0 0/0
93.5°C
Rust Preventive Characteristics ASTM D665 B Passes Passes Passes

For further details please contact:

RAJ PETRO SPECIALITIES PVT.LTD


nd
2 FLOOR, DOSHI TOWERS, 156 POONAMALLE HIGH ROAD, KILPAUK,
CHENNAI- 600010, INDIA
TEL”+91-44-42288900 to 42288910 FAX: +91-44-42288912
E-MAIL: [email protected]
OF08, OF09 & OF10_ ONWO 1709

You might also like