INDUSTRIAL SCANNERS

Scanners and Accessories

• Manual Scanners
• Motorized Scanners
• Accessories

920-145C_EN
 The Company Table of Contents
Olympus Corporation is an international
Scanners
company operating in industrial, medical, and
consumer markets, specializing in optics, elec- Scanner Technical Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
tronics, and precision engineering. Olympus Scanner Application Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
instruments contribute to the quality of prod- Manual One-Axis Scanner
ucts and add to the safety of infrastructure Mini-Wheel – Small Footprint Encoder. . . . . . . . . . . . . . . . . . . . . . . . 4
and facilities. HS10-X01 – PA General Purpose "Mouse Scanner" . . . . . . . . . . . . . 5
Olympus is a world-leading manufacturer of HydroFORM – Corrosion Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
innovative nondestructive testing and mea- COBRA – Weld Inspection of Small-Diameter Pipes . . . . . . . . . . . . 8
surement instruments that are used in indus- HST-X04 – TOFD Weld Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
trial and research applications ranging from HSMT-Compact – Weld Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 11
aerospace, power generation, petrochemical, HSMT-Flex – Weld Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
civil infrastructure, and automotive to consum- HSMT-X03 – Weld Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
er products. Leading-edge testing technologies Manual One or Two-Axes Scanner
include ultrasound, ultrasound phased array, CHAIN Scanner - Pipe Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
eddy current, eddy current array, microscopy, Motorized One-Axis Scanner
optical metrology, and X-ray fluorescence. Its WeldROVER – Weld Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
products include flaw detectors, thickness Manual Two-Axis Scanner
gages, industrial NDT systems and scanners,
GLIDER – Composites Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
videoscopes, borescopes, high-speed video
WING Scanner – Composite Inspection of Curved Surface. . . . . 20
cameras, microscopes, probes, and various
accessories. Accessories
Olympus NDT is based in Waltham, Mas- Couplant-Feed Units
sachusetts, USA, and has sales and service CFU03 and CFU05 – Electric Couplant-Feed Units . . . . . . . . . . . . . 21
centers in all principal industrial locations Manual Couplant-Feed Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
worldwide. Pulser and Preamplifiers
Visit www.olympus-ims.com for applications TRPP 5810 – Pulser/Preamplifier for TOFD Inspection. . . . . . . . . . 22
and sales assistance. 5682 – Preamplifier for TOFD Inspection . . . . . . . . . . . . . . . . . . . . . 23
PR-06-04 – Pulser/Preamplifier for Pulse-Echo Inspection. . . . . . . 23
Cables and Adaptors
Umbilical Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adaptors and Extension Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Interbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Yokes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Aqualene Elastomer Couplant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Phased arra
y InsPectIon Panametrics ®
s
Phased Array Ultrasonic Tra
Probes and We nsducers
dges wedges, cable
s, test blocks

• Contact
• Dual Elemen
t
• Angle Bea
m Probes
• Angle Beam
• Shear Wave
Scanners are usually not supplied with probes
• Immersion
• Integrated
Probes
Wedge
• Delay Line
• Protected F
ace
and wedges. For phased array probes and
• Curved Arra • Immersion
• Wedges
y Probes
• TOFD
• High Frequ
wedges, refer to the Phased Array Probe and
ency
• Atlas Europe
an Stand ard Wedges catalog; for UT probes and wedges,
refer to the Ultrasonic Transducers catalog.
920-041D-EN
920-165B-EN

2 www.olympus-ims.com
Scanners and Accessories
An important aspect that influences inspection quality is the capacity of precisely positioning the probes according to the surface being
inspected. Depending of the application, different constraints can occur that make the probe positioning difficult. Olympus offers a wide
range of industrial scanners and accessories in order to always help inspectors in their work as well as getting the best data acquisition
possible. Some of the applications covered by our scanner product line are: weld inspection, corrosion mapping, and aerospace. The
supported technologies are: phased array, conventional ultrasonic, TOFD, eddy current and eddy current array. The scanner configura-
tions can be of different types: one or two encoded axis as well as manual or motorized motion.

Scanner Technical Matrix

One-Axis Scanner X-Y Scanner

Inspection Technology Manual Motorized Manual

HSMT-Compact ™

HSMT-Flex™ CHAIN™ Scanner-XY

Conventional ultrasonics HSMT-X03™ WeldROVER™ GLIDER™
CHAIN Scanner-X WING™ Scanner
HST-X04™
HST-X04
HSMT-Compact
TOFD HSMT-Flex WeldROVER CHAIN Scanner-XY
HSMT-X03
CHAIN Scanner-X
Mini-Wheel™
HS10-X01™ Mini-Wheel + Indexer-Clicker
HydroFORM™ HS10-X01+ Indexer-Clicker
COBRA™ CHAIN Scanner-XY
Phased array WeldROVER
HSMT-Compact HydroFORM + CHAIN Scanner-XY
HSMT-Flex GLIDER
HSMT-X03 WING Scanner
CHAIN Scanner-X
HSMT-Compact
HSMT-Flex
Phased array and TOFD WeldROVER CHAIN Scanner-XY
HSMT-X03
CHAIN Scanner-X

Scanner Application Matrix

Scanner Model Weld Corrosion Aerospace
Mini-Wheel ✓ ✓ ✓
HS10-X01 ✓ ✓ ✓
HydroFORM ✓
HST-X04 ✓
COBRA ✓
HSMT-Compact ✓
HSMT-Flex ✓
HSMT-X03 ✓
WeldROVER ✓
CHAIN Scanner ✓ ✓
GLIDER ✓ ✓
WING Scanner ✓ ✓

3
 Manual One-Axis Scanner
Mini-Wheel – Small Footprint Encoder

FEATURES
• Waterproof (IP68)
• Stainless steel construction, resistant to
harsh environments
• Minimal noise induction
• Small dimensions
• Encoder resolution is engraved on the
wheel (12 steps/mm)
• Removable encoder wheel
• Double O-ring tire for better adherence
• Sealed bearing for long lasting smooth
wheel rotation
• Strain relief for cable protection
• Spring-loaded pin for adaptable encoder
attachment
• 2 M3 threaded holes on top of the casing
for rigid attachment
• DE version is compatible with the
OmniScan® instrument
• BX version is compatible with the
TomoScan FOCUS LT™ instrument
STANDARD INCLUSIONS
The Mini-Wheel encoder is used for the positioning and dimensioning of defects in
™ • 1 encoder with standard rubber wheel
the scan axis. It can synchronize data acquisition with probe movement. • 1 mounting bracket kit
The Mini-Wheel encoder is waterproof and compatible with the HST-X04 scanner, as • 1 hexagonal key screwdriver for bracket
attachment
well as Olympus standard PA wedges on which it can be mounted using the included
• Carrying case
bracket kit. This miniature encoder is entirely made of stainless steel and features
sealed bearings for long lasting smooth operation. The custom electronic circuit has OPTIONS
been designed to prevent noise induction in UT signals. Magnetic Wheel
SPECIFICATIONS For maximum adherence of the wheel on ferro-
magnetic surfaces, a magnetic wheel is available.
P/N: ENC1-A-MagWheel [U8902964]
Mounting Bracket Kit
D
Extra mounting bracket kit to mount Mini-
Wheel encoder on wedge.
RESOLUTION
12 steps/mm P/N: ENC1-BRACK [U8775120]
E
Indexer Clicker
C F Clicker to send the indexing signal needed for
B
2-axis inspections with only one encoder. The kit
A
also includes a 3-to-1 splitter cable (with DE-15
A = 27 mm (1.06 in.) D = 24.2 mm (0.95 in.) connectors) enabling connection of the encoder,
B = 28.7 mm (1.12 in.) E = 17.5 mm (0.69 in.) the Clicker, and a digital input source (DIN) to
the OmniScan.
C = 22.5 mm (0.89 in.) F = 6 mm (0.23 in.)
P/N: OPTX674 [U8775015]
ORDERING INFORMATION
Cable Length
Part Number Item Number Connector
(m)
ENC1-2.5-DE U8780197 2.5 DE-15
ENC1-5-DE U8780198 5.0 DE-15
ENC1-2.5-BX U8780196 2.5 Bendix
ENC1-5-BX U8840039 5.0 Bendix

4 www.olympus-ims.com
Manual One-Axis Scanner
HS10-X01 – PA General Purpose "Mouse Scanner"

FEATURES
• Encoded linear-scan (one axis) for phased
array
• 2 rubber wheels in contact with surface for
maximum adherence
• Easily clipped and spring-loaded yoke can
be positioned with 90º skew
• Encoder resolution: 5 steps/mm
• Durable aluminum casing
• Compatible with the OmniScan, the
TomoScan FOCUS LT™ (with optional
adaptor), and other instruments using the
appropriate encoder cable (not included)
STANDARD INCLUSIONS
• OmniScan-compatible 2.5 m encoder
cable
• 1 PA 40 mm × 55 mm yoke
• Carrying case
Note: Probes and wedges are not included with the scanner.

OPTIONS
TomoScan FOCUS LT Encoder Cable Adaptor
P/N: C1-DE15F-BXM-0.30M [U8767107]
Optional Yoke
The HS10-X01 is a mouse-type scanner designed for encoding phased array scans in
PA 55 mm × 55 mm yoke for SA4, and SA5 type
laboratory or production environments.
wedges
This scanner offers an efficient one-hand encoded manual-scan solution. The encoder P/N: AEIX0505 [U8779085]
wheels are specially made not to slip on wet surfaces.
Indexer Clicker
The yoke of the HS10-X01 is easy to set up on a IHC-type wedge by using standard
Clicker to send the indexing signal needed for
attachment holes. The spring loaded system is optimized to offer the lowest clearance 2-axis inspections with only one encoder. The kit
possible. The yoke is also attached to the scanner using a quick-connect system in also includes a 3-to-1 splitter cable (with DE-15
order to have the probe parallel or at a 90° skew according to the weld. connectors) enabling connection of the encoder,
the Clicker, and a digital input source (DIN) to
SPECIFICATIONS the OmniScan.
Probe-Holder Length in Scan Axis Width Height Weight P/N: OPTX674 [U8775015]
Position (mm) (mm) (mm) (kg)
Encoder cable
Front 178 66 41 0.3
OmniScan-compatible 5 m encoder cable
Side 80 165 41 0.3
P/N: EWUX1341-001 [U8779090]

5
 Manual One-Axis Scanner
HydroFORM – Corrosion Mapping

FEATURES
• First commercially available semi-
automated phased array product for
corrosion mapping applications.
-- Covers a 60 mm (2.36 in.) wide strip at a
speed up to 100 mm/s (4 in./s), with a 1 mm x
1 mm resolution
-- Reduced probe raster movement increases
safety for operators and improves mechanical
reliability
• Scanner concept creates a local immersion
technique that enables conforming to
rough and uneven surfaces.
-- Easy synchronization on front wall for OD and
ID corrosion monitoring
-- Wedge reflection is eliminated
-- Coupling is optimized
-- Low water requirements
• Patent-pending quick radius adjustment
allows inspection of different curvatures.
No wedges needed.
-- Convex surface: 4 in. OD, up to flat
-- Concave surface: 10 in. ID, up to flat
• HydroFORM can be attached to
automated or semi-automated scanners
and used independently as a manual
scanner.
• Cost effective
The HydroFORM scanner is designed to offer the best inspection solution for detect- • Minimal tools required for normal operation
ing wall thickness reductions due to corrosion, abrasion and erosion. In addition, STANDARD INCLUSIONS
HydroFORM detects mid-wall damage such as hydrogen induced blistering or manu-
HYDROFORM-K-MANUAL [U8775182]
facturing induced laminations and easily differentiates these anomalies from loss of
HydroFORM corrosion mapping scanner kit
wall thickness.
includes:
Using phased array ultrasound technol- coupling conditions for easy synchro- • Probe holder with water delay line
ogy, the HydroFORM offers high resolu- nization on front-wall echo for OD and • Carriage with 4 magnetic wheels
tion and fast coverage. The HydroFORM ID corrosion monitoring. No wedges are • One phased array probe
has a 60 mm wide effective beam and used with the HydroFORM. (7.5L64-I4-P-7.5-OM)
can scan at a speed up to 100 mm/s. The phased array technology also brings • 100 foam gaskets
In the current market place, motorized the ability to detect and characterize • Application-specific Mini-Wheel encoder
scanners, combined with small conven- various anomalies using ultrasonic com- • 7.5 m encoder cable extension
tional UT probes, need to reach ever- pression wave and angle beam inspec- • Irrigation tubing and accessories
higher raster speeds to be productive. tion techniques.
As a consequence of high speed raster
The HydroFORM can be used:
scanning, mechanical failures and poor
ultrasonic data quality can occur. In Manually: with supplied application-
addition, high raster scan speed creates specific Mini-Wheel encoder
a potentially unsafe environment for Semi-automatically: used in conjunction
operators. with the field-proven CHAIN Scanner.
Increased production rate combined The combination of OmniScan, Hydro-
with affordable equipment and compat- FORM and CHAIN Scanner creates a
ibility with existing Omniscan MXU battery-operated phased array corro-
acquisition unit makes the HydroFORM sion mapping system that is completely
a cost effective choice. portable.
HydroFORM uses an ingenious local
immersion concept allowing excellent
surface conformance and optimized

6 www.olympus-ims.com
CONFIGURATION
The HydroFORM corrosion mapping solution is based on multifunction equipment and software tools that you may already use to per-
form weld inspection:
• OmniScan PA flaw detector
• CHAIN Scanner
• TomoView software
Reduce the idle time of these instruments; increase your ROI, and broaden your service portfolio. The HydroFORM scanner is the perfect
complement to your existing Olympus equipment. In addition to weld inspection, you can now do corrosion mapping with minimal
equipment and training investment.

Patent-pending quick radius adjustment allows inspection of different curva-

tures without the need of wedges. HydroFORM also has an integrated encoder
necessary for manual inspections.

ORDERING INFORMATION
HYDROFORM-K-
Part Number Item Number Description
ADPCHAIN (U8750058)
HydroFORM scanner kit for manual one encoded axis
HYDROFORM-K-MANUAL U8775182
inspection ✔
HYDROFORM-A-ADPCHAIN U8750058 Accessory kit to adapt HydroFORM to CHAIN Scanner. ✔
CHAIN Scanner with 2 encoded axe s for pipe OD
CHAINScan-XY38 U8750041
up to 38 in.
CFU03 U8780008 Electric water pump and tubing (120 V and 220 V)
8 L manual water pump with irrigation tubes and
WTR-SPRAYER-8L U8775001 fittings
Note: for optimal results, the use of the CFU03 is recommended

HydroFORM-SP-FOAM U8775184 100 foam gaskets spare part kit

PHASED ARRAY PROBE

Frequency Number of Pitch Elevation Cable Connector
Part Number Item Number
(MHz) Elements (mm) (mm) Length (m) Type
7.5L64-I4-P-7.5-OM U8330955 7.5 64 1.0 7 7.5 OmniScan

SPECIFICATIONS
Scan speed: 100 mm per second
Effective beam width: 60 mm
Acquisition resolution: 1 mm x 1 mm
Encoder resolution: 8 steps/mm
Coverage (Index direction) with CHAIN Scanner: 300 mm
Vertical clearance: 100 mm

OmniScan MXU software displaying

C-scan view of corrosion.

7
 Manual One-Axis Scanner
COBRA – Weld Inspection of Small-Diameter Pipes

FEATURES
• Covers standard pipes from 0.84 in. to
4.5 in. OD (21 mm to 114 mm).
• Operates within 12 mm (0.5 in.) clearance
(on all standard pipes) permitting
inspections in limited access areas
• Can hold two phased array probes for
complete weld coverage in one pass
• Can be configured to make one-sided
inspections for pipe-to-component
evaluations
• Design provides stable and constant
pressure around the full circumference of
the pipe.
• Urethane wheels provide smooth radial
movement and limited axial drift
• Encoder resolution of 32 steps/mm
• Compact, lightweight, and portable
• Wedges and probes can be quickly and
easily changed.
• Distance between probes can be adjusted
from 0 mm to 55 mm
• Can be manipulated from one side of a
pipe.
The COBRA manual scanner combined with OmniScan® MX flaw detector and a • Spring-loaded scanner can be used on
16:128 module is used to perform circumferential weld inspection on small-diameter ferromagnetic and nonferromagnetic
pipes. The COBRA can hold two PA probes to inspect pipes with outside diameter pipes.
ranging from 0.84 in. to 4.5 in. • Waterproof, rust-free, and CE compliant
With its very slim design, this manual the full circumference of the pipe. This
scanner inspects pipes in limited ac- complete solution package is small and
cess areas where minimal clearance is lightweight for easy transport. The scan-
required. Adjacent obstructions such as ner is also waterproof, rust-free, and CE
piping, supports, and structures can be compliant.
as close as 12 mm (0.5 in.). This spring-
loaded scanner is designed to hold onto
carbon steel and stainless steel pipes of
various diameters using multiple link.
The COBRA scanner is characterized
by its smooth-rolling encoded move-
ment enabling precise data acquisition.
The scanner can hold two phased array
probes for a complete inspection of the
weld in one pass. For pipe-to-compo-
nent inspections, the scanner can be
quickly configured to make one-sided
inspections with only one probe.
This Olympus solution uses low-profile
phased array probes with optimized
elevation focusing, which improves the
detection of small defects in thin-wall
pipes. Specially designed low-profile
wedges that fit each pipe diameter
covered by the scanner, are also offered The A scanner on a 0.84 in. pipe with two PA probes and an OmniScan MX 16:128
to complete the solution. The COBRA displaying two PA groups with sectorial scans, A-scans, and C-scans.
scanner ensures stable, constant, and
strong pressure thus providing good UT
signals and precise encoding around

8 www.olympus-ims.com
CONFIGURATION
The typical configuration for the application uses: the COBRA scanner, two A15 low-profile phased array probes with SA15 wedges, the
Y probe adaptor, and the OmniScan MX PA 16:128 with the multigroup option.

ORDERING INFORMATION
Scanner Package
Part Number Item Number Description PN: COBRA-K-4.5
Small pipe scanner kit with encoder to cover 0.84 in. to 4.5 in.
COBRA U8750053
OD standard pipes; packaged in hard carrying case ✔
2 flat wedges plus 10 pairs of curved wedges to cover 0.84 in.
COBRA-A-SA15 U8721205
to 4.5 in. OD pipes ✔
7.5CCEV35-A15-P-2.5-OM U8779090 Low-profile phased array probe ✔ (x2)
COBRA-SP-BASIC U8775166 Basic spare parts kit
COBRA-SP-FULL U8775188 Basic spare parts kit, plus links and encoder assembly
Y-adaptor (splitter) with OmniScan connectors to support 2
OMNI-A-ADP05 U8767016
phased array probes
WTR-SPRAYER-4L U8775153 4 L manual water pump with irrigation tubes and fittings
WTR-SPRAYER-8L U8775001 8 L manual water pump with irrigation tubes and fittings
OMNI-P-PA16128 U8100029 OmniScan MX 16:128 with MXU software
OMNI-SO-MGROUP U8143007 Multigroup option for MXU software

PHASED ARRAY PROBE

Elevation
Cable
Freq. Number of Pitch Elevation Correspon­- Connector Curvature
Part Number Item Number Length
(MHz) Elements (mm) (mm) ding Wedge Type Radius
(m)
(mm)
7.5CCEV35-A15-P-2.5-OM U8330826 7.5 16 0.5 10 SA15 2.5 OmniScan 35

PHASED ARRAY WEDGES

The wedge part number for this application is SA15-N60S-IH-AODXXXX. This part number comprises the A15 probe type, normal probe
mounting, 60 degree refracted angle, shear wave, irrigation, and scanner mounting holes. The outside diameter curvature (XXXX) is de-
fined by referring to the different values for standard pipe outside diameters found in the table below (AOD).

STANDARD WEDGE AOD VALUES AND PIPE OD

AOD Minimum OD Maximum OD
(in.) (in.) (in.)
50 mm
0.84 0.800 0.840
1.05 0.840 1.050
1.315 1.050 1.315
1.66 1.315 1.660
1.9 1.660 1.900
2.375 1.900 2.375
2.875 2.375 2.875
3.5 2.875 3.500
4 3.500 4.000 The solution uses low-profile phased array probes
with optimized elevation focusing, which improves The COBRA scanner can also be configured for pipe-
4.5 4.000 4.500 the detection of small defects in thin-wall pipes. to-component weld inspections.

9
 Manual One-Axis Scanner
HST-X04 – TOFD Weld Inspection

FEATURES
• Encoded linear scan (one axis) for TOFD
or pulse-echo inspections with appropriate
yoke
• Waterproof spring-loaded encoder with
rubber wheel for maximum adherence on
inspected surfaces
• The encoder has a resolution of 12 steps/
mm and can be positioned parallel to the
weld or at a 90º skew
• Compact, light, and versatile
• Cost-effective
• Durable construction
• Can fit a full range of probes and wedges
including the CentraScan™ composite
product line (wedges must be 31.75 mm
wide)
• Probe-center separation (PCS) fully
adjustable from 17 mm to 180 mm
• Low-profile frame for use in constrained
areas
• Quick, tool-free release of wedges and
probe holders
• Compatible with the OmniScan, the
The HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, TomoScan FOCUS LT™ (with optional
low-cost, and versatile weld inspection solution. This manually deployed single-axis adaptor), and other instruments using the
scanner is designed to be used on plates, pipes, and curved surfaces such as the ones appropriate encoder cable (not included)
found on pressure vessels, storage tanks, and structural components. The HST-X04
operates either on flat surfaces or on pipes as small as 50 mm (2 in.) OD.
STANDARD INCLUSIONS
• Scanner with 150 mm frame and
OPTIONS supplementary 250 mm frame for wider
probe center separation
Preamplifier
• Two 10 MHz (3 mm element diameter)
5682 preamplifier. Refer to the accessories section on page 22. plus two 5 MHz (6 mm element diameter)
CentraScan™ composite TOFD probes
TomoScan FOCUS LT Encoder Cable Adaptor
• Three pairs of ST1 wedges with carbide
P/N: C1-DE15F-BXM-0.30M [U8767107] wear pins and irrigation holes for 45º, 60º,
and 70º inspection
SPECIFICATIONS
• Two 2.5 m LEMO 00 to Microdot
Frame Bar Length Length in Scan Axis Width Height transducer cables
(mm) (mm) (mm) (mm) • 2 LEMO 00 to BNC adaptors
150 60 190 50 • Spring-loaded, friction-driven, and
250 60 290 50 waterproof Mini-Wheel™ encoder for
X-axis or Y-axis data encoding (see page 5
for details)
ORDERING INFORMATIONS
• Brackets for flexible encoder positioning
Part Number Item Number Description • Carrying case
HST-X04 U8750007 Standard kit (see standard inclusions)
Scanner and Mini-Wheel™ encoder only
HST-X04-SCN U8779098
(no probes, wedges, and cables)
Scanner to hold 40 mm wide phased ar-
HST-X04-PA U8775137
ray wedges, and Mini‑Wheel encoder

10 www.olympus-ims.com
Manual One-Axis Scanner
HSMT-Compact – Weld Inspection

FEATURES
• Circumferential scan using up to 4
probes (UT or PA) on 4.5 in. OD pipes
(114.3 mm), or greater
• 4 plastic-covered magnetic wheels hold
the unit against a ferromagnetic inspection
surface.
• Light aluminum frame with customizable
width
• Frame design allows probes to be
positioned outside the wheels.
• Independently positioned and spring-
loaded probe holders
• Waterproof spring-loaded encoder with 12
steps/mm resolution
• Removable handles for lower profile
• Eyelet for umbilical attachment
• Integrated water manifold simplifies
couplant distribution
• Metric/US Customary unit rulers on
the scanner for easy probe separation
measurement
STANDARD INCLUSIONS
The HSMT-Compact™ is a manual one-axis encoded scanner designed for mainte- • Scanner frame with handles, and:
nance weld inspection. In particular, it is light and small, and also versatile. It can be -- 250 mm (10 in.) frame bar
used (with up to four probes) on plates and for circumferential scans on pipes as small -- 450 mm (18 in.) frame bar
as 4.5 in. OD pipes (114.3 mm). The scanner width can be changed and the frame -- 650 mm (26 in.) frame bar
can extend outside the limit of the wheels, providing a configuration that is well- • OmniScan-compatible waterproof spring-
suited for hard-to-reach places such as pipe-to-component welds. loaded wheel encoder with 5 m cable
• Four 90° probe holder brackets
• 4 spring-loaded arms (SLA)
• 4 TOFD–P/E 31.75 mm yokes
• 2 PA 40 mm × 55 mm yokes
• Irrigation tubing and accessories
• Carrying case
Note: Umbilical cable, probes, and wedges are not included with
the scanner.

SPECIFICATIONS
Length in
Width Height Weight
This configuration is well-suited for hard-to-reach places such as pipe-to-component welds. Scan Axis
(mm) (mm) (kg)
(mm)
94 + bar
OPTIONS 152 102 3.2
length
Divisible Cable Conduit Extra Probe Holder Kit
Refer to the accessories section on page 24. Set of two short spring-loaded arms (SLA)
mounted on 90º brackets.
Manual Couplant-Feed Units
P/N: OPTX0739 [U8779086]
Refer to the accessories section on page 21.
Yokes
Remote Pulser/Preamplifier
Refer to the accessories section on page 27.
Refer to the accessories section on page 22.
Replacement Encoder
TomoScan FOCUS LT Encoder Cable
P/N: ACIX895 [U8775097]
Adaptor
P/N: C1-DE15F-BXM-0.30M [U8767107] Spare Parts Kit
P/N: OPTX689 [U8775021]

11
 Manual One-Axis Scanner
HSMT-Flex – Weld Inspection

FEATURES
• Folding frame to optimize probe contact
on pipes
• 4 plastic-covered magnetic wheels hold
the unit against a ferromagnetic inspection
surface.
• Compact and versatile. The provided frame
bars allow size customization.
• Can support up to 4 conventional UT or
phased array probes on pipes
• Can support up to 8 conventional UT or
phased array probes on pipes bigger than
12 in. OD using optional standard probe
holder kit or on pipes from 4.5 in. to 12 in.
OD using optional pivoting probe holder
kit
• Light aluminum frame
• Independently positioned and spring-
loaded probe holders
• Waterproof spring-loaded encoder with 12
steps/mm resolution
• Removable handles for lower profile
• Eyelet for umbilical attachment
• Integrated water manifold simplifies
The HSMT-Flex™ is intended for one axis encoded inspection of circumference welds couplant distribution
on pipes of 4.5 in. OD (114.3 mm) and greater. The scanner comes equipped with • Metric/US Customary unit rulers on the
four probe holders but can be mounted with a total of eight probes with optional scanner frame for easy probe separation
probe holders. Mounted probes can be either phased array or conventional UT for measurement
most efficient inspections.
STANDARD INCLUSIONS
The major characteristic of the scanner is its capacity to bend in the center. This • Scanner frame with handles, and:
allows the scanner to fit on smaller pipes and also to bring the force of the spring- -- Two 340 mm (13.5 in.) frame bars
loaded arm in the radial direction of the pipes for better stability of the wedge, and
-- Two 500 mm (20 in.) frame bars
therefore, optimum data acquisition. For the same reason, optional probe holders that
• OmniScan-compatible waterproof spring-
are installed on the outside of the scanner can also pivot. loaded wheel encoder with 5 m cable
The HSMT-Flex also allows one of its side frames to slide. This feature allows having • Four 90º probe holder brackets
the probes mounted on the outside of the scanner. This provides a configuration that • 4 spring-loaded arms (SLA)
is well-suited for hard-to-reach places such as pipe-to-component welds. • 4 TOFD–P/E 31.75 mm yokes
OPTIONS • 2 PA 40 mm × 55 mm yokes
• Irrigation tubing and accessories
Umbilical Probe holder Kits Note: Umbilical cable, probes, and wedges are not included with
Refer to the accessories section on page 24. Set of two spring-loaded arms (SLA) the scanner.

Remote Pulser/Preamplifier
mounted on 90º brackets, to allow more SPECIFICATIONS
than four probes.
Refer to the accessories section on page 22. Length in
Standard–For pipes larger than 12 in. OD. Width Height Weight
Couplant-Feed Units Scan Axis
P/N: OPTX666 [U8775011] (mm) (mm) (kg)
Refer to the accessories section on page 21. (mm)
Pivoting–For pipes smaller than 12 in. OD. 263 466 147 4.4
Laser Guide Kit
Battery-operated laser-guiding device for P/N: OPTX0717 [U8775095]
easier weld tracking. Spare Parts Kits
P/N: HSMT-A-Laser [U8779087] For PV-100 applications
Yokes P/N: OPTX686 [U8775020]
Refer to the accessories section on page 27. For PV-200 applications
TomoScan FOCUS LT Encoder Cable P/N: OPTX690 [U8775022]
Adaptor The hinged design of the HSMT-Flex
P/N: C1-DE15F-BXM-0.30M [U8767107] scanner enables inspection of pipes
as small as 4.5 in. OD.
Replacement encoder
P/N: ADIX1255 [U8775096]

12 www.olympus-ims.com
Manual One-Axis Scanner
HSMT-X03 – Weld Inspection

FEATURES
• Can support up to 10 phased array or
conventional UT probes1 on pipes of
38 in. OD (965 mm) and greater
• The provided frame bars allow size
customization.
• 4 plastic-covered magnetic wheels
that rotate 90º to allow scans in both
directions, and to hold the unit against a
ferromagnetic inspection surface
• Light, aluminum frame
• Independently positioned and spring-
loaded probe holders
• Waterproof spring-loaded encoder with
12 steps/mm resolution
• Eyelet for umbilical attachment
• Metric/US Customary unit rulers on the
scanner frame for easy probe-separation
measurement
STANDARD INCLUSIONS
• Scanner frame with handles, and:
-- Three 300 mm (12 in.) frame bars
-- Two 200 mm (8 in.) frame bars
The HSMT-X03 is the construction weld scanner offering the most probe-holding • 3 additional 200 mm (8 in.) and two
capacity. In fact, the scanner can hold up to 10 probes1 for either phased array or additional 125 mm (5 in.) frame bars
conventional UT, in order to obtain optimal coverage of the entire weld volume. allow smaller footprint configuration or
inspection on pipes with smaller diameter.
Its solid construction guarantee the stability needed for precise data acquisition. The
• OmniScan-compatible waterproof spring-
frame width can also be reconfigured to fit restrained spaces using the shorter sup-
loaded wheel encoder with 5 m cable
plied frame bars.
• Six 90º probe holder brackets
• 6 spring-loaded arms (SLA)
OPTIONS
• 6 TOFD–P/E 31.75 mm yokes
Umbilical Frame Extensions • 2 PA 40 mm × 55 mm yokes
Refer to the accessories section on page 24. A pair of side-mounted frame bars allows • Water manifold
greater probe separation for inspecting • Irrigation tubing and accessories
Remote Pulser/Preamplifier thicker welds. Note: Umbilical cable, probes, and wedges are not included with
Refer to the accessories section on page 22. P/N: OPTX684 [U8775019] the scanner.

Couplant-Feed Units Standard Probe Holder Kit

SPECIFICATIONS
Refer to the accessories section on page 21. Length in
Set of two spring-loaded arms (SLA) Width Height Weight
Scan Axis
Laser Guide Kit mounted on 90º brackets.
(mm)
(mm) (mm) (kg)
Battery-operated, laser-guiding device for P/N: OPTX666 [U8775011]
279 413 131 3.2
easier weld tracking. Spare Parts Kits
P/N: HSMT-A-Laser [U8779087] For PV-100 applications
Yokes P/N: OPTX686 [U8775020]
Refer to the accessories section on page 27. For PV-200 applications
TomoScan FOCUS LT Encoder Cable P/N: OPTX690 [U8775022]
Adaptor
P/N: C1-DE15F-BXM-0.30M [U8767107]
Replacement encoder
P/N: ADIX1255 [U8775096]

1  Standard inclusions allow the use of 6 probes. Optional parts must be purchased to use 10 probes.

13
 Manual One or Two-Axes Scanner
CHAIN Scanner - Pipe Inspection

FEATURES
• Standard configuration using one or two
probes and optional configuration using
four probes for TOFD, phased array, or
pulse-echo inspections.
• Pipe range with outside diameters from
1.75 in. to 38 in. (45 mm to 965 mm)
• Encoded manual scan on one or two axis
(depend on the model)
• Ergonomic handle to protect encoder
connectors and provide cable
management
• Independent chain links mounted on
bearings wheels coated with urethane for
smooth rolling
• Easy clamping device for quick scanner
positioning
• Spring-loaded probe holders ensuring
good probe contact in any scanner
position or orientation
• The majority of adjustments can be made
without the use of tools
• Compatible with the OmniScan®, the
TomoScan FOCUS LT™ (with optional
adaptor), and other instruments using the
The CHAIN™ scanner is the optimum, manual pipe-inspection solution for a pipe appropriate encoder cable
range with outside diameter of 1.75 in. to 38 in. (45 mm to 965 mm) and the possibil-
ity of two encoded axes. The scanner, which is held by chain links instead of mag- STANDARD INCLUSIONS
netic wheels, is able to inspect ferromagnetic or nonferromagnetic surfaces. The chain • Main module with a scan-axis encoder
links also help ensure a straight displacement of the scanner as it eliminates steering • Chain links for 5 in., 16 in., or 38 in. pipe
problems. Finally, it is useful when the area around the pipe is not entirely accessible OD (depending on model) with quick-
as the scanner can be rotated around the pipe using the chain links. release adjustable buckle
• 5 m encoder cable for OmniScan
MAIN APPLICATIONS • 450 mm (17.7 in.) probe-holder bar
• Circumferential-pipe weld • 2 spring-loaded probe holders with 2
inspections with phased array, TOFD, adjustable PA yokes
or conventional UT • 2 adjustable TOFD–P/E yokes
• Corrosion mapping of small areas • Probe-positioning system with lead screw
with phased array or conventional adjustment
UT (using XY; 2 encoder models) • 5 m divisible cable conduit
(19 mm ID)
• Irrigation tubes and fittings
• CHAIN Scanner custom tool
• Carrying case
Note: Probes and wedges are not included with the scanner.

Probe-positioning system with lead screw adjustment

14 www.olympus-ims.com
SPECIFICATIONS OPTIONS
Length in TomoScan FOCUS LT Encoder Cable Chain Links
Width Height Weight
Scan Axis Adaptor
(mm) (mm) (kg) CHAIN Scanner short link. Required on pipe
(mm)
P/N: C1-DE15F-BXM-0.30M [U8767107] OD less than 9.6 in.
114 75 84 1 P/N: ChainScan-A-Slink [U8775127]
Note: specifications above apply to the main module Remote Pulser/Preamplifier
CHAIN Scanner long link. To be used on
Refer to the accessories section on page 22. pipe OD greater than 9.6 in.
Encoder resolution:
Circumferential (X) axis: 19.2 steps/mm Couplant-Feed Units P/N: ChainScan-A-LgLink [U8750042]
Longitudinal (Y) axis: 226.8 steps/mm Refer to the accessories section on page 21. Spare Parts Kit
Basic spare part kit for the CHAIN Scanner
P/N: Chainscan-sp-basic [U8779370]

2 Additional Probe Package Mouse Ppackage Short Bar Package

Needed to perform inspections with four Needed to use the CHAIN Scanner as a 20 cm probe-holder bar and lead screw kit
probes on the CHAIN Scanner. mouse scanner with magnetic-wheel holding for confined space applications.
P/N: ChainScan-A-4Probe [U8775128] system instead of chain links. P/N: ChainScan-A-SBar [U8775129]
P/N: ChainScan-A-mouse [U8750037]

ORDERING INFORMATION
Part Number Item Number Description
ChainScan-X5 U8750036 CHAIN™ Scanner for 45 mm to 125 mm OD (1.75 in. to 5 in.) pipes with 1 encoded axis
ChainScan-XY5 U8750044 CHAIN Scanner for 45 mm to 125 mm OD (1.75 in. to 5 in.) pipes with 2 encoded axes
ChainScan-X16 U8750045 CHAIN Scanner for 45 mm to 400 mm OD (1.75 in. to 16 in.) pipes with 1 encoded axis
ChainScan-XY16 U8750046 CHAIN Scanner for 45 mm to 400 mm OD (1.75 in. to 16 in.) pipes with 2 encoded axes
ChainScan-X38 U8750040 CHAIN Scanner for 45 mm to 965 mm OD (1.75 in. to 38 in.) pipes with 1 encoded axis
ChainScan-XY38 U8750041 CHAIN Scanner for 45 mm to 965 mm OD (1.75 in. to 38 in.) pipes with 2 encoded axes

15
 Motorized One-Axis Scanner
WeldROVER – Weld Inspection

FEATURES
• Can support up to 6 probes for TOFD,
phased array, or pulse-echo inspections
• Constant scanning speed control for
smooth data acquisition at any speeds
• Compact motion controller allowing 10
different scan speeds from 5 mm/s to
50 mm/s
• Simple two-button remote control for
jog or constant encoded motion either in
backwards or forward direction
• Data acquisition using OmniScan or
TomoScan FOCUS LT1 instrumentation
with less than 5 minutes configuration
time
• The four industrial-strength magnetic
wheels are driven for use on ferromagnetic
surface
• Integrated water manifold for simple and
efficient couplant delivery
• Emergency-stop button located on the
scanner
• Laser guide indicator helps the operator
to follow the weld centerline or any other
The WeldROVER™ is a perfect addition to the Olympus family of scanners for custom- inspection reference
ers that require a more stable inspection than can be provided by manual scanners, • Room to integrate a remote pulser/
and in a more economical package than the high-production zone-discrimination preamplifier for improved TOFD–P/E
systems typically used in offshore pipeline construction. inspections
• Divisible cable conduit umbilical offers
The WeldROVER is a simple, industrial-strength, one-axis encoded scanner that provides cable protection and configuration
the customer with a fully mechanized automated data acquisition. It is designed to make flexibility. Minimal time needed for probe
fast and efficient phased array inspections on ferromagnetic piping or vessel girth welds reconfiguration.
and long seams with minimum training and setup time. The scanner can be configured • Waterproof (IP65)
with up to six probes for phased array, TOFD, and conventional UT inspection.
The WeldROVER could not be easier to use. It is operated by a simple two-button
remote control with variable speeds. The scanner interfaces with the OmniScan® MX
or TomoScan FOCUS LT1 directly without the need for complex software, motion con-
troller electronics, or configuration. Use of the laser-guide indicator helps the operator
to manually adjust the scanner direction using the steering lever. This allows acquiring
precision data without the need for guide bands, complex tracking systems, or motor-
ized steering capability. It is the perfect fit for the company offering fully mechanized,
automated phased array (AUT) inspection services. Less than one hour of training is
required for any customer that has completed the basic OmniScan® course.

CONFIGURATIONS Longitudinal scan

Supports up to six probes at the front of the scanner on pipes
A typical configuration is two PA probes • Supports up to six probes at the front from 16 in. OD and up for circumferential scans and from
and one or two pairs of TOFD probes to of the scanner on pipes from 30 in. 30 in. OD and up for longitudinal scans.

comply with the ASME codes. OD and up

Circumferential scan 1  Interface with TomoScan FOCUS LT™ can be made using

• Supports two probes at the back and the optional encoder cable adaptor
two at the front of the scanner on
pipes from 4 in. OD and up
• Supports up to four probes at the front
of the scanner on pipes from 12 in.
OD and up
• Supports up to six probes at the front
of the scanner on pipes from 16 in. Supports two probes at the back and two probes at the front
OD and up of the scanner on pipes from 4 in. OD and up.

16 www.olympus-ims.com
 STANDARD INCLUSIONS Instrument case
• Motorized scanner with rotating • Laser guide and holder Modular instrument and accessories hard-
probe-holder arms at the front and • Two steering lever carrying case. The modules can be used to
back of the scanner • 5 m divisible conduit for cable transform the scanner case into a workstation.
• 2 frame bars for probe-holder fixation protection and attachment to the P/N: WELDROVER-A-ICASE [U8775123]
of 200 mm (8 in.) and one of 377 mm scanner.
(14.8 in.) TomoScan FOCUS LT Encoder Cable
• Irrigation tubing and fittings
• Remote control with 5 m cable Adaptor
• Scanner and accessories carrying case
• MCDC-01: one-axis DC motion Note: All cables for scanner operation are 5 m. P/N: C1-DE15F-BXM-0.30M [U8767107]
controller Probes and wedges are not included with the scanner.
Yokes
• Power supply OPTIONS Refer to the accessories section on page 27.
• Encoder cables linking MCDC-01 to
Couplant-Feed Units Spare Parts Kit
the OmniScan®
• 6 spring-loaded arms (SLA) pivoting Refer to the accessories section on page 21.
Basic spare part kit for the WeldROVER
probe holders and all brackets needed Remote Pulser/Preamplifier Scanner
for the different configurations
Refer to the accessories section on page 22. P/N: WeldROVER-A-SPKit [U8775122]
• 4 TOFD–P/E 31.75 mm yokes
• 2 PA 40 mm × 55 mm yokes Extra spring-loaded probe Holder
• 2 PA 40 mm × 65 mm yokes for PWZ1 P/N: WELDROVER-A-SLA [U8775125]
and A14 probes
Extra Laser Guide
• 2 PA 40 mm × 46 mm yokes
P/N: WELDROVER-A-LASER [U8775124]

YER-8L)
aptor Integrated water manifold
Data acquisition can be handled completely by the simplifies couplant distribution Room to integrate a remote
OPTX0719) OmniScan (not included in WeldROVER package). pulser/preamplifier for improved
TOFD and PE inspections
Laser guide for better
A-LASER) weld tracking
ard-carrying case. Emergency-stop button
the scanner case

Steering lever to manually

PKIT) adjust the scanner direction

fier

82)
g information table)
ADIX689)

0-to-LEMO-00-

0-to-Microdot-

O-00-to-Microdot-

nformation table)
T connections

5)
ADIX655)
Z1 probes

Divisible cable conduit umbilical

for cable protection and attachment
Light and compact aluminum frame to scanner

Independently spring- Rotating probe-holder arms for Eyelet for lanyard attachment
nd
loaded arm (SLA) adaptation to different diameters
al) probe holders
MCDC-01: one axis Easy to operate using a simple remote
DC motion controller control featuring 2 push-buttons and Four driven magnetic wheels firmly hold the
one rotary switch scanner against ferromagnetic inspection surface.

SPECIFICATIONS Standard inclusions

240 VAC, Length Width Height Weight
Component
• Motorized scanner with rotating probe-holder arms at the front
and back of the scanner (mm)
• 2 PA 40 mm x 55 mm yokes
Scanner speed: 5 mm to 50 mm per (mm) • (mm)
2 PA 40 mm x 65 mm yokes for PWZ1 and A14 probes (kg)
• 2 frame bars of 200 mm (8 in.) and one of 377 mm (14,8 in.) • 2 PA 40 mm × 46 mm yokes
second Scanner with for
long bar fixation
probe-holder • Irrigation tubing and fittings
Length (mm) Width (mm) Height (mm) Weight (kg) 430
• Remote control with 5 m cable 380 • 175
Laser guide and holder 12.0
Encoder
430 resolution:
380 2100 steps/mm
175 (typical)
12.0 and 6 probes
• MCDC-01: one-axis DC motion controller • Two steering levers
380 200 175 11.0 • Encoder cables linking MCDC-01 to the OmniScan® • 5 m divisible conduit for cable protection and attachment to
Power consumption: 90 W Scanner with small
• 6 spring-loaded arms (SLA) pivoting probe holders and all
175 110 60 1.5 380
brackets needed for the different configurations 200 the scanner.
175 11.0
200 85 50 1.0 bars and 4 probes • Power supply
Maximum input current: 4 A
230 50 90 0.8
• 4 TOFD–P/E 31.75 mm yokes • Scanner and accessories hard carrying case
MCDC-01 motion Note: All cables for scanner operation are 5 m.
Voltage: 24 VDC 175 110 60 1.5
Probes and wedges are not included with the scanner.
controller
Power supply input voltage: 100 VAC to
Power supply 200 85 50 1.0
240 VAC, autoswitching
Remote control 230 50 90 0.8

17
 Manual Two-Axis Scanner
GLIDER – Composites Inspection

FEATURES
• Well-suited for phased array UT,
conventional UT, and eddy current
inspection techniques using one probe
• Compatible with the OmniScan®, the
TomoScan FOCUS LT™ (with optional
adaptor), and other instruments using the
appropriate encoder cable.
• 2 axes with waterproof encoders for
position-encoded X-Y scans
• Axis positioning with minimal backlash
• Both modules are mounted on bearings for
precise and smooth displacement
• 2 pivot-equipped mounting pods enable
surface following
• Locking devices allow each axis to be
locked
• Module displacement can be in
increments of 3.27 mm or in free-running
mode
• The probe holder is mounted on a bearing-
arm system that can be spring loaded if
needed.
Photo used with the permission of Avior, Produits Intégrés • Aluminum frame is used for lightweight
and rust-free components
The GLIDER™ X-Y scanner is a two-axis encoding scanner for the manual inspection • The Y axis can be easily shortened for
of slightly curved or flat composite surfaces. smaller surface radius inspection, or be
The scanner is well-suited for raster There are two encoder modules (one on removed for easier transportation
scanning with the following technolo- each axis) to measure the probe posi- STANDARD INCLUSIONS
gies: tion. The displacement of these modules • 2 tracks for desired stroke
• Conventional ultrasonics (UT) can be in 3.27 mm steps, free running, (18 in., 24 in., or 36 in., depending on the
• Phased array ultrasonics (PA) or locked. model)
• Eddy current (EC) The scanner comes in three formats • 2 displacement-encoding modules
• Eddy current array (ECA) (18 in., 24 in., and 36 in.), depending • 2 suction-cup mounting pods
Commonly inspected materials in- on the scan coverage needed: • 2 OmniScan-compatible encoder with 5 m
clude composites and aluminum, using cable
• GLIDER 18×18
suction-cup pods; and carbon steel, • 1 PA 40 mm × 55 mm yoke
• GLIDER 24×24
using optional magnetic pods. • 1 TOFD–P/E 31.75 mm yoke
• GLIDER 36×36
• 90° probe holder mounting bracket
APPLICATIONS • 180° probe holder mounting bracket
• Inspection of composites • 45°, 90°, 180° adjustable probe holder
• Inspection of airplane fuselages for mounting bracket
delamination and cracking • Probe holder bearing arm with springs
• Inspection of ferromagnetic plates • Irrigation tubing and fitting
for corrosion • Carrying case
• Inspection of friction stir welds Note: Umbilical cable, probes, and wedges are not included with
(FSW) on aluminum the scanner.

DESIGN CHARACTERISTICS
The X-axis is attached to two mounting
pods. Depending on the material to be
inspected, one of the following models
can be used:
• Suction-cup mounting pod
(included)
• Magnetic mounting pod (optional)

18 www.olympus-ims.com
 SPECIFICATIONS OPTIONS
Weight: 5 kg to 8 kg, depending on the configuration Magnetic accessories package
Suction-cup pod holding force: 7 kg per cup Magnetic mounting pods and y-axis support enable use on ferromag-
Magnetic-pod holding force: 81 kg per base netic surfaces.
P/N: GLIDER-A-01 [U8775058]
Encoder resolution: 13 steps/mm (±0.15 step/mm), 330 steps/in.
(±0.006 step/in.)
Minimum curvature for partial scans: 50 cm (20 in.), OD

Interchangeable mounting pods

(magnetic pods are optional)

X-axis encoder
Tracks
module 457 mm, 610 mm, 914 mm, (18 in., 24 in., or 36 in.) tracks are
X-axis lock available as options.
X-axis increment knob
Part Number [Item Number]
Pivot lock for
Encoder 1
mounting pod Stroke
X- Axis Y-Axis
X-axis mm (in.)
GLIDER-A-X18 GLIDER-A-Y18
457 (18)
[U8775059] [U8775062]
Encoder 2 GLIDER-A-X24 GLIDER-A-Y24
Y-axis 610 (24)
Y-axis quick increment
[U8775060] [U8775063]
release knob
GLIDER-A-X36 GLIDER-A-Y36
Y-axis 914 (36)
Y-axis [U8775061] [U8775064]
lock

Bearing arm
Encoder cables
Mounting pod
Y-Axis Stroke
Part Number Item Number
Probe holder mm (in.)
Probe holder 457 (18) GLIDER-18X18-C-5M U8800464
mounting bracket
610 (24) GLIDER-24X24-C-5M U8800465
Y-axis encoder
Y-axis 914 (36) GLIDER-36X36-C-5M U8800466
module support
Note: If the scanner is modified with an Y-axis track longer than the original one, the en-
coder cable must be changed as well in order to benefit from the maximum stoke

TomoScan FOCUS LT Encoder Cable Adaptor

P/N: C1-DE15F-BXM-0.30M [U8767107]
Yokes
Refer to the accessories section on page 27.
Couplant-Feed Units
Refer to the accessories section on page 21.

ORDERING INFORMATION
Length (X) Width (Y) Height
Part Number Item Number Description
(mm) (mm) (mm)
GLIDER scanner with X-Y 457 mm × 457 mm stroke
GLIDER-18X18 U8750001 700 690 152
(18 in. × 18  in.)
GLIDER scanner with X-Y 610 mm × 610 mm stroke
GLIDER-24X24 U8750002 900 845 152
(24 in. × 24  in.)
GLIDER scanner with X-Y 914 mm × 914 mm stroke
GLIDER-36X36 U8750003 1200 1150 152
(36 in. × 36  in.)

19
 Manual Two-Axis Scanner
WING Scanner – Composite Inspection of Curved Surface

FEATURES
• Two encoded axes for X-Y scans
• Axis positioning with minimal backlash
• Vacuum cups mounted on the flexible
axis ease installation on both concave and
convex nonferromagnetic surfaces.
• Scanner can be used vertically or
upsidedown using Venturi vacuum cups
(WING Scanner “V” models only).
NOTE: The scanner must always be secured with a lanyard
when used on vertical or upsidedown surfaces.
• Suitable for phased array and
conventional UT inspection techniques
using one probe
• Can operate with an OmniScan® or
TomoScan FOCUS LT™ acquisition unit.
• Also available in a manually activated
vacuum-cup version that eliminates the
need for air supply (WING Scanner H1
model)
Flexible X-axis
• Very flexible contour-following track
Photo used with the permission of Avior, Produits Intégrés • Encoder module follows the flexible track
(resolution: 39.7 steps/mm).
The WING™ Scanner is a two-axis scanner for manual ultrasonic inspections. One • Locking lever on the encoder module
scanning axis is flexible and conforms to the contour of the part being inspected. • Integrated loop on one end to secure the
Vacuum cups make the WING Scanner well-suited for nonferromagnetic surface scanner against accidental falls.
inspections.
Rigid Y-axis
Typical applications include the inspection of friction stir welding (FSW) and the inspec- • 16 mm diameter hard-anodized
tion to detect delamination, cracks, and corrosion on plates and airplane fuselage. aluminum shaft with stainless steel
toothed rack
SPECIFICATIONS AND ORDERING INFORMATION
• Shaft is mounted on a pivot, allowing
Part Number constant contact between the probe and
Wing- Wing- Wing- the part.
[Item Number] scanner-V1 scanner-V2 scanner-H1 • Shaft does not move under its own weight
Specifications [U8750016] [U8750030] [U8750031] when the indexing dial is engaged.
X-axis stroke (mm) 940 1940 940 • Fully adjustable and tool-free, probe-
alignment device
Y-axis stroke (mm) 510 510 510 • Indexing increments: 0.5 mm and 1 mm
Venturi with Venturi with Manually ac- • Axis-locking thumb screw
Vacuum generation*
air supply air supply tivated levers
STANDARD INCLUSIONS
Minimum external radius (mm) 360 380 450 • Two integrated encoders for X and Y axes
Minimum internal radius (mm) 770 770 770 • 5 m encoder cable compatible with
Holding force (kg/cup) 30 30 11 TomoScan FOCUS LT™, and OmniScan®
using supplied adaptor
Number of cups 10 19 8 • Adjustable probe holder
Total weight (kg) 6.3 8.8 7.0 • 1 PA 40 mm × 55 mm yoke
Overall scanner length (X-axis) (mm) 1395 2395 1120 • 1 TOFD–P/E 31.75 mm yoke
• Irrigation tubing and fitting
Overall scanner length (Y-axis) (mm) 790 790 790
• Transport case
Total height (mm) 157 157 165 Note: Umbilical cable, probes, and wedges are not included with
the scanner.
* For “V” models, compressed air characteristics must correspond to the following specifications:
Required pressure: 490 kPa to 690 kPa (71 psi to 100 psi) OPTIONS
Flow rate: 566 nl/min (20 SCFM) minimum
Couplant-Feed Units
Refer to the accessories section on page 21.

20 www.olympus-ims.com
Couplant-Feed Units

CFU03 FEATURES
• Diaphragm pump with a flow of 3.78 l/
min (1 GPM ) at 60 psi
• Internal bypass ensures that the pump is
always primed.
• Works on 100 VAC and 240 VAC
• Start/Stop button
• Outlet flow control valve
• Pump inlet tube is equipped with a filter
and a check valve to ensure that the tube
is always filled.
• Inlet and outlet quick-connect fittings
• Rugged plastic case
• CE certified
CFU05 FEATURES
The CFU05 has the same features as the
CFU03 plus:
• Water suction generated by a Venturi
system using an external compressed air
supply
CFU05 CFU03
STANDARD INCLUSIONS
• 3.3 m (10 ft), 9.5 mm (3⁄8 in.) ID tube for
CFU03 and CFU05 – Electric Couplant-Feed Units pump inlet with filter and check valve
• 3.3 m (10 ft), 9.5 mm (3⁄8 in.) ID tube for
The CFU03 and CFU05 are portable electric-pump units used to supply couplant vacuum outlet (CFU05 only)
to wedges during ultrasonic inspections. Both units are equipped with a diaphragm • 3.3 m (10 ft), 5 mm (3⁄16 in.) ID tube and
pump that has a bypass to ensure a constant flow and to avoid any pump priming Y-adaptor for pump outlet
issues. The pump units also have a valve to control the outlet flow. The CFU05 fea- • 3.3 m (10 ft), 5 mm (3⁄16 in.) ID tube and
tures water-suction capability to reduce water loss when used with some water delay Y-adaptor for vacuum inlet (CFU05 only)
line wedges. • Power supply, 100 VAC to 240 VAC input
to 24 VDC output

Manual Couplant-Feed Units

The manual-pump unit offers a affordable and efficient way to supply couplant to
wedges during automated inspections.

FEATURES
• Reservoir capacity of 4 L or 8 L
• Flow valve
• Supplied tubes: 8 mm OD and 5 mm ID
• Sling for easy transportation
ORDERING INFORMATION
Part Number Item Number Description
CFU03 U8780008 Electric couplant-feed unit
Electric couplant-feed unit with suction
CFU05 U8780009
capability
4 L manual water pump with irrigation
WTR-SPRAYER-4L U8775153
tubes and fittings
WTR-SPRAYER-8L 8 L manual water pump with irrigation
WTR-SPRAYER-8L U8775001
tubes and fittings

www.olympus-ims.com 21
 Pulsers and Preamplifiers

FEATURES
• Withstands pulsed voltages up to 300 V for
pulse widths in excess of 500 ns at PRF up
to 10 kHz.
• Dimensions (W × H × L):
57 mm × 32 mm × 90 mm
• Weight: 300 g
• UT connectors: 8 × LEMO 00 female
• Water/moisture resistance:
NEMA 4-IP66. Rustproof.
• Powered by an external 12 VDC source or
from the instrument.
• Power connector: Compatible with
standard Olympus umbilical cables (male
Fisher 103 type)
TRPP 5810 – Pulser/Preamplifier for TOFD Inspection • Red power-on LED indicator
The TRPP 5810™ unit is a high-performance remote pulser/preamplifier dedicated to • Operating temperature range:
TOFD inspections and compatible with the Olympus scanner line as well as PV-100 –10 °C to 60 °C
and PV-200 weld-inspection systems. SPECIFICATIONS
This remote pulser/preamplifier provides an optimum signal-to-noise ratio for TOFD Pulser
inspections by combining a 40 dB preamplifier with a remote high-voltage (200 V)
• Remote, high-voltage (200 V) pulse
pulse repeater in a single, small enclosure. The TRPP 5810 supports two UT channels,
repeater
enabling simultaneous inspection with one or two pairs of TOFD probes.
• PRF of up to 10 kHz at 100 ns per channel
The TRPP 5810 can be used as a pulser and/or preamplifier.
and up to 20 kHz at 50 ns for a single
TRPP 5810 as a Pulser channel
• Provides an additional pulse gain in order • Pulser-side outputs protected against
to generate a stronger signal when needed misuse and improper connection from the
Preamplifier instrument outputs.
to reveal difficult-to-detect flaws.
TRPP 5810 as a Preamplifier Preamplifier (Receiver)
Pulser • 40 dB preamplifier
• Provides the additional gain or broadband
signal-to-noise enhancement necessary To probes • Accommodates probe frequency range
for optimum signal acquisition on thick from 1 MHz to 15 MHz.
sections of material exhibiting high • Preamplifier-side inputs and outputs
ultrasonic attenuation. protected against misuse and improper
• Allows driving of long cables from Preamplifier connection from the instrument outputs.
remotely located sensors. OPTIONS
Pulser
Power Cable (from TomoScan FOCUS LT)
ORDERING INFORMATION To instrument 5 m power supply cable linking to TomoScan
FOCUS LT™
Part Number Item Number Package Contents
P/N: TRPP-5810-A-01 [U8800488]
Pulser/Preamplifier, 5 m power supply cable
(120 VAC to 240 VAC input to 12 VDC out-
Power Cable (from OmniScan)
TRPP-5810 U8120042 10 m power supply cable linking to OmniScan®
put) and 5 m power supply cable linking to an
OmniScan®; all packaged in a carrying case P/N: TRPP-A-PWRC-OM-10M [U8775118]
Same as P/N TRPP-5810 plus: Transformer and Cable
4 × 0.6 m UT probe cables (LEMO 00 to
TRPP-5810-KIT01 U8120043 Microdot) and brackets to attach TRPP 5810 Transformer (120 VAC to 240 VAC input to
to HSMT-type scanner 12 VDC output) with 10 m power supply cable
(P/N: HSMT-A-BRK5810 [U8779088]) P/N: TRPP-A-PWRC-AC-10M [U8779168]
Same as P/N TRPP-5810-KIT01 plus:
TRPP-5810-INST U8775114 4 × 5 m UT cables (LEMO 00 to LEMO 00)
linking TRPP 5810 to instrument
Same as P/N TRPP-5810-KIT01 plus:
TRPP-5810-UMB U8775113 4 × 0.6 m UT cables (LEMO 00 to LEMO 00)
linking TRPP 5810 to umbilical

22 www.olympus-ims.com
5682 – Preamplifier for TOFD Inspection
The 5682 ultrasonic preamplifier provides low-noise amplification of ultrasonic signals (for one probe) ranging from 500 kHz to 25 MHz.
The preamplifier, housed in a rugged splashproof enclosure, is very small and lightweight making it ideally suited for remote applica-
tions. The preamplifier can be powered with either a single 9 V battery (included) for up to 50 hours of continuous operation or an op-
tional 9 V to 13 V DC supply. When battery operated, a multicolored LED provides feedback on battery status. This preamplifier is ideal
for TOFD inspections.

SPECIFICATIONS
• 30 dB gain
• 50 hours of battery life (continuous discharge)
• Continuous power-level indicator
• 67 dB signal-to-noise ratio
• Weight: 180 g with battery

5682-KIT01
ORDERING INFORMATION
Part Number Item Number Package Contents
5682 U8120006 5682 preamplifier and 9 V battery
5682 preamplifier, one 2.5 m UT probe cable (LEMO 00 to LEMO 00), 2.5 m power
5682-KIT01 U8120038
supply cable linking to OmniScan® and belt case
5682 preamplifier, one 5 m UT probe cable (LEMO 00 to LEMO 00), one 0.6 m UT
probe cable (LEMO 00 to Microdot), 5 m power supply cable linking to OmniScan®,
5682-KIT02 U8779091
belt case, bracket to attach the 5682 to HSMT-type scanners
(P/N: HSMT-A-BRK5682 [U8779089])
5682-A-PWRC-OM-5M U8775119 5 m power supply cable linking to OmniScan
5682-A-PWRC-UMB-0.15M U8779092 Power cable adaptor linking 5682 preamplifier to umbilical cable

PR-06-04 – Pulser/Preamplifier for Pulse-Echo Inspection

The PR-06-04 is a four-channel pulser/preamplifier for pulse-echo. Each channel can drive a conventional UT probe for a higher gain
pulse as well as boosting the return signal, therefore improving detection and signal-to-noise ratio.
The PR-06-04 can also be used as a pulser or a receiver only.

SPECIFICATIONS
Pulser
• –45 V to –220 V input level (min-max)
• –160 V to –190 V output amplitude (pulser at 100 ns)
• 4 ns to 10 ns rise time and fall time
Receiver
• 40 dB gain
• 8 dBm to 12 dBm input level (max.)
• 8 dBm to 12 dBm output level operation
• 550 kHz to 30 MHz bandwidth at –3 dB

ORDERING INFORMATION
Part Number Item Number Package Contents
PR-06-04 U8750028 PR-06-04 pulser/preamplifier
PR-06-04 pulser/preamplifier, 4 × 0.6 m UT probe cable (LEMO 00 to 90° Microdot),
OPTX667 U8775012 bracket to attached the unit to an HSMT-type scanner
(P/N: HSMT-A-BRKEX [U8779090])
Note: Those packages have been created to be used with an umbilical cable with an integrated power cable. If no such umbilical is used, an optional power cable must be ordered.
Because of power requirements, the PR-06-04 cannot be connected to the OmniScan power output.

OPTIONS
Transformer and Cable
Transformer (120 VAC to 240 VAC input to 12 VDC output) with 5 m power supply cable. P/N: TRPP-5810-A-03 [U8800490]
Transformer (120 VAC to 240 VAC input to 12 VDC output) with 10 m power supply cable. P/N: TRPP-A-PWRC-AC-10M [U8779168]

23
 Cables and Adaptors
Umbilical Cables
Umbilical cables are used to make all the connections between the scanner and the acquisition unit. They can be of two types:
• Closed umbilical
• Divisible conduit
Closed umbilical
The closed-type umbilical offers the best rugged protection. It cov-
ers the cable with a resistant, waterproof and dust proof conduit.
It is also always fitted with a safety hook on both ends. It comes in
different models according to applications and scanners for which
it is intended to be used. The configuration of the cables is fixed
and cannot be changed afterwards.
Note: Encoder cable for UMB1 interfaces to OmniScan instrument. For TomoScan FOCUS LT™
interface, the optional adaptor must be ordered (P/N: C1-DE15F-BXM-0.30M [U8767107]).

ORDERING INFORMATION FOR UMBILICAL CABLES

UMB-UTPA0202-10-RO
Umbilical cable type UT and PA cables Cable length Power cables

Umbilical cable type IBTx = Interbox with 2 PA probe Power cables

UMB1 = Umbilical for HSMT scanners OmniScan connectors, R = Remote pulser/receiver or
UT and PA cables TRPP 5810™, and x (0, 4, or 8) Interbox power cable with
UT = RG174 coaxial cables for extra UT channels transformer (120 V to 240 V)
conventional UT probes IBx = Interbox with 2 PA probe RO = Remote pulser/receiver or
PA or OmniScan connectors, and Interbox power cable linking to
PA0000 = 128 elements PA probe extension x (0, 4, or 8) UT channels OmniScan® or AC-using adaptor
PA0202 = 124 elements PA probe extension Cable length
with 4 LEMO 00 at pin 63–64 and 5 = 5 m
127–128 10 = 10 m
20 = 20 m

Divisible conduit
The divisible type is composed of two split shells that protect the
cables entirely. Even if it is not as rugged as the closed-type um-
bilical, it offers other advantages. In fact, since the cables can be
changed inside at any time, there is no need to have connection
boxes often needed for PA probes on the scanners. The probes
must have the proper cable length to reach the acquisition unit.

ORDERING INFORMATION
Part Number Item Number Description
0.3 m divisible cable conduit with 16 mm ID. Well-suited for 2 × PA, irrigation tube, and
60BA5028 U8779093
encoder cable.
0.3 m divisible cable conduit with 19.2 mm ID. Well-suited for 2 × PA, 2 × conventional
60BA0109 U8779094
UT, irrigation tube, and encoder cable.
0.3 m divisible cable conduit with 24.2 mm ID. Well-suited for 2 × PA, 4 × conventional
60BA0131 U8775093
UT, irrigation tube, encoder, and preamplifier’s power supply cables.
5 m divisible cable conduit with 24.2 mm ID. Well-suited for 2 × PA, 4 × conventional UT,
OPTX0719 U8779095 irrigation tube, encoder and preamplifier’s power supply cables. Standard equipment of
WeldROVER™ scanner.

24 www.olympus-ims.com
Adaptors and Extension Cables
Part Number Item Number Description
Adaptors

Adaptor for Hypertronics™ PA probe to instrument with

OMNI-A-ADP03 U8767014
an OmniScan® connector

Y-adaptor with OmniScan connectors to support 2 PA

OMNI-A-ADP05 U8767016 probes with a maximum of 64 elements each.
Connector layout: 1 female output and 2 male inputs.

Adaptor for up to 8 conventional UT probes with

LEMO 00 connectors to an instrument with an
OMNI-A-ADP11 U8767019 OmniScan connector.
Enables the use of conventional UT probes with a PA
instrument.

Adaptor for up to 16 conventional UT probes with

LEMO 00 connectors to an instrument with an
OMNI-A-ADP12 U8767020 OmniScan connector. Supplied with a 1 m cable.
Enables the use of conventional UT probes with a PA
instrument.

Phased Array Extension cables (Common models)

E128P0-0202-OM U8800635 Extension cable with an OmniScan connector at
both ends. If equipped with 4 conventional UT probe
E128P5-0004-OM U8800441 LEMO 00 connectors, 124 elements out of 128 are
available for phased array use.
E128P5-0202-OM U8800442 Enables the simultaneous use of conventional UT and
PA probes with a PA instrument.
E128P10-0004-OM U8800431 Option
Bracket to mount OmniScan PA extension on HSMT
E128P10-0202-OM U8800432 scanners. P/N: HSMT-A-BRKEX [U8779090]
Combining extension cables with adaptors offers numerous connection possibilities.

ORDERING INFORMATION FOR PA EXTENSION CABLES

E128P10-0202-OM
Number of elements Instrument connector
Cable type Probe connector
Cable length

Number of elements in extension Connector on the probe side

128 = 128 elements 0000 = OmniScan connector and 0 LEMO
Cable type 0004 = OmniScan connector and 4 LEMO at pins 125–128
P = Flexible PVC cable 0202 = OmniScan connector and 4 LEMO at pins 63–64 and 127–128
M = Metal armor outer cover HY = Hypertronics connector
Cable length Connector on the instrument side
0 = 0.5 m OM = OmniScan Connector
5 = 5 m HY = Hypertronics connector
10 = 10 m

25
 Interbox

The Interbox is an ergonomic solution for a common

problem associated with scanner accessories and
connection buildup. This compact hub can connect 2
phased array probes, 2 amplified TOFD channels, as
well as 8 conventional UT channels to be driven by a
phased array acquisition unit. The Interbox can integrate
a PA splitter, a TRPP 5810 TOFD pulser/receiver and up
to 8 extra conventional UT connections, depending of
the configuration.

ORDERING INFORMATION

EIB-T-8-M-5-OM
Extension type Instrument connector
TRPP 5810 Cable length
UT connector Cable type

Extension type Cable type

IB = Interbox P = Flexible PVC cable
TRPP 5810™ M = Metal armor outer cover
T = TRPP 5810 included Cable length
NT = TRPP 5810 not included 5 = 5 m
UT connector 10 = 10 m
Number of conventional UT connections (LEMO 00) 20 = 20 m
0= 0 connector Instrument connector
4= 4 connectors OM = OmniScan® connector
8 = 8 connectors HY = Hypertronics connector

26 www.olympus-ims.com
Yokes
Yokes are used to attach the wedges to the spring-loaded arms (SLA) used on most scanners. Depending of the wedge model used, the
yoke model changes. The yokes below are compatible with HSMT scanners, WeldROVER™, WING™ Scanner, and GLIDER™.

ORDERING INFORMATION
Button
A B
Part Number Item Number Wedge compliance OD
(mm) (mm)
(mm)
Standard Yokes B

ADIX6891 U8775048 ST1, ST2, SPE1, SPE2 and SPE3 5 31.75 23.5 A
Button
ADIX6552 U8775047 SA1, SA2, SA10, SA11, SA12, SPWZ3 8 40 55
Other Yokes
ADIX612 U8775046 SA10 and SA11 8 40 38
ADIX1354 U8775187 SPWZ1 and SA14 (in reverse position) 8 40 46
ADIX1082 U8780194 SPWZ1 and SA14 8 40 65
ADIX853 U8775055 SA1-L (lateral) 8 45 60
ADIX846 U8779096 SA3 8 50 55
ADIX893 U8775084 SA4 and SA5 8 55 55
ADIX908 U8779097 Water wedge 8 50 65
ADIX870 U8775056 Creeping wave probe holder (ADIX1129) 5 40 23
ADIX1325 U8775132 SNW1 8 31.75 55
ADIX1482 U8775165 SNW2 8 31.75 23.5
ADIX1481 U8775164 SNW3 8 31.75 65
1 Standard yoke for TOFD–P/E probe mounting
2 Standard yoke for phased array probe mounting

Aqualene Elastomer Couplant

Aqualene™ is an elastomer designed specifically for ultrasonic inspection applica-
tions. Acoustic impedance of the material is nearly the same as water and its at-
tenuation coefficient is lower than many documented elastomers and plastics.
Applications for nondestructive testing include:
• Flexible couplant pads with minimal water addition
• Low-velocity delay lines
• Water-box membrane
Aqualene elastomer couplant reduces the drawbacks of wet coupling when used
on porous or refractory surfaces. It allows a minimal amount of couplant to be used
while protecting the probe when in direct contact with the part. Furthermore, Aqua-
lene can serve as a thermic insulator. Aqualene couplant products are available in
many sizes and thicknesses, and custom designs are also available.

ORDERING INFORMATION
Size (L x W x H)
Part Number Item Number Description
mm (in.)
29HD0002 U8770300 Plate 146 × 146 × 2 (5.75 × 5.75 × 0.08)
29HD0004 U8770301 Plate 152 × 152 × 6.4 (6 × 6 × 0.25)
29HD0005 U8770302 Plate 102 × 102 × 25.4 (4 × 4 × 1)
29HD0009 U8770299 Plate 102 × 203 × 2.3 (4 × 8 × 0.09)
29HD0010 U8770303 Plate 200 × 100 × 0.5 (7.9 × 3.9 × 0.02)
29HD0011 U8770304 Plate 127 × 127 × 25.4 (5 × 5 × 1)

One of the many uses of Aqualene: phased array probe cluster used in an Olympus industrial pipe

inspection system.

27
How to Order
For pricing or for further information, contact your local sales representative.
To quickly locate your local sales representative, go to www.olympus-ims.com.

Training
Olympus has developed its unique Training Academy, which is a partnership with major training companies in an effort to offer compre-
hensive courses in phased array technology and applications. Courses range from a two-day “Introduction to Phased Array” program to an
in-depth, two-week “Level II Phased Array” course. In both cases, students experience practical training utilizing the portable OmniScan®
phased array unit. Courses lead either to recognized certification or to certificates of attendance.
Courses are currently being offered at the training facilities of participating companies as well as at customer-determined locations world-
wide. Customized courses can also be arranged. Check the latest course schedule in the "Support" section at www.olympus-ims.com.

www.olympus-ims.com
[email protected] is ISO 9001 and 14001 certified.

Shinjuku Monilith, 3-1Nishi-Shinjuku2-chome, Shinjuku-ku, Tokyo 163-0914,

Japan, Tel: 81(0)3-6901-4039

48 Woerd Avenue, Waltham, MA 02453, USA, Tel.: (1) 781-419-3900

Stock Road, Southend-on-Sea, Essex, SS2 5QH, UK, Tel.: (44) (0) 1702 616333

505, boul. du Parc-Technologique, Québec (Québec) G1P 4S9, Tel.: (1) 418-872-1155

31 Gilby Road, Mount Waverly, Victoria, 3149, Tel.: (61) 130-013-2992

Valley Point Office Tower, 248373, Tel: (65) 68-34-00-10

Industrial_Scanners_catalog_EN_201012 • Printed in Canada • Copyright © 2010 by Olympus NDT.
*All specifications are subject to change without notice. All brands are trademarks or registered trademarks of their respective owners and third party entities.