GL&V Refiner Plates
Low Consistency-Cast Fillings for Disk Refiners
Equa-Flo® Plate Design
Working with customers over the years Technologies
we have made design improvements to Ultra Low Intensity Applications
provide improved capacity and better Narrow Bar patterns with reduced draft
pulp quality. Improvements include: angle for low intensity applications.
• Tapered master groove.
• Tapered full radius bar end profile. Low Flow Scenarios
• Equal fields per segment. The ta- Underhung Refiner Plates to satisfy
pered master groove provides bet- the refiner hydraulically and reduce
ter feeding of the refining zones. energy costs.
Underhung Refiner Plate/Tapered Master Groove
Conventional Draft Angle
Reduced Draft Angle
Alloys
A full range of alloys is available for all
applications:
Tapered Rounded Bar Edge Equal Fields – Master Groove Between Segments • High-Chrome White Iron
• NiHard
Application Experience With a tapered full radius bar end • Stainless Steel (440 C, 17-4 PH,
GL&V has over 160 years of refining profile there is less chance for fiber & CA40)
experience and supplies refiner plates or contamination accumulation further • Carburized Stainless Steel
to all major low consistency refiner improving hydraulics.
manufacturers (Beloit Jones, Andritz® We Service Our Customers By
TwinFlo™, Conflo™, etc). Working with For segmented plates each segment • Refiner process audits to provide
the GL&V Rebuild and Refiner Groups, has equal fields with a master groove • Optimum Fiber Quality
we supply complete refining solutions in between each segment which im- • Lower Operating Costs
to Optimize your Refining System. proves the hydraulic capacity of the • Flexible inventory programs
plates. Older designs have partial • Operation assistance
fields on each edge of the segments
where the bars don’t align causing a For additional technical details or
flow disruption and a pinch point which troubleshooting help, please contact
is detrimental to fiber development. your local GL&V representative or
our customer service department at
[email protected]
© 2016 GL&V. ALL RIGHTS RESERVED.
GL&V Refiner Plates
GL&V Refiner Plates
Customer
Location
Contact
Telephone
Date
Refiners
Designation
Serial Number
Disk Diameter
Plate Pattern
Bar Code
Km/rev
Motor
HP (kW)
RPM
Full Load Amps
Voltage
Refiner Power Setting
Amps
HP (kW)
nHPD/T (nkWh/t)
Pressure
Inlet
Outlet
Delta
Feed Forward Flow
USgpm (lpm)
Consistency, %
ODST/D (BDMt/d)
Refiner Flow
USgpm (lpm)
ODST/D (BDMt/d)
Freeness
Inlet
Outlet
Pulp Type
System Configuration
Batch/Continuous Recirculation: Y/N Series/Parallel
© Copyright 2010 GLV. 10/10 E-mail: [email protected] • www.glv.com
© 2016 GL&V. ALL RIGHTS RESERVED. E-mail:
[email protected]•find it all @ www.glvpulppaper.com
