No Signal Visual Appearance
Check if the front panel of STB box LED is blinking with
Orange Color.
If LED is blinking-
Check if COAXIAL CABLE is securely place.
Check the cable modem connection and the 2nd TV connection.
(High Pass Filter must be connected on Splitter going to RF
IN of STB).
Make sure it is connected to RF IN port.
Check Coaxial Cable if it is bend or damage. (Need for
Servicing if Coax is damage.)
Check Manual Search to test signal input.
If LED does not blinking and does not resolve the issue LED Orange
above.. Blinking.
The Tuner of STB is defective and need for replacement.
RF IN
E15 No Access Means: Suspended Visual Appearance
Subscriber must settle monthly subscription to activate the
Account.
If Customer Account is updated and the STB have
message like this.
Your account is now active.
If the Suggestion does not resolve the issue then..
Instruct the customer to check if COAXIAL CABLE
is securely place.
Check Coaxial Cable if it is bend or damage. (Need
for Servicing if Coax is damage.)
Unplug Power Suppy Connector to Power Supply
Port for 10 Seconds then Replug it.
12V Power
If the problem does not resolve the issue above.. Supply Port
Visual Appearance
RCU Manual Search:
1. On Remote Control Press Menu.
2. Go to Search Icon - Manual Search
then press OK.
.
Missing Channels. Visual Appearance
Check for subscription package and missing
channel issue.(what is missing channel program?)
Check Channel line up (list is in our website)
If there is missing channel, click Autosearch the STB.
Auto Search STB
If the Suggestion does not resolve the issue then..
Visual Appearance
RCU AutoSearch
1. On Remote Control Press Menu.
2. Go to Search Icon – Autosearch
then press OK.
3. Wait until scanning is complete.
4.Press OK after scan Finished.
Channel not match to channel line up. Visual Appearance
RCU
1. On Remote Control Press Menu.
2. Go to TV Icon – Channel Edit then
press OK.
3.On Remote control Press Green
button. Sort By will appear on screen
and choose LCN Mode.
4.Press Exit on Remote Control.
J.O. Remarks:
Logo Display Only (Corrupted Firmware) Visual Appearance
Unplug Power Suppy Connector to Power Supply
Port for 10 Seconds then Replug it.
12V Power
Supply Port
No Programs Visual Appearance
1. Ask the Subcriber to check
Manual Search to test signal input.
2. After Manual Search, Proceed to
AutoSearch.
No Video Appears. Visual Appearance
Check power supply connection.
Check LED light in front panel of
STB.
Ask the customer of which video source is used HDMI
or AV cable?
Then check if it is properly connected between TV and
STB.
Check their Video Source use on
TV where HDMI or A/V cable port is connected.
Use Both HDMI and A/V cable and select video source
on TV to check which is working. Check LED
light in front
panel of STB.
Check
power
Check both supply
Video Ports. connection.
No Power on STB Visual Appearance
Check power supply connection.
Check LED light in front panel of STB.
If STB does not have any sign of power up. STB needs
Check LED
to check include Power Supply.
light in front
panel of STB.
Check power
supply
connection.
