Scribd
Upload
869 views2 pages

Lutron SL-4001 Sound Meter PDF

The Lutron SL-4001 is a digital sound level meter with an LCD display that measures sound pressure levels using A-weighting and C-weighting frequency networks according to IEC standards. It has max hold, AC/DC output, fast and slow time weighting modes, and can measure sound levels from 30 to 130 dB. It is lightweight, portable, and powered by a 9V battery with low battery indication.

Uploaded by

Safiq Uddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
869 views2 pages

Lutron SL-4001 Sound Meter PDF

The Lutron SL-4001 is a digital sound level meter with an LCD display that measures sound pressure levels using A-weighting and C-weighting frequency networks according to IEC standards. It has max hold, AC/DC output, fast and slow time weighting modes, and can measure sound levels from 30 to 130 dB. It is lightweight, portable, and powered by a 9V battery with low battery indication.

Uploaded by

Safiq Uddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Lutron SL-4001

DIGITAL SOUND LEVEL METER

• Large LCD display, easy to read


• Frequency weighting networks are designed to meet the IEC 651 type 2
• A & C weighting networks are comformity to standards
• Time weighting (FAST & SLOW) dynamic characteristic modes
• AC/DC output for system expansion
• Built-in adj. VR is available for easy calibration
• Condenser microphone for high accuracy & long-term stability
• Max. Hold function for stored the maximum value on dispaly
• Warning indicator for over and under load
• LCD display for low power consumption & clear read-out even in bright
ambient light condition
• Used the durable, long-lasting components, including a strong, light weight
ABS-plastic housing case
• Small and ligh weight design allow one hand operation
• Low battery indicator
• Standard accessories: instruction manual, calibration screw driver
Specifications Digital sound level meter
Display: 18 mm LCD, 3 1/2 digits
dB (A & C frequency weighting)
Function: Time weighting (Fast=200ms / Slow=500ms)
Max. hold, AC output, DC output
Measurement range: 3 ranges: 35 to 130 dB (typical 30 to 130 dB), input signal only
Resolution: 0.1 dB
Frequency weighting meet IEC 651 type 2, calibrating input signal on 94 dB (31.5 Hz to 8 kHz), then
the accuracy of A weighting is specified as following:
Accuracy (23 ± 5°C): 31.5Hz 63Hz 125Hz 250Hz 500 Hz 1kHz 1kHz 2kHz 4kHz 8kHz
±3dB ±2dB ±1.5dB ±1.5dB ±1.5dB ±1.5dB ±1.5dB ±2dB ±3dB ±5dB

A weighting: The characteristic is simulated as "Human Ear Listing" response. Typical, if making the
Frequency weighting environmental sound level measurement, always select to A weighting.
network: C weighting: The characteristic is near the "Flat" response. Typical, it is suitable for checking the noise
of machinery (Q.C. check) & knowing the sound pressure level of the tested equipment.
Frequency: 31.5 Hz to 8,000 Hz
Calibrator: B & K (Bruel & k multi-function acoustic calibrator, model: 4226)
Microphone: electric condenser microphone
Size of microphone: 1/2 inch standard size
30 to 80 dB
50 to 100 dB
Range selector:
80 to 130 dB
50 dB on each step, with over & under range indicating
Time weighting: Fast: t=200 ms ("Fast" range is simulated the human ear response time weighting)
(Fast & Slow) Slow: t=500 ms ("Slow" range is easy to get the average values of vibration sound level)
Out terminal: 3.5 phone output terminal is provided for connection with analyzer, level recorder, tape recorder
AC output - AC 0.5 Vrms corresponding to each range step
Output signal: DC output - DC 0.3 to 1.3VDC; 10 mV per dB
Output impedance: 600 Ohm
Built-in external calibration VR, easy to calibrate by external screw driver
Calibration:
Internal oscillation system, 1 kHz sine wave generator
Operating temp.: 0°C to 50°C (32°F to 122°F)

Operating humidity: max. 90% RH (0 to 35°C)

Power supply: 006P DC 9V battery (heavy duty type)


Power consumption: approx. DC 6 mA
Dimension: 205 x 80 x 35 mm (8.1 x 3.2 x 1.4 inch)
Weight: 250 gr. including battery

You might also like