Scribd
Upload
379 views

Gujarat Technological University: Semester - III Subject Name: Digital Electronics

This document outlines the course details for Digital Electronics, including the course content, teaching scheme, reference books, course outcomes, and list of experiments. The course covers topics such as binary systems, Boolean algebra, simplification of Boolean functions, combinational and sequential logic, registers, counters, memory units, and logic families. Students will apply knowledge of digital circuits, identify and solve problems involving combinational and sequential circuits, and select appropriate tools for circuit design. Evaluation includes theory and practical exams. Experiments involve implementing logic gates, combinational circuits, adders, encoders, counters, and flip-flops using digital ICs.

Uploaded by

Bhargavsinh Parmar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
379 views

Gujarat Technological University: Semester - III Subject Name: Digital Electronics

This document outlines the course details for Digital Electronics, including the course content, teaching scheme, reference books, course outcomes, and list of experiments. The course covers topics such as binary systems, Boolean algebra, simplification of Boolean functions, combinational and sequential logic, registers, counters, memory units, and logic families. Students will apply knowledge of digital circuits, identify and solve problems involving combinational and sequential circuits, and select appropriate tools for circuit design. Evaluation includes theory and practical exams. Experiments involve implementing logic gates, combinational circuits, adders, encoders, counters, and flip-flops using digital ICs.

Uploaded by

Bhargavsinh Parmar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

GUJARAT TECHNOLOGICAL UNIVERSITY

INSTRUMENTATION & CONTROL ENGINEERING (17)


Bachelor of Engineering
Subject Code: 3131704
Semester – III
Subject Name: Digital Electronics

Type of course: Professional Core Course

Prerequisite: NA

Rationale: Understanding of principle, operation and analysis of digital electronics

Teaching and Examination Scheme:

Teaching Scheme Credits Examination Marks Total


L T P C Theory Marks Practical Marks Marks
ESE (E) PA (M) ESE (V) PA (I)
4 0 2 5 70 30 30 20 150

Content:

Sr. No. Content Total


Hrs

1 BINARY SYSTEM: Digital computer and digital systems, Binary Number, Number base 3
conversion Octal and Hexadecimal Number, complements, Binary Codes, Binary Storage
and register, Binary Logic, Integrated Circuit

2 BOOLEAN ALGEBRA AND LOGIC GATES: Basic Definition, Axiomatic Definition of 5


Boolean Algebra, Basic Theorem and Properties of Boolean Algebra, Minterms And
Maxterms, Logic Operations, Digital Logic Gates, IC digital Logic Families

3 SIMPLIFICATION OF BOOLEAN FUNCIONS: Different types, K Map method, Product 5


of sum Simplification, NAND or NOR implementation, Don’t Care condition, Tabulation
method

4 COMBINATIONAL LOGIC: Introduction, Design Procedure, adder, subtractor, Code 5


Conversion, Universal Gate

5 COMBINATIONAL LOGIC WITH MSI AND LSI: Introduction, Binary Parallel Adder, 9
Decimal Adder, The look ahead carry Adder, Excess-3 Adder, Binary Multipliers, Parity
bit Generators/checkers, Magnitude Comparator, Encoder, Decoder, Multiplexer, De-
multiplexer, Hazards and hazards free realization .

6 SEQUENTIAL LOGIC: Introduction, Flip-Flops, Triggering of Flip-Flops, Analysis of 10

Page 1 of 3

w.e.f. AY 2018-19
GUJARAT TECHNOLOGICAL UNIVERSITY
INSTRUMENTATION & CONTROL ENGINEERING (17)
Bachelor of Engineering
Subject Code: 3131704
Clocked Sequential Circuits, State Reduction and Assignment, Flip-Flop Excitation
Tables, Design Procedure, Design of Counters, Design with State Equations, The finite
state model, Synthesis of synchronous sequential circuits, Serial Binary adder with Moore
type FSM, The sequence Detector, Mealy type model, Moore type circuit.

7 REGISTERS, COUNTERS AND THE MEMORY UNIT: Introduction, Registers, Shift 5


Registers, Ripple Counters, Synchronous Counters, Timing Sequences, Memory Unit,
RAM, ROM, EPROM, EEPROM, Flash Memory

8 REGISTERS TRANSFER LOGIC & MICRO OPERATION: Introduction, Inter-register 5


Transfer, Arithmetic, logic and shift Micro- Operations, Conditional Control Statements,
Fixed-Point Binary Data, overflow, Arithmetic Shifts, Decimal Data, Floating-Point Data,
Instruction Codes, Design of Simple Computer.

9 LOGIC FAMILIES: 5
Digital IC specification Terminology: Threshold voltage, Propagation Delay, Power
dissipation, Fan-in, Fan-out, Voltage and current parameters, Noise margin, Operating
Temperature, Speed power product.
Transistor Transistor Logic: Two input TTL NAND gate, Totem pole output, Current
sinking, Current sourcing, TTL loading and Fan-out.
Open Collector gates: Wired AND operation, Tri state TTL, Buffer/Drivers.

Suggested Specification table with Marks (Theory):

Distribution of Theory Marks

R Level U Level A Level N Level E Level C Level


21 21 14 7 7 7

Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C:


Create and above Levels (Revised Bloom’s Taxonomy)

Note: This specification table shall be treated as a general guideline for students and teachers. The actual
distribution of marks in the question paper may vary slightly from above table.

Reference Books:

1. M Morris Mano, “Digital Logic and Computer Design”,Person, LPE, 4th ed., 2009

2. A. Anandkumar, “Fundamentals of Digital circuits”, PHI, Second Edition.


3. Malvino& Leach, “Principle of Digital Electronics”, MCGraw-Hill, 2nded, 1975
4. R.P.Jain, “Modern Digital Electronics”, McGraw-Hill, 4th ed. 2010.
5. Boyce J. C., “Digital Logic: Operation and Analysis”, Prentice Hall, 2nded., 1982
Page 2 of 3

w.e.f. AY 2018-19
GUJARAT TECHNOLOGICAL UNIVERSITY
INSTRUMENTATION & CONTROL ENGINEERING (17)
Bachelor of Engineering
Subject Code: 3131704

Course Outcomes:

Sr. No. CO statement Marks %


weightage
CO-1 Apply knowledge of Boolean algebra and other minimization techniques for 30
digital circuit design.
CO-2 Identify, formulate and solve a problem based on combinational and 40
sequential circuits
CO-3 Select the appropriate hardware and software tools for combinational and 30
sequential circuit design.

List of Experiments:

1. Verification of logic gates using digital ICs and configuring NAND and NOR gates as universal
logic gates.
2. Implementation of Boolean Logic Functions using logic gates and combinational circuits, measure
digital logic gates specifications such as propagation delay, noise margin, Fan-in and Fan-out
3. Design and implementation of Binary Half adder, full adder, half subtractor, full subtractor, Parallel
adder.
4. Design and implementation of code converters.
5. Design and implementation of Encoder and Decoder.
6. Design and implement of Magnitude comparator.
7. Design and implementation of multiplexer and de-multiplexer.
8. Design and Implement JK-flip-flop, RS-flip-flop, D – flip-flop and T-flip-flop using digital Ics.
9. Design and implement universal shift registers using digital IC.
10. Design and implement Asynchronous and synchronous Counters.

Major Equipment: Digital Storage Oscilloscope (DSO), CROs, Multi-meters, Function generator, Bread
board trainer, Logic gate ICs

List of Open Source Software/learning website:

http://nptel.iitm.ac.in, http://vlab.co.in/

Page 3 of 3

w.e.f. AY 2018-19

You might also like