Applications of First-Order Differential Equations
Applications of First-Order Differential Equations
Differential Equation
For Engineers
Applications of First-Order
Differential Equations
Prepared by:
Engr. Marc Lin F. Abonales
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
Where: c is the initial value and can be found from the initial condition and k is the constant of proportionality,
which is can be found from an additional condition which might be given in the problem. The above solution is
called the law of exponential growth and decay. Note: If k > 0 the exponential growth occurs, and if k < 0 the
exponential decay occurs. We are assuming that N(t) is a differentiable, hence continuous, function of time. For
population problems, where N(t) is actually discrete and integer-valued, this assumption is incorrect. Nonetheless,
the above equation still provides a good approximation to the physical laws governing such a system.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A person places $20,000 in a savings account
which pays 5 percent interest per annum,
(a)$23,236.68
compounded continuously. Find (b)13.86 years
(a) the amount in the account after three years,
and
(b) the time required for the account to double
in value, presuming no withdrawals and no
additional deposits.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A person places $5000 in an account that
accrues interest compounded continuously.
$9271.44
Assuming no additional deposits or
withdrawals, how much will be in the account
after seven years if the interest rate is a
constant 8.5 percent for the first four years and
a constant 9.25 percent for the last three years?
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A bacteria culture is known to grow at a rate
proportional to the amount present. After one
(a)
hour, 1000 strands of the bacteria are observed (b) 694
in the culture; and after four hours, 3000
strands. Find
(a) an expression for the approximate number
of strands of the bacteria present in the
culture at any time t and
(b) the approximate number of strands of the
bacteria originally in the culture.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
The population of a certain country is known to
increase at a rate proportional to the number of
7062
people presently living in the country. If after
two years the population has doubled, and
after three years the population is 20,000,
estimate the number of people initially living
in the country.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A certain radioactive material is known to
decay at a rate proportional to the amount
(a)
present. If initially there is 50 milligrams of the (b) 40.5 mg
material present and after two hours it is (c) 13 hours
observed that the material has lost 10 percent
of its original mass, find
(a) an expression for the mass of the material
remaining at any time t,
(b) the mass of the material after four hours,
and
(c) the time at which the material has decayed
to one half of its initial mass.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
T(t) = Tm + cekt
The constant of integration c can be calculated by using the initial condition and the
constant of proportionality k can be calculated by using an additional condition.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A body at a temperature of 50°F is placed
outdoors where the temperature is 100°F. If
(a) t = 15.4 mins
after 5 minutes the temperature of the body is (b) T = 79.5°F
60°F, find
(a) how long it will take the body to reach a
temperature of 75°F and
(b) the temperature of the body after 20
minutes.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A body at an unknown temperature is placed in
a room which is held at a constant temperature
-30°F
of 30°F. If after 10 minutes the temperature of
the body is 0°F and after 20 minutes the
temperature of the body is 15°F, find the
unknown initial temperature.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A tank initially holds 100 gal of a brine solution
containing 1 Ib of salt. At t = 0 another brine
(a)
solution containing 1 Ib of salt per gallon is (b) 0.338 min
poured into the tank at the rate of 3 gal/min,
while the well-stirred mixture leaves the tank at
the same rate. Find
(a) the amount of salt in the tank at any time t
and
(b) the time at which the mixture in the tank
contains 2 Ib of salt.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A tank contains 8L (liters) of water in which is
dissolved 32 g (grams) of chemical. A solution
(a) 296/3 g
containing 2 g/L of the chemical flows into the (b) 37/17 g/L
tank at a rate of 4 L/min, and the well-stirred
mixture flows out at a rate of 2 L/min.
(a) Determine the amount of chemical in the
tank after 20 minutes.
(b) What is the concentration of chemical in
the tank at that time?
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A tank initially holds 100 gal of a brine solution
containing 20 Ib of salt. At t = 0, fresh water is
poured into the tank at the rate of 5 gal/min,
while the well stirred mixture leaves the tank at
the same rate. Find the amount of salt in the
tank at any time t.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
Electrical Circuits
RL Circuit. For a series circuit containing only a resistor (R) and an inductor (L), Kirchhoff’s second law (voltage law) states that the sum of
the voltage drop across the resistor (RI) and the voltage drop across the inductor (L(dI/dt)) is the same as the impressed voltage or an
electromotive force (E) on the circuit.
Thus, RI + L(dI/dt)= E
or
Where:
dI/dt = time rate of change of the current in amperes per second
I = amount of current in amperes
R = resistance in ohms
L = inductor in henries
E = electromotive force (emf) in volts
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
Electrical Circuits
RC Circuit. For a series circuit containing only a resistor (R) and capacitor (C), Kirchhoff’s second law (voltage law) states that the sum of
the voltage drop across the resistor (RI) and the voltage drop across a capacitor (q/C) is the same as the impressed voltage or an
electromotive force (E) on the circuit.
Thus, RI + q/C = E
Where:
dq/dt = time rate of change of the electrical charge in coulombs per second
q = amount of electrical charge in coulombs
R = resistance in ohms
C = capacitance in farads
E = electromotive force (emf) in volts
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
An RL circuit has an emf of 5 volts, a resistance
of 50 ohms, an inductance of 1 henry, and no
initial current. Find the current in the circuit at
any time t.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
An RL circuit has an emf given (in volts) by
3sin2t, a resistance of 10 ohms, an inductance
of 0.5 henry, and an initial current of 6 amperes.
Find the current in the circuit at any time t.
DIFFERENTIAL EQUATIONS
APPLICATIONS OF FIRST-ORDER DIFFERENTIAL EQUATIONS
EXAMPLE. ANSWERS:
A 100-volt electromotive force is applied to an
RC series circuit in which the resistance is 200 (a)
ohms and the capacitance is 10-4 farad. Find
(a) the charge q(t) on the capacitor if q(0) = 0
(b) the current i(t)
(b)