Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 1
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
1. PRODUCT AND COMPANY IDENTIFICATION
Trade name
REMAFIN-BLACK PE9N400201-ZN MX-S8013
Material number: PE9N400201
Recommended use:
Industry sector : Plastic processing industry.
Type of use : Additive for plastic material processing
Supplier name/address/telephone no.:
PTClariant Plastics & Coatings Indonesia
Gatot Subroto Km.4,Jl.Kalisabi No.1,Building 37,Kec. Cibodas
Tangerang, Indonesia 15138, Indonesia
Telephone : +62 21 5538589
Information about the substance/preparation
Product Safety : BU Masterbatches
+62 21 5538589
e-mail:
[email protected] Emergency telephone number: +62 21 5538589
2. HAZARDS IDENTIFICATION
GHS Classification
Not a dangerous substance according to GHS.
GHS label elements
Not a hazardous substance or mixture.
Other hazards which do not result in classification
Spilled granules give rise to a slipping hazard. Clean up immediately.
Spilled granules give rise to a slipping hazard. Clean up immediately.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature : Colourant preparation
Carrier: LDPE
Hazardous components
4. FIRST AID MEASURES
General advice : No special measures necessary.
If inhaled : No special measures necessary.
In case of skin contact : Cool skin rapidly with cold water after contact with molten
material.
Do not peel solidified product off the skin.
Get medical attention.
In case of eye contact : Obtain medical attention.
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes.
1/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 2
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
If swallowed : Do NOT induce vomiting.
Call in a physician immediately and show him the Safety Data
Sheet.
Most important symptoms : No symptoms known currently.
and effects, both acute and
delayed
5. FIREFIGHTING MEASURES
Suitable extinguishing media : Water spray jet
Foam
Carbon dioxide (CO2)
Dry powder
Unsuitable extinguishing : High volume water jet
media
Specific hazards during : In case of fire hazardous decomposition products may be
firefighting produced such as:
Carbon monoxide
Carbon dioxide (CO2)
Special protective equipment : Self-contained breathing apparatus
for firefighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, : See: Exposure controls and personal protection.
protective equipment and Sweep up to prevent slipping hazard.
emergency procedures
Environmental precautions : Do not allow to enter drains or waterways
Methods and materials for : Treat recovered material as described in the section "Disposal
containment and cleaning up considerations".
7. HANDLING AND STORAGE
Advice on protection against : Take measures to prevent the build up of electrostatic charge.
fire and explosion
Advice on safe handling : Ensure good general ventilation in the workplace; local
exhaust ventilation may be necessary, especially when
emptying containers.
Conditions for safe storage : Keep container tightly closed in a cool, well-ventilated place.
Protect from moisture.
Keep away from direct sunlight.
Materials to avoid : not required
2/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 3
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Engineering measures : No special measures necessary.
Personal protective equipment
Respiratory protection : In case of insufficient exhaust ventilation or prolonged
exposure use respiratory protection equipment.
Hand protection
Remarks : Leather gloves Nitrile rubber gloves. Minimum thickness
(glove): valid statement not possible. Minimum breakthrough
time (glove): valid statement not possible. These types of
protective gloves are offered by various manufacturers.
Please note the manufacturers´ detailed statements,
especially about the minimum thickness and the minimum
breakthrough time. Consider also the particular working
conditions under which the gloves are being used.
Eye protection : Safety glasses
Skin and body protection : Wear suitable protective clothing.
Protective measures : Observe the usual precautions for handling chemicals.
Hygiene measures : The usual Industrial Hygiene precautions must be taken
during work, in particular: do not drink, eat or smoke during
the handling of the product and clean hands and face during
work intervals and after work.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Granules
Colour : black
Odour : characteristic
Odour Threshold : not available
pH : Not applicable
Melting point : > 110 °C
Boiling point : Not applicable
Flash point : Not applicable
Evaporation rate : Not applicable
Self-ignition : Not applicable
Burning number : Not applicable
Upper explosion limit / upper : Not applicable
flammability limit
Lower explosion limit / Lower : Not applicable
flammability limit
3/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 4
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
Vapour pressure : Not applicable
Density : approx. 1,19 g/cm3
Value determined from data on raw material.
Solubility(ies)
Water solubility : insoluble
Partition coefficient: n- : Not applicable
octanol/water
Decomposition temperature : To the best of our current knowledge, no thermal
decomposition of the product is expected if it is processed
according to good manufacturing practices.
Viscosity
Viscosity, dynamic : Not applicable
10. STABILITY AND REACTIVITY
Possibility of hazardous : No dangerous reaction known under conditions of normal use.
reactions
Conditions to avoid : Temperatures exceeding thermal stability of the masterbatch.
Electrostatic charges.
Incompatible materials : not known
Hazardous decomposition : No decomposition if used as directed.
products
11. TOXICOLOGICAL INFORMATION
Acute toxicity
Product:
Acute oral toxicity : LD50 (Rat): > 2.000 mg/kg
Remarks: The product has not been tested. The information
is derived from the properties of the individual components.
Skin corrosion/irritation
Product:
Result : No skin irritation
Serious eye damage/eye irritation
Product:
Result : No eye irritation
Respiratory or skin sensitisation
Product:
Result : non-sensitizing
4/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 5
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
Aspiration toxicity
Product:
no data available
Further information
Product:
Remarks : Determined on raw material components.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Product:
Toxicity to soil dwelling : Remarks: not available
organisms
Plant toxicity : Remarks: not available
Persistence and degradability
Product:
Biodegradability : Remarks: not available
Physico-chemical : Remarks: The product can be separated out mechanically.
removability
Bioaccumulative potential
Product:
Bioaccumulation : Remarks: not available
Mobility in soil
no data available
Other adverse effects
Product:
Additional ecological : Do not allow to enter ground water, waterways or waste water.
information
13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Residual chemical should be subjected to waste
management, using an approved waste disposal contractor.
Contaminated packaging : Contaminated packaging material should be treated
equivalent to residual chemicals. Clean packaging material
should be subjected to waste management schemes
(recovery recycling, reuse) according to local legislation.
14. TRANSPORT INFORMATION
5/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 6
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
IATA not restricted
IMDG not restricted
15. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or
mixture
Not a dangerous substance or mixture according to the Globally Harmonised System (GHS).
Minister of Industry Regulation No. 23/M-IND/PER/4/2013 concerning the Revision of
Minister of Industry Regulation No. 87/M-IND/PER/9/2009 concerning Globally Harmonized
System of Classification and Labelling of Chemicals.
16. OTHER INFORMATION
Date format : yyyy/mm/dd
Full text of other abbreviations
AICS - Australian Inventory of Chemical Substances; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; CPR - Controlled Products Regulations; DIN -
Standard of the German Institute for Standardisation; DSL - Domestic Substances List (Canada);
ECx - Concentration associated with x% response; ELx - Loading rate associated with x%
response; EmS - Emergency Schedule; ENCS - Existing and New Chemical Substances (Japan);
ErCx - Concentration associated with x% growth rate response; ERG - Emergency Response
Guide; GHS - Globally Harmonized System; GLP - Good Laboratory Practice; IARC -
International Agency for Research on Cancer; IATA - International Air Transport Association; IBC
- International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals
in Bulk; IC50 - Half maximal inhibitory concentration; ICAO - International Civil Aviation
Organization; IECSC - Inventory of Existing Chemical Substances in China; IMDG - International
Maritime Dangerous Goods; IMO - International Maritime Organization; ISHL - Industrial Safety
and Health Law (Japan); ISO - International Organisation for Standardization; KECI - Korea
Existing Chemicals Inventory; LC50 - Lethal Concentration to 50 % of a test population; LD50 -
Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL - International
Convention for the Prevention of Pollution from Ships; n.o.s. - Not Otherwise Specified; Nch -
Chilean Norm; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL - No Observed
(Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NOM - Official Mexican
Norm; NTP - National Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD
- Organization for Economic Co-operation and Development; OPPTS - Office of Chemical Safety
and Pollution Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS -
Philippines Inventory of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure
Activity Relationship; REACH - Regulation (EC) No 1907/2006 of the European Parliament and of
the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals;
SADT - Self-Accelerating Decomposition Temperature; SDS - Safety Data Sheet; TCSI - Taiwan
Chemical Substance Inventory; TDG - Transportation of Dangerous Goods; TSCA - Toxic
Substances Control Act (United States); UN - United Nations; UNRTDG - United Nations
Recommendations on the Transport of Dangerous Goods; vPvB - Very Persistent and Very
Bioaccumulative; WHMIS - Workplace Hazardous Materials Information System
6/7
Material Safety Data Sheet
REMAFIN-BLACK PE9N400201-ZN MX-S8013 Page 7
Substance key: 000000416340 Revision Date: 27.03.2018
Version : 1 - 11 / RI Date of printing : 15.11.2019
This information corresponds to the present state of our knowledge and is intended as a general
description of our products and their possible applications. Clariant makes no warranties, express
or implied, as to the information's accuracy, adequacy, sufficiency or freedom from defect and
assumes no liability in connection with any use of this information. Any user of this product is
responsible for determining the suitability of Clariant's products for its particular application.
Nothing included in this information waives any of Clariant's General Terms and Conditions of
Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial
property rights must be observed. Due to possible changes in our products and applicable
national and international regulations and laws, the status of our products could change. Material
Safety Data Sheets providing safety precautions, that should be observed when handling or
storing Clariant products, are available upon request and are provided in compliance with
applicable law. You should obtain and review the applicable Material Safety Data Sheet
information before handling any of these products. For additional information, please contact
Clariant.
ID / EN
7/7
