Scribd
Upload
669 views2 pages

Sel-487b-1 5a

This document provides a configuration summary for an SEL-487B Bus Differential and Breaker Failure Relay with part number 0487B124X52XC2XEHAEEEEX. The summary lists the selected firmware, conformal coating, power supply, connector type, inputs, communication protocols, ethernet connection options, voltages, mounting, chassis, and I/O board slot configurations. It also includes links to related accessories and diagrams for the device.

Uploaded by

Abelardo Estebanez Nieto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
669 views2 pages

Sel-487b-1 5a

This document provides a configuration summary for an SEL-487B Bus Differential and Breaker Failure Relay with part number 0487B124X52XC2XEHAEEEEX. The summary lists the selected firmware, conformal coating, power supply, connector type, inputs, communication protocols, ethernet connection options, voltages, mounting, chassis, and I/O board slot configurations. It also includes links to related accessories and diagrams for the device.

Uploaded by

Abelardo Estebanez Nieto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SEL-487B Bus Differential and Breaker Failure Relay | Configuration Summary Page 1 of 2

SEL-487B Bus Differential and Breaker


Failure Relay
Product Page | All Products Page

Configuration Summary
Numero de Parte 0487B124X52XC2XEHAEEEEX

Código de tecla 8929

Selected Options
Firmware Standard

Conformal Coat Conformal Coated Circuit Boards

Power Supply 48-125 Vdc or 110-120 Vac

Connector Type Screw Terminal Block

Secondary Inputs 5 Amp Phase

AC Input Channels 3 AC Voltage, 21 AC Current

Ethernet Communications Protocols FTP, Telnet, DNP3 LAN/WAN, and IEC 61850

Ethernet Connection Options Ports 5C, 5D: Ethernet Card with Two 100BASE-FX
Connectors

Mainboard Input Voltage 125 Vdc

Mounting Horizontal Rack Mount

Chassis 9U, Front Panel with 24 Target LEDs, 12 Operator Control


Pushbuttons, and Tri-Color LEDs

I/O Board Slot B; Control Input Voltage 125 Vdc or Vac with High-Speed Contact Outputs
for 7U or 9U Chassis

I/O Board Slot C; Control Input Voltage 125 Vdc or Vac with High-Speed Contact Outputs
for 7U or 9U Chassis

I/O Board Slot D; Control Input Voltage 125 Vdc or Vac with High-Speed Contact Outputs
for 9U Chassis Only

I/O Board Slot E; Control Input Voltage 125 Vdc or Vac with High-Speed Contact Outputs
for 9U Chassis Only

https://selinc.com/es/products/summary/?partNumber=0487B124X52XC2XEHAEEEEX 25/08/2017
SEL-487B Bus Differential and Breaker Failure Relay | Configuration Summary Page 2 of 2

Related Parts
These accessories have full, independent part numbers and are not installed at the SEL factory.
Accessories are packaged and shipped separately. Use these part numbers to order accessories
separately for installation.

Quantity Descripción Numero de Parte Price (USD)

Literature

Printed Instruction Manual PM487B-04


0

Diagramas
If you are unable to locate drawings for your specific part number, please contact your local
Customer Service Representative for assistance.

Drawing Formats

Drawing Type PDF DWG

Dimension PDF (101.39 kB) DWG (44.64 kB)

Front, Rear PDF (1.71 MB) DWG (7.34 MB)

Instructions PDF (1,004.61 kB)

https://selinc.com/es/products/summary/?partNumber=0487B124X52XC2XEHAEEEEX 25/08/2017

You might also like