Siemens Industry, Inc.

Price List
100 Technology Drive 49023ER
Alpharetta, GA 30005 Revision 1
+1 (800) 333-7421

Commercial Rate Schedule for the

USA
January 01, 2019

Prices effective January 01, 2019 and

subject to the following terms: (a) change without Service Rates for
Engineering
notice; (b) the terms and conditions set forth herein.

Page 1 of 2

Siemens Industry, Inc. maintains a Description of Classifications of 4. Engineering – Level 4 services

highly-skilled staff of competent, trained Services: typically include, but are not limited to;
technicians, engineers, specialists and The following general guidelines are the provision of principal engineers,
consultants for the purpose of furnishing used to determine the rate applied to Sr. process experts or Sr. Systems
(1) Commissioning Services, (2) work performed. Engineers for consulting, system
Maintenance Services and (3) Consulting analysis, process studies,
Services related to Drives, Automation, The following hierarchy of documents optimization, architecture design, etc.
Motion Control Systems and Process shall control in the determination of
Control Systems at customer facilities or applicable rates; Foreign Engineering Service
at Siemens Industry, Inc. offices. Services commensurate with those listed
 Siemens Service Proposal above are also available to customers
Commissioning Services typically  Siemens Quick Quote serving foreign markets. Your local
include services related to the  Field Service Authorization Form Siemens Industry, Inc. representative can
supervision of the installation of  This document provide you with additional pricing
equipment and/or components such as information upon request.
drives, PLCs, HMIs, Process Automation This guideline and application thereof
Systems and may include the initial may be subject to change by Siemens Trade and Other classifications
testing, tuning and commissioning of the without notice. On selected jobs where it is practical to
equipment. utilize fitters, mechanics, winders, welders,
1. Engineering – Level 1 services machinists, etc. to perform a portion of the
Maintenance Services typically provide typically include, but are not limited work, their services will be provided at
continuing engineering services and to; commissioning, maintenance current local rates.
repair to maintain equipment or system and repair of commercial off the
integrity. shelf (COTS) systems utilizing Invoicing
multiple technologies, Unless otherwise specified in its
Consulting Services typically include troubleshooting of complex proposal, Siemens Industry, Inc. shall
engineering studies, tests and intermittent problems and site have the right to invoice the customer
evaluations including system or supervision of technicians. for all material delivered and work
equipment modification and special performed under this order at such
customer training programs. The exact 2. Engineering – Level 2 services times that it considers appropriate.
scope of services will vary from project typically include, but are not limited to;
to project and will be exclusively the provision of uniquely skilled or Terms and Conditions of Service
described in the agreement for such specialized personnel with expertise The Standard Terms and Conditions of
services. in the application, commissioning, Sales for Siemens Joint Product and
troubleshooting and analysis of Services Offering found at
Classifications of Engineering configured equipment or hardware http://www.industry.usa.siemens.com/to
Services systems utilizing single or multiple pics/us/en/standard-
Siemens Industry, Inc. offers the technologies. tandc/Documents/Siemens-Standard-
following classifications of engineering Terms-for-Joint-Product-and-Services-
services; 3. Engineering – Level 3 services Offering.pdf are incorporated by this
typically involve, but are not limited to; reference and made a part of this
1. Engineering – Level 1 the provision of personnel whose document.
2. Engineering – Level 2 specialized expertise and
3. Engineering – Level 3 certifications are required for the
4. Engineering – Level 4 commissioning of equipment, design
of processes, design of control
Rates for the above categories of software, Mechatronics Analysis,
services are listed on page 2 of this Architecture design, Nuclear
Price List. Certifications, etc.

Restricted © Siemens AG 2018

 Siemens Industry, Inc. Price List
100 Technology Drive 49023ER
Alpharetta, GA 30005 Revision 1
+1 (800) 333-7421

Commercial Rate Schedule for the

USA
January 01, 2019

Prices effective January 01, 2019 and

subject to the following terms: (a) change without Service Rates for
Engineering
notice; (b) the terms and conditions set forth herein.

Page 2 of 2

Classification / Rate Schedule

 Straight time rates apply to all time worked or traveled during

a normal eight-hour workday. The normal eight-hour workday is Special Training
defined as any consecutive eight-hour day shift period (Monday All time to complete site-specific training will be billed at the
through Friday, excluding holidays) between the hours of 7am applicable Service Level Hourly Rate indicated in the
and 7pm, with an allowance for lunchtime. Classification / Rate Schedule table provided above.

 Overtime rate applies to all hours worked or traveled outside Nuclear & Offshore
of the normal eight-hour workday or in excess of eight hours on The hourly rate for nuclear and offshore applications will be billed
weekdays and all time worked or traveled on Saturdays. at the applicable Service Level Hourly Rate x 1.20 due to the
special badging, qualifications, and certifications required by
 Premium rate applies to all hours worked or traveled on these applications.
Sundays and Holidays. Other Charges
The following charges will be applied in addition to the service
Hourly and Daily Rates do not include travel or living costs. rates outlined above;
Should the customer require additional documentation such as
copies of employee expense reports and/or expense receipts, a A. Expendable Small Tools, Special Tools and Equipment
written request must be submitted to Siemens Industry, Inc. When a particular job requires the furnishing of small
expendable tools or specialized tools, equipment, or instruments
Per Diem Rates not included in standard Field Service Representative “Truck
The Per Diem rates include Field Service Representative meals, Stock”, a charge will be made equal to either the cost of
ground transportation (vehicle mileage, tolls, parking, etc.) acquisition plus 15% or a rental charge, as appropriate. “Truck
incidental expenses and hotel expenses (if applicable). If Stock” is defined to include small standard hand tools, digital
required, airline travel mobilization and demobilization expenses multimeter, small scope, 500V insulator tester and 10A contact
will be invoiced at actual cost plus 15% in addition to Per Diem. resistance tester. Refer to Siemens Price List 49020B for Test
Travel time from the Field Service Representative’s home office Equipment Rental Charges.
to and from the job site will be billed separately. Consult your
local Siemens Industry, Inc. representative for additional B. Material Furnished by Siemens Industry, Inc.
information. All Siemens Industry, Inc. material used on the job will be billed
at current prices.
Standby Time
When service personnel are on the job site but unable to perform C. Material Purchased from Subcontractors or Other
services requested due to circumstances beyond Siemens Vendors
Industry, Inc. control, the customer will be charged up to eight Materials or services from Subcontractors or Vendors will be
hours per day standby time at applicable rates. billed at cost plus a handling fee.

Restricted © Siemens AG 2018