Scribd
Upload
2K views

Reading Comprehension

Crude oil is found below land and water, from a few hundred feet below the surface to over 25,000 feet deep. It is brought to the surface through drilling or natural pressure/pumping. Petroleum products like gasoline and fuel oils are obtained through refining crude oil by heating it and condensing the vapors. The principal components of petroleum products are the hydrocarbons carbon and hydrogen, which form many thousands of possible compounds depending on how their atoms are arranged in the molecules.

Uploaded by

Nyam Leonardo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

Reading Comprehension

Crude oil is found below land and water, from a few hundred feet below the surface to over 25,000 feet deep. It is brought to the surface through drilling or natural pressure/pumping. Petroleum products like gasoline and fuel oils are obtained through refining crude oil by heating it and condensing the vapors. The principal components of petroleum products are the hydrocarbons carbon and hydrogen, which form many thousands of possible compounds depending on how their atoms are arranged in the molecules.

Uploaded by

Nyam Leonardo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Reading Comprehension

Read the text carefully and then answer the questions by choosing A, B, C, or D

Petroleum products, such as gasoline, kerosene, home heating oil, residual fuel oil,
and lubricating oils, come from one source – crude oil found below the earth’s surface, as
well as under large bodies of water, from a few hundred feet below the surface to as deep as
25,000 feet into the earth’s interior. Sometimes crude oil is secured by drilling a hole into the
earth, but more dry holes are drilled than those producing oil. Either pressure at the source or
pumping forces crude oil to the surface.
Crude oil wells flow at varying rates, from about ten to thousands of barrels per hour.
Petroleum products are always measured in forty-two-gallon barrels.
Petroleum products vary greatly in physical appearance: thin, thick, transparent, or
opaque, but regardless, their chemical composition is made up of only two elements: carbon
and hydrogen, which form compounds called hydrocarbons. Other chemical elements found
in union with the hydrocarbons are few and are classified as impurities. Trace elements are
also found, but in such minute quantities that they are disregarded. The combination of
carbon and hydrogen forms many thousands of compounds which are possible because of the
various positions and unions of these two atoms in the hydrocarbon molecule.
The various petroleum products are refined by heating crude oil and then condensing
the vapors. These products are the so-called light oils, such as gasoline, kerosene, and
distillate oil. The residue remaining after the light oils are distilled is known as heavy or
residual fuel oil and is used mostly for burning under biolers. Additional complicated refining
processes rearrange the chemical structure of the hydrocarbons to produce other products,
some of which are used to upgrade and increase the octane rating of various types of
gasoline.

Choose the one best answer, (A), (B), (C), or (D), to each question.
1. All of the following are true except
(A) crude oil is found below land and water.
(B) crude oil is always found a few hundred feet below the surface.
(C) pumping and pressure force crude oil to the surface.
(D) many petroleum products are obtained from crude oil.

2. The word “minute” in line 13 is closest in meaning to


(A) instant (B) huge
(C) insignificant (D) timely

3. Many thousands of hydrocarbon compounds are possible because


(A) the petroleum products vary greatly in physical appearance.
(B) complicated refining processes rearrange the chemical structure.
(C) the two atoms in the molecule assume many positions.
(D) the pressure needed to force it to the surface causes molecular transformation.
4. In line 21, the word “upgrade” is closest in meaning to
(A) improve (B) counteract
(C) charge (D) unite

5. Which of the following is true?


(A) The various petroleum products are produced by filtration.
(B) Heating and condensing produce the various products.
(C) Chemical separation is used to produce the various products.
(D) Mechanical means, such as centrifuging, are used to produce the various products.

6. The word “opaque” in line 10 means most nearly the same as


(A) transparent (B) turbid
(C) light (D) crude

7. How is crude oil brought to the surface?


(A) Expansion of the hydrocarbons.
(B) Pressure and pumping
(C) Vacuum created in the drilling pipe.
(D) Expansion and contraction of the earth’s surface.

8. All of the following are listed as light oils except


(A) Distillate oil (B) Gasoline
(C) Lubricating oil (D) Kerosene

9. What are the principal components of all petroleum products?


(A) Hydrogen and carbon (B) Residual fuel oils
(C) Crude oils (D) Refined substances

10. The word “condensing” in line 16 is nearest in meaning to


(A) cooling (B) expanding
(C) diluting (D) refuting

11. The word “they” in line 13 refers to


(A) impurities (B) minute quantities
(C) hydrocarbons (D) trace elements

You might also like