Scribd
Upload
903 views1 page

Table 6-18 Tolerance Zones - External Dimensions (Shafts) (A14 ... A9, b14 ... b9) (Ansi b4.2)

The document shows tolerance zones in millimeters for external dimensions of shafts according to ANSI B4.2. It provides the acceptable upper and lower tolerance limits for shaft diameters ranging from over 0 to over 500 in increments of 3, 6, 10, etc. Smaller diameters have tighter tolerances while larger diameters have more tolerance allowed.

Uploaded by

RAVI KIRAN CHALLAGUNDLA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
903 views1 page

Table 6-18 Tolerance Zones - External Dimensions (Shafts) (A14 ... A9, b14 ... b9) (Ansi b4.2)

The document shows tolerance zones in millimeters for external dimensions of shafts according to ANSI B4.2. It provides the acceptable upper and lower tolerance limits for shaft diameters ranging from over 0 to over 500 in increments of 3, 6, 10, etc. Smaller diameters have tighter tolerances while larger diameters have more tolerance allowed.

Uploaded by

RAVI KIRAN CHALLAGUNDLA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TABLE 6-18 TOLERANCE ZONES - EXTERNAL DIMENSIONS (SHAFTS) (a14 ... a9, b14 ... b9) (ANSI B4.

2)
mm
SIZE a14 a13 a12 a11 a10 a9 b14 b13 b12 b11 b10 b9
OVER 0 -0.270 -0.270 -0.270 -0.270 -0.270 -0.270 -0.140 -0.140 -0.140 -0.140 -0.140 -0.140
TO 3 -0.520 -0.410 -0.370 -0.330 -0.310 -0.295 -0.390 -0.280 -0.240 -0.200 -0.180 -0.165
OVER 3 -0.270 -0.270 -0.270 -0.270 -0.270 -0.270 -0.140 -0.140 -0.140 -0.140 -0.140 -0.140
TO 6 -0.570 -0.450 -0.390 -0.345 -0.318 -0.300 -0.440 -0.320 -0.260 -0.215 -0.188 -0.170
OVER 6 -0.280 -0.280 -0.280 -0.280 -0.280 -0.280 -0.150 -0.150 -0.150 -0.150 -0.150 -0.150
TO 10 -0.640 -0.500 -0.430 -0.370 -0.338 -0.316 -0.510 -0.370 -0.300 -0.240 -0.208 -0.186
OVER 10 -0.290 -0.290 -0.290 -0.290 -0.290 -0.290 -0.150 -0.150 -0.150 -0.150 -0.150 -0.150
TO 14 -0.720 -0.560 -0.470 -0.400 -0.360 -0.333 -0.580 -0.420 -0.330 -0.260 -0.220 -0.193
OVER 14 -0.290 -0.290 -0.290 -0.290 -0.290 -0.290 -0.150 -0.150 -0.150 -0.150 -0.150 -0.150
TO 18 -0.720 -0.560 -0.470 -0.400 -0.360 -0.333 -0.580 -0.420 -0.330 -0.260 -0.220 -0.193
OVER 18 -0.300 -0.300 -0.300 -0.300 -0.300 -0.300 -0.160 -0.160 -0.160 -0.160 -0.160 -0.160
TO 24 -0.820 -0.630 -0.510 -0.430 -0.384 -0.352 -0.680 -0.490 -0.370 -0.290 -0.244 -0.212
OVER 24 -0.300 -0.300 -0.300 -0.300 -0.300 -0.300 -0.160 -0.160 -0.160 -0.160 -0.160 -0.160
TO 30 -0.820 -0.630 -0.510 -0.430 -0.384 -0.352 -0.680 -0.490 -0.370 -0.290 -0.244 -0.212
OVER 30 -0.310 -0.310 -0.310 -0.310 -0.310 -0.310 -0.170 -0.170 -0.170 -0.170 -0.170 -0.170
TO 40 -0.930 -0.700 -0.560 -0.470 -0.410 -0.372 -0.790 -0.560 -0.420 -0.330 -0.270 -0.232
OVER 40 -0.320 -0.320 -0.320 -0.320 -0.320 -0.320 -0.180 -0.180 -0.180 -0.180 -0.180 -0.180
TO 50 -0.940 -0.710 -0.570 -0.480 -0.420 -0.382 -0.800 -0.570 -0.430 -0.340 -0.280 -0.242
OVER 50 -0.340 -0.340 -0.340 -0.340 -0.340 -0.340 -0.190 -0.190 -0.190 -0.190 -0.190 -0.190
TO 65 -1.080 -0.800 -0.640 -0.530 -0.460 -0.414 -0.930 -0.650 -0.490 -0.380 -0.310 -0.264
OVER 65 -0.360 -0.360 -0.360 -0.360 -0.360 -0.360 -0.200 -0.200 -0.200 -0.200 -0.200 -0.200
TO 80 -1.100 -0.820 -0.660 -0.550 -0.480 -0.434 -0.940 -0.660 -0.500 -0.390 -0.320 -0.274
OVER 80 -0.380 -0.380 -0.380 -0.380 -0.380 -0.380 -0.220 -0.220 -0.220 -0.220 -0.220 -0.220
TO 100 -1.250 -0.920 -0.730 -0.600 -0.520 -0.467 -1.090 -0.760 -0.570 -0.440 -0.360 -0.307
OVER 100 -0.410 -0.410 -0.410 -0.410 -0.410 -0.410 -0.240 -0.240 -0.240 -0.240 -0.240 -0.240
TO 120 -1.280 -0.950 -0.760 -0.630 -0.550 -0.497 -1.110 -0.780 -0.590 -0.460 -0.380 -0.327
OVER 120 -0.460 -0.460 -0.460 -0.460 -0.460 -0.460 -0.260 -0.260 -0.260 -0.260 -0.260 -0.260
TO 140 -1.460 -1.090 -0.860 -0.710 -0.620 -0.560 -1.260 -0.890 -0.660 -0.510 -0.420 -0.360
OVER 140 -0.520 -0.520 -0.520 -0.520 -0.520 -0.520 -0.280 -0.280 -0.280 -0.280 -0.280 -0.280
TO 160 -1.520 -1.150 -0.920 -0.770 -0.680 -0.620 -1.280 -0.910 -0.680 -0.530 -0.440 -0.380
OVER 160 -0.580 -0.580 -0.580 -0.580 -0.580 -0.580 -0.310 -0.310 -0.310 -0.310 -0.310 -0.310
TO 180 -1.580 -1.210 -0.980 -0.830 -0.740 -0.680 -1.310 -0.940 -0.710 -0.560 -0.470 -0.410
OVER 180 -0.660 -0.660 -0.660 -0.660 -0.660 -0.660 -0.340 -0.340 -0.340 -0.340 -0.340 -0.340
TO 200 -1.810 -1.380 -1.120 -0.950 -0.845 -0.775 -1.490 -1.060 -0.800 -0.630 -0.525 -0.455
OVER 200 -0.740 -0.740 -0.740 -0.740 -0.740 -0.740 -0.380 -0.380 -0.380 -0.380 -0.380 -0.380
TO 225 -1.890 -1.460 -1.200 -1.030 -0.925 -0.855 -1.530 -1.100 -0.840 -0.670 -0.565 -0.495
OVER 225 -0.820 -0.820 -0.820 -0.820 -0.820 -0.820 -0.420 -0.420 -0.420 -0.420 -0.420 -0.420
TO 250 -1.970 -1.540 -1.280 -1.110 -1.005 -0.935 -1.570 -1.140 -0.880 -0.710 -0.605 -0.535
OVER 250 -0.920 -0.920 -0.920 -0.920 -0.920 -0.920 -0.480 -0.480 -0.480 -0.480 -0.480 -0.480
TO 280 -2.220 -1.730 -1.440 -1.240 -1.130 -1.050 -1.780 -1.290 -1.000 -0.800 -0.690 -0.610
OVER 280 -1.050 -1.050 -1.050 -1.050 -1.050 -1.050 -0.540 -0.540 -0.540 -0.540 -0.540 -0.540
TO 315 -2.350 -1.860 -1.570 -1.370 -1.260 -1.180 -1.840 -1.350 -1.060 -0.860 -0.750 -0.670
OVER 315 -1.200 -1.200 -1.200 -1.200 -1.200 -1.200 -0.600 -0.600 -0.600 -0.600 -0.600 -0.600
TO 355 -2.600 -2.090 -1.770 -1.560 -1.430 -1.340 -2.000 -1.490 -1.170 -0.960 -0.830 -0.740
OVER 355 -1.350 -1.350 -1.350 -1.350 -1.350 -1.350 -0.680 -0.680 -0.680 -0.680 -0.680 -0.680
TO 400 -2.750 -2.240 -1.920 -1.710 -1.580 -1.490 -2.080 -1.570 -1.250 -1.040 -0.910 -0.820
OVER 400 -1.500 -1.500 -1.500 -1.500 -1.500 -1.500 -0.760 -0.760 -0.760 -0.760 -0.760 -0.760
TO 450 -3.050 -2.470 -2.130 -1.900 -1.750 -1.655 -2.310 -1.730 -1.390 -1.160 -1.010 -0.915
OVER 450 -1.650 -1.650 -1.650 -1.650 -1.650 -1.650 -0.840 -0.840 -0.840 -0.840 -0.840 -0.840
TO 500 -3.200 -2.620 -2.280 -2.050 -1.900 -1.805 -2.390 -1.810 -1.470 -1.240 -1.090 -0.995

You might also like