www.libratherm.com Certificate No.
IND86208
Microprocessor Based 32 channel Temperature Scanner and Data logger
RS-485 LINK
PC Software (optional)
DATALOG -V-32
Description:
Libratherm offers Microprocessor based 32 Channel Temperature / Process Scanner model
DATALOG-32V, which is most suitable for continuous monitoring of temperature or process
parameters at maximum 32 different locations. Each input has independent amplifier and hence
each can be selected for different type of input. All the channels are displayed with the respective
channel numbers. The front panel LED shows the Alarm status.
Datalog-32V offers common or individual high or low alarm set point with relay outputs, parallel
Centronics interface and / or serial PC interface. The built in Real Time Clock allows display of real
time and RS232/RS485 serial port allows data transfer on to the PC. Required data acquisition
software (DAS) operating on Windows (98, 2000, XP or Vista) is also offered for on line and off line
viewing of all the channels on the computer screen in both graphical and tabular representation.
Libratherm offers, standard and customized PC based software to meet user’s requirement.
Features:
Available in standard ½ DIN sizes.
Highly accurate and sturdy in operation.
Accuracy better than ±0.1% of the full scale.
Elegant looks, Very easy to operate.
Accepts standard inputs like thermocouple, RTD - Pt-100 2 or 3-wire input, etc.
Models with 4 to 32 inputs are available.
High quality membrane keypad
Power supply 230 VAC ± 10%, 60 / 50 Hz
PC compatible
Partners In Measurement And Control
401/402, Diamond Industrial Estate, Ketki Pada Road, Dahisar east, Mumbai 400068, Maharashtra, India.
Tel/Fax: 91-22-28963823, 28960569, 28964769. Email:
[email protected] [email protected] 1
www.libratherm.com Certificate No. IND86208
Technical Specifications:
Design Microprocessor based( 8 bit) with 12 bit ADC
No. Of channels 20,24,28 and 32 (as per user’s requirement)
Input RTD(Pt-100) / 3 wire or desired type of Thermocouple (to be specified by user)
Accuracy Better than ± 1 oC - Software Linearized.
Resolution 1oC / 0.1 oC (depends on specified calibration range)
Display 4 digits each 0.5" 7-segment red LED to display process and Alarm Set values.
2 digit 0.5" 7 segment red LED for channel number
Open Sensor/Input Display shows Flt-1 or Flt-2 and all outputs will be turned low.
Indication
Display Scan Rate 1 to 99 sec (programmable through front panel keyboard)
Sampling Rate 125mS (All 32 channels will be scanned in 4 seconds).
Skip/Hold Facility Available through key board in configuration mode
Key board 8 x 1 membrane keypad for data entry
Common Relay 2 nos. potential free change over contact
Outputs (1 each for high and low output but common for all the channels)
Individual Alarm 2 per channel i.e. 32 open collector outputs to drive external relay cards. Alarms Can
Outputs be configured for LL, HH, LH, HL) or can be grouped as per the specified requirement.
L – Low and H – High.
LED Indication 32 dual color LED's in the front indicating status of each alarm output
Serial Serial ( RS485 2 wire isolated) on mod bus ASCII protocol.
Interface
Size (WxHxD) 96 x 192 x 200 mm. (DATALOG-32-V)
Panel Cutout 92 x 186 mm + 0.5 mm
Supply 230VAC ± 15% (10VA), 50 Hz
Enclosure Metallic with ABS bezel and polycarbonate front fascia
PC BASED INTERFACING SOFTWARE (DAS): (Optional – can be supplied at additional cost)
Libratherm offers customized data logging software to meet various applications. The
communication between the data logger and the PC is established using RS 485 interfacing bus and
the data transfer are based on the MODBUS ASCII protocol. The supporting window based software
available on the CD is required to be pre loaded onto the computer.
When the PC is connected to the data logger, the data can be on line transferred to the PC where the
PC acts as a master and sends queries to the data logger to send the real time data channel number
and process values. The pc will process these data to store in the tabular as well as the graphical
format, which can be viewed on demand as on line or offline data. The software allows user to store
other information, such as, Company name, Batch number, process name, as well as certain
customized fields. This makes the software user friendly and dedicated to the requirement.
Partners In Measurement And Control
401/402, Diamond Industrial Estate, Ketki Pada Road, Dahisar east, Mumbai 400068, Maharashtra, India.
Tel/Fax: 91-22-28963823, 28960569, 28964769. Email:
[email protected] [email protected] 2
www.libratherm.com Certificate No. IND86208
The following screens shows such software features.
VARIOUS CONTROL PANEL USING DATALOG-16
32 channel panel 64 channel panel
VARIOUS PHOTOS SHOWING PC INTERFACE AND PANEL MOUNTING ARRANGEMENTS
Partners In Measurement And Control
401/402, Diamond Industrial Estate, Ketki Pada Road, Dahisar east, Mumbai 400068, Maharashtra, India.
Tel/Fax: 91-22-28963823, 28960569, 28964769. Email:
[email protected] [email protected] 3
