Luminaires

indoor
Battens TMS012 MARK II

TMS012 MARK II
High quality basic batten in single and twin-lamp
versions for TL-D and standard TL fluorescent lamps.
Its quality complies with I.E.C. 598 and fire safety
regulations (VDE710).
The batten consists of an U-shaped ceiling rail in
which the electrical equipment is mounted. A cover-
plate is secured to the rail by means of two captive
screws.The specially designed lamp holders are of
the rotor-lock type, which prevents the lamp from
falling out and guarantees proper electrical
connection, since they cover for tolerances in lamp
lengths.The lamp holders are slid on to the end of
the ceiling rail.Twin lamp holders are fitted with an
integrated starter holder.

TMS012 1xTL-D Applications

• Industrial areas
• Commercial areas
• Residential areas

Technical description
• Gear/power supply: conventional I or IC, 230V or
240V/50Hz, 127V or 220V/60Hz
• Lamps: 1x or 2xTL-D fluorescent (18W, 36W,
58W). Also suited for standard TL lamps (26mm)
• Material: rail and cover plate 0.5mm sheet-steel,
white stove enamelled after phosphating
• Longitudinal sides of the ceiling rail reinforced by
moulding
• Prepared for trough-wiring

Dimensions in mm

A
D

Product ID A B C D
TMS 012 1 x 18W 614 50 78.5 515
C

TMS 012 1 x 36W 1224 50 78.5 820

B B TMS 012 1 x 58W 1524 50 78.5 515
TMS 012 2 x 18W 614 103 85.5 515
TMS 012 2 x 36W 1224 103 85.5 820
TMS 012 2 x 58W 1524 103 85.5 820
A. For surface mounting diam. hole 10 mm
C. For suspension mounting diam. hole 16.5 mm

9.92 LUMINAIRES INDOOR

Battens TMS012 MARK II

Installation
• Mounting directly on the surface or suspended
with tubes (max. diameter 16mm)
• Mounting bosses around the keyhole slots and
under the ballast allow for extra safety distance
from batten and ballast to the mounting surface.
• Terminal block, mounted on the ceiling rail,
accepts 2.5mm square wire.
• Easy through-wiring

Accessories
• Industrial reflectors, symmetrical or asymmetrical TMS 012 2x36W
• Prismatic diffusers

Preferred selection
Product ID For Lamps Order code
For 230V/50Hz
TMS012/118 I MARK II 230/50 IND. 1xTL-D18W 9199 182 11833
TMS012/118 IC MARK II 230/50 COMP. 1xTL-D18W 9199 182 11853
TMS012/136 I MARK II 230/50 IND. 1xTL-D36W 9199 182 13633
TMS012/136 IC MARK II 230/50 COMP. 1xTL-D36W 9199 182 13653
TMS012/158 I MARK II 230/50 IND. 1xTL-D58W 9199 182 15833
TMS012/158 IC MARK II 230/50 COMP. 1xTL-D58W 9199 182 15853
TMS012/218 I MARK II 230/50 IND. 2xTL-D18W 9199 182 21833
TMS012/236 I MARK II 230/50 IND. 2xTL-D36W 9199 182 23633
TMS012/258 I MARK II 230/50 IND. 2xTL-D58W 9199 182 25833
For 240V/50Hz
TMS012/118 I MARK II 240/50 IND. 1xTL-D18W 9199 182 11834
TMS012/118 IC MARK II 240/50 COMP. 1xTL-D18W 9199 182 11854
TMS012/136 I MARK II 240/50 IND. 1xTL-D36W 9199 182 13634
TMS012/136 IC MARK II 240/50 COMP. 1xTL-D36W 9199 182 13654
TMS012/158 I MARK II 240/50 IND. 1xTL-D58W 9199 182 15834
TMS012/158 IC MARK II 240/50 COMP. 1xTL-D58W 9199 182 15854
TMS012/218 I MARK II 240/50 IND. 2xTL-D18W 9199 182 21834
TMS012/218 IC MARK II 240/50 COMP. 2xTL-D18W 9199 182 21854
TMS012/236 I MARK II 240/50 IND. 2xTL-D36W 9199 182 23634
TMS012/236 IC MARK II 240/50 COMP. 2xTL-D36W 9199 182 23654
TMS012/258 I MARK II 240/50 IND. 2xTL-D58W 9199 182 25834
For 127V/60Hz
TMS012/118 I MARK II 127/60 IND. 1xTL-D18W 9199 182 11827
TMS012/136 I MARK II 127/60 IND. 1xTL-D36W 9199 182 13627
TMS012/236 I MARK II 127/60 IND. 2xTL-D36W 9199 182 23627
For 220V/60Hz
TMS012/118 I MARK II 220/60 IND. 1xTL-D18W 9199 182 11836
TMS012/136 I MARK II 220/60 IND. 1xTL-D36W 9199 182 13636
TMS012/236 I MARK II 220/60 IND. 2xTL-D36W 9199 182 23636

LUMINAIRES INDOOR 9.93

Battens TMS012 MARK II

GMS012 R 1-lamp GMS012 R 2-lamps GMS012 RA

GMS012 P 1-lamp GMS012 P 2-lamps

Accessories Order Code
Symmetrical reflector (high gloss aluminium)
GMS012 118 RC 9199 186 55030
GMS012 136 RC 9199 186 55130
GMS012 218 RC 9199 186 55330
GMS012 236 RC 9199 186 55430
Symmetrical reflector (white painted steel)
GMS012 118 R 9199 186 50030
GMS012 136 R 9199 186 50130
GMS012 158 R 9199 186 50230
GMS012 218 R 9199 186 50330
GMS012 236 R 9199 186 50430
GMS012 258 R 9199 186 50530
Asymmetrical reflector* (white painted steel)
GMS012 118 RA 9199 186 50630
GMS012 136 RA 9199 186 50730
GMS012 158 RA 9199 186 50830
* Available only on single lamp version.
Prismatic diffuser
GMS012 118 P 9199 186 56030
GMS012 136 P 9199 186 56130
GMS012 218 P 9199 186 56330
GMS012 236 P 9199 186 56430

9.94 LUMINAIRES INDOOR

INDOOR LUMINAIRES 9.95
Applications reference guide

To help start the selection process

The table below shows which luminaire families provide technical and aesthetic solutions for certain
applications.There are, of course, many other combinations not shown here, so please do not restrict yourself
to the suggestions.They are produced only as an indication of what is possible, and to help you start the
selection process. An even more extended luminaire portfolio is available on request.

Office Shop Industry

lighting lighting lighting

General and accent lighting for Accent, general, and decorative Functional lighting for production
task areas, meeting rooms, and lighting for a wide variety of areas, warehouses, etc.
corridors. shops.

Recessed TL page Downlights page High-bay page

9.4-9.19 HID-CFL 9.38-9.65 9.78-9.81

Surface page Downlights page Waterproof page

mounted TL 9.20-9.37 halogen 9.66-9.75 TL 9.82-9.91

Battens TL page
Downlights page Projectors page 9.92-9.97
HID-CFL 9.38-9.65 9.76-9.77
Surface page
Downlights page Recessed TL page mounted TL 9.20-9.37
halogen 9.66-9.75 9.4-9.19
Recessed TL page
Surface page 9.4-9.19
mounted TL 10.30-10.39
Security page
lighting 10.56-10.61
Battens TL page
9.92-9.97

Marker lights page

10.30-10.39

9.2 LUMINAIRES INDOOR

Applications reference guide

Public area Home

lighting lighting

Lighting for shopping malls, Decorative and functional lighting

atriums, car parks, and other large for the living room, kitchen, etc.
public areas.

High-bay page Downlights page

9.78-9.81 halogen 9.66-9.75

Recessed TL page Battens TL page

9.4-9.19 9.92-9.97

Surface page Water- page

mounted TL 9.20-9.37 proof TL 9.82-9.91

Downlights page Marker lights page

HID-CFL 9.38-9.65 10.30-10.39

Water- page Security page

proof TL 9.82-9.91 lighting 10.56-10.61

Battens TL page
9.92-9.97

Marker lights page

10.30-10.39

LUMINAIRES INDOOR 9.3

Recessed luminaires Rotaris

Rotaris TBS740
The defining visual characteristic of the Rotaris
product range, which is based on the innovative TL5
Circular 60 W lamp, is its concentric circles.The
semi-high-gloss aluminium centrepiece (available in its
pure form (ALU) or with a white coated finish
(WH)) is surrounded by an opal (O) or clear (P)
lamp cover, the inside of which has a prismatic
structure, again in concentric circles.The outer rim of
the luminaire, which forms one piece with the optic,
interfaces with the ceiling, ensuring the smooth visual
integration of Rotaris in the space.

The issue of glare control is addressed in all viewing

directions by the OLC-technology (Omnidirectional
Luminance Control).The lamp is shielded by a mirror
TBS740 TL5C 60W and a lamp cover is added to create a pleasing,
balanced brightness.The full range complies with
current office lighting norms (EN12464-1,
Lm < 1000 cd/m2 at γ ≥ 65˚).

Within the Rotaris product family, a complete range

of surface-mounted and suspended luminaires is also
available.

Applications
• Office spaces
• Department stores, fashion shops

Technical description
• Gear: HF: 220 V – 240 V
• Lamp: 1x TL5 Circular 60 W fluorescent
• Connection: Wieland GST 18 for mains, BST 14 for
control signal (0V-10V or DALI)
• Materials: semi-high-gloss anodised aluminium
reflector, polycarbonate components, mounted on
Dimensions in mm a steel frame

Installation
• Mounting: individual. For plasterboard ceilings.
• Cut-out diameter 516 mm.
• Thickness of false ceiling 1 - 42 mm.
• Method: clips.

Accessories
• Blue inlay sheet to give the lamp cover an azure
hue.

9.4 LUMINAIRES INDOOR

Recessed luminaires Rotaris

Opal prismatic lamp cover with Integrated adjustable downlight Clear prismatic lamp cover with
enlarged centrepiece (option IPL) (Fugato range) white centrepiece and sensors for
presence detection and daylight
regulation (Omnisense)

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TBS740 1xTL5C60W/840 HFP P IP WH 3,0 0,60 63556900
TBS740 1xTL5C60W/830 HFP O IP WH 3,0 0,60 63490600

Short optics description

O Opal prismatic polycarbonate lamp cover
P Clear prismatic polycarbonate lamp cover

ZBS740 F-BL
Blue inlay sheet.

Accessory European Order

Code (EOC)
ZBS740 F-BL 63314500

LUMINAIRES INDOOR 9.5

5
Recessed luminaires TBS235

TBS235
Miniature luminaire with a build-in height of only
54 mm for TL5 fluorescent lamps with a choice of
3 optics (C6, D6 and M6).Two in-fill panels along the
side of housing surrounding the optics. Lamps and
optics supplied with the luminaire. The luminaires
provide outstanding lighting efficiency and glare
control, fully complient to European office lighting
norms (EN12464-1, Lm <1000cd/m2 at γ ≥65º)

Applications
• Office spaces • Small independent
• Recreational areas food/ non-food shops
• Public buildings, • Department stores,
schools, and hospitals fashion shops

TBS235 4xTL5 C6 Technical description

• Gear/power supply: HF: 220 V - 240 V
• Lamps: 3 and 4 TL5 (16 mm) fluorescent
• Connection: quick-connection: push-in block
outside the luminaire
• Housing: white sheet steel with white painted
solid in-fill plates

Installation
• Mounting: individual.
• For standard 600 mm modular exposed ceiling
grids.
• Method: lay-in without removing lamps and optic.

Optional
• Connection: quick connection Wieland GST 18/3
• Use of dimmable gear
• Lighting Controls: Luxsense or Omnisense
• Emergency lighting: 1- or 3 hours

Dimensions in mm

9.6 LUMINAIRES INDOOR

Recessed luminaires TBS235

TBS235 4xTL5 D6 TBS235 4xTL5 M6 TBS235 3xTL5 C6

TBS235 3xTL5 M6
Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TBS235 4xTL5-14W/840 HFP C6 PI FL 4,5 0,76 13040800
TBS235 4xTL5-14W/840 HFP D6 PI FL 4,5 0,76 13042200
TBS235 4xTL5-14W/840 HFP M6 PI FL 4,5 0,71 13044600
TBS235 3xTL5-14W/840 HFP C6 PI FL 4,5 0,76 13046000
TBS235 3xTL5-14W/840 HFP D6 PI FL 4,5 0,76 13048400
TBS235 3xTL5-14W/840 HFP M6 PI FL 4,5 0,71 13050700

Short optics description

C6 High-gloss aluminium optic with 3-dimensional lamellae
D6 Semi-high-gloss aluminium optic with 3-dimensional lamellae
M6 Matt aluminium optic with 3-dimensional lamellae

LUMINAIRES INDOOR 9.7

Recessed luminaires Impala

Impala TBS160
Functional, economical luminaire for TL-D fluorescent
lamps with a wide range of optics and prismatic
plate.The optic or plate is supplied with the
luminaire. Fixation of the optics/plate to the housing
by innovative clip, to facilitate installation and
maintenance. Mains connection can be made without
opening the luminaire, due to a smart external
connection system. The luminaire fits standard in
visible profile ceilings and it fits also, by using
accessories, in concealed and plaster ceilings.
Choice of different versions available (optional):
• versions 3/4 x 18 W, 2/3/4 x 36 W (TL-D)
• lamps installed and protection foil (ready-to-install
luminaires)
• plug-in connector GST 18/3
TBS160 4x18W C6-60 • emergency lighting 1- or 3-hours

Applications
• Office spaces • Department stores,
• Recreational areas fashion shops
• Discount stores, • Normal industries
hyper-/ supermarkets,
do-it-yourself shops

Technical description
• Gear/power supply:
HF: 220 V - 240 V (HFP, HFR, EI*)
conventional: 230 V or 240 V
• Lamps: 2, 3 and 4 TL-D/TL5 (16 mm) fluorescent
• Connection: push-in connection block
for P-optic • Housing: pre-lacquered white steel
* Electronic Included

Installation
• Mounting: individual
Dimensions in mm • Modules: 600 x 600, 300 x 1 200, 600 x 1 200 mm
• Ceilings: visible ceiling types profile 15 or 24 mm,
with accessories in concealed or plaster ceilings
• Connection to mains can be made by an external
connection
• In each corner of the housing, holes are available
for safety chain or thread rod
• Optic fixation by innovative clip

Accessories
• Suspension brackets
• Plaster clips (for 18W versions only)
TBS160 3x/4x 18W

9.8 LUMINAIRES INDOOR

Recessed luminaires Impala

Product ID A
TBS160 2x36W 296
TBS160 3x36W/4x36W 596

TBS160 4x18W M6 TBS160 4x18W M2 TBS160 4x18W P

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TBS160 4xTL-D18W HFP C6-60 PI 3,7 0,66 29791000
TBS160 4xTL-D18W IC C6-60 PI 4,4 0,66 29842900
TBS160 4xTL-D18W IC M6 PI 4,4 0,62 29850400
TBS160 4xTL-D18W IC M2 PI 3,9 0,66 29849800
TBS160 4xTL-D18W IC 240V M2 SI 3,9 0,66 30918700
TBS160 4xTL-D18W IC L1 PI 4,6 0,67 29633300
TBS160 4xTL-D18W IC P PI 4,7 0,58 29821400
TBS160 2xTL-D36W IC C6-60 PI 4,4 0,64 29665400
TBS160 2xTL-D36W IC M2 PI 4,3 0,61 29667800
IC versions equipped with 230V/50Hz gear unless specified otherwise. Other voltages/frequencies available on request

Short optics description

C6-60 High-gloss aluminium optic with 3-dimensional lamellae
M6 Matt aluminium optic with 3-dimensional lamellae
M2 Matt aluminium optic with concave profiled aluminium lamellae
L1 White prelacquered louvre with concave lamellaes
P Polycarbonate prismatic cover

LUMINAIRES INDOOR 9.9

Recessed luminaires Impala

Module

ZBS160 MB
Suspension bracket set for
recessed mounting in false ceilings
with concealed profile.

ZBS160 PLA
Set of plaster clips for recessed
mounting in plaster ceilings and
only for the 3 and 4 x 18 W
versions.

Accessory Weight European Order

(kg) Code (EOC)
ZBS160 MB (4PCS) 0.17 29960099
ZBS160 PLA (40PCS) 0.12 29966299

9.10 LUMINAIRES INDOOR

Recessed luminaires Impala

LUMINAIRES INDOOR 9.11

Recessed luminaires TBS269

TBS269
Functional modular luminaire for 4xTL-D fluorescent
18W lamps (2xTL-D36W on request) and an
optional 3-hour emergency lighting circuit for 1 lamp.
Housing can be accommodated to different ceiling
systems including “Dampa” & Armstrong ceilings.
Meets LG3 Cat II glare norms (Lm ≤200cd/m2). Ease
in mounting and installation with pleasing aesthetics.

Applications
• Individual offices
• General open offices
• Service areas
• Corridors & Staircases
• Recreational areas
• Department stores, Fashion shops etc.
TBS269 4x18W
Technical description
• Gear/power supply:
HF 220V-240V/50-60Hz
Conventional: I, IC, 230V or 240V/50Hz, 127V or
220V/60Hz
• Housing: 0.6mm sheet steel with epoxy white
powder coating
• Double Parabolic mirror made of bright, pre-
anodized high purity aluminum of 99.9%. Cat II
glace norms achieved.
• Class I
• LOR > 60 %

Installation
• Resting on T-bar
• With mounting brackets for concealed ceilings
• Suspension via hooks or chains.

Accessories
Dimensions in mm • Mounting bracket set ZGN269

Type A B C
max. max. max.
TBS269 4x18W 597 597 110
TBS269 2x36W 1197 297 110

9.12 LUMINAIRES INDOOR

Recessed luminaires TBS269

Preferred selection
Product ID Order Code
TBS269 4XTLD18W HFP C5 SI WH 9129 001 43971
TBS269 4XTLD18W EI C5 SI WH 9129 001 51971
TBS269 4XTLD18W 230V IC C5 SI WH 9129 001 54971
TBS269 4XTLD18W 240V IC C5 SI WH 9129 001 41971
Other voltages/frequencies available on request

Short optics description

C5 High-gloss aluminium optic with V-shape lamellae

Accessory Description Order Code

ZGN269 Mounting bracket set 9129 001 47971

LUMINAIRES INDOOR 9.13

Recessed luminaires TBS120

TBS120
Economical general-purpose recessed TL-D
luminaire. A wide variety of optics, gear, and lamps is
available to have the perfect fit for many applications.
The sturdy and durable luminaire (0.6mm sheet steel
housing) meets Philips’ high standards and ensure
reliable and high quality perfomance for many years.
The installation is straight-forward and doesn’t
require any special tools. Surface mounted types are
also available (TCS120).
TBS120 will enhance the appearance of any ceiling!

Applications
• Office
• Discount shops
• Department store
TBS120 4x18W C5 • Light industries
• Dust protected areas

Technical description
• Lamps: 2x36W or 4x18W TL-D fluorescent
• Gear/power supply:
HFP and EI*, 220-240V/50-60Hz, conventional:
I, IC, 230V or 240V/50Hz, 127V or 220V/60Hz
• Housing: 0.6mm sheet steel with epoxy white
powder coating
• Optics: High-gloss (C5), Matt (M2) or Prismatic
acrylic cover (P)
• Emergency lighting (3 hours) optional for 1 lamp
• IP44 versions with prismatic cover available on
request
with P-cover * EI = Electronic Included

with P-cover on request Installation

• Electrical connection: screw connector
• Lay-in or with mounting brackets for concealed
Dimensions in mm profiles

Accessories
• Mounting bracket set ZGN120

Product ID A B C
TBS120 4x18W 613 595 595
TBS120 2x36W 1223 1195 295

9.14 LUMINAIRES INDOOR

Recessed luminaires TBS120

TBS120 2x36W M2 TBS120 2x36W P TBS120 4x18W P

TBS120 optional with emergency

pack (3 hours)

LUMINAIRES INDOOR 9.15

Recessed luminaires TBS120

Preferred selection
Product ID Order Code
TBS120 4XTLD18W HFP C5 SI WH 9129 011 56971
TBS120 4XTLD18W HFP M2 SI WH 9129 027 92971
TBS120 4XTLD18W HFP P SI WH 9129 011 57971
TBS120 4XTLD18W EI C5 SI WH 9129 011 93971
TBS120 4XTLD18W EI M2 SI WH 9129 006 76971
TBS120 4XTLD18W EI P SI WH 9129 006 79971
TBS120 4XTLD18W 230V IC C5 SI WH 9129 016 36971
TBS120 4XTLD18W 230V IC M2 SI WH 9129 015 91971
TBS120 4XTLD18W 230V IC P SI WH 9129 015 83971
TBS120 4XTLD18W 240V IC C5 SI WH 9129 011 54971
TBS120 4XTLD18W 240V IC M2 SI WH 9129 007 92971
TBS120 4XTLD18W 240V IC P SI WH 9129 007 84971
TBS120 4XTLD18W 230V I M2 SI WH 9129 006 92971
TBS120 2XTLD36W HFP C5 SI WH 9129 006 66971
TBS120 2XTLD36W EI C5 SI WH 9129 013 59971
TBS120 2XTLD36W EI M2 SI WH 9129 006 77971
TBS120 2XTLD36W EI P SI WH 9129 013 47971
TBS120 2XTLD36W 230V IC C5 SI WH 9129 013 89971
TBS120 2XTLD36W 230V IC M2 SI WH 9129 015 93971
TBS120 2XTLD36W 230V IC P SI WH 9129 015 85971
TBS120 2XTLD36W 240V IC C5 SI WH 9129 011 60971
TBS120 2XTLD36W 240V IC M2 SI WH 9129 007 94971
TBS120 2XTLD36W 240V IC P SI WH 9129 007 86971
Other voltages/frequencies available on request

Short optics description

C5 High-gloss aluminium optic with V-shape lamellae
M2 High-gloss aluminium optic with matt profiled aluminium lamellae
P Prismatic cover (acrylic) sealed in white extruded aluminium frame

ZGN120
Suspension bracket set for
recessed mounting in false ceilings
with concealed profile.

Accessory Description Order Code

ZGN120 Mounting bracket set 9129 006 86971

9.16 LUMINAIRES INDOOR

Recessed luminaires TBS120

LUMINAIRES INDOOR 9.17

Recessed luminaires TBS020

TBS020
Attractive low-cost recessed TL-D luminaire.
A limited range of optics, gear, and lamps is available
to have the perfect fit for many applications.The
sturdy and durable luminaire (0.6mm sheet steel
housing) meets Philips’ high standards and ensure
reliable and high quality perfomance for many years.
The installation is straight-forward and doesn’t
require any special tools. Surface mounted types are
also available (TCS020).
The TBS020 range offers an economical and
attractive lighting solution.

Applications
• Office
• Discount shops
TBS020 4x18W M2 • Department store
• Light industries

Technical description
• Lamps: 2x36W or 4x18W TL-D fluorescent
• Gear/power supply:
Conventional: I, 230V or 240V/50Hz, 127V or
220V/60Hz
IC, EI, HFP available on request
• Housing: 0.6mm sheet steel with epoxy white
powder coating
• Optics: Matt (M) or Prismatic polystyrene cover (P)
• Emergency lighting (3 hours) optional for 1 lamp

Installation
• Electrical connection: screw connector
• Lay-in or with mounting brackets for concealed
profiles

Accessories
Dimensions in mm • Mounting bracket set ZGN020

Product ID A B C
TBS020 4x18W 613 595 595
TBS020 2x36W 1223 1195 295

9.18 LUMINAIRES INDOOR

Recessed luminaires TBS020

TBS020 2x36W P TBS020 4x18W P Reliable provision for suspension

springs
Preferred selection
Product ID Order Code
TBS020 4XTLD18W 230V I M SI WH 9129 015 27971
TBS020 4XTLD18W 230V I P SI WH 9129 015 15971
TBS020 4XTLD18W 240V I M SI WH 9129 007 28971
TBS020 4XTLD18W 240V I P SI WH 9129 007 16971
TBS020 4XTLD18W 220V I M SI WH 9129 010 00971
TBS020 4XTLD18W 220V I P SI WH 9129 009 88971
TBS020 4XTLD18W 127V I M SI WH 9129 008 64971
TBS020 4XTLD18W 127V I P SI WH 9129 008 52971
TBS020 2XTLD36W 230V I M SI WH 9129 015 29971
TBS020 2XTLD36W 230V I P SI WH 9129 015 17971
TBS020 2XTLD36W 240V I M SI WH 9129 007 30971
TBS020 2XTLD36W 240V I P SI WH 9129 007 18971
TBS020 2XTLD36W 220V I M SI WH 9129 010 02971
TBS020 2XTLD36W 220V I P SI WH 9129 009 90971
TBS020 2XTLD36W 127V I M SI WH 9129 008 66971
TBS020 2XTLD36W 127V I P SI WH 9129 008 54971
Other voltages/frequencies available on request

Short optics description

M Aluminium optic with matt profiled aluminium lamellae
P Prismatic cover (polystyrene)

Accessory Description Order Code

ZGN020 Mounting bracket set 9129 014 98971

LUMINAIRES INDOOR 9.19

Surface-mounted Strato
luminaires
Strato
Strato is a modular light system. It’s self-supporting
housing is made of extruded aluminium and features
trapezoidal slots for connecting the luminaire
modules to one another. Into the housing is inserted
a translucent PMMA cover with an integrated
patented diffuser to create a homogeneous luminous
surface.The cover can be suspended via a damped
spring locking system to facilitate maintenance.
The luminaire can be suspended or wall mounted.

Technical description Strato Sky:

• Gear/power supply: HF-Regulator 1-10 V or Dali
(on request)
• Weight per module: approx. 30 kg
• Lamps: 4x2xTL5-28W; lightcolours: 827 and 865
TPH710 for colour mixing
• Power consumption: max. approx. 250 W per
module
• LOR: approx. 0,5
• For Lighting controls customised solutions can be
created with Philips standard components.

Technical description Strato Rainbow:

• Gear/power supply: HF-Regulator 1-10 V or Dali
(on request)
• Weight per module: approx. 30 kg
• Lamps: 4x3xTL5-28W; lightcolours: red, green and
blue for colour mixing
• Power consumption: max. approx. 380 W per
module
• LOR: approx. 0,5
• For Lighting controls customised solutions can be
created with Philips standard components.

Dimensions in mm

9.20 LUMINAIRES INDOOR

Surface-mounted Strato
luminaires
Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
TPH710 8xTL5-28W/827/865 HFR 30.0 21354200
TPH710 12xTL5-28W/RGB HFR 30.0 21352800

LUMINAIRES INDOOR 9.21

Surface-mounted Centura
luminaires
Centura TCS098
Basic luminaire for TL-D fluorescent lamp(s) in 2 x
18 W, 1/2 x 36 W, 1/2 x 58 W executions with
choice of 4 optics (L, C3, ML, A). Fixation of the
optics to the housing by innovative clips, to facilitate
installation and maintenance. Dedicated Class II
versions are also available. Optics supplied with the
luminaire.

Applications
• Office spaces
• Recreational areas
• Public buildings, hospitals and schools
• Discount stores, hyper-/ supermarkets,
do-it-yourself shops
• Department stores, fashion shops
TCS098 2x TL-D L • Normal industries

Technical description
• Gear/power supply:
HF: 220 V - 240 V (HFP, EI*)
conventional: 230 V or 240 V (optional)
• Lamps: 1 and 2 TL-D fluorescent
• Housing: white pre-lacquered steel with PC/ABS
end-caps
• Optional: emergency lighting
* Electronic Included

Dimensions in mm

Product ID A B
TCS098 2x18W 450 641
TCS098 1x36W/2x36W 900 1251
TCS098 1x58W/2x58W 1200 1551

9.22 LUMINAIRES INDOOR

Surface-mounted Centura
luminaires

TCS098 1x TL-D36W C3 TCS098 2x TL-D36W C3 TCS098 2x TL-D36W ML

TCS098 1x TL-D36W L TCS098 1x TL-D36W A

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TCS098 1xTL-D36W EI C3 2.4 0.68 30072600
TCS098 1xTL-D36W EI L 2.7 0.69 30073300
TCS098 1xTL-D36W I C3 3.0 0.68 10910700
TCS098 1xTL-D36W I L 3.3 0.69 10909100
TCS098 1xTL-D36W I A 3.2 0.70 10911400
TCS098 1xTL-D36W IC C3 3.0 0.68 10896400
TCS098 1xTL-D36W IC L 3.3 0.69 10895700
TCS098 1xTL-D36W IC A 3.2 0.70 10897100
TCS098 2xTL-D36W EI C3 2.7 0.56 30078800
TCS098 2xTL-D36W EI L 2.6 0.55 30080100
TCS098 2xTL-D36W IC C3 3.8 0.56 10899500
TCS098 2xTL-D36W IC L 4.1 0.55 10898800
TCS098 2xTL-D36W IC ML 4.2 0.49 10900800
I and IC versions equipped with 230V/50Hz gear unless specified otherwise. Other voltages/frequencies available on request

Short optics description

C3 High-gloss aluminium optic with matt lamellae
L White prelacquered optic
ML Mesh-louvre
A Aluminium asymmetrical reflector

LUMINAIRES INDOOR 9.23

Surface-mounted Centura square
luminaires
Centura TCS098 square
Basic luminaire for 4 TL-D fluorescent lamps with
choice of 3 optics (C3, L, ML).
Dedicated optics supplied with the luminaire.

Applications
• Office spaces
• Recreational areas
• Public buildings, hospitals and schools
• Discount stores, hyper-/ supermarkets, do-it-
yourself shops
• Department stores, fashion shops
• Normal industries

Technical description
• Gear/power supply:
TC098 4x18W C3 HF: 220 V - 240 V
conventional: 230 V or 240 V
• Lamps: 4 TL-D fluorescent
• Housing: white lacquered steel

Dimensions in mm

9.24 LUMINAIRES INDOOR

Surface-mounted Centura square
luminaires

TCS098 4x TL-D18W C3 TCS098 4x TL-D18W ML TCS098 4x TL-D18W L

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TCS098 4xTL-D18W HFP C3 4.9 0.68 29264900
TCS098 4xTL-D18W IC C3 5.5 0.68 11068400
TCS098 4xTL-D18W IC L 4.9 0.63 11067700
TCS098 4xTL-D18W IC ML 4.6 0.50 11069100
IC versions equipped with 230V/50Hz gear unless specified otherwise. Other voltages/frequencies available on request

Short optics description

C3 High-gloss aluminium optic with matt lamellae
L White prelacquered optic
ML Mesh-louvre

LUMINAIRES INDOOR 9.25

Surface-mounted TCS097
luminaires
TCS097
Basic luminaire for TL-D fluorescent lamp(s) with
choice of 2 covers (O = opal and P = prismatic).
Covers are supplied with the luminaire.

Applications
• Recreational areas
• Public buildings, hospitals and schools
• Dust protected areas

Technical description
• Gear/power supply:
HF(optional): 220 V - 240 V (HFP, EI*)
conventional: 230 V or 240 V
• Lamps: 1 and 2 TL-D fluorescent
• Housing: base plate in white sheet steel with
TCS097 2x TL-D P plastic end-caps for perfect finishing
• Covers: in PMMA, modern design
* Electronic Included

Installation
• Mounting: individual.
• Method: traditional key holes for (wood) screw
fixing.

Dimensions in mm

Product ID A B
TCS097 1x18W/2x18W 450 650
TCS097 1x36W/2x36W 900 1256
TCS097 1x58W/2x58W 1200 1556

9.26 LUMINAIRES INDOOR

Surface-mounted TCS097
luminaires

TCS097 2x TL-D O TCS097 1x TL-D P TCS097 1x TL-D O

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TCS097 1xTL-D18W I O 1.4 0.72 10644100
TCS097 1xTL-D18W I P 1.4 0.80 10645800
TCS097 1xTL-D18W IC 240V O FU 1.4 0.72 10754700
TCS097 1xTL-D18W IC 240V P FU 1.4 0.80 10755400
TCS097 1xTL-D36W EI O 1.7 0.74 12125300
TCS097 1xTL-D36W EI P 1.7 0.74 12126000
TCS097 1xTL-D36W IC O 2.1 0.74 10631100
TCS097 1xTL-D36W IC P 2.1 0.82 10632800
TCS097 1xTL-D36W IC 240V O FU 2.1 0.74 10675500
TCS097 1xTL-D36W IC 240V P FU 2.1 0.82 10676200
TCS097 1xTL-D36W I O 2.1 0.74 10648900
TCS097 1xTL-D36W I P 2.1 0.82 10649600
TCS097 2xTL-D18W I O 1.9 0.74 10646500
TCS097 2xTL-D18W I P 1.9 0.84 10647200
TCS097 2xTL-D18W IC 240V O FU 1.9 0.74 10673100
TCS097 2xTL-D18W IC 240V P FU 1.9 0.84 10674800
TCS097 2xTL-D36W EI O 3.0 0.64 12127700
TCS097 2xTL-D36W EI P 3.0 0.72 12128400
TCS097 2xTL-D36W IC O 3.3 0.64 10633500
TCS097 2xTL-D36W IC P 3.3 0.72 10634200
TCS097 2xTL-D36W IC 240V O FU 3.3 0.64 10677900
TCS097 2xTL-D36W IC 240V P FU 3.3 0.72 10678600
TCS097 2xTL-D36W I O 3.3 0.64 12368400
TCS097 2xTL-D36W I P 3.3 0.72 12369100
I and IC versions equipped with 230V/50Hz gear unless specified otherwise. Other voltages/frequencies available on request

Short optics description

O Opal cover (acrylic)
P Prismatic cover (acrylic)

LUMINAIRES INDOOR 9.27

Surface-mounted Modella
luminaires
Modella TCS125
Luminaire for TL-D linear fluorescent lamps with
aesthetic, unique design which perfectly harmonizes
with interiors. Choice of smooth, easy to clean, opal
or prisma covers. Covers suspendable on the
endcaps allow easy lamp replacement without tools.

Applications
• Normal industries • Discount stores, Hyper-
• Corridors, staircases /Supermarkets, Do-it-
• Office spaces yourself shops
• Recreational areas
(restaurants, cafeterias)

Technical description
• Gear/power supply:
TCS125 P • Conventional: 230 V (I of IC gear)
• Electronic: 230-240 V (EI, Electronics included)
• Lamps: 2 TL-D linear fluorescent
Housing: white, powder painted steel with plastic
end-caps, and opal or prismatic cover internally
ribbed.

Installation
Luminaire easy to install and maintenance friendly.
Surface mounted, can be suspended.

Dimensions in mm

Product ID A L
TCS125 2x18W 320 680
TCS125 2x36W 930 1292
TCS125 2x58W 1230 1592

9.28 LUMINAIRES INDOOR

Surface-mounted Modella
luminaires

TCS125 O
Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
TCS125 2xTL-D18W I P 1.6 0.61 12337000
TCS125 2xTL-D18W I O 1.6 0.52 12338700
TCS125 2xTL-D36W I P 3.1 0.63 12339400
TCS125 2xTL-D36W I O 3.1 0.54 12340000
TCS125 2xTL-D58W I P 4.3 0.62 12341700
TCS125 2xTL-D58W I O 4.3 0.53 12342400
TCS125 2xTL-D18W IC P 1.7 0.61 12327100
TCS125 2xTL-D18W IC O 1.7 0.52 12328800
TCS125 2xTL-D36W IC P 3.1 0.63 12329500
TCS125 2xTL-D36W IC O 3.1 0.54 12330100
TCS125 2xTL-D58W IC P 4.3 0.62 12331800
TCS125 2xTL-D58W IC O 4.3 0.53 12332500
TCS125 2xTL-D36W EI P 2.2 0.63 12333200
TCS125 2xTL-D36W EI O 2.2 0.54 12334900
TCS125 2xTL-D58W EI P 2.6 0.62 12335600
TCS125 2xTL-D58W EI O 2.6 0.53 12336300
I and IC versions equipped with 230V/50Hz gear. EI versions 230-240V/50-60HZ

Short optics description

O Opal cover (acrylic)
P Prismatic cover (acrylic)

LUMINAIRES INDOOR 9.29

Surface-mounted TCS120
luminaires
TCS120
Economical general-purpose surface-mounted TL-D
luminaire. A wide variety of optics, gear, and lamps is
available to have the perfect fit for many applications.
The sturdy and durable luminaire (0.6mm sheet steel
housing) meets Philips’ high standards and ensure
reliable and high quality perfomance for many years.
The installation is straight-forward and doesn’t
require any special tools. Recessed types are also
available (TBS120).
TCS120 will enhance the appearance of any ceiling!

Applications
• Offices
• Discount shops
TSC120 4x18W C5 • Department stores
• Light industries
• Dust protected areas

Technical description
• Lamps: 2x36W, 4x18W or 4x36W TL-D
fluorescent
• Gear/power supply: HFP and EI*, 220-240V/
50-60Hz, conventional: I, IC, 230V or 240V/50Hz,
127V or 220V/60Hz
• Housing: 0.6mm sheet steel with epoxy white
powder coating
with P-cover • Optics: High-gloss (C5), Matt (M2) or Prismatic
acrylic cover (P)
with P-cover on request • Emergency lighting (3 hours) optional for 1 lamp
• IP44 versions with prismatic cover available on
request
* EI = Electronic Included

Dimensions in mm
Installation
• Electrical connection: screw connector
• Fixation with screws in pre-positioned holes

Product ID A B
TCS120 4x18W 612 595
TCS120 2x36W 1222 300
TCS120 4x36W 1222 595

9.30 LUMINAIRES INDOOR

Surface-mounted TCS120
luminaires

Optic M2; efficient lamellae for Prismatic cover (P) for functional TCS120 available
wide beam wide spread of light with emergency-pack

Preferred selection
Product ID Order Code
TCS120 4XTLD18W HFP C5 SI WH 9129 016 78971
TCS120 4XTLD18W EI C5 SI WH 9129 016 77971
TCS120 4XTLD18W EI M2 SI WH 9129 028 37971
TCS120 4XTLD18W EI P SI WH 9129 003 36971
TCS120 4XTLD18W 230V IC C5 SI WH 9129 016 38971
TCS120 4XTLD18W 230V IC M2 SI WH 9129 016 23971
TCS120 4XTLD18W 230V IC P SI WH 9129 016 15971
TCS120 4XTLD18W 240V IC C5 SI WH 9129 011 65971
TCS120 4XTLD18W 240V IC M2 SI WH 9129 008 24971
TCS120 4XTLD18W 240V IC P SI WH 9129 008 16971
TCS120 4XTLD18W 230V I M2 SI WH 9129 004 65971
TCS120 2XTLD36W HFP C5 SI WH 9129 011 75971
TCS120 2XTLD36W HFP P SI WH 9129 011 74971
TCS120 2XTLD36W EI P SI WH IP 9129 016 82971
TCS120 2XTLD36W EI P SI WH IP40 9129 004 69971
TCS120 2XTLD36W 230V IC C5 SI WH 9129 016 48971
TCS120 2XTLD36W 230V IC M2 SI WH 9129 016 25971
TCS120 2XTLD36W 230V IC P SI WH 9129 016 17971
TCS120 2XTLD36W 240V IC C5 SI WH 9129 011 76971
TCS120 2XTLD36W 240V IC M2 SI WH 9129 008 26971
TCS120 2XTLD36W 240V IC P SI WH 9129 008 18971
TCS120 2XTLD36W 230V I M SI WH 9129 011 70971
TCS120 2XTLD36W 230V I M2 SI WH 9129 004 63971
TCS120 4XTLD36W 230V IC C5 SI WH 9129 028 35971
TCS120 4XTLD36W 230V IC M2 SI WH 9129 016 27971
TCS120 4XTLD36W 230V IC P SI WH 9129 016 19971
TCS120 4XTLD36W 240V IC M2 SI WH 9129 008 28971
TCS120 4XTLD36W 240V IC P SI WH 9129 008 20971
TCS120 4XTLD36W 230V I M2 SI WH 9129 004 66971
Other voltages/frequencies available on request

Short optics description

C5 High-gloss aluminium optic with V-shape lamellae
M2 High-gloss aluminium optic with matt profiled aluminium lamellae
P Prismatic cover (acrylic) sealed in white extruded aluminium frame

LUMINAIRES INDOOR 9.31

Surface-mounted TCS020
luminaires
TCS020
Attractive low-cost surface-mounted TL-D luminaire.
A limited range of optics, gear, and lamps is available
to have the perfect fit for many applications.
The sturdy and durable luminaire (0.6mm sheet steel
housing) meets Philips’ high standards and ensure
reliable and high quality perfomance for many years.
The installation is straight-forward and doesn’t
require any special tools. Recessed types are also
available (TBS020).
The TCS020 range offers an economical and
attractive lighting solution.

Applications
• Offices
• Discount shops
TCS020 4x18W M • Department stores
• Light industries

Technical description
• Lamps: 2x36W or 4x18W TL-D fluorescent
• Gear/power supply:
Conventional: I, 230V or 240V/50Hz, 127V or
220V/60Hz. IC, EI, HFP available on request
• Housing: 0.6mm sheet steel with epoxy white
powder coating
• Optics: Matt (M) or Prismatic polystyrene cover (P)
• Emergency lighting (3 hours) optional for 1 lamp

Installation
• Electrical connection: screw connector
• Fixation with screws in pre-positioned holes

Dimensions in mm

Product ID A B
TCS020 4x18W 612 595
TCS020 2x36W 1222 300

9.32 LUMINAIRES INDOOR

Surface-mounted TCS020
luminaires

Matt aluminium optic (M) Prismatic cover (P) TCS020 includes reknown Philips
ballasts

Preferred selection
Product ID Order Code
TCS020 4XTLD18W 230V I M SI WH 9129 015 59971
TCS020 4XTLD18W 230V I P SI WH 9129 015 51971
TCS020 4XTLD18W 240V I M SI WH 9129 007 60971
TCS020 4XTLD18W 240V I P SI WH 9129 007 52971
TCS020 4XTLD18W 220V I M SI WH 9129 010 32971
TCS020 4XTLD18W 220V I P SI WH 9129 010 24971
TCS020 4XTLD18W 127V I M SI WH 9129 008 96971
TCS020 4XTLD18W 127V I P SI WH 9129 008 88971
TCS020 2XTLD36W 230V I M SI WH 9129 015 61971
TCS020 2XTLD36W 230V I P SI WH 9129 015 53971
TCS020 2XTLD36W 240V I M SI WH 9129 007 62971
TCS020 2XTLD36W 240V I P SI WH 9129 007 54971
TCS020 2XTLD36W 220V I M SI WH 9129 010 34971
TCS020 2XTLD36W 220V I P SI WH 9129 010 26971
TCS020 2XTLD36W 127V I M SI WH 9129 008 98971
TCS020 2XTLD36W 127V I P SI WH 9129 008 90971
Other voltages/frequencies available on request

Short optics description

M Aluminium optic with matt profiled aluminium lamellae
P Prismatic cover (polystyrene)

LUMINAIRES INDOOR 9.33

Surface-mounted Gondola
luminaires
Gondola
Wall/ceiling mounted luminaires for incandescent
and/or compact fluorescent lamps (PL-C and PL-S),
ranging from waterproof/vandal resistant versions to
purely decorative.

Applications
• Public buildings, hospitals and schools.

Technical description
• Power supply: 230 V
• Material: base in thermoplastic reinforced with
fiber glass, diffuser in opal polycarbonate,
aluminium reflector.
• Colours: base in white, black or metal grey
• Lamp socket:
FWG200/QWG200 ALU E27: QWG-types
G24d-2, G24d-3, G23 or G24q2: FWG-types

Installation
• Method: with 2 - 4 steel screws.
• Maintenance: lamp access after removing the
polycarbonate cover.

20 J
for QWG/
FWG200/210 for FWG220/230/240

FWG200/QWG200 WH
Dimensions in mm

FWG200/QWG200 BK

9.34 LUMINAIRES INDOOR

Surface-mounted Gondola
luminaires
Dimensions in mm

FWG210 FWG210 WH FWG210 BK

FWG220 FWG220 WH FWG220 BK

FWG230 FWG230 WH FWG230 BK

FWG240 FWG240 WH FWG240 BK

LUMINAIRES INDOOR 9.35
Surface-mounted Gondola
luminaires
Preferred selection
Product ID Colour Weight European Order
ALU = Aluminium, BK = Black,WH = White (kg) Code (EOC)
FWG200 1xPL-C/4P18W I EL1 ALU ALU 1.50 65668700
FWG200 1xPL-C/4P18W I EL1 BK BK 1.50 65667000
FWG200 1xPL-C/4P18W I EL1 WH WH 1.50 65666300
FWG200 2xPL-C/2P18W I ALU ALU 2.50 65665600
FWG200 2xPL-C/2P18W I BK BK 2.50 65664900
FWG200 2xPL-C/2P18W I WH WH 2.30 65663200
FWG210 1xPL-C/2P18W I BK BK 1.00 65670000
FWG210 1xPL-C/2P18W I WH WH 1.00 65669400
FWG210 1xPL-C/2P26W I BK BK 1.20 65672400
FWG210 1xPL-C/2P26W I WH WK 1.20 65671700
FWG220 1xPL-C/2P18W I BK BK 1.10 65674800
FWG220 1xPL-C/2P18W I WH WH 1.10 65673100
FWG230 2xPL-S/2P9W I BK BK 0.80 65678600
FWG230 2xPL-S/2P9W I WH WH 0.80 65677900
FWG240 2xPL-S/2P9W I BK BK 0.90 65680900
FWG240 2xPL-S/2P9W I WH WH 0.90 65679300
QWG200 A60-100W CLII ALU ALU 1.40 65662500
QWG200 A60-100W CLII BK BK 1.50 65661800
QWG200 A60-100W CLII WH WH 1.50 65660100
QWG210 A60-75W CLII BK BK 0.70 82439000
QWG210 A60-75W CLII WH WH 0.70 82438300

9.36 LUMINAIRES INDOOR

Surface-mounted Gondola
luminaires

LUMINAIRES INDOOR 9.37

Downlights Fugato Compact
Accent lighting
Fugato Compact – MBS260 / 262 / 264
Family of miniaturised recessed downlights for
compact HID lamps (halogen versions available on
request). Fixed (MBS260), cardanic (MBS264) and
fully adjustable (MBS262) versions are available to
provide accent lighting in retail applications. Cutout
diameter is 175 mm. Optical variation is offered by
means of Fugato’s ‘dual optic’ concept.The top optic
is made of high-gloss aluminium and ensures 12º, 24º
or 36º beam control.There is a seamless transition
from the lower optic (matt and white) to the rim.
The fixed version is offered with a flood optic (60º)
for general lighting. Furthermore, gold optics (24º
and 36º) are available in the adjustable and cardanic
versions, especially for food applications, to make the
merchandise look even fresher. Lamp, gear and
MBS262 GR accessories are delivered with the luminaire.
The Fugato family also includes even smaller versions
(cut-out 125mm) and a full range suited for CFL
lamps.

Applications
• Recreational areas
• Small independent food/non-food shops
• High-end fashion shops, boutiques
• Department stores, fashion shops

Technical description
• Lamps: Full range of CDM-T, SDW-T, SDW-TG,
and CDM-R lamps available.
• Gear/power supply: 230V-240V, conventional (IC)
or electronic ballast (EB)
• Gearbox remote from luminaire; connection
between gearbox and luminaire with 3-pole
Wieland connector
• Lamp position: vertical (base-up)
Dimensions in mm • Materials: die-cast aluminium housing, stainless
steel mounting frame, silver/gold aluminium
reflector
• Colour: white (RAL 9010) for fixed versions and
149

white (RAL 9010), grey and other RAL colours

70

82
º

for adjustable and cardanic versions

Ø 112
• Many options available. Contact your Philips
135

representative for more infomation.

Ø 154

Ø 193

9.38 LUMINAIRES INDOOR

Downlights Fugato Compact
Accent lighting
Installation • Maintenance: remove front to replace the lamp
• Cutout: ø 175 mm. (CDM-T/CDM-Tc); others have direct access.
• Mounting: install mounting frame, make electrical
connection and place optical unit into mounting Accessories
frame. Luminaire including lamp and accessory can • Colour, protection and UV filters. See next page
be installed directly into the ceiling. for a full overview.
• Thickness of false ceiling: 1 - 24 mm.

MBS264 CDM-T/SDW-TG/CDM-R111 MBS264 CDM-R30/SDW-T

MBS264 R111 WH MBS264 R30 WH MBS260 GR

MBS260 CDM-T/SDW-TG MBS260 SDW-T

LUMINAIRES INDOOR 9.39

Downlights Fugato Compact
Accent lighting
Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
MBS260 1xCDM-T150W/830 EB 36 PI WH 1,3 94340400
MBS260 1xCDM-T150W/830 IC/230V 36 PI WH 3,6 71238300
MBS260 1xCDM-T150W/830 IC/230V 36 PI GR 3,6 94339800
MBS260 1xCDM-T70W/830 IC/230V 36 PI WH 3,1 94156100
MBS260 1xCDM-T70W/830 IC/230V 24 PI WH 3,1 94159200
MBS260 1xCDM-T35W/830 IC/230V 36 PI WH 2,3 94154700
MBS260 1xCDM-T35W/830 IC/230V 24 PI WH 2,3 94157800
MBS262 1xCDM-T70W/830 EB 36 PI WH 2,1 71073000
MBS262 1xCDM-T70W/830 EB 24 PI WH 2,1 71253600
MBS262 1xCDM-TC70W/830 EB 24 PI GR 2,1 71260400
MBS262 1xCDM-T70W/830 IC/230V 36 PI GR 3,5 94326800
MBS262 1xCDM-T35W/830 IC/230V 24 PI WH 3,5 94134900
MBS262 1xCDM-TC35W/830 EB 12 PI GR 1,6 71254300
MBS264 1xCDM-T70W/830 IC/230V 36 PI WH 3,4 94152300
MBS264 1xCDM-T70W/830 IC/230V 24 PI WH 3,4 94151600
MBS264 1xCDM-T70W/830 IC/230V 24 PI GR 3,4 71269700
MBS264 1xCDM-T70W/830 IC/240V 36 PI WH 3,4 94242100
MBS264 1xCDM-T70W/830 IC/240V 24 PI WH 3,4 94241400
MBS264 1xCDM-R111-24-70W/830 EB PIWH 1,9 78410600
MBS264 1xSDW-TG50W K EB 24 PI WH 1,9 94250600
MBS264 1xSDW-T50W K IC/230V 24 PI WH 3,3 94147900
MBS264 1xSDW-T35W K IC/230V 24 PI WH 3,3 77924900

The installation of the mounting For MASTER Colour 35 W and Standard push-in connection
frame that comes with Fugato 70 W lamps a new miniature block with two contacts per pole
downlights is a common step to independent electronic ballast will for all connections, such as mains
take. One of the advantages of be offered with push-in and controls on the gearbox.
the frame is that both fixed and connection.This makes the total
adjustable downlights within one system extremely compact and
size make use of the same frame, more easy to use.
in that way they can even be
exchanged in a project after they
have been installed.

9.40 LUMINAIRES INDOOR

Downlights Fugato Compact
Accent lighting

Universal, 3 pole, plug-in

connector (Wieland GST18/3)
for fast connection from outside
the housing.

Colour filter Meat filter Sculptural lens

ZBS262 DF-RD/GN/BL/YE ZBS262 DF-MT ZBS262 LS
ZBS264 DF-RD/GN/BL/YE ZBS264 DF-MT ZBS264 LS
High-efficiency dichroic filters in Filter to enhance red rendition in ZBS260 LS
saturated red (RD), green (GN), the light for food applications. To elongate the beam in one
blue (BL), and yellow (YE). direction.

Anti-glare filter Anti UV filter (UV-A) Protection glass (IP 44)

ZBS262 GCG ZBS262 UV ZBS262 PG
ZBS264 GCG ZBS264 UV ZBS264 PG
ZBS260 GCG ZBS260 UV ZBS260 PG
To reduce glare, ensuring that UV filter to prevent yellowing of Protection glass which provides IP
displays are easy on the eye. merchandise on display. 44 protection.
LUMINAIRES INDOOR 9.41
Downlights Fugato Compact
Accent lighting
Accessory European Order
Used with: Code (EOC)
ZBS262 DF-RD Compact adjustable 71001300
ZBS264 DF-RD Compact cardanic 71002000
ZBS262 DF-GN Compact adjustable 71004400
ZBS264 DF-GN Compact cardanic 71005100
ZBS262 DF-BL Compact adjustable 71007500
ZBS264 DF-BL Compact cardanic 71008200
ZBS262 DF-YE Compact adjustable 71010500
ZBS264 DF-YE Compact cardanic 71011200
ZBS262 DF-MT Compact adjustable 71012900
ZBS264 DF-MT Compact cardanic 71013600
ZBS262 UV Compact adjustable 71034100
ZBS264 UV Compact cardanic 71035800
ZBS260 UV Compact fixed 71036500
ZBS262 LS Compact adjustable 71016700
ZBS264 LS Compact cardanic 71017400
ZBS260 LS Compact fixed 71018100
ZBS262 GCG Compact adjustable 71021100
ZBS264 GCG Compact cardanic 71022800
ZBS260 GCG Compact fixed 71023500
ZBS262 PG Compact adjustable 71039600
ZBS264 PG Compact cardanic 71040200
ZBS260 PG Compact fixed 71041900

9.42 LUMINAIRES INDOOR

LUMINAIRES INDOOR 9.43
Downlights MBS205/QBS205

MBS205/QBS205
Professional range of recessed technical downlights
with an internal diameter of 205 mm. Assembled with
a highly efficient aluminium reflector for double
ended metal halide and double ended halogen lamps.
All versions are including the aesthetical white impact
resistant polycarbonate ceiling ring, protection front
glass and pre-wired separate galvanised sheet steel
box for conventional and electronic control gear.

Applications
• Reception and public service areas
• Corridors and staircases
• Recreational areas
• Department stores

Technical description
• Power supply: 230 or 240V/50Hz, 220V/60Hz
MBS205 1xCDM-TD 70W • Ballast types :
Conventional compensated (IC)
Electronic (EB) for CDM-TD 70-150W
• Lamps:
CDM-TD 70-150W
MHN-TD 250W
Double-ended halogen 300W R7s
• Connection:
Screw-in connection block
• Material:
Die cast aluminium body, galvanised sheet steel
control gear box, polycarbonate ceiling ring, clear
tempered front glass, aluminium reflector.

Features
• Separate pre-wired gear box with ventilation slots
• High purity and high output aluminium reflector
on request • Die-cast aluminium housing with sturdy construction
• Double ring concept; aesthetical white impact
resistant polycarbonate ceiling ring mounted with
bayonet catch on an inner die cast aluminium
frame
Dimensions in mm • Adjustable swing out metal clips for easy
integration into various ceiling systems
• Straight forward maintenance by direct lamp
access from below.

Installation
• Ceiling cut-out diameter: 245 mm
• Suitable for ceiling thickness 1-40 mm by
positioning fasteners using screw metal clips
according to the thickness of the false ceiling after
removing the reflector.
• Safety distance: 0.8 -1.2 m above luminaire.

Accessories
• UV filter glass.
9.44 LUMINAIRES INDOOR
Downlights MBS205/QBS205

MBS205 1xCDM-TD 70W Galvanised sheet steel control Mounting clips

gear box
(L 260 mm x W 165 mm x
H 75 mm)
Preferred selection
Product ID Mains Order Code
MBS205 D 1XCDM-TD70W 240V IC SI 240V / 50Hz 9129 006 14971
MBS205 D 1XCDM-TD70W 230V IC SI 230V / 50Hz 9129 006 11971
MBS205 D 1XCDM-TD70W 220V IC SI 220V / 60Hz 9129 006 17971
MBS205 D 1XCDM-TD150W 240V IC SI 240V / 50Hz 9129 006 15971
MBS205 D 1XCDM-TD150W 230V IC SI 230V / 50Hz 9129 006 12971
MBS205 D 1XCDM-TD150W 220V IC SI 220V / 60Hz 9129 006 18971
MBS205 D 1XMHN-TD250W 240V IC SI 240V / 50Hz 9129 006 16971
MBS205 D 1XMHN-TD250W 230V IC SI 230V / 50Hz 9129 006 13971
MBS205 D 1XMHN-TD250W 220V IC SI 220V / 60Hz 9129 006 19971
QBS205 D 1XHAL300W R7S SI - 9129 006 30971

Accessory Order Code

ZBS205 UV glass filter available on request

LUMINAIRES INDOOR 9.45

Downlights MBS145

MBS145
Professional, recessed technical downlights with an
internal diameter of 145 mm. Assembled with a
highly efficient silver aluminium reflector with satin
surface finish for incandescent, single ended and
double-ended metal halide Master colour lamps. All
versions are including the aesthetical white impact
resistant polycarbonate ceiling ring, protection front
glass for Master colour tubular lamp types and pre-
wired separate galvanised sheet steel box for
conventional and electronic control gear.

Applications
• Atriums, corridors and lobbies
• Shopping centers
• Department stores
MBS145 1xCDM-TD • Fashion shops and boutiques
• Restaurants, cafetarias and hotels
• Museum, public buildings and waiting areas
• Airport terminal and interchanges

Technical description
• Power supply:
240V / 50Hz, 230V / 50Hz, 220V / 60Hz
• Ballast types:
Conventional; inductive (I) or compensated (IC)
Electronic
• Lamps:
CDM-T 70-150W, CDM-TD 70-150W
• Connection: Screw-in connection block
• Material
Die-cast aluminium body, galvanised sheet steel
control gear box, polycarbonate ceiling ring, clear
tempered front glass (when applicable), aluminium
on request
reflector.

Dimensions in mm

Product ID A
MBS145 1xCDM-T 215
MBS145 1xCDM-TD 250

9.46 LUMINAIRES INDOOR

Downlights MBS145

Features Installation
• Modular concept; same cut out diameter allows a • Ceiling cut-out diameter: 185 mm, suitable for
consistent appearance and interchangeable ceiling thickness 1-40 mm by positioning the
accessories and components fasteners using screw metal clips according to the
• Separate sheet steel pre-wired gear box with air thickness fo the ceiling boards.
ventilation slots • Safety distance: 0.8 m.
• Die-cast aluminium housing creates a compact
and sturdy architecture to interface with the Accessories
different accessories • Various decorative glass accessories, tempered
• Double ring concept; aesthetical white impact front glass and UV-filter.
resistant polycarbonate ceiling ring mounted with (see seperate section ‘Accessories 145-Series’)
bayonet catch on an inner die-cast aluminium
frame
• Adjustable swing out metal clips for easy
integration into various ceiling systems
• Straightforward maintenance by direct lamp
access from below.

MBS145 1xCDM-TD 70W Galvanised sheet steel gear MBS 145 metal clip
compartment (L 260 mm x
W 165 mm x H 75 mm)
Preferred selection
Product ID Order Code
MBS145 D 1XCDM-T070W 240V IC SI 240V / 50Hz 9129 005 84971
MBS145 D 1XCDM-T070W 230V IC SI 230V / 50Hz 9129 005 80971
MBS145 D 1XCDM-T070W 220V IC SI 220V / 60Hz 9129 005 88971
MBS145 D 1XCDM-T150W 240V IC SI 240V / 50Hz 9129 005 85971
MBS145 D 1XCDM-T150W 230V IC SI 230V / 50Hz 9129 005 81971
MBS145 D 1XCDM-T150W 220V IC SI 220V / 60Hz 9129 005 89971
MBS145 D 1XCDM-TD070W 240V IC SI 240V / 50Hz 9129 005 86971
MBS145 D 1XCDM-TD070W 230V IC SI 230V / 50Hz 9129 005 82971
MBS145 D 1XCDM-TD070W 220V IC SI 220V / 60Hz 9129 005 90971
MBS145 D 1XCDM-TD150W 240V IC SI 240V / 50Hz 9129 005 87971
MBS145 D 1XCDM-TD150W 230V IC SI 230V / 50Hz 9129 005 83971
MBS145 D 1XCDM-TD150W 220V IC SI 220V / 60Hz 9129 005 91971

LUMINAIRES INDOOR 9.47

Downlights FBH145

FBH145
Professional, low height recessed downlights for
CFL lamps with an internal diameter of 145 mm.
Assembled with a highly efficient aluminium reflector.
Designed for single or twin compact fluorescent
lamp configurations. All versions are including the
aesthetical white impact resistant polycarbonate
ceiling ring.The FBH145 range is compatible with all
available accessories of the 145-product family.

Applications
• Atriums, corridors and lobbies
• Shopping centers
• Department stores
• Fashion shops and boutiques
• Restaurants, cafetarias and hotels
FBH145 2xPLC 18W • Museum, public buildings and waiting areas
• Airport terminal and interchanges
• Small offices and conference rooms

Technical description
• Power supply:
230 or 240V / 50Hz, 127 or 220V / 60Hz
• Ballast:
Conventional: inductive (I) or compensated (IC)
Electronic: HFP, HFR
• Lamps:
1 or 2 x PL-C (13W, 18W, 26W) compact
fluorescent horizontal mounted
• Connection: Screw-in connection block
• Material: Die-cast aluminium body, deep drawn
galvanised sheet steel (integrated) control gear
versions with front glass
box, polycarbonate ceiling ring, aluminium
reflector.
IP44 on request
Features
Dimensions in mm • Low height of 106 mm
• Modular concept; same cut out diameter allows a
consistent appearance and interchangeable
accessories and components
• Integrated pre-wired gear box
• Die-cast aluminium housing creates a compact
and sturdy architecture to interface with the
different accessories

Product ID A
FBH145 1x/2xPL-C 13 / 18 W I(C) 247
FBH145 1x/2xPL-C 13 / 18 W HF 320
FBH145 1x/2xPL-C 26 W IC HF 320

9.48 LUMINAIRES INDOOR

Downlights FBH145

• Double ring concept; aesthetical white impact Installation

resistant polycarbonate ceiling ring mounted with • Ceiling cut-out diameter: 185 mm, suitable for
bayonet catch on an inner die-cast aluminium ceiling thickness 1-28 mm by positioning the quick
frame release metal clip according to the thickness of
• Adjustable swing out metal clips for easy the ceiling boards.
integration into various ceiling systems • Safety distance: 0.5 m.
• Straightforward maintenance by direct lamp
access from below. Accessories
• Various decorative glass accessories, tempered
front glass and UV filter, opal and prismatic covers
and high gloss cross reflector.
(see seperate section ‘Accessories 145-Series’)

Adjustable fixation brackets FBH145 gear compartment

Preferred selection
Product ID Mains Order Code
FBH145 D 1XPLC13W 240V I SI 240V / 50Hz 9129 005 06971
FBH145 D 1XPLC13W 230V I SI 230V / 50Hz 9129 005 00971
FBH145 D 1XPLC13W 220V I SI 220V / 60Hz 9129 005 12971
FBH145 D 1XPLC13W 127V I SI 127V / 60Hz 9129 005 18971
FBH145 D 1XPLC18W 240V I SI 240V / 50Hz 9129 005 07971
FBH145 D 1XPLC18W 230V I SI 230V / 50Hz 9129 005 01971
FBH145 D 1XPLC18W 220V I SI 220V / 60Hz 9129 005 13971
FBH145 D 1XPLC18W 127V I SI 127V / 60Hz 9129 005 19971
FBH145 D 1XPLC26W 240V IC SI 240V / 50Hz 9129 005 08971
FBH145 D 1XPLC26W 230V IC SI 230V / 50Hz 9129 005 02971
FBH145 D 1XPLC26W 220V IC SI 220V / 60Hz 9129 005 14971
FBH145 D 2XPLC13W 240V IC SI 240V / 50Hz 9129 005 09971
FBH145 D 2XPLC13W 230V IC SI 230V / 50Hz 9129 005 03971
FBH145 D 2XPLC13W 220V IC SI 220V / 60Hz 9129 005 15971
FBH145 D 2XPLC13W 127V IC SI 127V / 60Hz 9129 005 21971
FBH145 D 2XPLC18W 240V IC SI 240V / 50Hz 9129 005 10971
FBH145 D 2XPLC18W 230V IC SI 230V / 50Hz 9129 005 04971
FBH145 D 2XPLC18W 220V IC SI 220V / 60Hz 9129 005 16971
FBH145 D 2XPLC18W 127V IC SI 127V / 60Hz 9129 005 22971
FBH145 D 2XPLC26W 240V IC SI 240V / 50Hz 9129 005 11971
FBH145 D 2XPLC26W 230V IC SI 230V / 50Hz 9129 005 05971
FBH145 D 2XPLC26W 220V IC SI 220V / 60Hz 9129 005 17971

LUMINAIRES INDOOR 9.49

Downlights FBS145

Professional, recessed downlights with an internal

diameter of 145 mm. Assembled with a highly
efficient aluminium reflector for single compact
fluorescent lamp configurations. All versions are
including the aesthetical white impact resistant
polycarbonate ceiling ring.
The FBS145 range is compatible with all available
accessories of the 145-product family.

Applications
• Atriums, corridors and lobbies
• Shopping centers
• Department stores
• Fashion shops and boutiques
• Restaurants, cafeterias and hotels
• Museum, public buildings and waiting areas
FBS145 1xPL-C 26W • Airport terminal and interchanges
• Small offices and conference rooms

Technical description
• Power supply:
240V /50Hz
230V /50Hz
220V /60Hz
127V /60Hz
• Ballast types:
Conventional; inductive or compensated
HFP and HFR
• Lamps:
Vertical mounted compact fluorescent; 1 x PL-C
13W, 18W or 26W
versions with frontglass • Connection:
Screw-in connection block
on request • Material:
Die-cast aluminium body, polyamide control gear
box, polycarbonate ceiling ring, aluminium
Dimensions in mm reflector.

Type A
FBS145 1xPL-C 13 W (HF) 210
FBS145 1xPL-C 18 W (HF) 210
FBS145 1xPL-C 26 W (HF) 250

9.50 LUMINAIRES INDOOR

Downlights FBS145

Features Installation
• Modular concept; same cut out diameter allows a • Ceiling cut-out diameter: 185 mm, suitable for
consistent appearance and interchangeable ceiling thickness 1-28 mm by positioning the quick
accessories and components. release metal clip according to the thickness of
• Separate pre-wired polyamide control gear box the ceiling boards.
• Die-cast aluminium housing creates a compact • Safety distance: 0.5 m.
and sturdy architecture to interface with the
different accessories. Accessories
• Double ring concept; aesthetical white impact • Various decorative glass accessories, opal and
resistant polycarbonate ceiling ring mounted with prismatic covers.
bayonet catch on an inner die-cast aluminium (see seperate section ‘Accessories 145-Series’)
frame.
• Adjustable swing out metal clips for easy
integration into various ceiling systems.
• Straightforward maintenance by direct lamp
access from below.

Adjustable fixation brackets FBS145 separate gear

compartment

Preferred selection
Product ID Mains Order Code
FBS145 D 1XPL-C13W 240V I SI 240V/50Hz 9129 005 54971
FBS145 D 1XPL-C13W 230V I SI 230V/50Hz 9129 005 51971
FBS145 D 1XPL-C13W 220V I SI 220V/60Hz 9129 005 57971
FBS145 D 1XPL-C13W 127V I SI 127V/60Hz 9129 005 60971
FBS145 D 1XPL-C18W 240V I SI 240V/50Hz 9129 005 55971
FBS145 D 1XPL-C18W 230V I SI 230V/50Hz 9129 005 52971
FBS145 D 1XPL-C18W 220V I SI 220V/60Hz 9129 005 58971
FBS145 D 1XPL-C18W 127V I SI 127V/60Hz 9129 005 61971
FBS145 D 1XPL-C26W 240V IC SI 240V/50Hz 9129 005 56971
FBS145 D 1XPL-C26W 230V IC SI 230V/50Hz 9129 005 53971
FBS145 D 1XPL-C26W 220V IC SI 220V/60Hz 9129 005 59971
FBS145 D 1XPL-C26W 127V IC SI 127V/60Hz 9129 005 62971

LUMINAIRES INDOOR 9.51

Downlights FCS145/MCS145

FCS145/MCS145
Surface mounted technical downlights with highly
efficient 145 mm internal diameter (frosted) silver
reflector.
MCS145 for single and double ended Mastercolour
metal halide 150W or 70W lamp.
FCS145 for 1 x PL-C 26W or 2 x PL-C 26W lamp.
White decorative ring, protection glass and control
gear are supplied together with downlight.

Main applications
• Representative offices
• Reception and public service areas
• Corridors and staircases
• Recreational areas (sport halls, restaurants,
cafeterias)
FCS145/MCS145 • Department stores, Fashion shops
• Small independent food/non-food shops

Technical description
• Power supply:
- MCS 145: 240V/50Hz, 230V/50Hz or
220V/60Hz
- FCS 145: 240V/50HZ, 230V/50Hz, 220V/60Hz
or 127V/60Hz
They are all equipped with through-wiring
designed connector
• Gear: Control gear unit is supplied together with
the luminaire
• Material: Aluminium extrusion case and die-casting
ring, silver (frosted) aluminium reflector.

Installation
• Direct mounting to the ceiling by using the base
IP44 on request plate and then counter clockwise to turn the
luminaire onto the base plate. Open the side
Dimensions in mm maintenance door to connect electrical power
and tighten the safety screw.
• Safety: 0.5 – 0.8 m.
• Maintenance: direct lamp access (by removing the
decorative ring with protection glass).

Accessories
• Decorative glasses and UV filtering glass.
(See seperate section ‘Accesories 145-series’)

Product ID A
FCS 145 250
MCS 145 300

9.52 LUMINAIRES INDOOR

Downlights FCS145/MCS145

Mounting plate Maintenance side door

Preferred selection
Product ID Mains Order Code
FCS145 D 1XPL-C26W 240V IC SI 240V / 50Hz 9129 017 02971
FCS145 D 1XPL-C26W 230V IC SI 230V / 50Hz 9129 017 01971
FCS145 D 1XPL-C26W 220V IC SI 220V / 60Hz 9129 017 03971
FCS145 D 1XPL-C26W 127V IC SI 127V / 60Hz 9129 017 04971
FCS145 D 2XPL-C26W 240V IC SI 240V / 50Hz 9129 017 06971
FCS145 D 2XPL-C26W 230V IC SI 230V / 50Hz 9129 017 05971
FCS145 D 2XPL-C26W 220V IC SI 220V / 60Hz 9129 017 07971
FCS145 D 2XPL-C26W 127V IC SI 127V / 60Hz 9129 017 08971
MCS145 1XCDM-T70W 240V IC SI 240V / 50Hz 9129 017 22971
MCS145 1XCDM-T70W 230V IC SI 230V / 50Hz 9129 017 21971
MCS145 1XCDM-T70W 220V IC SI 220V / 60Hz 9129 017 23971
MCS145 1XCDM-T150W 240V IC SI 240V / 50Hz 9129 017 25971
MCS145 1XCDM-T150W 230V IC SI 230V / 50Hz 9129 017 24971
MCS145 1XCDM-T150W 220V IC SI 220V / 60Hz 9129 017 26971
MCS145 1XCDM-TD70W 240V IC SI 240V / 50Hz 9129 017 28971
MCS145 1XCDM-TD70W 230V IC SI 230V / 50Hz 9129 017 27971
MCS145 1XCDM-TD70W 220V IC SI 220V / 60Hz 9129 017 29971
MCS145 1XCDM-TD150W 240V IC SI 240V / 50Hz 9129 017 31971
MCS145 1XCDM-TD150W 230V IC SI 230V / 50Hz 9129 017 30971
MCS145 1XCDM-TD150W 220V IC SI 220V / 60Hz 9129 017 32971

LUMINAIRES INDOOR 9.53

Downlights Accessories 145-Series

GBS145 O opal cover ZZG145 GT 50 frosted glass GBS145 P prismatic cover

ZZG145 DG 12 ZZG145 DG 13 ZZG145 DG 14

ZZG145 DG 22 ZZG145 DG 23 ZZG145 DG 24

FBH145 with GBS145 C

9.54 LUMINAIRES INDOOR
Downlights Accessories 145-Series

Accessory Order code

ZZG145 D DG 12 9129 013 21971
ZZG145 D DG 13 9129 013 22971
ZZG145 D DG 14 9129 013 23971
ZZG145 D DG 22 9129 013 24971
ZZG145 D DG 23 9129 013 25971
ZZG145 D DG 24 9129 013 26971
ZZG145 D GT 50 FROSTED GLASS 9129 013 27971
ZZG145 D GT 51 PROTECTION GLASS 9129 013 28971
ZZG145 D GT 52 UV FILTER 9129 013 29971
GBS145 C D HIGH GLOSS REFLECTOR* 9129 013 31971
GBS145 D OPAL COVER** 9129 013 32971
GBS145 D PRISMATIC COVER** 9129 013 33971

* Only for FBH 145

** Only for FBS/FBH 145 series

LUMINAIRES INDOOR 9.55

Downlights FBH059

FBH 059
Recessed downlight with frosted reflector and
polished strip faceted surface for the upper section
designed for 2 x PL-C18W/26W compact
fluorescent lamp. A standard ballast is integrated with
luminaires.

Applications
• Atriums, corridors and lobbies in buildings
• Mixed use shopping centres-corridors and lobbies
• Department stores-general lighting
• High-end fashion shops and boutiques
• Restaurants, cafeterias and hotels
• Museum displays, public buildings and waiting areas
• Transport buildings eg airport terminal and
interchanges
FBH059 • Small offices and conference room.

Technical description
• Power supply: 240V / 50Hz, 230V / 50Hz,
220V / 60Hz, 127V / 60Hz
• Ballast types: Conventional; compensated
• Lamps: Horizontal mounted compact fluorescent;
2 x PL-C 18W or 26W
• Material: Steel made body and powdered finish.
Frosted aluminium reflector.

Features
• FBH059 low height of 132 mm depth.
• Adjustable swing out metal clip integrates easily
into various ceiling systems
• Maintenance is simplified with direct lamp access
from below.

Installation
• Ceiling cut-out diameter: 230-245 mm, suitable for
Dimensions in mm ceiling thickness 1-28 mm by positioning the quick
release metal clip according to the thickness of the
ceiling boards.
• Safety distance: 0.5 m.
• Maintenance: direct lamp access below.

9.56 LUMINAIRES INDOOR

Downlights FBH059

FBH 059

Preferred selection
Product ID Mains Order code
FBH059 D 2XPLC18W 240V IC SI 240 / 50Hz 9129 013 03971
FBH059 D 2XPLC18W 230V IC SI 230 / 50Hz 9129 013 01971
FBH059 D 2XPLC18W 220V IC SI 220 / 60Hz 9129 013 05971
FBH059 D 2XPLC18W 127V IC SI 127 / 60Hz 9129 013 07971
FBH059 D 2XPLC26W 240V IC SI 240 / 50Hz 9129 013 04971
FBH059 D 2XPLC26W 230V IC SI 230 / 50Hz 9129 013 02971
FBH059 D 2XPLC26W 220V IC SI 220 / 60Hz 9129 013 06971
FBH059 D 2XPLC26W 127V IC SI 127 / 60Hz 9129 013 08971

LUMINAIRES INDOOR 9.57

Downlights Europa 2

Europa 2
Fixed recessed downlights for compact fluorescent
PL-C lamps with automatic fixing clips ensuring quick
and easy installation and highly efficient improved
optics. Available in three formats: FBS120, FBS120 HF
and FBS122. Equipped with either a prismatic light
control panel (P), an opal cover (O), a clear front
panel (G) or a glare control louvre (L). Available in a
ready-to-install kit version, with premounted lamps
and a preconnected cable with a Wieland “quick
connector”.

Applications
• Recreational areas
• Public buildings, hospitals and schools
• Discount stores, hyper-/ supermarkets,
FBS120 P do-it-yourself shops
• Department stores, fashion shops

Technical description
• Gear/power supply:
HF: 220 V - 240 V/50 Hz
conventional: 230 or 240V/50 Hz, I or IC
• Lamp position: horizontal
• Lamps: 1x or 2x 13 W, 18W, 26W
• Material: polyester gearbox (gear cover
polypropylene), high brilliant facetted metallised
reflector

Installation
• Cut-out: Ø 223 mm FBS120, Ø 158 mm FBS122
for opal diffuser/clear front panel versions • Thickness of false ceiling: 3 - 24 mm (improved
mounting for soft ceilings by means of easily
adjustable clips).
• Method: by means of a fast-clip system.
• Safety distance: 0.5 m.
Dimensions in mm • Through-wiring possibility for FBS120 with
conventional gear.

FBS120

9.58 LUMINAIRES INDOOR

Downlights Europa 2

FBS120 HF FBS122

FBS120 O FBS120 G FBS120 L

LUMINAIRES INDOOR 9.59

Downlights Europa 2

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
FBS120 1xPL-C/2P18W/840 I 230V O W2 1.45 0.40 66202200
FBS120 1xPL-C/2P18W/840 I 230V P W2 1.45 0.62 66018900
FBS120 1xPL-C/2P18W/840 I 230V G W2 1.45 0.59 66205300
FBS120 1xPL-C/2P26W/840 I 230/240V O W2 1.45 - 66214500
FBS120 1xPL-C/2P26W/840 I 230/240V P W2 1.45 0.63 66030100
FBS120 1xPL-C/2P26W/840 I 230/240V G W2 1.45 0.55 66033200
FBS120 2xPL-C/2P18W/840 I 230V L W2 1.45 0.56 66024000
FBS120 2xPL-C/2P18W/840 I 230V O W2 1.45 0.33 66021900
FBS120 2xPL-C/2P18W/840 I 230V P W2 1.02 0.58 66020200
FBS120 2xPL-C/2P18W/840 I 230V G W2 1.45 0.48 66023300
FBS120 2xPL-C/2P26W/840 I 230/240V L W2 1.45 0.55 66035600
FBS120 2xPL-C/2P26W/840 I 230/240V P W2 1.45 0.56 66032500
FBS120 2xPL-C/2P26W/840 I 230/240V G W2 1.45 0.42 66034900
FBS120 2xPL-C/4P18W/840 HF 230/240V L W2 0.80 0.56 66054700
FBS120 2xPL-C/4P18W/840 HF 230/240V O W2 0.80 0.33 66208400
FBS120 2xPL-C/4P18W/840 HF 230/240V P W2 0.80 0.58 66207700
FBS120 2xPL-C/4P18W/840 HF G W2 0.80 0.48 66222000
FBS120 2xPL-C/4P26W/840 HF 230/240V L W2 0.80 0.55 66231200
FBS120 2xPL-C/4P26W/840 HF 230/240V P W2 0.80 0.56 66055400
FBS120 2xPL-C/4P26W/840 HF G W2 0.80 0.42 66233600
FBS122 1xPL-C/2P13W/840 I 230V O W2 1.35 0.34 66243500
FBS122 1xPL-C/2P13W/840 I 230V P W2 1.35 0.58 66065300
FBS122 1xPL-C/2P13W/840 I 230V G W2 1.35 0.58 66246600
FBS122 2xPL-C/2P13W/840 I 230V O W2 1.35 0.32 66067700
FBS122 2xPL-C/2P13W/840 I 230V P W2 1.35 0.55 66066000
FBS122 2xPL-C/2P13W/840 I 230V G W2 1.35 0.54 66069100
FBS122 2xPL-C/2P13W/840 I 240V P W2 1.35 0.55 66076900
FBS122 2xPL-C/2P13W/840 I 240V G W2 1.35 0.54 66077600

Short optics description

O Opal cover (polycarbonate)
P Prismatic cover (polycarbonate)
G Clear front panel (polycarbonate)
L Glare control louvre

Accessory Accessory Description European Order

for FBS120 for FBS122 Code (EOC)
FBS120 FBS122
GBS120 RG GBS122 RG small Decorative glass 66631000 66448400
ZBS120 DR ALU ZBS122 DR ALU small Decorative ring aluminium 66632700 66449100
ZBS120 DR GO ZBS122 DR GO small Decorative ring gold 66633400 66630300

9.60 LUMINAIRES INDOOR

Downlights Europa 2

LUMINAIRES INDOOR 9.61

Downlights Latina square

Latina square
Recessed square downlight for 2 x 18W and 2 x 26W
compact fluorescent PL-C lamps with spring
fasteners for easy and quick installation. Available in
ready-to-install kit versions with pre-mounted lamps
and pre-connected separate gearbox.

Applications
• Recreational areas
• Public buildings, hospitals and schools
• Discount stores, hyper-/supermarkets,
do-it-yourself shops
• Department stores, fashion shops

Technical description
• Power supply: 230V (240V available on request)
FBH022 • Gear: conventional (I or IC) ballasts in a separate
box wired to the fitting
• Lamp position: horizontal
• Lamps: 2 x 18W or 2x26W PL-C/2P
• Material: metal body and gear box; high gloss
anodised metal reflector; decorative glass plate
(included with the luminaire)

Installation
• Cut-out: Ø205 mm
• Thickness of false ceiling: 2-24 mm
• Method: position spring fasteners
• Safety distance: 800 mm
• Through-wiring possible

Dimensions in mm

9.62 LUMINAIRES INDOOR

Downlights Latina square

Decorative cover glass (delivered

with the luminaire) fits seamlessly
in the square metal rim.

Separate pre-connected metal

gear unit.

Preferred selection
Product ID European Order
Code (EOC)
FBH022 2xPL-C/2P18W/840 K I 230V 14858800
FBH022 2xPL-C/2P18W/840 K IC 230V 14862500
FBH022 2xPL-C/2P26W/840 K I 230V 14860100
FBH022 2xPL-C/2P26W840 K IC 230V 14864900

LUMINAIRES INDOOR 9.63

Downlights Latina

Latina
Recessed downlight for 2 x 18 W and 2 x 26 W
compact fluorescent PL-C lamps with spring
fasteners for easy and quick installation. Available in
ready-to-install kit versions with pre-mounted lamps
and pre-connected separate gearbox.

Applications
• Recreational areas
• Public buildings, hospitals and schools
• Discount stores, hyper-/supermarkets, do-it-
yourself shops
• Department stores, fashion shops

Technical description
• Power supply: 230 V (240 V available on request)
FBH020 • Gear: conventional ballasts (I or IC) in a separate
box wired to the fitting
• Lamp position: horizontal
• Lamps: 2 x 18 W or 2 x 26 W PL-C/2P
• Material: metal body and gear box; high gloss
anodized metal reflector.

Installation
• Cut-out: Ø 190 mm
• Thickness of false ceiling: 2-24 mm
• Method: position spring fasteners
• Safety distance: 800 mm
• Through-wiring possible

Accessories
• Frosted glass cover (GBH020 FRG)
• Clear decorative glass cover (GBH020 RG)

Dimensions in mm

9.64 LUMINAIRES INDOOR

Downlights Latina

FBH020
Separate pre-connected metal
gear unit

Preferred selection
Product ID Weight European Order
Code (EOC)
FBH020 2xPL-C/2P18W/840 K I 230V LIS 0.9 available on request
FBH020 2xPL-C/2P18W/840 K IC 230V LIS 0.9 available on request
FBH020 2xPL-C/2P26W/840 K I 230V LIS 0.9 available on request
FBH020 2xPL-C/2P26W/840 K IC 230V LIS 0.9 available on request
Lamps included. 230V/50Hz. 240V versions available on request

GBH020 FRG GBH020 RG

frosted glass cover clear decorative glass cover
Accessory European Order
Code (EOC)
GBH020 FRG 5 pcs Frosted glass cover, 5 pcs per box available on request
GBH020 RG 5 pcs Clear decorative glass cover, 5 pcs per box available on request

LUMINAIRES INDOOR 9.65

Downlights QBS105

QBS105
Standard professional recessed extra-low voltage
downlight for dichroic halogen lamps.

Main application
• Representative offices
• Conference rooms
• Small offices
• General open plan offices
• Recreation areas (sport halls, restaurants,
cafeterias)
• Department stores, fashion shops
• Small independent food/non-food shops
• High-end fashion shops, boutiques

Technical description
QBS105-1 • Power supply: 12V.
Transformer to be ordered separately
• Lamp position:Vertical downward
• Material: Aluminium casting body, steel painted
decorative ring and reflector.

Installation and mounting

• Cut-out diameter: 105-110 mm
• Thickness of ceiling: 1-32 mm
• Method: position the spring fastener according to
thickness of the false ceiling
• Safety: 0.5 m
• Maintenance: direct lamp access by removing the
front cap.

Accessories
• Lamp driver: electronic transformer EHC 250/350.

Options
Reflector:
01- white painted (fixed)
Dimensions in mm
02- polished silver (fixed)
03- satin silver (fixed)
04- black anti-glare louver (fixed)
05- pin spot (fixed)
06- slit (adjustable vert=30º, horz=360º rot.)
07- eyeball (adjustable vert=25º, horz=360º rot.)
08- inner adjustable device (vert=35º, horz=360º).

Colour and finishes

• Outer ring available in white powder coated finish
and chrome metallic finish.

9.66 LUMINAIRES INDOOR

Downlights QBS105

QBS105-1

QBS105-2 QBS105-3 QBS105-4

QBS105-2 QBS105-3 QBS105-4

LUMINAIRES INDOOR 9.67

Downlights QBS105

QBS105-5 QBS105-6 QBS105-7

QBS105-5 QBS105-6 QBS105-7

QBS105-8 QBS105-8
Preferred selection
Product ID Order Code
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 01 9129 006 31971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 02 9129 006 32971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 03 9129 006 33971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 04 9129 006 34971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 05 9129 006 35971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 06 9129 006 36971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 07 9129 006 37971
QBS105 D 1XHAL-PR50-50W-GU-5.3 Type 08 9129 006 38971

9.68 LUMINAIRES INDOOR

Downlights QBS105

LUMINAIRES INDOOR 9.69

Downlights Zadora Adjustable

Zadora Adjustable
Recessed adjustable downlights for MASTER Line
dichroic halogen lamp with beams of 8°, 24°, 36°
and 60° and Twistline Alu lamps. Available in white,
chrome, gold, brushed aluminium, black, matt satin,
metal grey, and black nickel.
Ready-to-install kit versions (downlight, lamp,
transformer) available.

Applications
• Office spaces
• Small independent food/non-food shops
• High-end fashion shops, boutiques

Technical description
• Power supply: 12 V or 230 V (Twistline Alu)
QBD570 ALU • Lamp position: vertical
• Orientation from vertical: 30°
• Lamp socket:
GU5.3: MASTER Line
GZ10:Twistline Alu

Installation
• Cut-out: Ø 75
• Thickness of false-ceiling: 1 - 25 mm.
• Method: springs.
• Safety distance: 0.5 m.
• Maintenance: direct lamp access (front clip).

Dimensions in mm

QBD570 WH

9.70 INDOOR LUMINAIRES

Downlights Zadora Adjustable

QBD570 BK QBD570 CR QBD570 MAT

QBD570 GO QBD570 ANT QBD570 GR

Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
12V versions.Without lamp and transformer
QBD570 1xHAL-MR50-45W 12V BR ALU 0,2 57331199
QBD570 1xHAL-MR50-45W 12V BR ANT 0,2 57335999
QBD570 1xHAL-MR50-45W 12V BR BK 0,2 57332899
QBD570 1xHAL-MR50-45W 12V BR CR 0,2 57329899
QBD570 1xHAL-MR50-45W 12V BR GO 0,2 57330499
QBD570 1xHAL-MR50-45W 12V BR GR 0,2 57334299
QBD570 1xHAL-MR50-45W 12V BR MAT 0,2 57333599
QBD570 1xHAL-MR50-45W 12V BR WH 0,2 57328199
HF 230-240V/12V versions. Lamp (50W/36º) and electronic gear included
QBD570 1xHAL-FR50-50W K ET 230/12V ALU 0,3 57435600
QBD570 1xHAL-FR50-50W K ET 230/12V CR 0,3 57433200
QBD570 1xHAL-FR50-50W K ET 230/12V GO 0,3 57434900
QBD570 1xHAL-FR50-50W K ET 230/12V WH 0,3 57432500
Twistline 230V versions. Lamp (40W/40º dichroic) included
QBD570 1xHAL-TR40-50WGZ10 K 230V II WH 0,3 57312000
QBD570 1xHAL-TR40-50WGZ10 K 230V II GO 0,3 57314400
QBD570 1xHAL-TR40-50WGZ10 K 230V II CR 0,3 57313700
QBD570 1xHAL-TR40-50WGZ10 K 230V II ALU 0,3 57315100
ALU = Aluminium GO = Gold
ANT = Anthracite GR = Grey
BK = Black MAT = Matt satin
CR = Chrome WH = White

INDOOR LUMINAIRES 9.71

Downlights Zadora Fixed

Zadora Fixed
Recessed fixed downlights for MASTER Line dichroic
halogen lamps with beams of 8°, 24°, 36° and 60°,
and Twistline Alu lamps. Available in white, chrome,
gold, brushed aluminium, black, matt satin, metal grey
and black nickel. Ready-to-install kit versions
(downlight, lamp, transformer) available.

Applications
• Office spaces
• Small independent food/non-food shops
• High-end fashion shops, boutiques

Technical description
• Power supply: 12 V or 230 V (Twistline Alu)
• Lamp position: vertical
QBS570 WH • Lamp socket:
GU5.3: MASTER Line
GZ10:Twistline Alu
• Material: die-cast aluminium

Installation
• Cut-out:
Ø 64 mm QBS570
• Thickness of false-ceiling: 1-18 mm
• Method: springs.
• Safety distance: 0.5 m.
Maintenance: direct lamp access (front clip).

Dimensions in mm

QBS570 ALU

9.72 LUMINAIRES INDOOR

Downlights Zadora Fixed

QBS570 CR QBS570 MAT QBS570 BK

QBS570 ANT QBS570 GR QBS570 GO

Preferred selection
Product ID Colour Weight European Order
(see below) (kg) Code (EOC)
12V versions.Without lamp and transformer
QBS570 1xHAL-MR50-45W 12V BR WH 0,14 57320599
QBS570 1xHAL-MR50-45W 12V BR MAT 0,14 57325099
QBS570 1xHAL-MR50-45W 12V BR GR 0,14 57326799
QBS570 1xHAL-MR50-45W 12V BR GO 0,14 57322999
QBS570 1xHAL-MR50-45W 12V BR CR 0,14 57321299
QBS570 1xHAL-MR50-45W 12V BR BK 0,14 57324399
QBS570 1xHAL-MR50-45W 12V BR ANT 0,14 57327499
QBS570 1xHAL-MR50-45W 12V BR ALU 0,14 57323699
HF 230-240V/12V versions. Lamp (50W/36º) and electronic gear included
QBS570 1xHAL-FR50-50W K ET 230/12V WH 0,2 57424000
QBS570 1xHAL-FR50-50W K ET 230/12V GO 0,2 57426400
QBS570 1xHAL-FR50-50W K ET 230/12V CR 0,2 57425700
QBS570 1xHAL-FR50-50W K ET 230/12V ALU 0,2 57427100
Twistline 230V versions. Lamp (40W/40º dichroic) included
QBS570 1xHAL-TR40-50WGZ10 K 230V II ALU 0,2 57307600
QBS570 1xHAL-TR40-50WGZ10 K 230V II CR 0,2 57305200
QBS570 1xHAL-TR40-50WGZ10 K 230V II GO 0,2 57306900
QBS570 1xHAL-TR40-50WGZ10 K 230V II WH 0,2 57304500

ALU = Aluminium GO = Gold

ANT = Anthracite GR = Grey
BK = Black MAT = Matt satin
CR = Chrome WH = White

LUMINAIRES INDOOR 9.73

Transformers

ZKL560 50VA WH
Very low voltage 50 VA toroidal
transformer.
230 V - 12 V - 50/60 Hz.
Protected against overheating,
overloads and short-circuits.

Installation
Ready to use - quick to install.
Opening cap.
Automatic cable holder.
Automatic secondary connection.
ZKL560 50VA WH Dimensions in mm Self-screwable base.
Unlockable baseplate.
Minimum charge 20 W.
Product ID Colour Weight (kg) EOC
ZKL560 50VA WH White 0.63 14333000

ZKL560 310VA WH
Very low voltage 310 VA toroidal
transformer.
230 V - 12 V - 50/60 Hz.
Protected against overheating,
overloads and short-circuits.

Installation
Ready to use - quick to install.
Single terminal block on the 230 V
primary circuit.
Triple terminal block on the 12 V
ZKL560 310VA WH Dimensions in mm secondary circuit.
Self-screwable base.
Unlockable baseplate.
Minimum charge 20 W.
Product ID Colour Weight (kg) EOC
ZKL560 310VA WH White 3.00 14334700

ZKL920 60VA HF WH
Very low voltage 60 VA dimmable
electronic transformer.
230 V - 240 V - 12 V - 50/60 Hz.
Very compact size.Trailing edge-
leading edge dimming.
Protected against overheating,
overloads and short-circuits.

Installation
Ready to use - quick to install.
Min./ Max. charge 10 W/60 W.
ZKL920 60VA HF WH Dimensions in mm Maximum distance to the lamp 2 m.
Product ID Colour Weight (kg) EOC
ZKL920 60VA HF WH White 0.08 14335499

9.74 LUMINAIRES INDOOR

Transformers

ZKL920 105VA HF WH
Very low voltage 105 VA
dimmable electronic transformer.
230 V - 240 V - 12 V - 50/60 Hz.
Very compact size.Trailing edge-
leading edge dimming.
Protected against overheating,
overloads and short-circuits.

Installation
Ready to use - quick to install.
Min./ Max. charge 35 W/105 W.
ZKL920 105VA HF WH Dimensions in mm Maximum distance to the lamp 2 m.
Product ID Colour Weight (kg) EOC
ZKL920 105VA HF WH White 0.10 14336199

ZKL920 150VA HF WH
Very low voltage 150 VA
dimmable electronic transformer.
230/240 V - 12 V - 50/60 Hz.
Very compact size.Trailing edge-
leading edge dimming.
Protected against overheating,
overloads and short-circuits.

Installation
Ready to use - quick to install.
Double terminal block on the
ZKL920 105VA HF WH Dimensions in mm 230 V primary circuit.
Triple terminal block on the 12 V
secondary circuit.
Min/max charge 30 W/150 W.
Maximum distance to the lamp 2 m.
Product ID Colour Weight (kg) EOC
ZKL920 105VA HF WH White 0.13 14337899

LUMINAIRES INDOOR 9.75

Projectors Monza

Monza
Adjustable projectors with aluminium reflector for
halogen Plusline or (with integrated control gear) for
White SON SDW-T and MASTER Colour CDM-T
and CDM-TD lamps. Halogen and MASTER Colour
versions are equipped with protection glass. UV filter
available as accessory. For direct mounting on base
plate or 2- or 3-circuit universal tracks.

Applications
• Small independent food/non-food shops
• Discount stores, hyper-/supermarkets,
do-it-yourself shops
• Department stores, fashion shops

Technical description
MCS440/MCS450 WH • Power supply: 230 V or 240 V
• Gear: integrated (for discharge versions)
• Lamp socket: R7s: Plusline, PG12-1: SDW-T,
G12: CDM-T, Rx7s: CDM-TD
• Orientation: 350° horizontal and 2 x 75° vertical
• Material: die-cast aluminium
• Colours: white (RAL 9010) and metallic grey

Installation
• Mounting:
– direct on ceiling with base plate (BA).
– versions for installation on universal 3-circuit
Euro-DIN tracks, available on request.
• Safety distance: 1 m for halogen, 0.8 m for
discharge lamps.
• Maintenance: lamp access after removing front
glass.

Accessories
• Barndoors and UV filter. (available on request)
Dimensions in mm

MCS410/440/450 MCS440/MCS450 GR

9.76 INDOOR LUMINAIRES

Projectors Monza

MCS420/MCS430 WH MCS420/430

QCS400 WH QCS400

Preferred selection
Product ID Colour Weight European Order
GR = Grey (kg) Code (EOC)
WH = White
MCS410 1xSDW-T100W IC 230V BA GR GR 3.70 82281500
MCS410 1xSDW-T100W IC 230V BA WH WH 3.70 82280800
MCS420 1xCDM-TD70W IC 230V BA GR GR 3.40 82257000
MCS420 1xCDM-TD70W IC 230V BA WH WH 3.40 82256300
MCS430 1xCDM-TD150W IC 230V BA GR GR 4.30 82263100
MCS430 1xCDM-TD150W IC 230V BA WH WH 4.23 82262400
MCS440 1xCDM-T70W IC 230V BA GR GR 3.23 82269300
MCS440 1xCDM-T70W IC 230V BA WH WH 3.30 82268600
MCS450 1xCDM-T150W IC 230V BA GR GR 4.20 82275400
MCS450 1xCDM-T150W IC 230V BA WH WH 4.20 82274700
QCS400 1xHAL-TDS300W BA GR GR 1.00 82251800
QCS400 1xHAL-TDS300W BA WH WH 1.00 82250100

INDOOR LUMINAIRES 9.77

High-bay luminaires HDK900

HDK900
A sturdy long lasting quality electrical gear housing of
compact and elegant design, suitable to give together
with a range of reflector types and attachments, the right
solution for low and high bay lighting requirement.

Main applications
• Industrial areas
• Sports halls
• Commercial areas or other large halls requiring
luminaires, suitable for high mounting ceiling.

Features
• The gear housing can be combined with standard
Philips aluminium reflectors.
• For use with any of the following HID lamps:
HDK900 150W/250W or 400W – HPL-N, SON or HPI
BU (S) lamps.
• The aluminium material is of heat, corrosion and
UV resistant type.
• The luminaire is delivered standard in unpainted
version. Painted versions are available upon request.
• IP65 ingress protection rating in the gear housing
is secured through the use of a neoprene gasket
between the housing.
• The gear box uses Philips standard ballasts and is
using silicone cable to improve resistance against
the heat inside the housing.
• The luminaire is suitable for indoor and outdoor
use at an ambient temperature of max 45°C.
• Luminaires in combination with narrow beam
reflectors are ideal for lighting in very high halls, or
gear compartment halls with high obstacles and or high machines.
• Luminaires in combination with wide beam
reflectors are suited for relatively low halls and
areas where vertical illuminance is required.
Dimensions in mm • Each reflector can be fitted with a glass dust-cover
for applications in industry and humid areas.

9.78 LUMINAIRES INDOOR

High-bay luminaires HDK900

Materials and finish Installation and mounting

• The range consists of an aluminium gear housing, • The luminaire can be mounted by hook, pipe,
mounting cups and a mounting plate. tanchion or directly to the ceiling.
• The compact and sturdy luminaire is made of high • Mains cable entry is made through the mounting
grade die cast aluminium (very low cu content). system.
• The gear housing is closed with stainless steel
clips. Accessories
• Narrow and wide beam reflectors.
• Glass cover for reflectors (HPI-T lamps).
• Mounting hook for HDK 900

Preferred selection

Product ID Order Code

HDK900 SON150W 230V 50Hz 9145 223 30232
HDK900 SON250W 230V 50Hz 9145 223 30132
HDK900 SON400W 230V 50Hz 9145 223 30032
HDK900 SON150W 240V 50Hz 9145 223 30235
HDK900 SON250W 240V 50Hz 9145 223 30135
HDK900 SON400W 240V 50Hz 9145 223 30035
HDK900 HPL-N250W 230V 50Hz 9145 223 30532
HDK900 HPL-N250W 240V 50Hz 9145 223 30535
HDK900 HPI-P250W-BU 230V 50Hz 9145 223 30432
HDK900 HPI-P250W-BU 240V 50Hz 9145 223 30435
HDK900 HPL-N400W/HPI-P400W-BUS 230V 50Hz 9145 223 30332
HDK900 HPL-N400W/HPI-P400W-BUS 240V 50Hz 9145 223 30335
Other voltages/frequencies available on request

Reflectors and accessories Description Order Code

ZDK007 NB Narrow beam reflector, matt finish 9145 223 40431
ZDK009 WB Wide beam reflector, matt finish 9145 223 40531
ZDK004 Glass cover for ZDK009 WB, temper glass 4 mm. 9145 223 40131
ZDK005 Glass cover for ZDK007 NB, temper glass 4 mm. 9145 223 40231
MOUNTING HOOK HDK900 4416 101 17480

LUMINAIRES INDOOR 9.79

High-bay luminaires Cabana

Cabana
Functional high bay indoor luminaire for high-
intensity discharge lamps; supplied with reflector.
The reflector can be attached to the unit without
screws by means of an ingenious bayonet construction.
The innovative external beam regulator enables easy
lamp adjustment (narrow or wide beam) on the
installation site.The external connector allows
electrical connection without opening the unit.
Two pigtail hooks are delivered with the product for
either one- or two-point suspension. A protective
cover is supplied with the HPI-P lamp versions and
can be ordered separately for other versions.
Two standard versions are available:
• Compact version with unit and reflector in one
box;
HPK150 • KIT version with unit, reflector and lamp installed.

Applications
• Normal industries
• Dust- and moisture-protected (IP65 version)

Technical description
• Gear/power supply: conventional: 230 V or 240 V
• Lamp: 1x HPI-Plus, SON or HPL
• Material: housing of cast aluminium and
polycarbonate, reflector of anodised aluminium,
glass cover of thermally hardened glass

Installation
• Mounting: individual
• Two hooks delivered with the product for one- or
two-point suspension with cable or chain.
Bracket available for installation with tube or
threaded rod.
• Reflector attached to the unit without screws by
Dimensions in mm means of ingenious bayonet construction.
• External connector allows connection to mains
without opening the unit.

Accessories
• Mounting bracket for installation to ceiling, cable
duct, threaded rod.
• Glass cover with four clips, seal and retaining
cable.

9.80 LUMINAIRES INDOOR

High-bay luminaires Cabana

Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
HPK150 1xHPI-P400W-BU K IC IP65 KIT 9,5 14232600
HPK150 1xHPI-P400W-BU K IC 240V IP65 KIT 9,5 14286900
HPK150 1xHPI-P250W-BU K IC IP65 KIT MB 8,5 14257900
HPK150 1xHPL-N250W K IC IP23 KIT MB 8,4 14273900
HPK150 1xSON400W K IC IP65 KIT MB 11,1 14260900
HPK150 1xSON400W K IC 240V IP65 KIT 11,1 14288300
IC versions equipped with 230V/50Hz gear unless specified otherwise. Other voltages/frequencies available on request

Legend
MB Mounting bracket included
IP65 Includes glass cover

ZPK150 MB ZPK150 GC
Mounting bracket for installation Glass cover with four clips, seal
to ceiling, cable duct, threaded rod. and retaining cable.

Accessories
Product ID European Order
Code (EOC)
ZPK150 MB mounting bracket 14303300
ZPK150 GC glass cover 14301900

LUMINAIRES INDOOR 9.81

Waterproof luminaires Pacific TCW215

Pacific TCW215
Functional dust-, and jetproof luminaire for TL-D
fluorescent lamps. Fixation of the cover to the
housing without additional lockers, but by innovative
concept with integrated fixation points. Gear tray,
2 stainless steel ceiling fixation clips and cable entries
(membranes) supplied with the luminaire.
Lamps included with 240 V versions.
Choice of different standard versions available:
• versions 1/2 x 18 W, 1/2 x 36 W,
1/2 x 58 W (TL-D),
• ready-to-install, including lamp(s) and Waterproof
External Connector (WEC),
• equipped with through-wiring 5 x 2.5 mm2.

Applications
TCW215 2x 36W/58W • Dust and moisture protected

Technical description
• Gear/power supply:
HF: 220 V - 240 V (HFP, HFR, EI*)
conventional: 230 V or 240 V
• Lamps: 1 and 2 TL-D fluorescent
• Connection: fused connection block optional
• Material: grey fibre glass reinforced polyester
housing and acrylic cover
* Electronic Included

Installation
• Quick installation. Mounting: individual or in-line.
• Separate access to ceiling clips possible via hatch
650ºC/30 sec 0.225 joules in the packaging.
• Easy ‘click’ installation by 2 stainless steel ceiling
fixation clips.
• Flexibility: variable fixation centres and different
cable entries possible.
Dimensions in mm • Pre-mounted cable entry.
• Easy electrical connection due to solid gear tray
suspension or KIT version with Waterproof
External Connector (WEC).

Accessories
Suspension hooks, through-wiring sets.

Product ID A A A B C
Nom Min Max
TCW215 18W 425 350 500 320 690
TCW215 36W 850 775 925 600 1300
TCW215 58W 850 775 925 600 1600

9.82 LUMINAIRES INDOOR

Waterproof luminaires Pacific TCW215

KIT version with lamps installed

and Waterproof External Connector
(WEC) for easy installation.
TCW215 1x 36W/58W
Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
TCW215 1xTL-D18W HFP PI 1,1 29171000
TCW215 1xTL-D18W IC PI 1,4 29131400
TCW215 1xTL-D18W/35 IC 240V SI 1,7 29231100
TCW215 1xTL-D18W I PI 1,3 29137600
TCW215 1xTL-D36W HFP PI 1,8 29173400
TCW215 1xTL-D36W EI PI 1,7 30001600
TCW215 1xTL-D36W IC PI 2,1 29133800
TCW215 1xTL-D36W/35 IC 240V SI 2,4 29233500
TCW215 1xTL-D36W I PI 2,0 29139000
TCW215 1xTL-D58W IC PI 2,8 29135200
TCW215 1xTL-D58W/35 IC 240V SI 3,1 29235900
TCW215 1xTL-D58W I PI 2,8 29141300
TCW215 2xTL-D18W HFP PI 1,5 29172700
TCW215 2xTL-D18W IC PI 1,7 29132100
TCW215 2xTL-D18W/35 IC 240V SI 2,3 29232800
TCW215 2xTL-D18W I PI 1,6 29138300
TCW215 2xTL-D36W HFP PI 2,3 29174100
TCW215 2xTL-D36W EI PI 2,3 30009200
TCW215 2xTL-D36W IC PI 3,0 29134500
TCW215 2xTL-D36W/35 IC 240V SI 3,5 29234200
TCW215 2xTL-D36W I PI 3,0 29140600
TCW215 2xTL-D58W IC PI 4,2 29136900
TCW215 2xTL-D58W/35 IC 240V SI 4,8 29236600
TCW215 2xTL-D58W I PI 4,1 29142000

LUMINAIRES INDOOR 9.83

Waterproof luminaires Pacific TCW216

Pacific TCW216
Functional shock-, vandal-, dust-, and jetproof
luminaire for TL-D and TL5 fluorescent lamps.
Fibre-glass reinforced polyester housing with a
polycarbonate prismatic clear cover.
Fixation of the cover to the housing without
additional lockers, but by innovative concept with
integrated fixation points. Gear tray, 2 stainless steel
ceiling fixation clips and cable entries (membranes)
supplied with the luminaire.
Lamps included with 240V versions.
Choice of different standard versions available:
• versions 1/2 x 18 W, 1/2 x 36 W, 1/2 x 58 W
(TL-D) and 1/2 x 49 W (TL5),
• emergency lighting, 1- or 3-hours,
• ready-to-install, including lamp(s) and Waterproof
TCW216 2x 36W/58W External Connector (WEC),
• equipped with through-wiring 5 x 2.5 mm2.

Applications
• Dust and moisture protected
• Impact protected

Technical description
• Gear/power supply:
HF: 220 V - 240 V (HFP, HFR, EI*)
conventional: 230 V or 240 V
• Lamps: 1 and 2 TL-D or TL5 (16 mm) fluorescent
• Connection: fused connection block optional
with • Material: grey fibre glass reinforced polyester
cable gland housing and polycarbonate cover
* Electronic Included
850ºC/5 sec 6 joules Note: sheet moulding compound (which is fibre-glass
reinforced polyester) materials can be recycled.

Dimensions in mm

Product ID A A A B C
Nom Min Max
TCW216 TL-D 18W 425 350 500 320 690
TCW216 TL-D 36W 775 850 925 600 1300
TCW216 TL5 49W/TL-D 58W 775 850 925 600 1600

9.84 LUMINAIRES INDOOR

Waterproof luminaires Pacific TCW216

Installation • Pre-mounted cable entry.

• Quick installation. • Easy electrical connection due to solid gear tray
• Mounting: individual or in-line. suspension, or KIT version with Waterproof
• Separate access to ceiling clips possible via hatch External Connector (WEC).
in the packaging.
• Easy ‘click’ installation by 2 stainless steel ceiling Accessories
fixation clips. • Suspension hooks
• Flexibility: variable fixation centres and different • Vandal-resistant lockers
cable entries possible. • Through-wiring sets

KIT version with lamps installed

and Waterproof External Connector
(WEC) for easy installation.
TCW216 1x 36W/58W

Preferred selection
Product ID Weight European Order
(kg) Code (EOC)
TCW216 1xTL-D18W IC PI 1,5 29143700
TCW216 1xTL-D18W/35 IC 240V SI 1,7 29237300
TCW216 1xTL-D18W I PI 1,4 29149900
TCW216 1xTL-D36W HFP PI 1,8 29185700
TCW216 1xTL-D36W EI PI 1,8 29972300
TCW216 1xTL-D36W IC PI 2,1 29145100
TCW216 1xTL-D36W/840 IC PI KIT 2,3 30997200
TCW216 1xTL-D36W/35 IC 240V SI 2,3 29239700
TCW216 1xTL-D36W I PI 2,1 29151200
TCW216 1xTL-D58W IC PI 2,9 29147500
TCW216 1xTL-D58W/35 IC 240V SI 3,1 29241000
TCW216 1xTL-D58W I PI 2,8 29153600
TCW216 2xTL-D18W IC PI 1,7 29144400
TCW216 2xTL-D18W/35 IC 240V SI 2,1 29238000
TCW216 2xTL-D18W I PI 1,6 29150500
TCW216 2xTL-D36W HFP PI 2,4 10347100
TCW216 2xTL-D36W EI PI 2,4 29986000
TCW216 2xTL-D36W IC PI 3,1 29146800
TCW216 2xTL-D36W/840 IC PI KIT 3,5 68200600
TCW216 2xTL-D36W/35 IC 240V EL3 SI 4,6 29336300
TCW216 2xTL-D36W/35 IC 240V SI 3,5 29240300
TCW216 2xTL-D36W I PI 3,1 29152900
TCW216 2xTL-D58W IC PI 4,3 29148200
TCW216 2xTL-D58W/35 IC 240V SI 4,8 29242700
TCW216 2xTL-D58W I PI 4,2 29154300

LUMINAIRES INDOOR 9.85

Waterproof luminaires Pacific TCW216/TCW215

Accessories for TCW215 and TCW216

ZCW216 TW ZCW216 LOC-VP ZCW216 HS

Through-wiring set. Vandal-resistant lockers (6 pcs). Bag of 20 suspension hooks.

Accessories for Weight European Order

TCW215 and TCW216 (kg) Code (EOC)
ZCW216 18 TW1-HF 16A CLI 0.07 29411799
ZCW216 18 TW3-HF 16A CLI 0.10 29413199
ZCW216 36 TW1-HF 16A CLI 0.13 29415599
ZCW216 36 TW3-HF 16A CLI 0.21 29417999
ZCW216 58 TW1-HF 16A CLI 0.15 29419399
ZCW216 58 TW3-HF 16A CLI 0.25 29421699
ZCW216 HS (20PCS) 0.03 29397499
ZCW216 LOC-VP (6PCS) 0.03 29395099

9.86 LUMINAIRES INDOOR

Waterproof luminaires Pacific TCW216/TCW215

LUMINAIRES INDOOR 9.87

Waterproof luminaires Pacific FCW196

Pacific FCW196
Functional shock-, vandal-, dust- and jetproof
luminaire for PL-L compact fluorescent lamps.
With opal or pearled cover.
4 internal clips (opal cover) or 4 corner screws and
internal clips (pearled cover) are supplied with the
luminaire. Also available as kombipack including
lamps.

Applications
• Dust and moisture protected
• Impact protected

Technical description
• Gear/power supply: conventional: 230 V or 240 V
• Lamps: 2 x 18 W PL-L compact fluorescent
FCW196 O (opal cover) • Housing: grey polycarbonate

Installation
• Mounting: individual.
• Method: holes for screw fixing. Closure of the
luminaire by 4 internal clips (opal cover) or
4 corner screws plus internal clips (pearled cover).

Dimensions in mm

9.88 INDOOR LUMINAIRES

Waterproof luminaires Pacific FCW196

FCW196 P (pearled cover)

Preferred selection
Product ID Weight Light Output European Order
(kg) Ratio (LOR) Code (EOC)
FCW196 2xPL-L18W I O 2.10 0.57 18383100
FCW196 2xPL-L18W/840 IC O 2.10 0.57 18609200
FCW196 2xPL-L18W/840 IC 240V O 2.10 0.57 18560600
FCW196 2xPL-L18W I P 2.10 0.65 18384800
FCW196 2xPL-L18W/840 IC P 2.10 0.65 18610800
FCW196 2xPL-L18W/840 IC 240V P 2.10 0.65 18561300

INDOOR LUMINAIRES 9.89

Waterproof luminaires TCW097

TCW097
Economical and functional shock-, dust- and
waterproof luminaire for TLD and TL5 fluorescent
lamps.The housing and the cover are made of high
quality polycarbonate, which make the TCW097 a
waterproof luminaire of outstanding quality.
Luminaire is completely sealed by stainless steel clips
that don’t fall off in case of maintenance.

Product Features
• Shockproof, dustproof and waterproof

Product Benefits
• Ingress Protection 65 (IP65)
• Gear tray and cover suspension system
• Fixed stainless steel clips
TCW097 • Durable polycarbonate housing and cover
• Excellent water and dust protection
• Easy installation and maintenance
• Optimum light distribution and performance

Dimensions in mm

Product ID A B C D
TCW097 1x18W 660 100 676 417
D D
TCW097 1x36W 1270 100 1276 880
TCW097 1x58W 1570 100 1586 590
TCW097 2x18W 660 150 676 417
TCW097 2x36W 1270 150 1276 880
TCW097 2x58W 1570 150 1586 590

9.90 LUMINAIRES INDOOR

Waterproof luminaires TCW097

Excellent water and dust protection Easy installation and maintenance Optimum light distribution and
performance

Preferred selection
Product ID Weight Order Code
TCW097 1x18W IC 220V IP65 2,07 8241 064 23080
TCW097 1x18W IC 230V IP65 2,07 8241 064 23180
TCW097 1x18W IC 240V IP65 2,07 8241 064 23280
TCW097 2x18W IC 220V IP65 2,32 8241 064 23380
TCW097 2x18W IC 230V IP65 2,32 8241 064 23480
TCW097 2x18W IC 240V IP65 2,32 8241 064 23580
TCW097 1x36W IC 220V IP65 3,04 8241 064 23680
TCW097 1x36W IC 230V IP65 3,04 8241 064 23780
TCW097 1x36W IC 240V IP65 3,04 8241 064 23880
TCW097 2x36W IC 220V IP65 4,07 8241 064 23980
TCW097 2x36W IC 230V IP65 4,07 8241 064 24080
TCW097 2x36W IC 240V IP65 4,07 8241 064 24180
TCW097 1x58W IC 220V IP65 4,80 8241 064 24280
TCW097 1x58W IC 230V IP65 4,80 8241 064 24380
TCW097 1x58W IC 240V IP65 4,80 8241 064 24480
TCW097 2x58W IC 220V IP65 7,83 8241 064 24580
TCW097 2x58W IC 230V IP65 7,83 8241 064 24680
TCW097 2x58W IC 240V IP65 7,83 8241 064 24780

LUMINAIRES INDOOR 9.91

Battens Pentura Mini

Pentura Mini
The ultra-slim bright TL5 batten is easy to install,
even where space is limited. Pentura Mini can easily
be connected to create elegant light lines.The slim
batten offers all the benefits of TL5 technology –
bright light, natural colours, small diameter, and
energy saving.The combination of the TL5 lamp
(included in the batten) and electronic gear saves up
to 40% on energy compared to conventional tubes.
In short, a highly cost-effective solution. A complete
choice of lamp wattages and lamp colours is available.

Applications
• Kitchens, bathrooms
• Cove lighting
• Under-shelf lighting
TCH128
Technical description
• Gear/power supply: HF 220-240V, 50-60Hz
• Lamps: 1xTL-5 (16mm) fluorescent. 14W, 21W,
28W
• Lamp colours: Cool white (840) or Cool daylight
(865)
• Polycarbonate housing and end caps
• Acrylic cover
• 10.000 hours maintenance-free operation of lamp
and gear
• Class II

Installation
• Lamp and cover are included
• Mounting accessories for ceiling / wall-mounting,
or suspension are included
• Electrical connection by push-in connector,
accessible via removable end-cap
• Through-wiring possibilities included
Dimensions in mm

Product ID L
TCH128 1 x 14W 623
TCH128 1 x 21W 923
TCH128 1 x 28W 1223

9.96 LUMINAIRES INDOOR

Battens Pentura Mini

Preferred selection
Product ID Lamp colour Weight (kg) European Order
Code (EOC)
TCH128 1xTL5-14W/840 HF Cool white 0.47 15324799
TCH128 1xTL5-14W/865 HF Cool daylight 0.47 15325499
TCH128 1xTL5-21W/840 HF Cool white 0.58 15326199
TCH128 1xTL5-21W/865 HF Cool daylight 0.58 15327899
TCH128 1xTL5-28W/840 HF Cool white 0.68 15328599
TCH128 1xTL5-28W/865 HF Cool daylight 0.68 15329299

LUMINAIRES INDOOR 9.97