JH145A Datasheet
Overview
The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support for medium and large enterprise
networks. JH145A supports 24 10/100/1000Base-T autosensing Ethernet ports and 4 SFP+ ports.
Quick Spec
Figure 1 shows the appearance of HPE JH145A.
Table 1 shows the quick spec.
Product Code JH145A
Type HPE FlexNetwork 5510 24G 4SFP+ HI 1-slot Switch
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T)
Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec
I/O ports and slots
4 SFP+ 10GbE ports
1 port expansion module slot
Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports or 2 40GbE ports, with optional module
1 dual-personality (RJ-45 or USB micro-B) serial console port
Additional ports and
1 RJ-45 out-of-band management port
slots
1 USB 2.0
1000 Mb Latency < 5 μs
10 Gbps Latency < 3 μs
Throughput up to 214 Mp/s
Routing/Switching
capacity 288 Gb/s
IPv4 : 32768 entries
Routing table size
IPv6 : 16384 entries
MAC address table size 32768 entries
Dimensions (W x D x H) 44.00 x 36.00 x 4.37 cm (17.32 x 14.17 x 1.72 in)
Weight 7.5 kg (16.53 lb)
Product Details
Figure 2 shows the front panel of HPE JH145A.
Note:
(1) 24 × 10/100/1000Base-T autosensing Ethernet port
(2) 4 × SFP+ port
(3) USB port
(4) Mini USB console port
(5) Console port (CONSOLE)
(6) Management Ethernet port
Figure 3 shows the back panel of HPE JH145A.
Note:
(1) Grounding screw
(2) Interface card (optional)
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2 (optional)
Compare to Similar Items
Table 2 shows the comparison.
Product Code JH145A JH146A JH147A JH148A JH149A
HPE FlexNetwork HPE FlexNetwork HPE FlexNetwork 5510 HPE FlexNetwork 5510 HPE FlexNetwork 5510
Type 5510 24G 4SFP+ HI 5510 48G 4SFP+ HI 24G PoE+ 4SFP+ HI 1- 48G PoE+ 4SFP+ HI 1- 24G SFP 4SFP+ HI 1-
1-slot Switch 1-slot Switch slot Switch slot Switch slot Switch
1000 Mb Latency < 5 μs < 5 μs < 5 μs < 5 μs < 5 μs
10 Gbps Latency < 3 μs < 3 μs < 3 μs < 3 μs < 3 μs
Throughput up to 214 Mp/s up to 250 Mp/s up to 214 Mp/s up to 250 Mp/s up to 214 Mp/s
Routing/Switching
288 Gb/s 336 Gb/s 288 Gb/s 336 Gb/s 288 Gb/s
capacity
IPv4 : 32768 entries IPv4 : 32768 entries IPv4 : 32768 entries IPv4 : 32768 entries IPv4 : 32768 entries
Routing table size
IPv6 : 16384 entries IPv6 : 16384 entries IPv6 : 16384 entries IPv6 : 16384 entries IPv6 : 16384 entries
Specification
JH145A Specifications
System specifications
Type HPE FlexNetwork 5510 24G 4SFP+ HI 1-slot Switch
I/O ports and slots · 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T)
· Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec
· 4 SFP+ 10GbE ports
· 1 port expansion module slot
· Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports
or 2 40GbE ports, with optional module
Additional ports and slots · 1 dual-personality (RJ-45 or USB micro-B) serial console port
· 1 RJ-45 out-of-band management port
· 1 USB 2.0
Performance
1000 Mb Latency < 5 μs
10 Gbps Latency < 3 μs
Throughput up to 214 Mp/s
Routing/Switching capacity 288 Gb/s
Routing table size IPv4 : 32768 entries
IPv6 : 16384 entries
MAC address table size 32768 entries
Physical specifications
Dimensions (W x D x H) 44.00 x 36.00 x 4.37 cm (17.32 x 14.17 x 1.72 in)
Weight 7.5 kg (16.53 lb)
Electrical specifications
Frequency 50/60 Hz
Maximum heat dissipation 365 BTU/hr (385.08 kJ/hr), Ranges from 167 BTU/hr to 392
BTU/hr, depending on power supply configuration
Voltage 100 - 240 V ac, rated (90 - 264 Vac, max)
-48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on
power supply chosen)
Maximum power rating 107 W
Idle power 55 W
PoE power NA
Environmental specifications
Operating temperature 0°C to 45°C (32°F to 113°F)
Operating relative humidity 10% to 90%, noncondensing
Nonoperating/Storage temperature -40°C to 70°C (-40°F to 158°F)
Nonoperating/Storage relative humidity 5% to 95%, noncondensing
Acoustic Low-speed fan: 52.8 dB, High-speed fan: 66.7 dB
ISO 7779
Safety and emissions
Safety UL 60950-1
EN 60825-1 Safety of Laser Products-Part 1
EN 60825-2 Safety of Laser Products-Part 2
IEC 60950-1
EN 60950-1
CAN/CSA-C22.2 No. 60950-1
FDA 21 CFR Subchapter J
ROHS Compliance
AS/NZS 60950-1
GB 4943 EAC (EurAsian Conformity Certification)
Emissions EMC Directive 2004/108/EC
FCC (CFR 47, Part 15) Class A
EN 61000-4-11:2004
ANSI C63.4-2009
EN 61000-3-3:2008
VCCI V-3/2012.04
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-4-3:2006
EN 61000-4-4:2012; EN 61000-4-5:2006
EN 61000-4-6:2009
CISPR 22:2008 Class A
EN 55022:2010 Class A
EN 61000-4-29: 2000
CISPR 24:2010
EN 300 386 V1.6.1
VCCI V-3/2013.04 Class A
Immunity Generic: EN 55024
ESD: EN300 386
Management IMC - Intelligent Management Center
Command-line interface
Web browser
SNMP manager
